Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BRACKET, VEHICULAR C

Active
SPE7L1-26-T-858FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of one unit of a vehicular bracket designated by part number LS1104696 and NSN 2590-01-661-6799, issued under solicitation SPE7L1-26-T-858F by the Department of Defense through the Land Supply Chain. The item must be delivered within five days to Fort Benning, Georgia, FOB origin, with no variance allowed in quantity and inspection and acceptance taking place at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes applied. The bracket must be palletized in accordance with DLA standards and shipped via traceable freight methods, explicitly excluding parcel post. Ozone-depleting chemicals are strictly prohibited in manufacturing or incorporation, and any substitute materials require prior approval unless already authorized by specification. The delivery is linked to a specific government shipment identifier, with a required delivery date of July 22, 2026, and the supply chain point of contact is Kristina Derry. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.

General Info

One LS1104696 bracket to Fort Benning by July 22, 2026, per DLA and MIL-STD specs, no parcel post, ozone-free.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

BLDG 9057 IVY RD, FORT BENNING, GA, 31905, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRACKET,VEHICULAR C
BRACKET,VEHICULAR C
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
GENERAL DYNAMICS LAND SYSTEMS INC. 01417 P/N LS1104696
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017559801 0001 EA 1.000
NSN/MATERIAL:2590016616799
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPE7L1-26-T-858F
SECTION B
PR: 7017559801 PRLI: 0001 CONT’D
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W33BQ9
W6YG USALRCTR FT BENNING
AWCF SSF
BLDG 9057 IVY RD
FORT BENNING GA 31905
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W33BQ9
W6YG USALRCTR FT BENNING
AWCF SSF
BLDG 9057 IVY RD
FORT BENNING GA 31905
US
MARKFOR
W33BQ9
W6YG USALRCTR FT BENNING
AWCF SSF
BLDG 9057 IVY RD
FORT BENNING GA 31905
US
M/F: (TCN) W33BQ961980334
RDD: N
PROJ: 03Z TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
SPE7L1-26-T-858F NSN/Part Number: 2590-01-661-6799 Quantity: 1 EA Purchase Request: 7017559801QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
TEST SET SUBASSEMBLThis contract pertains to the procurement of two units of a test set subassembly identified by NSN 4921-01-029-3054 and part number CA70251, under solicitation SPE7M0-26-T-014D. The delivery must occur within five days of order placement, with FOB origin terms and no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 specifications, utilizing approved methods and materials while avoiding plastics where possible, as required by DLA packaging standards. The item is to be delivered to a military facility in Derince, İzmit, Turkey, with freight handled by PTK00A at NUWC Newport, and must be palletized and marked in accordance with all referenced defense standards. The contract prohibits the use of Class I ozone-depleting chemicals and mandates adherence to all technical and quality requirements listed in the DLA Master List, which controls based on the solicitation issue date. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the supplier must ensure compliance with the DLA procurement framework including oversight of government identification removal on non-accepted supplies. The solicitation is issued by the Department of Defense through the Maritime Supply Chain ESOc Buys office, with a response deadline of August 3, 2026, and an original required delivery date of July 23, 2026. The item is classified under NAICS code 333310 and is subject to federal procurement rules. Special marking is not required, and the unit of issue is each. The point of contact is Audrey Acuna, and the full technical and quality specifications are incorporated by reference through DLA’s official master list. All deliveries are to be coordinated to the specified Turkish military address and governed by the DoD’s authorized unit of issue guidelines. The contract does not permit substitutions without prior approval, particularly for chemicals or packaging materials, and remains binding under all applicable defense acquisition regulations.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
COVER, ACCESS
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
MANDREL, DENTAL HANDPIE
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 12 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333310
New
DIBBS
TOOL AND EQUIPMENT KIT
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
TWISTLOCK, RETRACTAB
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR C
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
DIBBS
DENTAL KIT, EMERGENCY
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333310
New
DIBBS
METER, SPECIAL SCALE
MARITIME SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
Federal
4520--Heater Bundle Replacement in Boiler Plant One Time Repair
Network Contract Office 19 (36C259)

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
Federal
25--TWISTLOCK,RETRACTAB
DLA Land And Maritime

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
Federal
TELESCOPE,PANORAMIC
Navsup Weapon Systems Support Mech

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333310
New
Federal
25--BRACKET,VEHICULAR C
DLA Land And Maritime

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 335931
New
DIBBS
TERMINAL BOXThis contract issued by the Defense Logistics Agency specifies the procurement of a Terminal Box with NSN 5940016626042, under solicitation SPE7L1-26-T-859G, requiring one unit to be delivered within ten days FOB origin with no quantity variance permitted. The item is designated as a critical application item for Oshkosh Defense LLC, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with compliance controlled by the revision in effect on the solicitation issue date. The product must not contain any Class I ozone-depleting chemicals, and any substitutes must be pre-approved unless explicitly permitted by specification. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA’s packaging guidelines, and no special marking required. Delivery is directed to the Distribution Management Office at MCAS Kaneohe Bay, Hawaii, with transportation governed by DLA procedural notes C19 and C20. The contract includes detailed logistics identifiers including freight shipping and mark-for addresses, mission code M02211, and project code TP 2, with an original required delivery date of July 16, 2026. All units are specified in the DoD authorized unit of issue, and the contract’s financial terms reflect a unit price of $1.00 for a total value of $1.00. Government-specific codes and administrative identifiers are provided for internal processing, including IPD, DIC, and FC codes, and contract performance is supervised by Kristina Derry of the Department of Defense’s Land Supply Chain.
Current-Carrying Wiring Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTINGThe contract pertains to the procurement of a single mounting plate, identified by NSN 5340-01-508-3732 and part number 7139998, under solicitation SPE7L1-26-T-857W. The item is to be delivered in one unit within 20 days of contract award, with delivery terms set at FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, methods, and marking requirements without special markings. The item is not classified as hazardous, and palletization must adhere to DLA packaging standards. Delivery is directed to the Distribution Management Office at Camp Kinser, Japan, with transportation governed by DLA procedural notes C19 and C20. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications, with the applicable revision controlled by the solicitation issue date. The purchase request number is 7017559669, and the required delivery date is July 17, 2026. The contract is under the Department of Defense’s Land Supply Chain, with the primary point of contact being Michael Nordahl, and the solicitation response deadline is August 3, 2026.
Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThe contract is for the procurement of 36 helical compression springs, identified by NSN 5360-00-998-3455 and part number WA-2958, supplied by Breeze-Eastern LLC under the solicitation number SPE7L1-26-T-857A. The item is classified as a commercial item of a type and designated as critical application, requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 requirements. Delivery is set for five days after award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The goods must be shipped via traceable freight methods only, not parcel post, to the designated receiving point at Hill AFB, Utah, under RDD 777 and Project AWP TP 1. The original required delivery date is July 20, 2026, and the item is subject to government use codes and procurement controls. The unit of issue is each, priced at $36.00 per unit, with a total contract value of $1,296.
Spring Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKETThis contract pertains to the procurement of a gasket with part number 2208-F-370 and NSN 5330-01-161-9964, with a required quantity of three units. The item must strictly comply with federal standards prohibiting the use of asbestos as defined in FED-STD-313. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The gasket must be delivered within five days after award to Fort Hood, Texas, 76544. The solicitation number is SPE7L1-26-T-857D, posted on July 21, 2026, with responses due by August 3, 2026. The procurement is administered by the Department of Defense’s Land Supply Chain under NAICS code 339991, and all supplies must be free of government identification if not accepted. Primary point of contact is Kristina Derry, reachable via email or phone at the provided details.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326211
New
DIBBS
WHEEL ASSEMBLY, PNEUThe contract specifies the procurement of a single pneumatic wheel assembly with part number 2530-01-665-3350 under solicitation SPE7L1-26-T-858X, requiring delivery within 10 days to a military facility in Iwakuni, Japan, with FOB origin terms and no tolerance for quantity variance. The item is classified as a Type I shelf-life item with a strict 60-month non-extendable lifespan, requiring adherence to MIL-STD-129 for shelf-life markings and MIL-STD-2073-1E for packaging, with preservation conforming to MIL-DTL-4 standards for non-aircraft tires. All packaging and palletization must comply with DLA’s RP001 requirements, and government identification must be removed from non-accepted supplies. Sampling must follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless stated otherwise. The use of Class I ozone-depleting chemicals is expressly prohibited, and any substitutions require prior approval. Inspection and acceptance occur at the destination, and the item must be marked with the special shelf-life code 32. Technical and quality requirements are governed by the DLA Master List, with compliance mandatory, and units of issue follow DoD authorized standards. The contract was posted in July 2026 with a response deadline in August 2026, and the required delivery date is set for July 17, 2026.
Tire Manufacturing (except Retreading)

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
COVER, DIALThe contract pertains to the procurement of one unit of a COVER, DIAL with NSN 5355-00-953-5506 under solicitation SPE7L1-26-T-856Z, issued by the Department of Defense's Land Supply Chain. The item is classified under NAICS code 327999 and is subject to DLA Packaging Requirements for Procurement, incorporating all applicable technical and quality standards identified by R or I numbers as defined in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website. Compliance with these standards is mandatory, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The supplier must ensure the item does not contain Class I ozone-depleting substances, in alignment with DLA technical and standardization directives from a 1993 meeting. Delivery is required within five days after date of award to Hill AFB, Utah, zip 84056-5713. The primary point of contact is Kristina Derry, reachable via email and phone listed in the contract data, and responses must be submitted by August 3, 2026. No government identification is to be removed from non-accepted supplies as per regulatory protocol.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEALThis contract pertains to the procurement of 24 units of a specific item identified by NSN 5330-99-379-1132 and part number G413/4604/14, supplied by KNDS DEFENCE UK LIMITED under solicitation SPE7L1-26-T-859D. The item has been specifically excluded from the First Destination Packaging Program and is not eligible for standard commercial packaging, requiring instead compliance with MIL-DTL-117, Type II, Class C, Style 1, meaning it must be sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation. Packaging must follow MIL-STD-2073-1E with specific preservative methods, cushioning material, and unit container specifications, while marking must adhere to MIL-STD-129 with the special code “20 – Do Not Bend.” The item is subject to the DLA Master List of Technical and Quality Requirements, with any referenced R or I numbers governing its technical and quality standards. Delivery is required within five days of order placement, FOB origin, with no tolerance for quantity variance. The shipment must be sent by the fastest traceable means, excluding parcel post, to the designated DLA depot in Texarkana, Texas, with a required delivery date of July 20, 2026. The contract specifies that hazardous materials packaging standards apply and includes detailed government tracking information, including project code TP 1 and government use identifiers.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
RACK, STORAGE, SMALLThe contract is for the procurement of 16 units of a small storage rack system under solicitation SPE7L1-26-T-859J, a total small business set-aside with NAICS code 332994, issued by the Department of Defense’s Land Supply Chain. Each unit is priced at $16.00, with a total contract value of $256.00, and delivery is required FOB origin within 20 days of the order, with inspection and acceptance occurring at the destination. The item is identified by NSN 1095-01-710-8626 and must comply with precise packaging standards per MIL-STD-2073-1E, including specific materials for wrapping, cushioning, and containment, as well as marking in accordance with MIL-STD-129 and palletization as defined by DLA Packaging Requirements. Supply chain traceability documentation must be retained by the contractor per DLA Procurement Note C03, and government identification must be removed from non-accepted items. Two separate deliveries are scheduled, one for July 16, 2026, and another for July 20, 2026, both destined for Fort Carson, Colorado, with transportation logistics governed by DLA Procurement Notes C19 and C20. The contract includes strict quantity controls with zero variance tolerance, and the point of contact for inquiries is Zane Zwayer.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
DIBBS
O-RINGThis contract specifies the procurement of 240 O-rings with NSN 5331-01-734-8727 under solicitation number SPE7L1-26-T-860C, with a response deadline of August 3, 2026, and delivery required within 186 days of award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Packaging must comply with DLA standards, and all items must be free of asbestos and ozone-depleting chemicals, with any substitutions requiring prior approval unless explicitly authorized. Government identification must be removed from non-accepted supplies, and covered defense information provisions apply. Documentation for source approval requests must be submitted as required. The place of performance is New Cumberland, Pennsylvania, with Robert Warne of the Department of Defense’s Land Supply Chain as the primary point of contact, reachable via email and phone provided. The NAICS code is 333618, and this solicitation is issued by a federal agency under the Department of Defense.
Other Engine Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRANThis contract pertains to the procurement of one branched wiring harness with part number 4389581 and NSN 6150016585192, issued under solicitation SPE7L1-26-T-859A by the Department of Defense through the Land Supply Chain. Delivery is required within five days of contract award, with shipment originating from the supplier’s location and delivered FOB origin to the Marine Wing Support Squadron 373 in San Diego, CA. The item must comply strictly with DLA packaging standards defined in MIL-STD-2073-1E and MIL-STD-129 for marking, and must not be shipped via parcel post. The unit of issue is each (EA), with no quantity variance permitted. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must adhere to the revision in effect on the solicitation issue date. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions require prior approval unless explicitly authorized by the specification. Packaging and palletization must follow DLA’s procurement guidelines, with specified intermediate containers and preservation methods. The required delivery date is July 22, 2026, and the item is designated for government use only with associated military logistics codes. The point of contact for inquiries is Kristina Derry, and the solicitation response deadline is August 3, 2026.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract pertains to the procurement of a single gasket item identified by NSN 5330-01-681-2991 under solicitation SPE7L1-26-T-859H, with a required delivery within 20 days after award. The item is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. It must comply with MIL-STD-130N for identification marking and be packaged in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1 to protect against UV degradation, applicable to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. The gasket must be free of asbestos and any substitute materials must be formally approved under clause L30 and provision 4 conditions. Use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification but not exempting compliance with other product requirements. The item carries a non-extendable shelf life of 180 months per RS001 for TYPE I (CODE Y). Full and open competition applies, and the solicitation is managed by the Department of Defense’s Land Supply Chain with Kristina Derry as the primary point of contact, with responses due by August 3, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract pertains to the supply of two gaskets identified by NSN 5330-01-664-7095 under solicitation SPE7L1-26-T-859B, with a response deadline of August 3, 2026, and a required delivery within five days of award. All supplies must comply with the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on procurement scale. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1—using a medium duty, waterproof, greaseproof, opaque bag—to protect items from UV degradation, and this applies to direct vendor delivery, foreign military sales, and stock shipments. The gaskets must be free of asbestos, and any alternative materials require formal approval under Clause L30 and Provision 4 conditions. Mercury or mercury-containing compounds are strictly prohibited unless part of functional components like batteries, fluorescent lights, weapons systems, or specified reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment system per NAVSEA 5100-003D. All items must be marked in compliance with MIL-STD-130N for U.S. military property identification, and government identification must be removed from non-accepted supplies. The contract is managed by the Department of Defense’s Land Supply Chain, with performance occurring in West Bath, Maine, and primary point of contact being Kristina Derry.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details