Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BRACKET, STRUCTURAL

Active
SPE4A6-26-T-13YPFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a structural bracket, identified by NSN 1560-01-444-1510 and part number 5-95575-5, with a quantity of eight units to be delivered within 382 days from the contract award. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance is permitted in quantity. The item is not subject to a shelf life requirement and does not require unique identification under DFARS 252.211-7003. Technical and quality standards are governed entirely by the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must comply with MIL-STD-129 and DLA-specific requirements, with hazardous materials following Fed-Std-313 and TQ IP025, while non-hazardous items must meet commercial packaging standards only if not overridden by DLA mandates. Palletization must adhere to RP001 guidelines. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are categorized with strict verification levels or AQLs. The contractor must comply with tailored and non-tailored quality requirements including ISO 9001:2015 and complete a CMMC Level 2 self-assessment. All documentation and labeling must conform to the referenced DLA standards, and the deliverable is to be shipped to the DLA Distribution Center in New Cumberland, Pennsylvania. The contract is issued under solicitation SPE4A6-26-T-13YP, with pricing set at $8.00 per unit, totaling $64.00, and the required delivery date is January 9, 2027.

General Info

Eight structural brackets delivered FOB origin by January 9, 2027, at $8 each, per DLA specs.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-13YP for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
SHAMEKA EDWARDS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRACKET,STRUCTURAL
BRACKET,STRUCTURAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
THE BOEING COMPANY 81205 P/N 5-95575-5
SPE4A6-26-T-13YP
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017766911 0001 EA 8.000
NSN/MATERIAL:1560014441510
DELIVERY (IN DAYS):0382
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
SPE4A6-26-T-13YP
SECTION B
PR: 7017766911 PRLI: 0001 CONT’D
US
Need Ship Date:00/00/0000 Original Required Delivery Date:01/09/2027
SPE4A6-26-T-13YP NSN/Part Number: 1560-01-444-1510 Quantity: 8 EA Purchase Request: 7017766911QTY: 8 Delivery: 382 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336411
New
DIBBS
BRACKET, STRUCTURAL
Solicitation # SPE4A7-26-T-619L
The contract pertains to the procurement of 16 structural brackets with NSN 1560-01-360-0258 under solicitation SPE4A7-26-T-619L, with a response deadline of August 13, 2026, and delivery required within 107 days after award. The item is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, applicable revision determined by the solicitation timeline. The contractor must comply with DLA packaging requirements, CMMC Level 2 certification through a certified third-party assessment organization, and physical identification marking of the bare item. Covered defense information requirements apply, and inspection and acceptance occur at the origin. Government identification must be removed from non-accepted supplies. Although item unique identification is not required, DFARS 252.211-7003(c)(1)(i) governs this exclusion. Technical data associated with the item is subject to export controls under ITAR or EAR, with strict prohibitions on disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Only contractors with valid US/Canada Joint Certification Program certification, completion of required DOD export control training, approval from DLA, and completion of the DLA export-controlled data questionnaire may access such technical data. The place of performance is Robins Air Force Base, Georgia, and the contracting office is under the Department of Defense, with Heriberto Lopez-Rivera as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
LIGHT SET, GENERAL I
Solicitation # SPE8E7-26-T-3512
This contract, identified as SPE8E7-26-T-3512, is a total small business set-aside for the procurement of 62 units of LIGHT SET, GENERAL ILLUMINATION with NSN 6230-01-596-4722 and part number 31-ISL-BB, at a unit price of $62.00, totaling $3,844.00. Delivery is required FOB origin within 117 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must strictly adhere to DLA’s packaging requirements RP001 and MIL-STD-129 for labeling and marking, with commercial packaging compliant to ASTM D3951 unless the item is classified as hazardous under FED-STD-313, in which case TQ requirement IP025 governs. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The unit of issue is each, with quantity per unit pack specified as 001, and palletization must follow DLA guidelines. The contract mandates delivery to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with parcel post and freight shipping addresses identical. Transportation must comply with DLAD Proc Notes C19 and C20. The original required delivery date is March 17, 2027, but a need ship date of August 6, 2026, indicates an earlier anticipated shipment timeline. The solicitation was issued on August 5, 2026, with responses due by August 17, 2026, under a Small Business Administration set-aside for NAICS code 336411. Primary point of contact is Kelly Mitchell, reachable via email and phone, and all contractual obligations must align with the applicable revision of the DLA Master List as of the solicitation issue date. The contract is issued under the DoD’s authorized unit of issue framework and includes provisions for the removal of government identification from non-accepted supplies, with covered defense information potentially applying.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336411
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7M5-26-T-368C
This contract specifies the procurement of one electrical solenoid, identified by NSN 5945-01-338-5435 and part number 61245 from Getinge USA Inc., with delivery required within 20 days FOB origin. The unit of issue is one each, with no variance allowed in quantity. All supplies must comply with DLA packaging requirements, including commercial packaging standards and protection against damage during transit. Each unit must be sealed in a suitable container and packed in exterior shipping containers that ensure safe delivery at the lowest transportation cost. Palletization is mandatory for shipments exceeding 250 pounds or 20 cubic feet, using Type IV or Type V 4-way entry pallets measuring 40 by 48 inches, with total load dimensions capped at 54 inches in height, 43 inches in length, and 52 inches in width. Exceptions apply for oversized items, requiring coordination with the contracting officer. The solenoid must be free from intentional addition of mercury or mercury-containing compounds, except in narrowly defined cases such as batteries, instruments, or weapons systems specified by NAVSEA, and portable devices containing mercury must have shockproof design and a secondary containment. Marking requirements follow Medical Marking Standard No. 1, superseding MIL-STD-129 for all medical acquisitions, and include NSN, government quantity, and unit of issue on each unit. Additional labeling must comply with IPC/JEDEC J-STD-609 for lead-free component identification. Passive RFID tags are required for shipments to DLA distribution locations, unless exempted by FSC codes 6505, 6508, 6509, or 6550. Wood packaging material must be heat-treated or kiln-dried per DOD requirements. Deliveries are directed to USS TRIPOLI LHA 7 in FPO AP, and the contract explicitly prohibits removal of government identification from non-accepted supplies. All technical and quality requirements are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.
ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336411
New
DIBBS
DEFLECTOR, INBOARD T
Solicitation # SPE4A7-26-T-625A
The contract pertains to the procurement of a DEFLECTOR, INBOARD BRACKET ASSEMBLY for a tail rotor driveshaft, identified by part number 7-311930021-7 and NSN 1615015316855, with a total quantity of seven units. The item is classified as a critical application component and is covered under defense information protocols, though Item Unique Identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). The material has no shelf life constraints and must be packaged in compliance with ASTM D3951, with all markings and labeling adhering strictly to MIL-STD-129, while prioritizing the DLA Master List of Technical and Quality Requirements where applicable. Palletization must conform to DLA Packaging Requirement RP001, and the unit of issue is each (EA), with no variance permitted in quantity. Delivery is scheduled 578 days from the contract date, with an original required delivery date of March 14, 2028, and shipment must be FOB origin. Inspection and acceptance occur at the destination facility located at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. Transportation details are governed by DLAD Procurement Notes C19 and C20, and the contracting office is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation number is SPE4A7-26-T-625A, with a single line item priced at $7.00 per unit, totaling $49.00. The point of contact is Jack Bolan, with procurement governed under NAICS code 336411 for aircraft parts manufacturing.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
SUPPORT, CONDENSER, W
Solicitation # SPE4A5-26-T-307C
The contract pertains to the procurement of five units of a condenser support component, identified by part number 176445:1030 and NSN 1660-00-884-9211, under solicitation SPE4A5-26-T-307C. Delivery is required within 169 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. The item is designated as a critical application component, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s procurement packaging requirements, and no unit of issue variance is permitted. Quality assurance follows MIL-STD-1916 or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and remove all government identification from non-accepted supplies. The delivery destination is Tinker AFB, Oklahoma, with the original required delivery date set for March 1, 2028. The contract incorporates mandatory DLA procedural notes for transportation and requires compliance with all referenced specifications, including the absence of item unique identification as per the service customer’s request, and all documentation and labeling must be executed precisely under the governing DLA standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336411
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L1-26-T-918V
This solicitation, identified as SPE7L1-26-T-918V, seeks five units of an item with NSN 0001S00000052 under the Government First Artic contract, with delivery required 449 days after award. The acquisition is open to full and open competition and incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. Compliance with DLA packaging standards, removal of government identification from non-accepted supplies, and configuration change management through Engineering Change Proposals or variance requests are mandatory. Technical data associated with this item is subject to export control under either ITAR or EAR, requiring prior governmental authorization for any disclosure to foreign persons or entities, including foreign national employees and subsidiaries of U.S. companies. Only contractors with approved US/Canada Joint Certification Program status, who have completed required DLA export control training and questionnaire, and have received explicit authorization from DLA are permitted to access or handle such controlled data. The performance location is Robins AFB, GA, with a response deadline of August 17, 2026, and the primary point of contact is Jarod More at the Defense Logistics Agency.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336411
New
DIBBS
TURBINE WHEEL, AIRCRAFT
Solicitation # SPE4A5-26-T-333B
The contract specifies the procurement of 16 aircraft cooling turbine wheels, part number 785687-3, manufactured by Hamilton Sundstrand Corporation, under solicitation SPE4A5-26-T-333B. The item is classified as a critical application component and must comply with all applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards. Packaging must adhere to MIL-STD-129 and ASTM D3951, with palletization following DLA Packaging Requirements, and no Unit Unique Identification is required per customer request. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The supplier must comply with CMMC Level 2 self-assessment and configuration change management protocols, and all non-accepted supplies must have government identification removed. Delivery is FOB origin with a 170-day lead time, set for January 31, 2027, and inspection and acceptance occur at the destination. The item is to be delivered to DLA Distribution Depot Oklahoma at Tinker AFB, and transportation and shipping instructions follow DLA procedural notes. The unit of issue is each, with a total contract value based on a unit price and fixed quantity with no variance allowed.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
COUNTERWEIGHT, TAIL
Solicitation # SPE4A7-26-T-621Q
The contract pertains to the procurement of 161 units of a counterweight for a tail rotor, identified by NSN 1615-01-096-5433, under solicitation SPE4A7-26-T-621Q. The delivery timeline requires fulfillment within 93 days of award, with the solicitation issued on August 5, 2026, and responses due by August 13, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent export controls under ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons or entities without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and questionnaire, and received formal approval from DLA. Packaging must comply with DLA standards, and the item must be physically marked per RQ017. Configuration changes require formal engineering change proposals, and inspection and acceptance occur at origin. Non-accepted supplies must have government identification removed. The place of performance is specified as New Cumberland, Pennsylvania, with the contracting office under the Department of Defense’s ASC Supplier Oper AE and AF Division, and Mahlon Marcus serving as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
LIGHT, HEAD, GENERAL
Solicitation # SPE8E7-26-T-3507
The contract specifies the procurement of 289 units of a headlight assembly designated by part number YUKON HL and NSN 6230015774782 under solicitation SPE8E7-26-T-3507, issued by the Defense Logistics Agency District San Joaquin. Delivery is required in 54 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination warehouse in Tracy, California. Packaging must comply with DLA’s master technical and quality requirements, prioritizing those referenced by R or I numbers over ASTM D3951, and all items must be labeled and marked according to MIL-STD-129. Non-hazardous materials must be commercially packaged per SPE8E7-26-T-3507, while hazardous items must meet FED-STD-313 and TQ requirement IP025. Palletization follows RP001 packaging standards, and the unit of issue is each. The delivery address for both freight and parcel post is the same DLA receiving warehouse in Tracy, CA. The original required delivery date is October 27, 2026, with a need ship date of October 11, 2026. The contract references specific transportation procedures and designates Kelly Mitchell as the primary point of contact.
DLA DIST SAN JOAQUIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336411
New
DIBBS
WINDOW PANEL, AIRCRA
Solicitation # SPE4A7-26-T-619U
The item is a window panel for aircraft with the NSN 1560-00-092-2916, with a quantity of 37 units ordered under purchase request 7017200773. The procurement is part of a federal solicitation issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with the solicitation number SPE4A7-26-T-619U, posted on August 5, 2026, and responses due by August 13, 2026. Delivery is required within 121 days after delivery order issuance, and performance will occur at Tinker AFB, Oklahoma, with a zip code of 73145-8000. Primary point of contact is Nya Currie, reachable via email and phone provided. This technical item contains data subject to export control under either ITAR or EAR, meaning any transfer, including disclosure to foreign nationals within the United States, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies, and distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed required training on handling DOD export-controlled technical data, and have been formally approved by DLA to access such data. The NAICS code is 336411, indicating classification under aircraft manufacturing.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-624Q
The contract is for the procurement of nine aircraft stiffeners with the NSN/part number 0001S00000052, under solicitation SPE4A7-26-T-624Q, with a delivery requirement of 840 days after award. The item is subject to strict export controls under either ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons, including foreign nationals within the United States or overseas, without prior written authorization from the Department of State or the Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled technical data, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA questionnaire, are permitted access. Distribution is tightly restricted to ensure compliance with U.S. national security requirements. The contract is administered by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance to occur at Robins Air Force Base, Georgia, 31098-1887. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026. Primary point of contact is Ari'ana Burnett, reachable via email at ariana.rollins@dla.mil. The NAICS code 336411 identifies the industry as aircraft manufacturing, and the procurement is classified as a federal acquisition with no set-aside designation. All parties must adhere to DLA packaging requirements and export control protocols as specified, with noncompliance resulting in contractual and legal repercussions.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
LINER, LATRINE
Solicitation # SPE8E8-26-T-5089
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561730
New
DIBBS
Erosion Control and Landscaping
Landscaping Services

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Signage
All Other Support Services

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332312
New
DIBBS
Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Remediation
Environmental Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Acceptance SupportThe contract entails performing comprehensive quality inspections for incoming and outgoing shipments at the origin location, adhering strictly to MIL-STD-1916 and AQL sampling standards to ensure all products meet government acceptance criteria. This work is critical to verifying compliance with military specifications before delivery, requiring precise execution of inspection protocols and documentation to support final acceptance by the Department of Defense. The performance location is designated as Robins AFB, Georgia, with all inspections to be conducted in alignment with the specified military standards. This is a small business set-aside subcontract under the NAICS code 541330, reserved exclusively for total small businesses as defined by the SBA, with a response deadline of August 13, 2026. The solicitation originates from the ASC Commodities Division, part of the Department of Defense, underscoring its importance to defense logistics and supply chain integrity. All work must be completed in accordance with federal acquisition regulations, and the contractor is expected to maintain rigorous quality controls to uphold the standards required for government contracts.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Shipping to DLAThe contract requires the transportation and shipping of packaged and labeled bolts from the origin point to DLA Distribution Warner Robins, GA, with strict adherence to DPAS priority rating, FOB origin terms, and the use of U.S.-flag vessels if ocean freight is involved. All shipments must comply with federal regulations governing defense logistics, ensuring timely and secure delivery to the specified performance location at Robins Air Force Base, Georgia. The requirement emphasizes full compliance with transportation standards and documentation to meet Department of Defense supply chain protocols. This subcontract is a Total Small Business Set-Aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5, with the NAICS code 484220 indicating it pertains to truck transportation of freight. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Interested parties must submit proposals through the DIBBS portal, and all logistical operations must align with federal procurement and national security shipping mandates.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details