Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Breathing Air Filtration and Purity Assurance System Supply

Active

Federal

Response Deadline08/24/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense, specifically FA4661 7 Cons Cd, is seeking a subcontractor for the Breathing Air Filtration and Purity Assurance System Supply. This contract involves the provision of multi-stage filtration systems designed to ensure compressed air adheres to Grade D breathing air quality standards as defined by NIOSH and NFPA 1989. The systems must effectively remove moisture, oil, carbon monoxide, and particulates to ensure safety and compliance. This opportunity is designated as a total Small Business Set Aside under NAICS code 333611. The place of performance is located at Dyess AFB, zip code 79607. Interested parties must submit their responses by the deadline of August 24, 2026.

General Info

DoD seeks small business subcontractor for breathing air filtration systems at Dyess AFB.

Agency

Department Of Defense → FA4661 7 Cons CdView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

Dyess AFB, TX, 79607, USA

Set-Aside

SBA

Documents

This scope was carved out of FA466126Q0092.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Mobile Breathing System

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 14

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 09:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4661 7 Cons Cd

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4661 7 Cons Cd

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply multi-stage filtration systems ensuring compressed air meets Grade D breathing air quality per NIOSH and NFPA 1989, including removal of moisture, oil, CO, and particulates.

Similar Contracts

Same NAICS industry code

ROTOR, TURBINE, NONAI

Solicitation # SPE4A6-26-T-09EF

The contract pertains to a turbine rotor, designated as NONAI, with part number 3206499000 and NSN 2835-01-643-7341, supplied by Geiger Pump and Equipment Company under solicitation SPE4A6-26-T-09EF. The item is to be delivered in a single unit with a firm fixed price and zero variance in quantity, due within 20 days of contract award, delivered FOB destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and no special marking code applied. The rotor is not required to have item unique identification, and no shelf life restrictions apply. The delivery address is a vessel shipment to USS MICHAEL MONSOOR DDG 1001 at APO AP 96694, with specific transport instructions prohibiting parcel post and mandating the fastest traceable means under DLA procedural notes. The item is subject to technical and quality requirements referenced from the DLA Master List, including sampling protocols per MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited in or on the hardware except for specific functional uses defined by NAVSEA, and any portable devices containing mercury must include a secondary containment as per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and the contract is subject to federal acquisition regulations with no set-aside type specified.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Auxiliary Power and Hydraulic Pump SupplyThe Department of Defense, specifically the W7NJ Uspfo Activity Mo Arng, is seeking a subcontractor for the supply of critical aircraft components, including APU motor pumps, power steering units, and hydraulic pumps. These parts are essential for supporting aircraft auxiliary power and ground maneuverability. The contract falls under NAICS code 333611 and is designated as a total small business set-aside. The solicitation was posted on August 14, 2026, with a response deadline of August 31, 2026. Performance for this contract is located in the 65803 zip code area. Interested parties must submit their responses by the specified deadline to be considered for this procurement opportunity.

W7NJ Uspfo Activity Mo Arng

POSTED

DEADLINE

Centrifugal Pump Impeller SupplyThis subcontract opportunity with the Department of Defense Maritime Supply Chain involves the supply of one centrifugal pump impeller under NSN 4320012479259. The contractor must ensure the item meets all military specifications and adheres to federal hazardous materials regulations regarding packaging, labeling, and shipping. The procurement is designated as a Total Small Business Set-Aside under NAICS code 333611. Interested parties must submit their responses by August 24, 2026, for performance at the FPO location.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

COVER, BLANKING CFF

Solicitation # SPE4A5-26-T-355K

This contract is for the procurement of five units of Blanking Covers, identified by NSN 2835-01-015-7355 and General Electric part number L21220P01. The order is managed under solicitation SPE4A5-26-T-355K with a required delivery date of August 13, 2027, and a delivery window of 169 days. Shipping is FOB Origin, with the final destination being DLA Distribution San Diego. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

BAFFLE, AIRFLOW, NONA

Solicitation # SPE4A6-26-T-13VT

Solicitation SPE4A6-26-T-13VT is a federal procurement issued by the ASC Commodities Division of the Department of Defense for 25 units of Airflow Baffles (NSN 2835-01-674-5028). The contract requires delivery to DLA Distribution Red River in Texarkana, Texas, with a delivery timeline of 177 days after receipt of order. The terms are FOB Origin, and all invoicing and payment requests must be processed electronically through the Wide Area Workflow system. The contractor must adhere to strict quality and technical standards, including MIL-STD-1916 or ASQ H1331 for zero-based sampling and SAE AS9003 or ISO 9001 for quality systems. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, utilizing specific preservation methods to ensure items are clean and dry. Due to the nature of the technical data, this procurement is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorizations. Additional compliance requirements include NIST SP 800-171 for protecting controlled unclassified information and DFARS regulations regarding the use of U.S.-flag vessels for ocean transportation. The contractor is also responsible for providing a Certificate of Conformance per FAR 52.246-15 and ensuring all hazardous materials are labeled according to OSHA standards. Proposals must be submitted via the Defense Industrial Base Business System by August 14, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

PACKING RING ASSEMB

Solicitation # SPE7L5-26-T-4999

This contract is for the procurement of 13 units of Packing Ring Assemblies, identified by NSN 2825004217496. The items are designated as critical application items and are associated with part numbers from Curtiss-Wright Electro-Mechanical Corp and General Electric Company. Delivery is required within 86 days, with a need ship date of August 4, 2026, and an original required delivery date of September 11, 2026. The shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. Specific preservation standards require ferrous metal components to be treated with P-2 preservative. Packaging requirements vary by weight, utilizing individual bagging and cushioning for smaller items and ASTM D6251 or PPP-B-621 wood boxes for sets weighing 40 pounds or more. Additionally, the contract stipulates compliance with CMMC Level 2 self-assessment, restrictions on the use of mercury, and the removal of government identification from non-accepted supplies.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Gas Turbine Engine (C-130)This subcontract, managed by the Department of Defense through the DLA Aviation office in Ogden, requires the supply of one gas turbine engine for C-130 aircraft. The specific equipment is identified by NSN 2835-01-438-5698 RP and part number 3800599-1. The procurement falls under NAICS code 333611 and mandates full IUID traceability, strict warranty compliance, and delivery terms based on F.O.B. origin. The opportunity was posted on August 13, 2026, with a response deadline set for September 15, 2026. Interested parties must ensure all technical specifications and delivery requirements are met to comply with the agency's standards for aircraft engine procurement.

Ut DLA Aviation At Ogden

POSTED

DEADLINE

in about 1 month

NSN 2835-01-152-6306, FUEL CONTROL SERVOVALVE, WSDC: 05F, AIRCRAFT, STRATOLIFTER C/KC

Solicitation # SPE4A726R0746_Synopsis

This indefinite quantity contract issued by DLA Aviation is for the procurement of fuel control servovalves under NSN 2835-01-152-6306. The components are manufactured by RTX Corporation under part number 161403-3 and Woodward, Inc under part number 100312-003. The solicitation is an unrestricted procurement with a base period of five years and no additional options. The estimated annual requirement is 40 units, with a delivery timeline of 264 days after the order date. Inspection and acceptance will occur at the origin, while the FOB is at the destination. The procurement process may include a reverse auction via the Procurex system, and the full solicitation will be available through the DLA Internet Bid Board System on or about August 28, 2026. This effort falls under NAICS code 333611 and supports aircraft such as the Stratolifter C/KC.

POSTED

DEADLINE

Sole Source OEM Schottel Inc. Hydraulic Clutch

Solicitation # N0040626Q0475

Solicitation N0040626Q0475 is a request for quotation for one Schottel Hydraulic Clutch, part number 1150901. This is a noncompetitive, sole-source acquisition intended for the Original Equipment Manufacturer, Schottel Inc., as the item must be compatible in form, fit, and function. The government will award a firm fixed price purchase order to a responsible offeror based on best value, considering price, delivery, and technical acceptability. Interested vendors must be registered in the System for Award Management and submit quotes in Word, Excel, or PDF format to LCDR Ryan Storrusten by 0900 PDT on August 19, 2026. Quotes must include the official company name, cage code, point of contact, and shipping costs, as the shipping terms are FOB Destination. All quotes must remain valid for at least sixty days.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

ELEX UNIT, CONTROL

Solicitation # SPRRA226R0087

The Defense Logistics Agency at Redstone Arsenal, Alabama, is conducting market research to identify potential suppliers for the Electronic Unit Control, NSN 2835-01-483-2227, Part Number 13330591, intended for use with the M-E8 weapon system. This effort is under Revolutionary Federal Acquisition Regulation Overhaul FAR 6.103-1(b), indicating a sole source procurement due to unique requirements and limited qualified suppliers. The North American Industry Classification System code is 333611 with a size standard of 1,500 employees, and the acquisition is designated as an 8(a) Sole Source set-aside. The government is encouraging participation from 8(a), small business, small disadvantaged business, Service-Disabled Veteran-Owned, HUBZone, and Women-Owned small business concerns, but all respondents must meet prequalification requirements and be registered as potential sources through the AvMC public website. Contractors are responsible for all manufacturing, supply chain, logistics, long-lead part procurement, obsolescence management, and related engineering services without any government funding for response preparation. Export-controlled technical data associated with this item is subject to strict compliance with the Arms Export Control Act and the Export Administration Act, requiring active United States/Canada Joint Certification Program certification for both the offeror and all supply chain sources. No award is guaranteed, and this announcement does not constitute a solicitation, promise of future procurement, or financial obligation by the government. Responses are voluntary, and failure to maintain current export certifications will result in immediate disqualification without delay or exception.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

in about 1 month

F-16 ENGINE,GAS TURBINE NSN 2835014385698RP

Solicitation # SPRHA1-26-Q-0750

The Department of Defense, through the DLA Aviation office at Hill Air Force Base, is soliciting bids for the procurement of one F-16 gas turbine engine under solicitation number SPRHA1-26-Q-0750. This requirement is categorized under NAICS code 333611 and is open to all qualified bidders as no specific set-aside has been applied to this acquisition. The solicitation was posted on August 13, 2026, and interested parties must submit their responses by the deadline of September 15, 2026. Primary coordination for this procurement is managed by Ben Shoop.

Ut DLA Aviation At Ogden

POSTED

DEADLINE

in about 1 month

Precision Machined Pump Rotor ManufacturingThe Department of Defense, through the Maritime Supply Chain, is seeking a subcontractor for the precision machining and manufacture of a pump rotor. The components must adhere to strict military specifications and meet mercury-free requirements to ensure compliance with safety and performance standards. This procurement opportunity is categorized under NAICS code 333611 and specifies the place of performance in Tracy, California. Interested parties must submit their responses by August 24, 2026, following the posting date of August 12, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4661 7 Cons Cd

Same awarding agency

Technical Documentation, Training, and Manuals DevelopmentThis subcontract opportunity with the Department of Defense involves the development of comprehensive technical documentation and the delivery of operator training for the mobile breathing air recharging system at Dyess AFB. The selected provider will be responsible for creating user manuals, maintenance guides, and safety procedures to ensure personnel are properly equipped to operate and maintain the system. The project is designated as a total Small Business Set Aside under NAICS code 541618. Interested parties must submit their responses by August 24, 2026, following the posting date of August 14, 2026. Performance of these services will take place at Dyess AFB in Texas.

Other Management Consulting Services

POSTED

DEADLINE

Electrical and Control Systems IntegrationThe Electrical and Control Systems Integration subcontract, issued by the Department of Defense under agency FA4661 7 Cons Cd, focuses on the installation and integration of critical electrical systems for mobile compressors. The scope of work includes the implementation of engine start mechanisms, gauges, alarms, power distribution, and safety controls to ensure reliable operation in mobile environments. This opportunity is designated as a total Small Business Set Aside under NAICS code 238210. Performance will take place at Dyess AFB in zip code 79607. The solicitation was posted on August 14, 2026, with a response deadline set for August 24, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Custom Trailer Fabrication and DOT-Compliant Chassis SupplyThis subcontract opportunity with the Department of Defense involves the fabrication and supply of a DOT-compliant trailer chassis designed to house high-pressure compressors, tanks, and filtration systems. The contractor must ensure the chassis features proper weight distribution, lighting, braking, and essential safety components to meet regulatory standards. Performance of this contract will take place at Dyess AFB in zip code 79607. The project is designated as a Total Small Business Set Aside under NAICS code 336212. Interested parties must submit their responses by August 24, 2026, following the posting date of August 14, 2026. This procurement is managed by the FA4661 7 Cons Cd agency office.

Truck Trailer Manufacturing

POSTED

DEADLINE

Mobile High-Pressure Air Compressor System IntegrationThe Department of Defense, specifically FA4661 7 Cons Cd, is seeking a subcontractor for the Mobile High-Pressure Air Compressor System Integration project. This contract involves the design, assembly, and integration of a mobile, self-contained high-pressure air recharging system specifically for firefighter SCBA cylinder refills. The system must be trailer-mounted and include essential filtration, monitoring, and safety controls. This opportunity is designated as a Total Small Business Set Aside under NAICS code 333912. The place of performance is located at Dyess AFB in zip code 79607. Interested parties must submit their responses by the deadline of August 24, 2026.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

Mobile Breathing System

Solicitation # FA466126Q0092

The 7th Contracting Squadron at Dyess Air Force Base in Texas is seeking a Mobile Breathing Air Recharging System to resupply breathing air bottles for firefighters during complex emergencies. The required air compressor must adhere to the specific salient characteristics outlined in the solicitation documentation. This opportunity, identified by solicitation number FA466126Q0092, is designated as a total Small Business Set Aside under NAICS code 333912. Interested parties must submit their responses by August 24, 2026. The contract is managed by the Department of Defense, with primary coordination handled by Jeury Virgen Carrillo.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

Combined F-84F RB-66B Repaint - Solicitation - 001

Solicitation # FA466126Q0079

Solicitation FA466126Q0079 is a Small Business Set Aside for a Firm-Fixed Price contract to provide combined paint services for F-84F Thunderstreak and RB-66B Destroyer aircraft at Dyess Air Force Base, Texas. The scope of work includes comprehensive surface preparation, corrosion control, painting, finishing, and the application of markings, colors, and insignia according to Federal Standard 595 and T.O. 1-1-4. The contractor is responsible for providing all management, personnel, equipment, and materials, with a mandatory performance period of 90 days after receipt of the order. Key deliverables include a chemical inventory list, weekly on-site inspection reports, monthly spray paint usage spreadsheets, and a two-year warranty on coatings. The government will award the contract based on best value, utilizing a trade-off approach that evaluates price, period of performance, and technical acceptability. Technical evaluations will focus on surface preparation, painting techniques, corrosion control, quality control, and site management. Offerors must submit signed and dated quotes via email to the designated points of contact by August 21, 2026, at 15:00 CDT. Submissions must include a signed Page 2 of the RFQ and a detailed technical approach. Special requirements include strict adherence to background checks for base access, compliance with hazardous waste regulations under 40 CFR Part 261, and a prohibition on employing government personnel that creates a conflict of interest.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Solicitation # FA466126Q0073

Solicitation FA466126Q0073 is a combined synopsis and request for quote for a Firm-Fixed Price contract to procure brand-name Snap-on professional-grade mechanic tool kits for Aerospace Ground Equipment maintenance at Dyess AFB, Texas. This acquisition is a total Small Business Set-Aside and is critical for maintaining operational readiness and flight safety. The requirement consists of two line items, with 13 kits for CLIN 0001 and 4 kits for CLIN 0002. All tools must be constructed from industrial-grade alloy steel and are subject to strict Air Force tool control and Foreign Object Debris standards, requiring laser-etched unique identifiers and custom-cut, multi-layered black and yellow foam inserts for visual accountability. The procurement is conducted under FAR Part 12 procedures for commercial items. Deliveries are specified as FOB Destination to Dyess AFB, with a required delivery timeline of 30 calendar days after contract award. Invoicing and receiving reports must be processed electronically via Wide Area Workflow. The deadline for questions is August 11, 2026, and the final deadline for the receipt of offers is August 17, 2026, at 10:00 a.m. CDT. Submissions must be emailed to the designated points of contact and include signed RFQ pages along with technical documentation regarding salient characteristics and tool lists.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

Supply of Professional-Grade Mechanic’s Tool Kits (Snap-on KRA5311FPBO Model)The contract calls for the procurement and delivery of four units of the Snap-on KRA5311FPBO professional-grade mechanic’s tool kits, each identical in specification to CLIN 0001. These kits include heavy-duty steel chests with foam inserts, a comprehensive array of both SAE and metric hand tools, and laser etching for permanent component traceability. The tools are designed for heavy-duty use in military maintenance environments and must meet exacting standards for durability, precision, and reliability. Delivery is required at Dyess Air Force Base with a zip code of 79607, and the contract is structured as a small business set-aside under the SBA program, ensuring only qualified small businesses may bid. The solicitation was posted on August 7, 2026, with responses due by 3:00 PM on August 17, 2026, and falls under NAICS code 332216 for hand and edge tool manufacturing. The awarding agency is the Department of Defense through the office designation FA4661 7 Cons Cd, and the contract is classified as a subcontract. No point of contact information is listed, and the procurement is part of a broader effort to standardize and replenish professional tooling inventory at a key U.S. Air Force installation. All delivered units must be fully compliant with the specified build, including all components and labeling, to ensure interoperability and accountability in field operations.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

Supply of Professional-Grade Mechanic’s Tool Kits (Snap-on KRA4107FPZR Model)The contract awards the procurement and delivery of 13 professional-grade mechanic’s tool kits, specifically the Snap-on KRA4107FPZR model, to a qualified small business under a Small Business Set Aside. Each kit includes a durable steel tool chest, custom foam inserts designed for precise tool organization, a complete set of SAE and Metric hand tools, and laser-etched markings on all tools for improved traceability and inventory management. The tools are intended for high-demand usage in a military maintenance environment, ensuring durability, precision, and long-term reliability. Delivery is required at Dyess Air Force Base with a ZIP code of 79607, and the contract falls under NAICS code 332216, which covers tool and die manufacturing. The solicitation was posted on August 7, 2026, with a response deadline of August 17, 2026, at 3:00 PM. The contracting activity is under the Department of Defense, identified by the agency designation FA4661 7 Cons Cd, indicating a direct need for mission-critical equipment within a defense operations context. The subcontract nature of the award implies that the successful bidder may either be a primary vendor or a subcontractor supplying to a prime contractor managing the broader logistics chain for the installation.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

Ready-Mix Concrete SupplyThe contract is for the supply of ready-mix concrete to construction sites at Dyess Air Force Base with a zip code of 79607, requiring strict adherence to precise mix designs and scheduled delivery timelines to support ongoing construction efforts. This is a subcontract designated as a Small Business Set Aside under NAICS code 327320, meaning only small businesses are eligible to bid, and the award will be made without competition from larger entities. The opportunity was posted on August 4, 2026, with a response deadline of August 21, 2026, and is managed by the Department of Defense under the agency designation FA4661 7 Cons Cd. All concrete deliveries must meet the technical and timing requirements specified for the site to ensure construction progress is not disrupted, and the winning contractor will be obligated to fulfill quality, safety, and logistical standards expected by the federal government.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

Trucking and Material HaulingThe contract titled Trucking and Material Hauling is a subcontract under a Small Business Set Aside designation, specifically reserved for small businesses, and is classified under NAICS code 484220 for trucking and freight transportation services. It requires the transportation of construction materials, equipment, and waste to and from project sites located at Dyess Air Force Base with a zip code of 79607. The solicitation was posted on August 4, 2026, and responses must be submitted by August 21, 2026, at 8:00 PM. The contracting entity is the Department of Defense through the FA4661 7 Cons Cd office, and performance is exclusively tied to the Dyess AFB location. This opportunity is part of a federal acquisition initiative focused on supporting small business participation in defense-related logistics.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

IT and Software Development ServicesThe contract titled IT and Software Development Services is a small business set aside under the SBA program, reserved exclusively for qualified small businesses to design, develop, and integrate custom software solutions for government systems. It is classified under NAICS code 541511 for computer systems design and related services, and is issued by the Department of Defense under the agency designation FA4661 7 Cons Cd. The place of performance is designated as Dyess Air Force Base with ZIP code 79607, indicating that work must be carried out at or in support of this military installation. The solicitation was posted on August 4, 2026, with a mandatory response deadline of August 21, 2026, at 8:00 PM Eastern Time, leaving a narrow window for submissions. The contract type is a subcontract, which implies it may be part of a larger prime contract structure, requiring potential bidders to coordinate with or be engaged under a primary contractor. All proposals must meet the stringent requirements for small business eligibility and demonstrate technical capability in delivering secure, mission-critical software tailored to defense operations.

Custom Computer Programming Services

POSTED

DEADLINE