Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Branched Wiring Harness Manufacturing

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and delivery of one military-grade branched wiring harness unit under CLIN 0001, with strict adherence to defense standards for performance, reliability, and safety. The contractor must ensure full compliance with all packaging, labeling, and marking specifications required for government inspection and acceptance, with no deviations permitted. The product is intended for use in defense applications and must meet the highest levels of quality control and documentation to support operational readiness and traceability. The solicitation, issued by the Department of Defense under the LAND SUPPLY CHAIN agency, has a place of performance in San Diego, California, with a zip code of 92145-2049. The contract falls under NAICS code 334390, indicating it is related to other communications equipment manufacturing. As a subcontract opportunity, it is open to qualified vendors capable of fulfilling military-grade specifications, with responses due by August 3, 2026. The project is part of a broader logistics and supply chain initiative within the U.S. military infrastructure and requires full compliance with federal procurement regulations and delivery timelines.

General Info

Manufacture and deliver one military-grade wiring harness to DoD standards in San Diego by August 3, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

334390View NAICS

Place of Performance

SAN DIEGO, CA, 92145-2049, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 21

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of one military-grade branched wiring harness unit per CLIN 0001, including compliant packaging, marking, and delivery for government inspection.

Similar Contracts

Same NAICS industry code

Special-Purpose Electrical Cable Assembly ManufacturingA single unit of a special-purpose electrical cable assembly identified by NSN 6150-01-586-8572 is being manufactured under a subcontract requiring full compliance with military specifications for design, engineering, and production. The work involves creating a highly specialized cable assembly tailored for defense applications, with all deliverables expected to meet stringent performance, durability, and safety standards. The finalized product must be prepared for FOB origin delivery to the designated location in Yermo, California, zip code 92398-5048, ensuring all logistics and packaging requirements are fulfilled prior to shipment. The solicitation was posted on July 27, 2026, with a tight response deadline of July 30, 2026, indicating a rapid turnaround expectation for potential subcontractors. The contract falls under NAICS code 334390, which pertains to other electrical equipment and component manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. While no set-aside designation or point of contact is provided, the urgency and specificity of the requirement imply a critical operational need, and only eligible contractors with proven capabilities in military-grade electrical systems should respond. All submissions must demonstrate full alignment with the technical and compliance requirements of the NSN specification.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

Toggle Switch Supply (Commercial Off-The-Shelf Component)The contract involves the supply of 30 military-spec toggle switches identified by NSN 5930012260457, sourced as commercial off-the-shelf components to meet Department of Defense logistical, safety, and environmental requirements. The work is classified as a subcontract under NAICS code 334390 and is managed by the Electrical Devices Division within the Department of Defense, with performance required at Robins Air Force Base, Georgia, zip code 31098-1887. All units must adhere strictly to military specifications and be fully compliant with existing DoD standards for use in defense applications. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, providing a 12-day window for interested parties to submit proposals. While no set-aside designation or point of contact details are provided, the contract is accessible through the DIBBS system via the specified UI link. The absence of a solicitation number suggests this may be an internal or simplified procurement, but compliance with DoD logistics protocols remains mandatory to ensure readiness and interoperability within defense systems.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Push Switch Supply (NSN 5930011520625)The contract calls for the supply and delivery of two commercial push switches identified by National Stock Number 5930011520625, requiring full compliance with military packaging, labeling, and hazardous materials disclosure standards. All items must be delivered to the designated place of performance in Cherry Point, North Carolina, with the zip code 28533-5040. The solicitation is classified as a subcontract under NAICS code 334390 and is managed by the Electrical Devices Division within the Department of Defense. The opportunity was posted on July 23, 2026, with a firm response deadline of August 3, 2026. Interested parties must adhere strictly to the military-specific regulations for handling and documentation to ensure contractual compliance.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Cable Assembly Supply and DeliveryThe contract entails the supply and delivery of 34 units of a military-spec cable assembly identified by NSN 4240009280872, requiring full compliance with all applicable packaging, labeling, and hazardous materials regulations. The equipment must meet stringent military standards and be delivered to the specified performance location in New Cumberland, Pennsylvania, with ZIP code 17070-5002. The solicitation is classified as a subcontract under NAICS code 334390 and is managed by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. The posting date is July 22, 2026, with responses due by August 3, 2026, and the opportunity is accessible through the DIBBS platform under reference number SPE8E626T3785. All potential vendors must ensure adherence to regulatory and technical specifications without exception.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Electrical Harness Supply and AssemblyThe contract pertains to the supply and assembly of electrical harnesses identified by NSN 5999016258020, requiring full compliance with Department of Defense technical standards including MIL-STD-129 for packaging and labeling and QUP 001 for quality assurance. All delivered items must be properly packaged, individually barcoded, and certified to meet stringent military specifications for functionality, durability, and traceability. The work is classified as a subcontract under NAICS code 334390, indicating specialized electronic component manufacturing, and is administered by the Maritime Supply Chain under the Department of Defense. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and performance will be executed in accordance with DLA requirements without designated geographic constraints.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Cable Assembly Manufacturing – Power Electrical CablesThe contract calls for the manufacture and delivery of 24 military-spec power cable assemblies identified by NSN 5995010440347, with strict adherence to all applicable packaging, labeling, and hazardous materials regulations. The work is scoped under a subcontract with a NAICS code of 334390, indicating classification within other electronic component manufacturing. The place of performance is specified as Albany, Georgia, with the delivering entity being the ASC Commodities Division under the Department of Defense. All deliverables must meet military specifications and be fully compliant with federal handling and transportation standards for hazardous materials. Proposals must be submitted by July 29, 2026, and are being sought through a solicitation portal operated by the Defense Logistics Agency. No set-aside preferences are designated, and the contract is open to eligible subcontractors capable of meeting the technical and regulatory requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Cable Assembly ManufacturingThe contract encompasses the manufacture of custom cable assemblies compliant with military specifications, covering all aspects of production including wiring, connector attachment, shielding, and labeling, under the National Stock Number 7540-01-152-8070. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the North American Industry Classification System code 334390 indicating it falls within other electronic component manufacturing. The work is intended to support military needs and must adhere strictly to technical and quality standards required for defense applications. The contract was posted on July 21, 2026, and is identified by the award number SPE4A626P9951. There is no set-aside designation, and no specific place of performance or point of contact is provided. Completion of this subcontract requires precision engineering and compliance with military-grade durability and reliability benchmarks, with all deliverables expected to meet the stringent demands of defense operations. The full details and award information are accessible via the DIBBS portal link associated with the contract.

Defense Logistics Agency

POSTED

DEADLINE

Push Switch Supply (Electromechanical Components)The contract requires the supply of three units of a push switch, an electromechanical component, under CLIN 0001, with full compliance to military packaging, preservation, and marking standards to ensure durability and traceability in defense applications. The item is intended for use within the Department of Defense’s Electrical Devices Division, with performance obligations tied to the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation, issued as a subcontract under NAICS code 334390, was posted on July 21, 2026, and responses must be submitted no later than August 3, 2026, with the opportunity accessible through the DIBBS platform. All deliverables must adhere strictly to military specifications, emphasizing quality control and standardized documentation to meet deployment readiness requirements.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of Push Switches (NSN: 5930010866027)The contract specifies the supply and delivery of 41 military-specification push switches identified by NSN 5930010866027, requiring full compliance with all applicable military standards for performance, durability, and environmental resilience. Each unit must be accompanied by compliant packaging and labeling that meets defense logistics requirements, along with complete documentation including test reports, certificates of conformance, and traceability records necessary for procurement and field deployment. The items are to be delivered to New Cumberland, Pennsylvania, 17070-5002, serving as the designated place of performance. This subcontract, issued under the NAICS code 334390 for other electrical equipment and component manufacturing, is managed by the Electrical Devices Division within the Department of Defense, with a response deadline of August 3, 2026. The solicitation is open for competitive bidding and reflects a direct need for critical components used in defense systems, where reliability and adherence to exacting specifications are non-negotiable. All submissions must be submitted via the specified DIBBS platform, and failure to meet technical, packaging, or documentation requirements will result in disqualification regardless of pricing competitiveness.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Precision Cable Assembly ManufacturingThe contract entails the manufacture and delivery of 104 military-grade cable assemblies identified by NSN 4920014742995, adhering to federal logistics requirements and implied MIL-STD specifications to ensure operational reliability and interoperability in defense systems. The supplier is expected to meet rigorous quality and performance standards typical of defense procurement, with all units destined for delivery to Boeing’s facility in Mesa, Arizona. This subcontract falls under NAICS code 334390, indicating it involves other communications equipment manufacturing, and is managed under the broader authority of the Defense Logistics Agency within the Department of Defense. Although the solicitation number and specific point of contact are not provided, the contract is publicly accessible through DIBBS with a posted date of July 21, 2026, and is governed by standard DoD contractual obligations surrounding production timelines, inspection protocols, and compliance with defense supply chain protocols.

Defense Logistics Agency

POSTED

DEADLINE

Wiring Harness Manufacturing and AssemblyThe contract calls for the full-scale production of 19,000 wiring harness units according to TDP Rev B Gen 2 specifications, encompassing all aspects of manufacturing from component sourcing to final assembly, including crimping, termination, and shielding processes. This is a subcontract under a Total Small Business Set-Aside as defined by the SBA, with the NAICS code 334390 indicating the scope falls under other electronic component manufacturing. Performance is required at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The opportunity was posted on July 21, 2026, and responses are due by July 29, 2026, with the solicitation managed by the ASC Commodities Division within the Department of Defense. The full details and submission requirements can be accessed through the DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

RS232 Cable Manufacturing and AssemblyThe contract requires the manufacture and delivery of five specialized RS232 cables with the national stock number 5810-01-391-4212, engineered to meet rigorous military-grade standards for durability and signal integrity, ensuring reliable performance in Department of Defense communications systems. The cables must be assembled and tested to withstand extreme environmental conditions and maintain consistent data transmission under operational stress, adhering to specifications that align with defense-grade requirements. Submission of proposals is open until July 29, 2026, with the solicitation posted on July 21, 2026, under a subcontract type and classified under NAICS code 334390 for other communications equipment manufacturing. Performance is designated to occur in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is administered by the ASC Supplier Oper AE and AF Division within the Department of Defense. All work must comply with the technical and regulatory obligations tied to DoD procurement protocols, and interested parties must access the full solicitation through the provided DIBBS link.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

COVER, ACCESSThe contract pertains to the procurement of 41 units of a COVER, ACCESS item under solicitation SPE7L1-26-T-834S, with delivery required 116 days after award to the DLA Distribution Facility in New Cumberland, Pennsylvania. All items must comply with stringent DLA packaging and quality standards, including adherence to ASTM D3951 for non-hazardous materials and FED-STD-313 for hazardous materials, with palletization governed by RP001. Marking and labeling must follow MIL-STD-129 for shipment and MIL-STD-130N for permanent identification, including Data Matrix barcoding, while hazardous materials require compliance with OSHA’s Hazard Communication Standard and submission of approved Safety Data Sheets prior to award. Inspection and acceptance occur at origin, employing MIL-STD-1916 or ASQ H1331 zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; only zero non-conformances are permitted unless otherwise stated. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval. Export-controlled technical data is subject to ITAR or EAR regulations, restricting disclosure to foreign persons regardless of location, and contractors must be certified under the US/Canada Joint Certification Program, complete DLA export control training, and comply with DFARS 252.225-7048. The contractor must hold CMMC Level 2 certification for cybersecurity safeguards and meet all applicable FAR and DFARS clauses, including employment eligibility, combating trafficking, sustainable products, and accelerated payments to small business subcontractors. Payment must be submitted electronically through Wide Area WorkFlow, and the contract operates under simplified acquisition procedures with an inferred lowest price technically acceptable award basis, though formal evaluation factors are not specified. Offerors must provide their UEI and CAGE codes, represent their small business status and socioeconomic classifications, and ensure compliance with all regulatory requirements prior to submission via DIBBS by the stated deadline.

Hardware Manufacturing

POSTED

about 22 hours ago

DEADLINE

LEVER, REMOTE CONTROThis contract solicits 15 units of a lever remote control with part number 3040-00-614-7196 under solicitation SPE7L1-26-Q-1370, with a delivery deadline of 118 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions tied to drawings and quality assurance documents including DRW 11671161 Notes 7 and 8, and SQAP QA-19207-11671161, which apply to critical, major characteristics and only to major characteristic 101. The item is subject to stringent quality controls including tailored higher-level requirements for manufacturers and non-manufacturers, inspection and acceptance at origin, and rigorous configuration change management requiring engineering change proposals and variance requests. All components must comply with applicable Qualified Products Lists or Qualified Manufacturers Lists as outlined in procurement note H02. The contract prohibits the use of Class I ozone-depleting chemicals in any component or process, mandating approved substitutes where required. Technical data associated with this item is subject to export control under ITAR or EAR, making unauthorized disclosure—whether to foreign nationals in the U.S. or abroad—an infringement. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export-controlled data training, and DLA authorization may access such data, with DFARS 252.225-7048 strictly enforced. Packaging must meet DLA requirements, and government identification must be removed from non-accepted supplies. Cybersecurity requirements mandate CMMC Level 2 certification by a third-party assessment organization. The solicitation closed August 5, 2026, with performance to be delivered to Barstow, CA, under federal acquisition rules administered by the Department of Defense's Land Supply Chain.

Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 22 hours ago

DEADLINE

O-RINGThe contract is for the procurement of 857 O-rings with NSN/Part Number 5331-01-516-2648, issued under solicitation SPE7L1-26-T-880X with a response deadline of August 7, 2026, and a delivery requirement of 76 days after order. All items must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and must adhere to specific DLA directives including packaging standards, removal of government identification from non-accepted supplies, and mandatory retention of supply chain traceability documentation as outlined in DLA Directive Procurement Note C03 from August 2016. The use of class I ozone-depleting chemicals is strictly prohibited, and asbestos must not be present in any component; any substitute materials require formal approval per Clause L30 and Provision 4 conditions. The purchase request number is 7016086295, and the items are to be delivered to New Cumberland, Pennsylvania, 17070-5002. The contracting agency is the Department of Defense under the Land Supply Chain, with Kelly Day listed as the primary point of contact.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

O-RINGThis contract is for the procurement of 447 O-RINGS with NSN 5331-00-944-1525 under solicitation SPE7L1-26-T882K, with a total quantity requirement of 1860 units across all segments. The items must comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and must be manufactured to the current revision of the applicable MIL or industry-standard part specification, with prior revisions still acceptable for previously produced hardware. Only manufacturers and assemblers listed on the PRI-QPL-AMS7272 Qualified Products List are eligible to supply this item, and all products must be sourced from accredited facilities recognized by the Performance Review Institute. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and unspecified attributes are treated as major with verification levels assigned accordingly. The O-rings are classified as a TYPE I (Code Y) item with a non-extendable shelf life of 180 months and must be free of asbestos, with any previously approved asbestos-containing materials now prohibited. Packaging must meet MIL-DTL-117, Type II, Class C, Style 1 requirements, meaning they must be enclosed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor deliveries, foreign military sales, and stock shipments. The contract specifies delivery within 128 days after order issuance, with a response deadline of August 7, 2026, and falls under NAICS code 339991. The contracting office is the Department of Defense’s Land Supply Chain, with performance located at Tinker AFB, Oklahoma, and Kristie Fown is the primary point of contact for inquiries.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

GENERATOR, ENGINE ACCESThe contract pertains to the procurement of five generator engine accessories with NSN 2920-01-595-9464 and part number 4982228 from CUMMINS INC, under solicitation SPE7L1-26-T-880Y. Delivery is required within five days of contract award, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the point of origin. All items must be packaged in accordance with MIL-STD-2073-1E, using packing code Q, level B, and marked per MIL-STD-129 with no special marking required; palletization must comply with DLA packaging standards. The units are to be shipped to the General Depot of Naval Supplies in Kaohsiung, Taiwan, with freight details governed by DLA procedural notes and no single freight forwarder assigned. The technical and quality requirements referenced are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The purchase price is set at $5.00 per unit for a total of $25.00, and the required delivery date is July 28, 2026, with the solicitation posted on July 27, 2026 and responses due by August 7, 2026. The contracting officer is Kristina Derry of the Department of Defense, Land Supply Chain, and the contract is classified under NAICS code 336310.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

O-RINGThis contract pertains to the procurement of 1,630 O-RINGS with NSN 5331-01-080-9232 under solicitation SPE7L1-26-T-881A, issued by the Department of Defense’s Land Supply Chain. The items must be delivered within 87 days of award to Robins Air Force Base, Georgia, with full and open competition authorized. The technical and quality standards are defined by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. All supplies must be free of asbestos and ozone-depleting chemicals, and any substitute materials must be pre-approved unless explicitly permitted by the specifications. Government identification must be removed from non-accepted supplies, and covered defense information protocols may apply. The solicitation was posted on July 27, 2026, with responses due by August 7, 2026, and Kelly Day at DLA is the primary point of contact for inquiries.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

BRACKET, MOUNTINGThe contract is for the procurement of 13 mounting brackets identified by NSN 5340-00-133-8107, issued under solicitation SPE7L1-26-T-842C as a Total Small Business Set-Aside under NAICS code 332510. The item is to be manufactured using a metal casting process requiring specialized tooling, with sourcing and technical support available through DLA’s Aviation, Land & Maritime Supply Chains. Delivery is due 237 days after award to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB Origin terms requiring the contractor to assume all transportation costs to the designated destination. The contract mandates strict compliance with DLA packaging standards, including MIL-STD-129 for marking and labeling, MIL-STD-130N for Unique Item Identification and barcoding, and RP001 for palletization, while prohibiting the use of Class I ozone-depleting chemicals and requiring adherence to the DLA Master List of Technical and Quality Requirements which supersedes any conflicting specifications. The item contains components governed by Qualified Products or Manufacturers Lists, necessitating qualification compliance as outlined in procurement note H02. The contract imposes comprehensive cybersecurity and export control obligations, including mandatory CMMC Level 2 certification for the contractor or its third-party assessor and compliance with NIST SP 800-171 to safeguard Covered Defense Information as defined by RD002. All technical data associated with the item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons without prior authorization, and access is limited to contractors with approved JCP certification, completed DOD training, and DLA approval. Hazardous materials must be labeled and documented per 29 CFR 1910.1200 and FED-STD-313, with pre-award submission of hazard labels and Material Safety Data Sheets required. Ocean transportation must use U.S.-flag vessels unless a waiver is granted, and pre- and post-shipment notifications to MARAD are mandatory. Invoices must be submitted electronically via WAWF, and the contractor must affirm compliance with whistleblower protections, restrictions on former DoD official compensation, and employment eligibility verification. All proposals must be submitted through DIBBS by the deadline, and while no pricing data is provided, the award may be made using automated systems, with price being a significant factor under this small business-focused procurement.

Hardware Manufacturing

POSTED

about 22 hours ago

DEADLINE

GASKETThe contract specifies the procurement of a gasket with NSN 5330-01-344-9582 and part number MM432136, quantity one unit, to be delivered within five days to Fort Bliss, Texas, under solicitation SPE7L1-26-T-880B. Delivery is FOB origin, with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including use of a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II Class C Style 1 for UV-sensitive items, with no asbestos permitted. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item must be marked in accordance with MIL-STD-130N and palletized per DLA packaging requirements. Shipments are to be made via traceable freight, not parcel post, to the specified Fort Bliss address, with the federal supply classification and unit of issue governed by DLA standards. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality clauses identified by R or I numbers, with revisions controlled by the solicitation issue date. The designated point of contact is Kristina Derry, and the required delivery date is July 24, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

BRACKET, ANGLEThe contract pertains to the procurement of a BRACKET, ANGLE with NSN/Part Number 5340-01-572-6194, for a single unit under Purchase Request 7016529883. Delivery is required within five days of award, and the solicitation number is SPE7L1-26-T-485J, with responses due by July 30, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must conform to DLA packaging standards, and any non-accepted supplies must have government identification removed. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The place of performance is Fort Campbell, Tennessee, 42223-0000, with the contracting office under the Department of Defense’s Land Supply Chain. Primary point of contact is Kristina Derry, reachable via email and phone provided. The NAICS code is 332510, and the solicitation is classified as federal.

Hardware Manufacturing

POSTED

about 22 hours ago

DEADLINE

O-RING SETThe contract pertains to the procurement of an O-RING SET identified by National Stock Number 5331-01-728-9785 and part number KSD017628, with a total quantity of 2 kilotons. The item is classified under Federal Supply Classifications 5330/5331 and is highly susceptible to deterioration from ultraviolet radiation, necessitating strict packaging requirements. All units must be sealed in medium-duty, waterproof, greaseproof, and opaque bags conforming to MIL-DTL-117, Type II, Class C, Style 1, regardless of whether delivery is through Direct Vendor Delivery, Foreign Military Sales, or stock shipments. Packaging and preservation must align with MIL-STD-2073-1E and RP001 DLA packaging guidelines, using specific materials and codes such as WRAP MAT GB CUSH/DUNN and preservation method 33 (Cold/Dry), with marking and labeling strictly following MIL-STD-129, including the NSN and part number on each label. The item must be free of asbestos and ozone-depleting chemicals, with any substitutes requiring prior approval. Supply chain traceability documentation must be retained per DLA Procurement Note C03 from August 2016, and government identification must be removed from non-accepted supplies. The contract is issued under solicitation SPE7L1-26-T-847A with a response deadline of July 30, 2026, and a delivery requirement of 229 days after award, targeting delivery to the DDSP New Cumberland Facility in Pennsylvania. The delivery term is FOB Origin, and payment must be processed electronically via Wide Area WorkFlow, with invoices, receiving reports, and payment requests submitted in compliance with DFARS clauses. Inspection and acceptance occur at the destination by the Government under FAR 52.246-2. The solicitation mandates adherence to numerous FAR and DFARS clauses, including cybersecurity protections per NIST SP 800-171, prohibitions on hazardous materials like hexavalent chromium and asbestos, trafficking in persons compliance, employment eligibility verification, and restrictions on procurement from Communist Chinese military companies. Offerors must provide their Unique Entity Identifier and CAGE code, declare small business or socioeconomic status for price preference eligibility, and submit hazard labels and Safety Data Sheets prior to award. Proposals must be submitted electronically through

Other Engine Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

RETAINER, FLOATINGThis contract is a retainer agreement for a floating retainer part designated by NSN 5340014816884 and part number HS6067-9, sourced from SPS TECHNOLOGIES LLC under solicitation SPE7L1-26-U-0505. It specifies a total quantity of 65 units at a unit price of $65.00, with delivery required within 116 days FOB origin, and no variance allowed in quantity. The item is classified as a critical application item and must comply with DLA’s Master List of Technical and Quality Requirements, particularly MIL-STD-130N for identification marking, MIL-STD-129 for packaging and labeling, and ASTM D3951 for commercial packaging unless the material is hazardous, in which case FED-STD-313 applies. All packaging and palletization must adhere to RP001’s DLA packaging requirements, and government identification must be removed from non-accepted supplies. Inspection and acceptance occur at the destination point. The contract is a total small business set-aside under NAICS code 332510, issued by the Department of Defense’s Land Supply Chain under the Defense Logistics Agency. It was posted on July 27, 2026, with responses due by August 11, 2026. The unit of issue is each (EA), consistent with DoD standards, and the buyer may not purchase the full estimated quantity as listed. Technical specifications referenced are controlled by the latest revision of the DLA Master List effective on the solicitation issue date, and all packaging compliance supersedes any commercial standards unless superseded by DLA’s directives. Point of contact for the solicitation is Paul Kelley, and additional details can be referenced through the DIBBS portal.

Hardware Manufacturing

POSTED

about 22 hours ago

DEADLINE

PISTON, LINEAR ACTUAThe contract is for one linear actuating cylinder piston, identified by NSN 3040-01-167-9213 and part number 8J0113 from Caterpillar Inc, with a single unit of issue and a total price of $1.00. Delivery is required within 10 days to Fort McCoy, Wisconsin, under FOB origin terms, with no variance allowed in quantity. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including compliance with MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements for Procurement, and shipments must be delivered via traceable freight methods, excluding parcel post. The shipment is designated as an RDD/ANMCS movement with a reference number and project code TP 2, and must be marked for delivery to the designated government facility. Inspection and acceptance occur at the destination, and the original delivery date is July 23, 2026. The contract is issued under solicitation SPE7L1-26-T-879S, with a response deadline of August 7, 2026, and falls under NAICS code 333613 for industrial machinery manufacturing. All requirements are governed by the DLA Master List, and government use identifiers and control codes are included for internal tracking and logistics purposes.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE