Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BRACKET, VEHICULAR C

Active
SPE7L1-26-T-948YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one unit of BRACKET, VEHICULAR C with NSN 2590-01-680-6104, issued under solicitation SPE7L1-26-T-948Y with a response deadline of August 21, 2026, and a required delivery within 20 days after order. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must conform to DLA standards, and non-accepted supplies must have all government identification removed prior to return. The item involves technical data subject to export control under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce; this restriction extends to foreign nationals within the U.S. and foreign subsidiaries of U.S. companies, with DFARS 252.225-7048 governing compliance. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and approved DLA questionnaire responses. The procurement is open to full competition under NAICS code 333310, with performance required at Fort Riley, Kansas, 66442-0000, and primary point of contact is Kristina Derry via email and phone provided.

General Info

Procurement of one vehicular bracket under export-controlled NSN, delivery in 20 days, Fort Riley, Kansas, full competition.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

BLDG 8410 EDWARDS ROAD, FT RILEY, KS, 66442-0000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-948Y for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRACKET,VEHICULAR C
BRACKET,VEHICULAR C
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2590-01-680-6104 Quantity: 1 EA Purchase Request: 7017763410QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
MANIFOLD ASSEMBLY, H
Solicitation # SPE7L3-26-T-170V
The contract pertains to the procurement of one Manifold Assembly, H, identified by NSN 2590-01-680-2969 and part number PX92992A from Twin Disc, Incorporated, with a requirement for delivery within 20 days of contract award. The item is classified as a commercial item and must comply with all applicable DLA technical and quality requirements referenced in the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking requirements in accordance with MIL-STD-129. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be approved unless explicitly authorized by the specification. Delivery is FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at destination. Packaging must adhere to DLA packaging requirements, with specific instructions for intermediate containers, wrapping materials, and palletization. Parcels must not be shipped via parcel post; instead, the fastest traceable means must be used, with freight directed to the Imperial Beach, California delivery point and a separate parcel post address listed for government use. The contract is issued under solicitation SPE7L3-26-T-170V with a required delivery date of August 10, 2026, and includes government-specific identifiers for tracking and logistics.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
Federal
VIDEO MOUNT
Solicitation # SPMYM226Q7946
To be considered for award of the VIDEO MOUNT solicitation SPMYM226Q7946, bidders must submit a fully completed and signed solicitation via email to donna.todd@dla.mil by the deadline of August 11, 2026, at 7:00 PM ET. The solicitation is restricted to SBA-certified Women-Owned Small Businesses under the WOSB Program and falls under NAICS code 333310. Bidders must ensure compliance with Clause 52.204-24 by checking applicable boxes in subsections (2)(d)(1) and (2), and must complete all required items including Contractor information, POC details, quote submission, FOB Destination terms, lead time or delivery date, manufacturer identification in Section K, and signatures in boxes 30a, 30b, and 30c. Commercial Off The Shelf items are exempt from NIST SP 800-171 requirements, but must be clearly identified with supporting details submitted during bidding. Contractors not exempt from NIST 800-171 must have a current assessment on file, not older than three years, unless otherwise specified. All documentation must be submitted electronically through SAM.gov or via email, and failure to meet any of these requirements will render the bid non-responsive. The place of performance is in Bremerton, Washington, and all responses must be directed to the designated point of contact, Donna Todd.
DLA Maritime - Puget Sound

POSTED

about 7 hours ago

DEADLINE

in about 24 hours
View Details
NAICS: 333310
New
DIBBS
TANK, OIL, HYDRAULIC
Solicitation # SPE7L3-26-T-169H
The contract is for the procurement of two hydraulic oil tanks with NSN 2590-01-699-6915, issued under solicitation SPE7L3-26-T-169H by the Department of Defense through DLA Land and Maritime. Delivery is required within 83 days of award, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. The quantity is fixed at two units with no tolerance for variance, and the unit price is specified at $2.00 per unit totaling $4.00. Packaging must comply with ASTM D3951 and be clearly marked and labeled per MIL-STD-129, with palletization adhering to DLA’s RP001 packaging requirements. All technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements take precedence over any other specification. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes must be pre-approved unless explicitly authorized by the specification. The shipment must be delivered to the designated DLA distribution center at 25600 S Chrisman Rd, Tracy, CA 95304-5000, with a need ship date of March 3, 2026, and an original required delivery date of March 14, 2026. Transportation details follow DLAD Proc Notes C19 and C20, and the supplier is Taylor Defense Products, LLC with vendor code 7Y1R3.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
KEYBOARD, DATA ENTRY
Solicitation # SPE8EN-26-T-2880
This contract solicitation, identified as SPE8EN-26-T-2880, seeks the procurement of two data entry keyboards under NSN 7025013686602 for delivery to the Yokosuka Repair and Supply Facility in Japan. The item must be delivered FOB origin within 20 days of order placement with no variance allowed in quantity, and inspection and acceptance occur at the contractor’s facility prior to shipment. The keyboards must comply with stringent military packaging standards including MIL-STD-2073-1E and MIL-E-17555, with packaging level B and preservation method code ZZ triggering Level A preservation. Marking must adhere to MIL-STD-129, including standardized barcoding and no special marking requirements. A strict prohibition against intentional addition of mercury or mercury compounds applies, except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Cybersecurity requirements include CMMC Level 2 self-assessment and compliance with FAR 52.240-93 and DFARS 252.204-7012 for safeguarding covered defense information, alongside NIST SP 800-171 assessment mandates. The contract incorporates numerous FAR and DFARS clauses covering unauthorized obligations, accelerated payments to small businesses, inspection of supplies, default, subcontracting, whistleblower rights, information disclosure, export controls, prohibition of toxic substances like hexavalent chromium, and electronic payment via WAWF. Offerors must represent their small business status, UEI, and CAGE code, and disclose any involvement with covered defense telecommunications equipment or services. The solicitation is issued under simplified acquisition procedures, with proposals required to be submitted electronically through the DLA Internet Bid Board System by the August 20, 2026 deadline. Payment is processed using Wide Area WorkFlow, and contractors must ensure compliance with all applicable environmental, cybersecurity, packaging, and reporting standards without exception.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
SIGHT, REFLEX
Solicitation # SPE7M0-26-T-034K
The contract pertains to the procurement of one unit of a sight reflex item identified by NSN 1240-64-001-0199 and part number 405044023, supplied by SAAB DYNAMICS AKTIEBOLAG A175N. The requirement is governed by DLA packaging standards under RP001 and incorporates technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Delivery is required within five days of award, shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containment as detailed in the packaging data. Marking must adhere to MIL-STD-129 with the special fragile designation, and palletization must meet DLA packaging guidelines. The item is to be delivered to Fort Wainwright, Alaska, with shipment governed by DLAD procedures C19 and C20, and freight and marking instructions are directed to the specified government supply point. The contract number is SPE7M0-26-T-034K, with a required delivery date of August 6, 2026, and the solicitation response deadline is August 20, 2026. The acquiring agency is the Department of Defense through the Maritime Supply Chain ESOC Buys, with Gerard Quinn as the primary point of contact.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
DECK UNIT, BRIDGING
Solicitation # SPE8ED-26-T-1254
The contract is for the procurement of two Deck Units, Bridging, identified by NSN 5420-12-357-7675, under solicitation SPE8ED-26-T-1254, with a response deadline of August 20, 2026, and a required delivery within 164 days after award. The item falls under NAICS code 333310 and is managed by the Department of Defense’s Construction & Equipment Containers office, with performance designated for Tracy, CA, 95304-5000. This procurement is subject to stringent cybersecurity and compliance requirements including CMMC Level 2 certification for the third-party assessment organization, adherence to DLA packaging standards, and mandatory removal of government identification from non-accepted supplies. Technical data associated with the item is controlled under ITAR or EAR export regulations, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to DLA contractors who hold valid US/Canada JCP certification, have completed mandatory export control training and questionnaire, and have received explicit DLA approval. The point of contact for this solicitation is Ogden Howard, reachable via email and phone provided, and details can be reviewed on the DIBBS platform.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
CAMERA SUBASSEMBLY
Solicitation # SPE8EN-26-T-2867
The Defense Logistics Agency is procuring 14 camera subassemblies with NSN 6720-01-663-0095 to support legacy systems requiring obsolete WATEC cameras originally acquired by NAVAIR as an end-of-life purchase. These cameras are not assigned an NSN and will not be managed by DLA, necessitating direct transfer from NAVAIR to fulfill contractor obligations for two DLA NIINs and three NAVSUP WSS NIINs within the ALRE ILARTS system. The solicitation, issued under SPE8EN-26-T-2867, requires compliance with DLA’s Master List of Technical and Quality Requirements and mandates adherence to strict packaging, documentation, and export control protocols, including DFARS 252.225-7048. Technical data associated with the item is subject to ITAR or EAR restrictions, limiting access to contractors with approved US/Canada Joint Certification Program status, completed training, and DLA authorization. Proprietary or insufficient data precludes competitive procurement, and all supplies must comply with DLA requirements for removing government identification from non-accepted items. The delivery schedule demands fulfillment within 164 days of award, with performance located in Tracy, California, and primary point of contact Jennifer Esworthy at DLA.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
CAP, LENS
Solicitation # SPE4A7-26-T-633C
The contract pertains to the procurement of 49 units of a commercial off the shelf item identified by NSN 5855-01-609-5741, specifically a CAP, LENS, with no shelf life requirement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation number is SPE4A7-26-T-633C, issued on August 9, 2026, with responses due by August 17, 2026. Delivery is required within 10 days of award. The procurement is under the Department of Defense, managed by the ASC Supplier Oper AE and AF Division, with Michael Johnson as the primary point of contact. The NAICS code is 333310, indicating the item falls under manufacturing of other commercial and service industry machinery. The purchase request number is 7017720092 with a requested quantity of 99 units.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 333310
New
Federal
Commercial Dryer SupplyThe contract seeks the supply of commercial-grade dryers equivalent to the Speed Queen DV2000WE model, featuring galvanized steel drums, heavy-duty motors, and an energy-efficient design tailored for high-volume operational use at a Veterans Affairs medical center in Baltimore, Maryland. These dryers must meet stringent durability and performance standards to support continuous use in a healthcare setting, ensuring reliability, safety, and longevity under demanding conditions. The equipment is intended for institutional laundry operations where efficiency and reduced energy consumption are critical to maintaining operational sustainability. The solicitation is designated as a subcontract under NAICS code 333310, reflecting its classification within the household and institutional laundry equipment manufacturing sector. The contract was posted on August 7, 2026, with a response deadline of August 14, 2026, at 5:00 PM, and is managed by the 245-NETWORK Contract Office 5 under the Department of Veterans Affairs. Performance will be delivered to the facility located in Baltimore with zip code 21201, and all submissions must comply with the technical and logistical requirements specified by the agency to ensure seamless integration into existing laundry infrastructure.
245-NETWORK Contract Office 5 (36C245)

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 333310
New
Federal
Space-Ruggedized C-Mount Lens Supply with Fixed Aperture and Filter IntegrationNASA is soliciting a subcontract for the supply of 40 specially modified 16-mm JADE-series C-mount lenses designed for operation in space environments. Each lens features a fixed f/4.0 aperture, filter staking secured with low-outgassing adhesive to prevent contamination in vacuum conditions, and internal ruggedization using materials certified by NASA for thermal stability, vibration resistance, and long-term reliability in orbital missions. The lenses must meet stringent spaceflight standards with no compromise on optical performance or mechanical integrity under extreme conditions. The contract is targeted for delivery to Hampton, Virginia, with a response deadline of August 11, 2026, and is classified under NAICS code 333310 for optical instrument and lens manufacturing. The procurement is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. All components and assembly processes must comply with NASA’s material outgassing and contamination control protocols, ensuring compatibility with spacecraft systems and mission success. Subcontractors must demonstrate expertise in space-qualified optical systems and provide full traceability of materials and manufacturing methods.
NASA Shared Services Center

POSTED

3 days ago

DEADLINE

in about 17 hours
View Details
NAICS: 333310
New
Federal
AMRT HD Marine Observation Camera
Solicitation # W911YN26QA016
The U.S. Army’s W7M2 USPFO Activity FL ARNG is soliciting a commercial off-the-shelf HD marine observation camera to replace a critical infrared component used by the AMRT for reconnaissance and observation missions. The required system must feature an 8-megapixel CMOS sensor, a 30-power optical zoom HD lens with an optical field of view ranging from 75 to 1.18 degrees, two-axis gyro stabilization, integrated MWIR cooled thermal imaging with a 35KM detection range, a 12KM laser range finder, GPS, and NMEA 0183 protocol-compatible command and control software—all housed in a rugged IP67-rated enclosure. This solicitation, numbered W911YN26QA016, is a total small business set-aside under NAICS code 333310, with proposals due by 10:00 AM EDT on August 13, 2026, following an amended deadline. Award will be made on a lowest price technically acceptable (LPTA) basis, with technical acceptability determined solely by conformity to the specified product description and price being the sole determining factor for selection. All deliverables must be marked with U.S. military-compliant two-dimensional Data Matrix symbols per MIL-STD-130, using ISO/IEC 16022 ECC200 symbology, and shipped with labeling in accordance with MIL-STD-129. Delivery is required by September 30, 2026, to the designated facility in Saint Augustine, Florida, with FOB Destination terms applying unless otherwise specified. Contractors must submit invoices and receiving reports exclusively through the Wide Area WorkFlow system and comply with stringent supply chain restrictions, including prohibitions on equipment sourced from the Xinjiang Uyghur Autonomous Region or the Maduro regime, as well as prohibitions on covered defense telecommunications equipment. Compliance with FAR and DFARS clauses addressing trafficking in persons, DEI discrimination, sustainable products, pollution prevention, Buy American requirements, export controls, and whistleblower protections is mandatory. The contract also requires IUID registration for all delivered items, including embedded components, and mandates flow-down of applicable clauses to subcontractors. The contracting officer is Douglas D. Divine, and all technical and administrative communications must be directed through official Army email channels.
W7M2 Uspfo Activity Fl Arng

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 333310
New
Federal
40x 16-mm JADE-series space-ruggedized lenses from Schneider Optics, Inc.
Solicitation # 80NSSC26941378Q
This contract is a sole source requirement for 40 units of 16-mm JADE-series space-ruggedized lenses to be supplied by Schneider Optics, Inc., specifically engineered for use in space environments where durability and optical precision under extreme conditions are critical. The solicitation, identified by number 80NSSC26941378Q, was posted on August 7, 2026, with a response deadline of August 11, 2026, indicating a narrow window for submission. The procurement falls under NAICS code 333310, which classifies it within the optical instrument and lens manufacturing sector, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. Performance of the contract will take place in Hampton, Virginia, while the agency office responsible is located at Stennis Space Center in Mississippi. The sole point of contact for inquiries is Shanna Patterson, whose email is provided for direct communication. No set-aside provisions apply to this solicitation, underscoring its exclusive nature and the critical need for the specified lenses from a single qualified supplier.
NASA Shared Services Center

POSTED

3 days ago

DEADLINE

in about 18 hours
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332999
New
DIBBS
AIR SPRING, VEHICULA
Solicitation # SPE7L1-26-T-948X
The contract specifies the procurement of one air spring for vehicle use with NSN 2510-01-732-1241 and part number 1R12-607 manufactured by Goodyear Tire & Rubber Company, under solicitation SPE7L1-26-T-948X. Delivery is required within 20 days from the contract award, FOB origin, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. All supplies must comply with DLA's Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951, and packaging must follow MIL-STD-129 and RP001 DLA Packaging Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specification. Packaging shall be palletized per DLA guidelines and labeled appropriately with the correct Unit of Issue and Quantity per Unit Pack. The shipment is to be delivered via the fastest traceable freight method, not parcel post, to the specified Navy Expeditionary Logistics Support Group address in Williamsburg, VA, with an original required delivery date of August 7, 2026. Government use codes and shipping identifiers are provided for internal tracking and logistics coordination.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-Q-1477
The contract pertains to the procurement of three straight shafts identified by NSN 3040-01-658-3106 under solicitation SPE7L1-26-Q-1477, with a delivery requirement of 173 days after award. The solicitation is open for full and open competition and is managed by the Department of Defense’s Land Supply Chain under the Defense Logistics Agency. The item is subject to rigorous quality and cybersecurity requirements, including mandatory CMMC Level 2 certification for any third-party assessors involved, and adherence to DLA’s technical and quality standards referenced through R and I numbers from the DLA Master List. The contract enforces strict configuration change management, quality conformance inspections, and inspection and acceptance at origin, with all suppliers required to comply with DLA packaging standards and the removal of government identification from non-accepted items. Technical data associated with the item is export-controlled under ITAR or EAR, necessitating compliance with DFARS 252.225-7048 and restricting access to contractors approved under the US/Canada Joint Certification Program who have completed required DLA export control training and questionnaires. Covered defense information protocols apply, and all measuring and test equipment must meet specified standards. The point of contact is Mary Miller, with responses due by August 21, 2026, and performance to occur at Anniston, Alabama, with a posted date of August 10, 2026.
Machine Shops

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333120
New
DIBBS
TRACK SHOE ASSEMBLY
Solicitation # SPE7L1-26-T-947X
The contract is for the procurement of two Track Shoe Assemblies, identified by NSN 2530-01-314-6415 and part numbers 3P1027 from CATERPILLAR INC and 53778 from INTERTRACTOR AMERICA CORP, with a total quantity of two units. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using wooden crates of overseas type capable of handling over 3200 lbs, constructed to MIL-C-104 or ASTM D6039 standards. Corrosion protection, grease-proof wrapping, and moisture control measures are mandatory for all containers. The items are designated as critical application components and must be marked with the center of balance code 14. All packaging, marking, and shipping must adhere to DLA procurement requirements and the DLA Master List of Technical and Quality Requirements referenced in the document. Shipment must be sent via traceable means, excluding parcel post, to the designated military facility in Little Falls, MN. The freight and marking addresses are identical, and the shipment is classified as RDD with no NMCS designation. The contract is issued under solicitation SPE7L1-26-T-947X, with a required delivery date of August 7, 2026, and is managed by the Department of Defense’s Land Supply Chain. The primary point of contact is Kristina Derry, and the National Industrial Security Program Code is 333120. The contract is subject to DoD unit of issue standards and federal procurement protocols, with all documentation and compliance requirements binding on the supplier.
Construction Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
CAP, PROTECTIVE, DUST AN
Solicitation # SPE7L1-26-T-948Q
The item is a protective cap designed to seal against dust and moisture, identified by NSN 5340-01-621-3762, with a total procurement quantity of 2,739 units under purchase request 7017775079. The contract solicitation, numbered SPE7L1-26-T-948Q, was posted on August 10, 2026, with responses due by August 21, 2026, and delivery is required within 197 days after award. The product falls under NAICS code 335931 and is being procured by the Department of Defense through the Land Supply Chain, with performance occurring at Cherry Point, North Carolina, 28533-5040. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and specific regulations apply including packaging Standards, removal of government identification from non-accepted supplies, and export control of technical data. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce. All contractors must be certified under the US/Canada Joint Certification Program, have completed approved DOD training on handling export-controlled technical data, and have received explicit approval from DLA to access such data. DFARS 252.225-7048 applies to all technical data handling, and distribution is strictly limited to approved U.S.-based contractors. The primary point of contact for the solicitation is Isabelle Szulewska, reachable via email and phone provided, and all relevant documents and training materials are accessible through the DLA eProcurement website.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC ST
Solicitation # SPE7L1-26-T-949M
The contract specifies the procurement of four nonmetallic strip seals identified by NSN 5330-01-649-5588 under solicitation SPE7L1-26-T-949M, with a required delivery within five days after order. The item is classified as a commercial item and must be free of asbestos, with any alternative materials requiring approval per Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item is subject to MIL-STD-130N for identification marking of U.S. military property and covered defense information protocols. The place of performance is Anniston, Alabama, with Kristina Derry as the primary point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L1-26-Q-1483
The contract pertains to the procurement of 14 units of an item identified by NSN 0001S00000053 under solicitation SPE7L1-26-Q-1483, with a delivery deadline of 153 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on acquisition size. The item is classified as a small arms weapon or part, subject to demilitarization requirements under Category I of the Munitions List. Cybersecurity Compliance is mandatory at CMMC Level 2, assessed by a certified third-party organization. The contractor must adhere to DLA packaging standards and tailored higher-level quality requirements, including configuration change management, inspection and acceptance at origin, and removal of government identification from non-accepted items. Physical identification of the bare item must conform to specified marking protocols. All technical data associated with the item is subject to export control under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, whether in the U.S. or abroad, and is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA-approved access. The place of performance is San Diego, CA, with Deborah Ferrin as the primary point of contact, and responses are due by August 20, 2026.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
STOP, TRACK
Solicitation # SPE7L1-26-T-947Y
This contract under solicitation SPE7L1-26-T-947Y requires the delivery of eight units of item NSN 5340-01-698-0256, identified as SIKORSKY AIRCRAFT CORPORATION P/N 78204-02557-108, at a unit price of $8.00 for a total value of $64.00. Delivery is due within 20 days of contract award with FOB origin terms and zero variance allowed in quantity. All items must comply strictly with DLA’s Master List of Technical and Quality Requirements, which override any conflicting specifications, and must be marked in accordance with MIL-STD-130N for military property identification. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging standards, with hazardous materials regulated by TQ requirement IP025 per FED-STD-313 and non-hazardous items conforming to ASTM D3951, unless superseded by DLA requirements. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute chemicals require prior approval unless already authorized by specification. Shipment must be made via the fastest traceable freight method and not parcel post, addressed to Davis Monthan AFB, Arizona, with the RDD code 777 and designated freight contact information. The required delivery date is August 6, 2026, and the items are subject to inspection and acceptance at destination.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
LEVER AND SHAFT, BOM
Solicitation # SPE7L1-26-Q-1476
The item being procured is a lever and shaft component identified as a critical gun part with unique and stringent requirements, classified as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act. Any manufacturer or exporter must be registered with the Directorate of Defense Trade Controls, and failure to provide proof of registration upon request will render an offer ineligible. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The solicitation mandates two exhibits: one fully assembled and coated unit and one machined but unassembled and uncoated unit. Government Furnished Artillery Testing applies, and offerors may be contacted post-quote to address pricing for this requirement. The NSN is 1095-00-233-2047 with a quantity of four units required, and delivery is due within 281 days after delivery order. The contract is managed by the Department of Defense through the Land Supply Chain, with the place of performance designated as Hill AFB, Utah. The solicitation number is SPE7L1-26-Q-1476, issued on August 10, 2026, with responses due by August 20, 2026, and the primary point of contact is Zane Zwayer, reachable via email and phone provided.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
BREATHER
Solicitation # SPE7L1-26-T-949F
This contract, under solicitation number SPE7L1-26-T-949F, is for the procurement of one unit of a critical application item, ZF FRIEDRICHSHAFEN AG P/N 0501 218 540, identified by NSN 2520-14-574-0622. Delivery is required within 20 days of award, with FOB origin terms and inspection and acceptance occurring at the destination, the Navy Expeditionary Logistics Support Group in Williamsburg, Virginia. Packaging must adhere strictly to DLA Master List requirements, superseding ASTM D3951, and must comply with MIL-STD-129 for marking and labeling. If the item is hazardous per FED-STD-313, it must be packaged under TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, though subject to higher-priority DLA standards. Palletization must follow RP001, and all packaging must reflect the specified Unit of Issue and Quantity per Unit Pack. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Item Unique Identification is waived per customer request, and the unit of issue is each. Shipment must be sent via the fastest traceable means and is expressly prohibited from using parcel post. The required delivery date is August 7, 2026, with no variance allowed in quantity. Government use codes and shipping identifiers are provided for internal logistics tracking and accountability.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7L1-26-T-947T
The contract is for two nonmetallic seals identified by NSN 5330-01-692-9075 under solicitation SPE7L1-26-T-947T, with a required delivery within 20 days of award. The item is classified as a commercial item and must be free of asbestos, with any alternative materials requiring approval under Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item must also be marked in accordance with MIL-STD-130N for U.S. military property identification, and government identification must be removed from non-accepted supplies. Covered defense information potentially applies, and packaging and handling must adhere to DLA packaging standards. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026, and performance is due at Davis Monthan AFB, Arizona, under the Department of Defense’s Land Supply Chain.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-948A
The contract pertains to the procurement of three mounting brackets identified by NSN 5340-01-714-5611 under solicitation SPE7L1-26-T-948A, with a required delivery within five days of award. The item is governed by strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and the cited source-controlled drawing must be fully complied with; only approved sources listed on the drawing are initially recognized, though additional qualified sources may exist. Offerors seeking future qualification must contact the cognizant design activity specified on the drawing. Cybersecurity compliance is mandated at CMMC Level 2 for third-party assessors, and the contract enforces prohibitions on ozone-depleting chemicals, requiring approval for any substitute chemicals. Export control provisions under ITAR or EAR apply to associated technical data, with access restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and questionnaire, and have received explicit approval from DLA. All technical data handling must adhere to DFARS 252.225-7048, including restrictions on disclosure to foreign persons regardless of location. Government identification must be removed from non-accepted supplies, and configuration changes require formal engineering change proposals or variance requests. The solicitation issued on August 10, 2026, with responses due by August 21, 2026, is managed by the Department of Defense’s Land Supply Chain through the DLA, with performance location in Suffolk, Virginia, and primary point of contact provided.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-T-947Z
The contract is for the procurement of two straight shafts with NSN/part number 3040-01-485-8075, under solicitation number SPE7L1-26-T-947Z, issued by the Department of Defense’s Land Supply Chain. Delivery is required within five days after contract award, and responses must be submitted by August 21, 2026. The solicitation is a full and open competition with no set-aside classification and falls under NAICS code 333613. Contractors must comply with stringent technical and quality requirements as referenced in the DLA Master List of Technical and Quality Requirements, and must adhere to all applicable DLA packaging, configuration change management, and export control regulations. The item involves technical data subject to ITAR or EAR export controls, restricting access to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and have received explicit authorization from the DLA. Ozone-depleting chemicals are strictly prohibited in any component or process, and substitutions require prior approval. Additionally, all covered defense information must be handled in accordance with applicable cybersecurity protocols, and contractors must be CMMC Level 2 certified third-party assessment organizations. The point of contact for inquiries is Kristina Derry, with delivery performance required in Suffolk, Virginia, 23435-5000.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details