Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BRACKET

Active
SPEFA5-26-T-0983Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a bracket component with part number 901-032-375-193 and NSN 1560-LL-NCB-9808, sourced from Bell Textron Inc and identified under cage code 97499. The item is designated as a critical application component with no shelf life requirement and must conform to drawing 901-032-375. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website, with control determined by the solicitation or award date depending on acquisition type. Identification of the item and its packaging must comply with MIL-STD-130N, and sampling procedures must adhere to MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with zero non-conformances required unless otherwise specified. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The contract mandates packaging in accordance with ASTM D3951, but all DLA Master List requirements take precedence, and all packaging must be marked and labeled per MIL-STD-129. Palletization must follow DLA packaging standards, with the unit of issue set at each (EA) and a total quantity of three units. Delivery is FOB destination, with an 83-day lead time from the original required delivery date of January 15, 2027. The item must be shipped to the designated freight address at Cherry Point, North Carolina, and delivered to the parcel post address for receipt. The solicitation number is SPEFA5-26-T-0983, issued by the Defense Logistics Agency Fleet Readiness Center, with Larry Kemp listed as the primary point of contact, and the contract falls under NAICS code 488190 for other transportation support activities.

General Info

Procure three critical bracket components per drawing 901-032-375, FOB destination, 83-day lead time, MIL-STD compliant, delivered to Cherry Point.

Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSCView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

PSC 8021, CHERRY POINT, NC, 28533-0021, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPEFA5-26-T-0983

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA FLEET READINESS CENTER DLA PSC
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA FLEET READINESS CENTER DLA PSC
View Agency Profile
Office AddressUS
Contacts
Larry Kemp
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRACKET
BRACKET
IN ACCORDANCE WITH DRAWING:901-032-375
CAGE:97499, BELL HELICOPTER
P/N: 901-032-375-193
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
MIL-STD-130N(1) DATED 16 NOV 2012.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
BELL TEXTRON INC 97499 P/N 901-032-375-193
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPEFA5-26-T-0983
SECTION B
PR: 7017787494 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017787494 0001 EA 3.000
NSN/MATERIAL:1560LLNCB9808
DELIVERY (IN DAYS):0083
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
PSC 8021
CHERRY POINT NC 28533-0021
US
FREIGHT SHIPPING ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
BEACHEY ROAD, BUILDING 148, BAY C
CHERRY POINT NC 28533-5040
US
Need Ship Date:00/00/0000 Original Required Delivery Date:01/15/2027
SPEFA5-26-T-0983 NSN/Part Number: 1560-LL-NCB-9808 Quantity: 3 EA Purchase Request: 7017787494QTY: 3 Delivery: 83 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
GEAR, INTERNAL
Solicitation # SPE4A6-26-T-14PL
The contract specifies the procurement of an internal gear with NSN 3020-01-666-8079 and part number 06354-08011-101, quantity of five units, under solicitation SPE4A6-26-T-14PL. Delivery is required within 57 days, with a required delivery date of August 7, 2026, and must be shipped FOB origin to the destination at DLA Distribution Cherry Point in North Carolina. The item is classified as a critical application item, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, materials, and unit container codes, with marking following MIL-STD-129 and no special marking codes. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. Acceptance occurs at the destination, with no variance allowed in quantity. Source approval documentation is required under RC001, and transportation logistics follow DLA procedural notes C19 and C20. The contract is issued under the DoD authorized unit of issue, with the purchase request number 7017804317 and total price of $5.00.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
ROD ASSEMBLY
Solicitation # SPEFA5-26-T-0982
The contract pertains to the procurement of one rod assembly with part number 26000486 and NSN 2910-LL-NCA-6366, issued by the Defense Logistics Agency under solicitation SPEFA5-26-T-0982. The item is designated as a critical application component with no shelf life requirement and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards. Sampling and inspection protocols must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified; attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization in accordance with DLA packaging requirements, and all units must be packed as one unit of issue per shipment. Delivery is due in five days FOB destination, with inspection and acceptance occurring at the destination point, and no quantity variance is permitted. The item must be shipped via the fastest traceable means, explicitly prohibiting parcel post, to the designated freight address at Cherry Point, North Carolina. The required delivery date is August 10, 2026, and the contract includes specific government identifiers for processing and tracking.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
CLEANING SOLVENT, GE
Solicitation # SPE8E5-26-T-3950
The contract is for the procurement of CLEANING SOLVENT, GE with NSN/Part Number 7930-01-367-0996,Quantity of 1 CO, under Purchase Request 7017805998, with delivery required within 20 days after award. The solicitation number is SPE8E5-26-T-3950, posted on August 9, 2026, with responses due by August 20, 2026, issued by the Defense Logistics Agency under the Department of Defense. The item is categorized under NAICS code 488190 and is subject to strict export control regulations under ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, regardless of location, requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and only contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and approved access through the DLA questionnaire may handle the data. The contract also requires the vendor to be a CMMC Level 2 Certified Third-Party Assessment Organization. The primary point of contact is Devin Duffy, reachable via email and phone listed in the contract details.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
WEIGHT, COUNTERBALAN
Solicitation # SPE4A1-26-T-2533
This contract pertains to the procurement of two counterbalance weight units identified by NSN 3040-01-714-2396 and part number 06130-11206-101, issued under solicitation SPE4A1-26-T-2533 by the Department of Defense’s Aviation Supply Chain. The items must be delivered within 84 days to DLA Distribution Cherry Point in North Carolina, with delivery terms FOB origin and inspection and acceptance occurring at the destination. No quantity variance is permitted, and packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging standards, including packaging code U, preservation method 10, and container type E5. Marking must comply with MIL-STD-129, with no special marking required. The contract mandates zero-defect acceptance under a zero-based sampling plan per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. Documentation for source approval must meet RC001 standards, and covered defense information protocols apply under RD002. The total contract value is $2.00 per unit for two units. The original required delivery date is August 7, 2026, and all transportation logistics follow DLA procedural notes C19 and C20.
AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
TAPE, PRESSURE SENSITIV
Solicitation # SPE8EN-26-T-2866
This contract pertains to the procurement of pressure-sensitive adhesive tape with specific technical, packaging, and quality requirements governed by the DLA Master List of Technical and Quality Requirements, identified by R and I numbers. The item is classified as a TYPE I (CODE M) with a strict 24-month non-extendable shelf life, and vendors must label and date the material appropriately prior to delivery. The tape must be free from intentional addition of mercury or mercury-containing compounds, except in specific exemptions such as batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for shelf-life items, and palletization must adhere to DLA packaging standards. Hazardous material shipping protocols under IP025 and proper unit of issue designation apply, with delivery required FOB destination within 20 days. The contract specifies a quantity of 12 RO (roll units) under purchase request 7017784101, with the NSN 7510-01-358-8770, and the item must be delivered to the designated military destination in Yokosuka, Japan. The delivery deadline is August 5, 2026, and the solicitation number is SPE8EN-26-T-2866. The vendor is responsible for ensuring all documentation, marking, and packaging align with DLA requirements, including proper labeling and adherence to packaging, marking, and shipping protocols. The contract designates the DoD authorized unit of issue and references official sources for unit conversion, with inspection and acceptance occurring at the destination. Vendor compliance with technical specifications, mercury restrictions, shelf-life controls, and packaging standards is mandatory, and failure to meet these conditions will result in non-acceptance of the supplies.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
LOCKNUT, OIL COOLER
Solicitation # SPE4A6-26-T-14MG
The contract specifies the procurement of two locknuts for an oil cooler, identified by NSN 1680-01-670-2483 and part number 06362-08049-101, with a total quantity of two units at a unit price of $2.00. Delivery is required within 84 days of contract award, with shipment FOB origin and no variance allowed in quantity. All items must be packaged in accordance with ASTM D3951 and labeled per MIL-STD-129, with palletization following DLA Packaging Requirements, while adhering to the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. Inspection and acceptance occur at the destination, and sampling must comply with MIL-STD-1916 or ASQ H1331, ensuring zero non-conformances unless otherwise stated, with attributes prioritized as critical, major, or minor per defined verification levels or AQLs. Packaging and marking must include proper government identification removal for non-accepted supplies and bare item marking as required. Delivery is to DLA Distribution Cherry Point in North Carolina, with transportation governed by DLAD procedural notes. The contract was issued under solicitation SPE4A6-26-T-14MG with a response deadline of August 17, 2026, and the original required delivery date is June 3, 2027.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
CONNECTOR
Solicitation # SPEFA3-26-T-0343
This contract is for the procurement of 10 units of Connector, identified by NSN 5935-LN-003-5697 and part number 8011-00002, under solicitation SPEFA3-26-T-0343. Delivery is required within five days of award, with FOB destination terms, and no variance in quantity is permitted. Inspection and acceptance occur at the destination facility, the Fleet Readiness Center Southeast in Jacksonville, Florida. The item is not subject to shelf life requirements, and unique item identification is not mandated per customer request. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking, with palletization following DLA’s RP001 packaging standards, and the DLA Master List of Technical and Quality Requirements supersedes any conflicting specifications. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attributes are verified at specified levels. All shipments must use traceable freight methods and not parcel post. The unit of issue is each, priced at $10 per unit, totaling $100. The required delivery date is July 21, 2026, and the contract references specific DLA technical, quality, and packaging directives applicable to the acquisition.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
International Freight and Delivery LogisticsThe contract mandates the arrangement and execution of an international shipment for a mounting bracket from the United States to Camp Carroll in South Korea, with delivery required no later than August 14, 2026. Transportation must be performed under FOB destination terms, meaning the seller bears all costs and risks until the goods arrive at the final destination. Compliance with DPAS regulations is mandatory to ensure priority handling consistent with national defense requirements. The provider is responsible for securing all necessary customs clearances and documentation to facilitate smooth transit across international borders without delays. The performance is classified under NAICS code 488190, indicating it involves other support activities for air transportation, and is officially categorized as a subcontract issued by the Defense Logistics Agency under the Department of Defense. The shipment must be managed with precision to meet the strict deadline, accounting for all logistical, regulatory, and operational challenges inherent in cross-border defense-related cargo movement.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 488190
New
Federal
Government-Furnished Material (GFM) / Export & Shipping ComplianceThe contract requires coordination of FOB contractor deliveries to an overseas military location, specifically addressing compliance with export control regulations, MIL-STD-129 packaging standards, and WAWF documentation procedures. The work involves ensuring all shipments to the APO 09461 destination meet federal and defense-specific logistical requirements, with strict adherence to international shipping protocols and defense export laws. The contractor must manage the end-to-end supply chain process from final preparation to secure delivery, maintaining full traceability and regulatory compliance throughout. This subcontract, posted under NAICS code 488190, is issued by the Department of Defense under office FA5587 48 Cons and carries a response deadline of August 20, 2026. All activities must align with U.S. government standards for military logistics, including proper labeling, documentation, and customs clearance for overseas military posts. The successful bidder will be responsible for integrating with existing defense logistics systems, ensuring timely and accurate submission of export records, and confirming that all packaging and shipping practices conform to military specifications without deviation.
FA5587 48 Cons (admin Only No Req)

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
Federal
Repair of Panel Control, Elec and Multichannel
Solicitation # 70Z03826QH0000077
This solicitation, numbered 70Z03826QH0000077, is a combined synopsis and request for quotation under FAR Subpart 12.201 for the repair or evaluation of a PANEL, CONTROL, ELECT with NSN 6110-01-433-4990 and part number 712940-1, classified under NAICS code 488190. The requirement is unrestricted with a small business size standard of $40,000,000, and no set-aside is in effect. The U.S. Coast Guard anticipates awarding a firm-fixed price purchase order on a sole-source basis to G.E. AVIATION (CAGE: 19623) based on fair and reasonable pricing and an affirmative responsibility determination. The solicitation, issued as an RFQ, has undergone multiple extensions, with the final closing date set for August 7, 2026, at 12:00 PM EDT. Quotes must be submitted via email to designated addresses, with the RFQ number included in the subject line. The contract requires full technical data access, proof of ability to update technical documentation using a TODO account or signed DD-2345, and airworthiness certification for all overhauled items, which may be demonstrated via FAA 8130 certification or equivalent. The scope includes repair, determination of beyond economic repair status, or no fault found findings, with each交付 item requiring a certificate of conformance per FAR 52.246-15, complete with NSN, part number, serial number, and purchase order number. Packaging must comply with ASTM D3951-15 and best commercial practices, excluding popcorn, shredded paper, Styrofoam, or peanut packaging; items must be individually packaged and labeled with shipping documentation on both the exterior and interior of the container. Delivery is to the USCG Aviation Logistics Center in Elizabeth City, NC, under F.O.B. Destination terms with receiving hours from 6:00 AM to 3:30 PM. The government may exercise an option under FAR 52.217-6 to increase the quantity by two additional units, for a maximum of three total, at the original unit price within 365 days after award. All contractor records must be maintained per FAR 4.7,
Aviation Logistics Center (ALC)(00038)

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 488190
New
SLED
International Shipping and Tariff Management
Texas A&M University

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 488190
New
Federal
Biotech Logistics and Cold Chain DistributionThe contract calls for specialized logistics services focused on the packaging, labeling, and shipment of temperature-sensitive biologic reagents requiring stringent cold chain protocols, including maintenance at -80°C throughout运输. The work involves rigorous compliance with controlled environmental standards to preserve sample integrity, ensuring that all handling, documentation, and transport adhere to industry-specific biologic shipment requirements. This subcontract is issued under the NAICS code 488190, which covers other support activities for air transportation, indicating a need for highly coordinated, specialized distribution beyond standard freight services. The National Institutes of Health, specifically NIDA under the Department of Health and Human Services, is the agency overseeing this procurement with a response deadline of August 13, 2026. While the exact place of performance is not specified, the nature of the work implies coordination across multiple facilities and potentially international points of delivery. Bidders must demonstrate proven experience in cold chain management for biologics, including validated packaging solutions, real-time temperature monitoring, contingency protocols for deviations, and compliance with regulatory expectations for biological material transport. All proposals must be submitted by the stated deadline to be considered for award.
National Institutes Of Health Nida

POSTED

3 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

Same awarding agency

NAICS: 541214
New
DIBBS
Small Business Subcontracting & Accelerated Payments Coordination
Payroll Services

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 541512
New
DIBBS
NIST SP 800-171 Compliance & Cybersecurity Assessment
Computer Systems Design Services

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling
Other Scientific and Technical Consulting Services

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
FLEX DUCT ASSEMBLY Manufacturing & Delivery
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
Manufacture and Supply of CAP R/H (Right-Hand Cap)The contract calls for the manufacture, quality assurance, packaging, and delivery of three right-hand caps designated by NSN 1560LLNC08715, specifically designed for military use and fully compliant with DLA technical standards and MIL-STD-130N(1) marking requirements. Each unit must meet stringent durability, dimensional, and performance specifications to ensure operational readiness and uniformity within defense logistics systems. The work requires rigorous quality controls throughout production, including inspection protocols and documentation to verify adherence to all military standards. Performance of the contract is centered at Cherry Point, North Carolina, with an anticipated delivery timeline tied to the submission deadline of August 13, 2026. The solicitation, issued under the NAICS code 332999 for other fabricated metal product manufacturing, is structured as a subcontract award managed by the Department of Defense through the DLA Fleet Readiness Center DLA PSC. All deliverables must be properly labeled and packaged per federal defense guidelines to enable seamless integration into supply chains and inventory systems. The award will be processed through the DIBBS portal, and successful vendors must demonstrate proven capability in producing defense-grade components with full traceability and compliance.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 332994
New
DIBBS
Supply of Hose Assembly (NSN: 1560LLNCB5943)The contract requires the manufacture and delivery of three units of a specific hose assembly identified by NSN 1560LLNCB5943, with strict adherence to technical and quality standards set by the Defense Logistics Agency. All assemblies must comply with OSHA hazardous materials labeling requirements to ensure safe handling and transport. The work is to be performed under a subcontract arrangement, with the place of performance located in Cherry Point, North Carolina, at the DLA Fleet Readiness Center. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, leaving a narrow window for proposals. The NAICS code 332994 indicates the work falls under other fabricated metal product manufacturing, emphasizing precision fabrication and compliance with military specifications. Although no set-aside type is specified, the contract is managed by the Department of Defense through its logistics branch, underscoring its critical nature for defense readiness.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 488190
New
DIBBS
FLEX DUCT ASSEMBLY
Solicitation # SPEFA5-26-T-0976
The contract pertains to the procurement of a Flex Duct Assembly, identified by part number 126657-914 and NSN 2835-LL-NC0-4571, with a quantity of 25 units to be delivered FOB destination within 132 days from the order placement. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards unless explicitly overridden by contract specifications. Verification and sampling follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is to be packaged in accordance with ASTM D3951 but must fully comply with the more stringent DLA packaging requirements, including MIL-STD-129 labeling and RP001 palletization standards. Identification marking must adhere to MIL-STD-130N dated November 16, 2012, and the product has no shelf life restriction. The contract is issued under solicitation SPEFA5-26-T-0976 as a Total Small Business Set-Aside under NAICS code 488190, with a fixed unit price of $25 per unit and a total contract value of $625. Delivery is to be made to the Fleet Readiness Center DLA in Cherry Point, North Carolina, with inspection and acceptance occurring at the destination. The original required delivery date is August 4, 2026, and all packaging and marking must reflect the specified unit of issue and quantity per unit pack as outlined in the purchase order.
Other Support Activities for Air Transportation

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 488190
New
DIBBS
CAP R/H
Solicitation # SPEFA5-26-T-0979
This contract pertains to the procurement of three units of item NSN 1560-LL-NC0-8715 with part number 212-030-241-16 manufactured by Bell Textron Inc, designated as a critical application item with no shelf life requirement. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards, and include compliance with MIL-STD-130N for identification marking of U.S. military property. Sampling and inspection protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes not explicitly defined are treated as major with corresponding verification levels or AQLs. Packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA requirements, and all units must be marked and labeled in accordance with MIL-STD-129, palletized per RP001, and shipped as a single unit of issue. Delivery is FOB destination with a strict 43-day lead time from the contract award, and final inspection and acceptance occur at the destination site with no tolerance for quantity variance. The shipping address is Building 148, Bay C, Beachey Road, Cherry Point NC 28533-5040, while the parcel post address is PSC 8021, Cherry Point NC 28533-0021. The original required delivery date is October 20, 2026, and the contract unit price is $3.00 per unit for a total value of $9.00. The solicitation number is SPEFA5-26-T-0979, issued by the DLA Fleet Readiness Center with primary point of contact Larry Kemp, and the North American Industry Classification System code is 488190. Compliance with DoD unit of issue standards and accurate labeling per the provided DLA guidelines are mandatory for contract fulfillment.
Other Support Activities for Air Transportation

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 488190
New
DIBBS
HOSE ASSEMBLY
Solicitation # SPEFA5-26-T-0980
This contract pertains to the procurement of a hose assembly identified by NSN 1560-LL-NCB-5943 and part number M83796/1-J-150A, with a quantity of three units to be delivered within fifteen days of contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards unless otherwise specified. The product must be marked in accordance with MIL-STD-130N and packaged per ASTM D3951, with labeling and unit packaging strictly aligned with MIL-STD-129 and DLA Packaging Requirements. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in the sample lot unless otherwise directed, and critical attributes are subject to the strictest verification levels. The hose assembly is designated as a critical application item with no shelf life requirement and must be delivered FOB destination, with inspection and acceptance occurring at the delivery point. Packaging must be palletized per DLA guidelines, and each unit must be labeled with the correct Unit of Issue and Quantity per Unit Pack as specified. Delivery is due by October 3, 2026, with the final destination being the Fleet Readiness Center at Cherry Point, North Carolina, and shipments must comply with all federal shipping and marking specifications.
Other Support Activities for Air Transportation

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 488310
New
DIBBS
Sea Transportation of Supplies (International Delivery)
Port and Harbor Operations

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data Management
Environmental Consulting Services

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Labeling Services
Packaging and Labeling Services

POSTED

5 days ago

DEADLINE

in 3 days
View Details