Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BRAND NAME HARRINGTON HOISTS INC. - STATIC & DYNAMIC LOAD TESTER

Active
N0040626Q0440Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Fleet Logistics Center Puget Sound is seeking a single Harrington Hoists, Inc. Static and Dynamic Load Tester with a capacity to test hoists up to 10 tons, powered by a 220V single-phase supply, and sized at 5 ft x 7 ft 2 in x 8 ft 9 in, capable of testing at speeds up to 35 feet per minute. This is a brand-name requirement due to the necessity for compatibility with existing equipment and systems, and the unit must meet ANSI/ASME B30.16 and B30.21 testing standards. The procurement is structured as a Small Business Set Aside under NAICS code 333923, with bids due by August 10, 2026, and an anticipated award date in August 2026. Offers will be evaluated based on technical capability including delivery schedule, price, and past performance, with no factor weighted higher than another, and the Government retains full discretion to determine whether to proceed with a competitive process based on responses. Contracting Officer Anna Rose M. Fulton is the point of contact, and proposals must be submitted through the designated SAM.gov portal.

General Info

Harrington Hoists static/dynamic load tester for 10 tons, 220V, ANSI compliant, small business set aside, bids due August 10, 2026.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget SoundView Agency

NAICS

333923 - Overhead Traveling Crane, Hoist, and Monorail System ManufacturingView NAICS

Place of Performance

WA

Set-Aside

SBA

Documents

(2)

N00406-26-Q-0440+SOLICITATION.pdf

PDF

1.3.5+1301380244+One+Source+Brand+Name+Justification+-+Redacted.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound
Contacts1 person available
OfficeBREMERTON, WA, 98314-5100, USA
Organization / Agency
Department Of Defense → Navsup Flt Logistics Ctr Puget Sound
View Agency Profile
Office AddressBREMERTON, WA, 98314-5100, USA
Contacts
Anna Rose Fulton
contact@example.gov

Full Description

Show more

Fleet Logistics Center Puget Sound (FLCPS) intends to solicit for a Brand Name requirement for a Harrington Hoists, Inc. Static and Dynamic Load Tester.


Requirement:


  • Capacity: Capable of testing hoists through 10 tons
  • Power Supply: 220V, single-phase
  • Dimensions: 5 ft x 7 ft 2 in x 8 ft 9 in
  • Test Speed: Up to 35 feet per minute
  • Quantity: One (1)

(See attached solicitation for complete specifications.)


This procurement is for a Brand Name Harrington Hoists, Inc. Static and Dynamic Load Tester due to the requirement for compatibility with existing equipment and systems. The equipment is designed to perform hoist testing in accordance with ANSI/ASME B30.16 and ANSI/ASME B30.21 standards. Interested companies may identify their interest and capability to respond to the requirement, which will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination not to compete this action based upon responses received to this notice is solely within the discretion of the Government.  


The Government will evaluate the offeror’s price for reasonableness and past performance as part of the responsibility determination in accordance with RFO 12.203.


Quotes will be evaluated in accordance with RFO 12.203, the Government will select the most advantageous offer based on the following evaluation factors: technical including delivery date, price, and past performance in no order of relative importance. 


Anticipated Award Date: August 2026


Contracting Officer: Anna Rose M. Fulton annarose.m.fulton.civ@us.navy.mil

Similar Contracts

Same NAICS industry code

NAICS: 333923
New
DIBBS
ADAPTER, HOISTING
Solicitation # SPE8EE-26-T-2128
The item is an ADAPTER, HOISTING with NSN 3940-01-643-2398, quantity one, required for delivery within 20 days of award under purchase request 7017554725. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure or transfer to foreign persons regardless of location, including foreign national employees and overseas subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export-controlled data training, and a cleared DLA questionnaire may access the controlled data. The solicitation number is SPE8EE-26-T-2128, posted on July 21, 2026, with responses due by August 3, 2026. Performance is designated for San Diego, CA, 92155-5020, under NAICS code 333923, managed by the Department of Defense through the Construction & Equipment Manu & Con organization. Primary point of contact is Philip Ferrara, reachable at the provided email and phone number.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333923
New
DIBBS
TIE DOWN, CARGO, VEHI
Solicitation # SPE8EF-26-T-1536
This contract pertains to the procurement of 59 units of TIE DOWN, CARGO, VEHI, identified by NSN 3990-01-664-2842 and part number 35MTC/1823, under solicitation SPE8EF-26-T-1536. The item must be delivered within three days of award, FOB origin, with no tolerance for quantity variance—exactly 59 units are required. Inspection and acceptance occur at the destination. Packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and containerization, with marking adhering to MIL-STD-129 and no special marking code applied. Palletization must follow DLA guidelines, and the unit of issue is AY. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, with the same location listed for freight shipping. The required ship date is August 17, 2026, and the original delivery deadline is October 18, 2026. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. All transportation logistics must adhere to DLAD Proc Notes C19 and C20. The contract was posted on August 2, 2026, with responses due by August 13, 2026, and falls under NAICS code 333923. Point of contact is Russell Keiser, reachable via email and phone provided.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333923
New
DIBBS
REPAIR KIT, WINCH
Solicitation # SPE7L0-26-T-0391
The contract is for the procurement of a Repair Kit, Winch under solicitation SPE7L0-26-T-0391, with a required delivery of five units within five days of order. Each unit is priced at $5.00, totaling $25.00, and the material is identified by NSN 3950-01-603-1433 and part number 95SK416. All items must be packaged in compliance with ASTM D3951 and governed by DLA’s Master List of Technical and Quality Requirements, with labeling and marking strictly following MIL-STD-129. The unit of issue is each, with no variance allowed in quantity. Deliveries are FOB origin, and inspection and acceptance occur at the destination. Packaging must adhere to DLA’s packaging requirements and be palletized according to RP001 standards. Goods must be shipped by the fastest traceable method, excluding parcel post, to the designated DLA depot in Texarkana, Texas, with full compliance to marking instructions including the M/F code W45G186208019Q. The original required delivery date is July 30, 2026, and the contract is issued under a federal acquisition framework governed by Department of Defense guidelines and technical specifications.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333923
New
Federal
EUR/Athens - Electric Scissor and Compact Crawler Boom Lifts
Solicitation # 19GR1026Q0042
The U.S. Embassy Athens is seeking bids for the purchase of one Compact Crawler Boom Lift and one Electric Scissor Lift to support operations at the Chancery in Athens, Greece. The solicitation, numbered 19GR1026Q0042, was posted on July 31, 2026, with responses due by August 30, 2026, and is classified as a presolicitation, indicating the government is gathering market information before finalizing procurement details. The procurement falls under NAICS code 333923, which classifies it within the construction machinery manufacturing sector, and is being managed by the Department of State through its office in Washington, D.C. The place of performance is explicitly set at the U.S. Embassy in Athens, with delivery and installation required at the Chancery located in Attikí, zip code 10160. Primary point of contact for all inquiries is Dresden A. Kalin, with secondary support provided by Tolis Mouyios, both reachable via AthProcurement@state.gov. The contract will be administered by the American Embassy Athens under the Department of State, with all contractual obligations tied to delivery and operational readiness at the embassy site in Greece. The equipment must meet technical specifications suitable for use in the embassy’s maintenance and construction activities, and vendors are expected to provide documentation and compliance information to ensure the lifts function safely and reliably in the local environment. All proposals must be submitted through the SAM.gov system prior to the deadline to be considered.
American Embassy Athens

POSTED

4 days ago

DEADLINE

in 26 days
View Details
NAICS: 333923
New
Federal
FA480926Q0071 - FY26_PKA_Bay Hoist Repair Bldg. 2202 for 4 MUNS
Solicitation # FA480926Q9990
This contract solicitation, designated FA480926Q0071, seeks to repair bay hoists in Building 2202 at Seymour Johnson Air Force Base, North Carolina, to support four Military Utility Narrow Gauge Systems in accordance with the Statement of Work. The work is set aside exclusively for small businesses under the SBA Total Set Aside category, with the NAICS code 333923 indicating specialization in other industrial machinery manufacturing services. The solicitation was posted on July 31, 2026, and responses are due by August 17, 2026, at 5:00 p.m. EST. The contracting office is the 4th Cons Squadron at the Department of Defense, with performance taking place on-site at the base. Primary point of contact is Khadijah Jones, reachable by phone at 919-722-1766 or email khadijah.jones.1@us.af.mil, with secondary support provided by SSgt Ashley Goodwin at 919-722-1757 or ashley.goodwin.2@us.af.mil. All proposals must be submitted through the SAM.gov portal linked in the solicitation.
FA4809 4TH Cons Squadron Cc

POSTED

4 days ago

DEADLINE

in 13 days
View Details
NAICS: 333923
New
DIBBS
Beam-Type Sling Supply and DeliveryThe contract requires the supply, packaging, labeling, and delivery of three beam-type slings with NSN 3940017021064, all of which must fully comply with Department of Defense Logistics Agency requirements, MIL-STD-129 packaging and labeling standards, and OSHA hazard communication regulations to ensure safety and uniformity in military logistics. The slings are intended for use in heavy lifting operations and must meet strict quality and performance benchmarks consistent with defense procurement protocols. Delivery must be completed to the specified place of performance in Tracy, California, with a zip code of 95304-5000, and all items must be properly documented and packaged to facilitate seamless receipt and inventory management. The solicitation was posted on July 30, 2026, with a response deadline of August 4, 2026, and it is classified as a subcontract under NAICS code 333923, which corresponds to other industrial machinery manufacturing. The contracting agency is the Department of Defense under the organization name Construction & Equipment Manu & Con, indicating the procurement is managed internally by a defense-related branch focused on equipment readiness. No set-aside type is specified, meaning the contract is open to all eligible contractors without preference for small, minority-owned, or other specialized business categories. Interested parties must submit proposals through the official DIBBS platform linked in the contract details to ensure compliance with federal procurement procedures.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

5 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 333923
New
DIBBS
SLING, BEAM TYPE
Solicitation # SPE8EE-26-T-1917
The contract pertains to the procurement of three SLING, BEAM TYPE units with NSN/Part Number 3940-01-702-1064 under solicitation SPE8EE-26-T-1917, issued by the Department of Defense through the Defense Logistics Agency. Delivery is required within 167 days after order placement, and responses must be submitted by August 4, 2026, with the solicitation posted on July 30, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. The item includes technical data subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA training and questionnaire. The place of performance is Tracy, California, 95304-5000, with Philip Ferrara designated as the primary point of contact for inquiries.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

5 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 333923
New
DIBBS
ASSEMBLY SYSTEM
Solicitation # SPE8EF-26-T-1531
The contract pertains to the procurement of one unit of an Assembly System identified by NSN 3990016798142 and part number LHS4040030, sourced from Iowa Mold Tooling Co Inc, with a required delivery within five days of award, delivered FOB origin. The item is subject to strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications such as ASTM D3951. Packaging must comply fully with MIL-STD-129 labeling and DLA Packaging Requirements for Procurement, including palletization per RP001, and all items must be marked and labeled accordingly with no government identification removed from non-accepted supplies. The unit of issue is each, with zero variance allowed in quantity. Inspection and acceptance occur at the destination location. The delivery destination is Fort Stewart, GA, to the address designated under W81U3R, and shipment must be made via traceable freight methods only—parcel post is prohibited. The shipment is classified as an RDD(3-POS RDD)/NMCS and linked to project TP1 with a tracking control number W81U3R61960506. The solicitation is a total small business set-aside under NAICS code 333923, issued by the Department of Defense under contract number SPE8EF-26-T-1531, with a response deadline of August 10, 2026, and an original required delivery date of July 22, 2026. Government-use-only fields denote specific administrative and distribution codes, and the point of contact for inquiries is Russell Keiser of DLA. All packaging, marking, and shipping must adhere precisely to the referenced military and DLA standards, with precedence given to DLA directives over any general industry guidelines.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 333923
New
DIBBS
EXTENSION, TORQUE TU
Solicitation # SPE7M4-26-T-293R
The contract pertains to the procurement of an Extension, Torque Tube with NSN 2030-01-235-7648 and part numbers 5749597-123, supplied by SHAPES GROUP LTD and TEXTRON SYSTEMS CORP, in a quantity of eight units. Delivery is required within 193 days, FOB origin, to a designated receiving warehouse in Tracy, California, with a firm ship date of February 20, 2027. The contract enforces strict compliance with DLA packaging standards based on MIL-STD-2073-1E and MIL-STD-129, requiring unit packaging with specific materials and methods, and prohibits the use of plastics for wrapping or cushioning where feasible. Mercury and mercury-containing compounds are explicitly banned from contact with the hardware, except under limited, specified exceptions for functional uses like batteries or certain instruments, which must include secondary containment per NAVSEA 5100-003D. The item is classified as a critical application, and any configuration changes require an Engineering Change Proposal or formal variance request. Inspection and acceptance occur at the destination, with zero variance allowed on quantity. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition type. The contract is issued under solicitation SPE7M4-26-T-293R with a NAICS code of 333923, and all terms align with DoD procurement protocols.
FLUID HANDLING DIVISION

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 333923
New
DIBBS
SLING, BEAM TYPE
Solicitation # SPE8EE-26-T-2198
The contract solicits four beam-type slings with NSN 3940-01-702-1064 under solicitation number SPE8EE-26-T-2198, with a response deadline of August 10, 2026, and a delivery requirement of 160 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item includes technical data subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign national employees and subsidiaries, even within the United States. Compliance with DFARS 252.225-7048 is mandatory, and contractors must possess a valid US/Canada Joint Certification Program certification, complete mandatory DLA export control training and questionnaire, and receive explicit approval from the DLA controlling authority to access the controlled data. The contracting activity is under the Department of Defense, with performance due at Tracy, California, 95304-5000, and primary point of contact is Philip Ferrara, reachable via phone and email provided.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 333923
New
DIBBS
ADAPTER, HOISTING
Solicitation # SPE8EE-26-T-2196
The contract specifies the procurement of three Adapter, Hoisting items with part number 23032998 and NSN 3940013785229, each priced at $3.00 per unit, and two additional units priced at $2.00 per unit, totaling five units to be delivered under solicitation SPE8EE-26-T-2196. All items must comply with stringent military standards including MIL-STD-130 for Item Unique Identification, MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging, with DLA’s Master List of Technical and Quality Requirements overriding any conflicting specifications. Packaging and palletization must adhere to RP001 DLA Packaging Requirements, and each unit must be shipped via traceable freight methods with parcel post strictly prohibited. Deliveries are due within 20 days of order placement with a required delivery date of July 27, 2026, and inspection and acceptance occur at the destination. Items are to be delivered to multiple DoD facilities across the United States, including locations in New Orleans, Joint Base McGuire-Dix-Lakehurst, Point Mugu, and Andrews AFB, each with specific shipping addresses and contact details. The contract enforces a zero variance in quantity, applies the DFARS 252.211-7003 clause for Covered Defense Information, and identifies the item as a Critical Application Item, requiring strict adherence to all technical, quality, and logistical directives provided by the Defense Logistics Agency.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

6 days ago

DEADLINE

in 7 days
View Details
NAICS: 333923
New
DIBBS
TIE DOWN, CARGO, VEHI
Solicitation # SPE8EF-26-T-1528
This contract specifies the procurement of 88 units of cargo tie-down equipment for vehicles under the NSN 3990017238158 and part number 70MTC818B, with a total contract value of $88.00 per unit, resulting in a total price of $7,744.00. The delivery is required FOB origin within 94 days, with inspection and acceptance occurring at the destination, and no variance is allowed in quantity. Packaging must conform to MIL-STD-2073-1E with specific preservation methods including preservative type 10 and dry storage, and marking must follow MIL-STD-129 with no special marking required. Palletization and packaging adhere to DLA’s procurement requirements, and the shipment is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract references technical and quality standards from the DLA Master List, applicable based on solicitation and award dates, and includes provisions for the handling of covered defense information. The unit of issue is AY, consistent with DoD standards, and transportation logistics follow specified DLA procedures. The solicitation number is SPE8EF-26-T-1528, with a response deadline of August 10, 2026, and a posted date of July 29, 2026. The required delivery date is November 11, 2026, though the need ship date is earlier on May 14, 2026, indicating potential scheduling flexibility. The contracting office is under the Department of Defense, with Russell Keiser as the primary point of contact, and the NAICS code 333923 applies to the type of equipment being procured.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

6 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

Same awarding agency

NAICS: 335999
New
Federal
5975 STUFFING TUBE
Solicitation # N0040626Q0285
The U.S. Navy’s Fleet Logistics Center Puget Sound is seeking to procure a specified set of stuffing tubes and a cross-tier component under a brand-name requirement exclusively for items manufactured by Research Tool & Die Works, with part numbers including M24235/18-061 MOD, M24235/18-063 MOD, M24235/18-062 MOD, M24235/18-004 MOD, M24235/18-002 MOD, M24235/18-064 MOD, 0A6SSC, and 9M-06. These components must conform to specification MIL-S-24235/18MOD, be complete with gland nut and gland ring, and be fabricated from corrosion-resistant steel in either CRES-316 or CRES-316L grade, with specific sizes and lengths defined for each part number and application—either for deck or bulkhead use. The procurement is structured as a firm-fixed-price contract with a total small business set-aside under NAICS code 335999, restricting eligibility to small businesses registered in SAM.gov. All offers must include full compliance with the technical specifications, and any deviations must be explicitly noted; failure to do so will result in the quotation being deemed non-responsive. Packaging must use double-layer cardboard boxes, adhere to ASTM-D-3951 standards, prohibit asbestos, excelsior, and loose fill polystyrene, and comply with MIL-STD-129 and MIL-STD-130 for marking and unique item identification. Delivery must occur under FOB origin terms, with the government responsible for transportation, and acceptance will be conducted by the government at the destination in Yokosuka, Japan, requiring individual package tracking for UPS or FedEx shipments. Evaluation will be based on price, delivery performance, technical compliance, and past performance, with no single factor weighted over another, and the highest-value offer selected for potential single award. All contractors must be registered in the System for Award Management, comply with requirements including electronic invoicing via WAWF using the COMBO document type, and affirm adherence to prohibitions on hexavalent chromium, business with the Maduro regime, and procurement from Xinjiang, as well as meet cybersecurity controls under NIST SP 800-171 and safeguard
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 561910
New
Federal
Military-Compliant Packaging, Marking, and Shipment ServicesThe contract requires the provision of packaging, marking, and shipment services for an overhaul kit and studs, with strict adherence to military and federal standards including MIL-STD-129 for marking, MIL-STD-130 for item identification, ASTM-D-3951 for packaging, and DFARS 252.211-7003 for defense federal acquisition requirements. All services must ensure full compliance for delivery to Japan, necessitating precise labelling, durable packaging materials, and documented handling procedures to meet international military shipping expectations. The work is classified as a subcontract under NAICS code 561910, indicating it falls within support activities for animal and pet care, although the actual scope is logistics and packaging for defense materiel. The solicitation, issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense, opens on July 31, 2026, and requires responses by August 13, 2026, at 5:00 PM. Although no specific point of contact or place of performance is listed, the delivery destination is explicitly Japan, and all activities must align with U.S. defense logistics protocols. The absence of a set-aside classification suggests this opportunity is open to all eligible contractors without preference based on size or status. Contractors must ensure their processes and documentation fully satisfy the referenced standards to avoid delivery rejection or non-compliance penalties.
Packaging and Labeling Services

POSTED

4 days ago

DEADLINE

in 9 days
View Details
NAICS: 332996
New
Federal
Supply of Precision Studs (High-Strength Fasteners for Marine Applications)Sixteen high-strength precision-engineered STUDs, part number H73918-01-1-10, are to be supplied for use in high-stress marine propulsion systems and must be fully compatible with the designated overhaul kit. These fasteners are critical components requiring exacting manufacturing standards to ensure reliability under extreme operating conditions. The contract is classified as a subcontract under NAICS code 332996 and is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, a Department of Defense entity. The opportunity was posted on July 31, 2026, with a mandatory response deadline of August 13, 2026, at 5:00 PM Eastern Time. There is no set-aside designation or specific place of performance indicated, and no point of contact is listed in the solicitation details. All submissions must be made through the designated SAM.gov portal to be considered valid.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

4 days ago

DEADLINE

in 9 days
View Details
NAICS: 336612
New
Federal
Supply of Major Overhaul Kit (Port Side Stern Tube Shaft Seal Assembly)The contract solicits the supply of one complete Major Overhaul Kit designated as Part H73918-01-OK, specifically for the port side stern tube shaft seal assembly used in U.S. Navy vessels. This kit includes all necessary components required to perform a full overhaul of marine propulsion shaft seals, ensuring operational readiness and compliance with naval maintenance standards. The equipment is critical for maintaining the integrity of propulsion systems and preventing water ingress in naval shipyard and fleet environments. The opportunity is posted as a subcontract with a response deadline of August 13, 2026 at 5:00 PM, and was published on July 31, 2026. The North American Industry Classification System code 336612 identifies it under Ship and Boat Building and Repair, and the contracting activity is managed by Navsup Fleet Logistics Center Puget Sound under the Department of Defense. Performance will occur within the U.S. Navy’s infrastructure, though specific location details are not provided. The procurement supports the sustained serviceability of naval vessels through the provision of mission-critical sealing components.
Boat Building

POSTED

4 days ago

DEADLINE

in 9 days
View Details
NAICS: 483112
New
Federal
International Freight and Delivery to Sasebo, JapanA small business subcontract is being sought for the international freight and delivery of a packaged roller door from a U.S. origin point to the U.S. Navy facility in Sasebo, Japan, with full responsibility for customs clearance, all required documentation, and final delivery at the destination. The shipment is to be handled under FOB-origin terms, meaning the contractor assumes all costs and risks once the goods are loaded at the origin, including transportation, export compliance, and Japanese import procedures. The contract falls under NAICS code 483112, indicating it is related to water transportation of freight, and is designated as a Small Business Set Aside for total subcontracting, ensuring eligibility is restricted to businesses certified as small under SBA guidelines. The solicitation was posted on July 31, 2026, with responses due by 8:00 PM ET on August 7, 2026, and is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound on behalf of the Department of Defense, requiring precise coordination between U.S. export regulations and Japanese customs requirements to ensure timely and compliant delivery.
Deep Sea Passenger Transportation

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 811219
New
Federal
Unique Item Identification (UII) and Data Matrix MarkingThe contract requires the application of permanent, MIL-STD-130 compliant Data Matrix symbols using ISO/IEC 16022 ECC200 and Format 06 standards to uniquely identify each roller door. This marking must be durable and meet all Department of Defense requirements for item identification, ensuring traceability throughout the item’s lifecycle. The work falls under a Small Business Set Aside, specifically designated as a Total Small Business Set Aside, indicating that only eligible small businesses may compete for this subcontract. The North American Industry Classification System code is 811219, which corresponds to other commercial and industrial machinery and equipment repair and maintenance. The solicitation is issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, under the Department of Defense, with a response deadline of August 7, 2026, and a posted date of July 31, 2026. Performance location details are not specified, but the work is expected to support federal defense logistics requirements.
Other Electronic and Precision Equipment Repair and Maintenance

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 493190
New
Federal
Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of military-compliant packaging and preservation services adhering to MIL-STD-2073 and ASTM-D-3951 standards for overseas shipment to Japan, ensuring all materials meet rigorous defense logistics requirements. This includes the use of proper blocking and bracing techniques to secure items during transit and the exclusive use of ISPM-15 certified wood materials to comply with international phytosanitary regulations. The work is designated as a Small Business Set Aside under the SBA, with the North American Industry Classification System code 493190 identifying it as other support activities for transportation. The contract is issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense and is structured as a subcontract. Interested parties must submit responses by August 7, 2026, with the opportunity posted on July 31, 2026.
Other Warehousing and Storage

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 332321
New
Federal
Supply of High-Impact Hurricane Roller Curtain DoorThe contract calls for the supply of one Alpine Redi Storm 60 PSF rolling hurricane door featuring a stainless steel finish, hand-chain operation, and a 20,000-cycle spring capacity, specifically designated for use at a naval facility in Japan. The product must meet stringent durability and performance standards to ensure protection against extreme weather events in a high-risk marine environment, with the hand-chain mechanism providing reliable manual operation in the event of power failure or system disruption. The 20,000-cycle spring rating indicates a long service life under repeated use, critical for a military installation requiring consistent operational readiness. This is a subcontract under a Small Business Set Aside classification, meaning only eligible small businesses may respond, and it is governed under NAICS code 332321 for metal door and window manufacturing. The solicitation was posted on July 31, 2026, with a response deadline set for August 7, 2026, allowing for a one-week window for potential vendors to submit proposals. The contracting activity is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense, indicating the procurement is part of a larger defense infrastructure initiative. The place of performance is in Japan, requiring the vendor to account for international shipping, compliance with local and defense regulations, and potential customs or logistical challenges in delivering and installing the unit.
Metal Window and Door Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 335129
New
Federal
Emergency Lighting Strip SupplyThe contract is for the supply of ten emergency lighting strips with part number S1S1S1, designed for low-voltage, long-duration operation to ensure cabin safety in marine or aerospace environments. These lighting units are critical for maintaining visibility and safety during power outages or emergency scenarios, meeting stringent operational requirements for durability and reliability under extreme conditions. The contract is classified as a subcontract under NAICS code 335129, indicating it falls within the broader category of electrical lighting equipment manufacturing. It was posted on July 31, 2026, with a response deadline of August 12, 2026, at 5:00 PM, giving potential suppliers a limited window to submit proposals. The agency responsible is the Navsup Fleet Logistics Center Puget Sound, operating under the Department of Defense, which underscores the sensitive and mission-critical nature of the equipment. Although specific location details for performance or delivery are not provided, the intent is for the lighting strips to support operations in demanding environments where standard lighting systems would be insufficient. All submissions must comply with technical and performance specifications tied to the part number and intended use without room for substitution or deviation.
Other Lighting Equipment Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
Federal
Fire Detection Sensor SupplyThe contract pertains to the supply of fire detection sensors with part number J1J1J1, required to meet stringent aerospace and marine safety standards including MIL-STD-810, ensuring robust performance under extreme environmental conditions. This subcontract is solicited by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, an agency under the Department of Defense, and is specifically intended for providers capable of delivering certified components compliant with military-grade specifications. The solicitation was posted on July 31, 2026, with a deadline for responses set for August 12, 2026, at 5:00 PM, offering a limited window for qualified vendors to submit proposals. The North American Industry Classification System code 334511 indicates the focus on manufacturing other electronic components, aligning the requirement with specialized sensor production expertise. Performance is expected to support defense operations without specific location constraints, allowing flexible logistics planning while maintaining strict adherence to technical and compliance benchmarks.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
Federal
Data Network Switch SupplyThe contract solicits the supply of four ruggedized data network switches, part number I9I9I9, designed to meet naval EMI/EMC standards for reliable onboard connectivity in military environments. These switches are intended for use in demanding maritime conditions where electromagnetic interference protection and durable construction are critical for mission-critical communications. The solicitation is issued as a subcontract under NAICS code 334511, which corresponds to the manufacturing of communications equipment, and is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. The opportunity was posted on July 31, 2026, with a mandatory response deadline of August 12, 2026, at 5:00 PM, leaving a limited window for qualified vendors to submit proposals. Performance location and point of contact details are not specified, but the equipment must be delivered to support naval operations, and compliance with strict military-grade electromagnetic compatibility requirements is non-negotiable.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
Federal
Electrical Harness SupplyThe contract pertains to the supply of a main electrical harness with part number H8H8H8, specifically designed for integration into lavatory units and requiring full EMI/RFI shielding to ensure electromagnetic compatibility in sensitive environments. The harness must meet all applicable MIL-SPEC standards to guarantee durability, performance, and reliability under demanding operational conditions typical of military and defense applications. The work is being procured as a subcontract under the NAICS code 335931, which classifies it within the electrical component and accessory manufacturing sector. The solicitation was posted on July 31, 2026, with a firm response deadline of August 12, 2026, at 5:00 PM. The contracting entity is the Naval Supply Systems Command Fleet Logistics Center Puget Sound, acting on behalf of the Department of Defense, indicating this is a defense-related requirement. While specific performance locations and point of contact details are not provided, the nature of the procurement and the agency involved confirm the project’s alignment with U.S. military equipment integration standards and timelines. Bidders must ensure compliance with all technical, quality, and delivery requirements to be considered for award.
Current-Carrying Wiring Device Manufacturing

POSTED

4 days ago

DEADLINE

in 8 days
View Details