Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BRIDLE, PARACHUTE

Active
SPE4A7-26-T-588YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 25 units of a bridle assembly for a drag parachute, identified by NSN 1670-00-629-8412, under solicitation SPE4A7-26-T-588Y, with a response deadline of July 29, 2026, and delivery required within 431 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. The item is subject to stringent cybersecurity compliance, requiring CMMC Level 2 certification by a third-party assessment organization, and must adhere to DLA packaging standards and tailored higher-level contract quality requirements. Inspection and acceptance must occur at the manufacturer’s facility, and non-accepted items must have all government identification removed. Physical identification of the bare item must be marked in accordance with specified standards. Technical data associated with the item is controlled under ITAR or EAR regulations, prohibiting export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, including U.S. subsidiaries and foreign national employees; access is restricted to contractors with approved US/Canada Joint Certification Program status, completed training, and formal DLA authorization. Performance is to be delivered to Tinker AFB, Oklahoma, with the primary point of contact being Ashley Brown of the Department of Defense.

General Info

Procure 25 bridle assemblies, NSN 1670-00-629-8412, CMMC Level 2 required, ITAR/EAR controlled, delivery to Tinker AFB by 431 days post-award.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

314999 - All Other Miscellaneous Textile Product MillsView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-588Y.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Ashley Brown
contact@example.gov

Full Description

Show more
BRIDLE,PARACHUTE
BRIDLE ASSEMBLY, DRAG PARACHUTE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1670-00-629-8412 Quantity: 25 EA Purchase Request: 7017572143QTY: 25 Delivery: 431 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 314999
New
DIBBS
COLLAR, REAR, DRUMThe contract is for the procurement of three collar, rear, drum units with NSN 4210-01-258-2751 under solicitation SPE8E6-26-T-3800, issued by the DLA District San Joaquin on behalf of the Department of Defense. Delivery is required within 167 days from the contract award, with shipment to be made FOB origin and acceptance occurring at the destination. The vendor must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applicable. Packaging must use fabric bags conforming to MIL-B-117 specifications and follow DLA packaging requirements, ensuring proper containment and labeling. The delivery address is DLA Distribution San Joaquin in Tracy, California, with a required ship date of January 18, 2027, and an original delivery deadline of December 11, 2026. No variance in quantity is permitted. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware except in specific allowable applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and authorized chemical reagents, as defined by NAVSEA. Portable devices containing mercury must include a secondary containment boundary and be shock-proof per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Transportation and shipping must comply with DLA Procurement Notes C19 and C20, and all hazardous materials handling follows IP025 guidelines. The point of contact for inquiries is John Lieb, and the solicitation response deadline was August 3, 2026.
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
BLANKET, FIREThis contract pertains to the procurement of fire blankets under the NSN 4210-01-661-3453 and part number 2200162-15005, with a total quantity of 18 units at a unit price of $18.00, resulting in a total contract value of $324.00. Delivery is required FOB origin within 167 days, with inspection and acceptance points set at the destination. The packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, including specific packaging codes and methods for preservation, wrapping, and containerization as detailed in the DLA packaging requirements. Palletization must follow RP001 standards, and no special marking is required. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with the required ship date set for January 18, 2027, though the original delivery deadline was December 13, 2026. The contract enforces a zero variance on quantity and includes references to technical and quality requirements mandated by the DLA Master List, which governs compliance based on solicitation or award date depending on acquisition size. Transportation logistics are governed by DLAD Proc Notes C19 and C20. The solicitation, identified as SPE8E6-26-T-3811, was issued on July 22, 2026, with responses due by August 3, 2026, and is classified as a Women-Owned Small Business Set-Aside under NAICS code 314999. The contracting activity is managed by the Department of Defense, specifically through the San Diego office, with John Lieb designated as the primary point of contact. All items must be delivered without government identification if not accepted, and covered defense information requirements may apply. The unit of issue is each (EA), and alignment with ANSI X12 standards for unit conversion is required. The contract specifies that the supplier is Newtex Industries, Inc., and compliance with all referenced standards, including preservation, packaging, and marking procedures, is mandatory for acceptance.
SAN DIEGO

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
TESTER, FIRE HOSEThe contract is for the procurement of three units and an additional twelve units of a fire hose tester, totaling fifteen units, identified by NSN 4210-01-257-0850, under solicitation SPE8E6-26-T-3798, which is a total small business set-aside. The tester must be built on a steel platform with a roll cage and casters, featuring 1-1/2 inch minimum diameter threaded FNPT manifolds with one inlet and four independent outlets, each controlled by stainless steel quarter-turn ball valves. It must include a minimum 1 HP, 115-volt, 60 Hz, totally enclosed fan-cooled motor and a twin piston positive displacement pump capable of generating up to 500 PSI to test 600 feet of 6-inch hose, 1,200 feet of 2-1/2-inch hose, or 2,400 feet of 1-1/2-inch hose simultaneously. The unit must be equipped with a 3-wire ground plug, water-tight on/off switch, pressure gauge, and by-pass regulator, and must not contain intentionally added mercury or mercury compounds except in specified exempted components like batteries or instruments, which must be shockproof and contain secondary containment per NAVSEA 5100-003D. All units must comply with DLA packaging requirements, MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and be palletized accordingly with no special marking. Delivery is FOB origin with zero quantity variance, inspection and acceptance occur at the destination, and delivery is due within 58 days. Two separate delivery points are specified: Tracy, California for the first three units due by January 31, 2027, and New Cumberland, Pennsylvania for the next twelve units due by July 23, 2026, with an original required delivery date of November 3, 2026, for both. The contract requires adherence to all referenced DLA technical and quality requirements and transportation instructions per DLAD procedural notes.
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
EXTINGUISHER, FIRE
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
NOZZLE, FIRE EXTINGU
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
Federal
42--BLANKET,FIRE
DLA Troop Support

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
Federal
42--TESTER,FIRE HOSE
DLA Troop Support

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
GEAR, FIRE PROTECTIVEThis contract pertains to the procurement of one unit of fire protective gear identified by NSN 4210-01-718-6904 and part number NAVY2K-M-29 (MD-REG), manufactured by LION APPAREL INC, designated as a Type I (Code W) item with a non-extendable shelf life of 120 months. The gear must comply with all applicable technical and quality requirements referenced in the DLA Master List, including packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129, with special labeling indicating Type I and shelf life. Packaging must meet DLA’s procurement guidelines, with weatherproofing required if destined for overseas or FMS customers, and commercial labels must include the contractor’s name, contract number, NSN, size, fiber content, and laundering instructions. Delivery is required within 20 days FOB destination, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The shipment must be sent via traceable means, explicitly prohibiting parcel post, and must be addressed to USS FT LAUDERDALE (LPD 28), FPO AE 09595, under RDD 777 and referencing contract SPE8E9-26-T-3195. The item is subject to removal of government identification if not accepted and must be marked as bare item per specified requirements. The original required delivery date is July 16, 2026, with the solicitation issued under a federal procurement framework governed by DLA’s unit of issue standards and procurement procedures, including all applicable technical, quality, and logistics directives applicable to Department of Defense acquisitions.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
Protective Housing Unit ManufacturingThe contract specifies the manufacture of two military-grade protective housing units designed to meet Federal Standard No. 313 and comply with hazardous materials labeling regulations under OSHA 29 CFR 1910.1200. These units are intended for use in defense applications where durability, environmental resilience, and strict adherence to safety labeling standards are critical. The work falls under NAICS code 314999 for other fabricated metal product manufacturing and is structured as a subcontract under the Defense Logistics Agency, which operates within the Department of Defense. The contract was posted on July 20, 2026, and performance is expected to occur without a designated city or state, indicating potential flexibility or multiple locations for delivery or assembly. The contract is accessible via the DIBBS system under award number SPE7M226V4425, though no specific point of contact or place of performance details are provided in the available data.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 314999
New
DIBBS
Commercial Manufacturing of Military Name Tape Sets (Desert Pattern)The contract entails the full-cycle manufacturing of military name tape sets in desert pattern, covering every stage from material sourcing to final shipment, with strict adherence to federal compliance standards. All production activities including embroidery, cutting, sealing, and packaging must meet precise military specifications to ensure durability, legibility, and uniformity across all units. The work is performed under a subcontract agreement sourced through the Defense Logistics Agency, a component of the Department of Defense, and falls under the NAICS code 314999 for other textile product mills. The production must be completed and delivered in accordance with federal procurement guidelines, though specific performance locations and point of contact details are not provided. The solicitation was posted July 20, 2026, and is tied to the contract identification SPE1C124DB021 with delivery reference SPE1C126F5277.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 314999
New
DIBBS
Commercial Manufacturing of Military Name Tape Sets (Woodland Pattern)The contract entails the full-cycle manufacturing of military name tape sets in Woodland camouflage pattern, covering all stages from material sourcing to final shipment, with strict adherence to federal compliance standards. This includes specialized embroidery, precision cutting, heat sealing, secure packaging, and timely delivery, ensuring all components meet rigorous military specifications for durability, legibility, and environmental resistance. The work is performed under a subcontract arrangement sourced through the Defense Logistics Agency, a division of the Department of Defense, with the North American Industry Classification System code 314999 indicating it falls under other textile product mills. Production must align with federal procurement mandates, including sourcing eligible materials and maintaining quality control throughout each phase to support readiness and uniformity across military units. The manufacturing process is intended for use by U.S. armed forces, with deliveries governed by contractual timelines and logistical requirements tied to the DLA’s supply chain infrastructure. Though specific performance locations and point of contact details are not provided, the contract is linked directly to the DLA’s award system, indicating formal tracking and accountability under the SPE1C126F5277 delivery order, with posting date set for July 2026 to support future operational needs.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 314999
New
Federal
Solarcore Textile (0.8mm thick polymer aerogel-infused non-woven nomex/kevlar)NASA/NSSC is soliciting capabilities and qualifications for the sole-source procurement of Solarcore Textile, a 0.8mm thick polymer aerogel-infused non-woven material composed of Nomex and Kevlar, to be supplied exclusively by LUKLA, INC. The acquisition is justified under FAR 12.102(a) as LUKLA, INC. is the sole provider of this specialized material, and the Government intends to treat it as a commercial item under FAR Part 12 procedures. The contract will be managed by NASA Shared Services Center with performance located at NASA Glenn Research Center, and the NAICS code assigned is 314999. Interested parties may submit written capabilities and qualifications by 3:00 p.m. Central Standard Time on July 23, 2026, to support the Government’s determination on whether to proceed without competition; oral communications are not accepted. The NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies, and the Center Ombudsman information is accessible via the provided link. Primary point of contact is McKenzie Hanson, Procurement Specialist, at McKenzie.M.Hanson@nasa.gov, with Karen Artis listed as secondary contact.
NASA Shared Services Center

POSTED

2 days ago

DEADLINE

in about 23 hours
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
LINER, ACTUATORThe contract pertains to the procurement of LINER, ACTUATOR with part number 292340, sourced from Linear Motion LLC, and also includes alternate suppliers Ontic Engineering & Manufacturing Inc and Mistequay Group Ltd with part number CA67818-001. The item is designated as a critical application item and is governed by stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which override any other referenced standards. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified, and applies specific verification levels and AQLs for critical, major, and minor attributes. Configuration changes require formal engineering change proposals or variance requests, and all non-accepted supplies must have government identification removed prior to return. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001, and all items must be clearly marked as per RQ017. Delivery is FOB origin, with inspection and acceptance occurring at destination after a 170-day delivery window, and the quantity is fixed at 14 units with no variance permitted. The unit price is $14.00, totaling $196.00, and the NSN is 1680-00-492-0817. The required delivery date is September 22, 2027, with a need ship date of January 17, 2027. All shipments must be routed to DLA Distribution Depot Hill at Hill AFB, Utah, following DLAD procedural notes C19 and C20 for transportation and first destination logistics.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
GROMMET, NONMETALLICThe contract is for the procurement of 2 nonmetallic grommets with NSN 5325-01-481-1737 and part number 863-000613, issued under solicitation SPE4A7-26-T-590K by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 20 days of award, FOB origin, with no quantity variance permitted, and inspection and acceptance will occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with precedence given to the DLA Master List of Technical and Quality Requirements over ASTM standards. The unit of issue is each, with a fixed price of $2.00 per unit, totaling $4.00. Packaging must follow RP001 DLA packaging requirements and be palletized accordingly. Shipments must be sent via traceable freight, explicitly prohibiting parcel post, and delivered to the specified military logistics address at March ARB, CA. The required delivery date is July 16, 2026, and the contract references applicable technical and quality standards identified by R or I numbers from the DLA Master List. The responsible point of contact is Naron Sanderlin, with additional government-use codes and identifiers provided for tracking and disposition.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL BOARDThe contract specifies the procurement of a Terminal Board with NSN 5940-01-428-2634 and part number CC-1032-12 from Cornell-Carr Co., Inc., requiring one unit to be delivered within 20 days FOB destination. All supplies must comply with DLA packaging requirements per RP001 and marking standards per MIL-STD-129, with no special marking required and packaging in accordance with MIL-STD-2073-1E using preservation method 10 and unit container D3. The item is designated as a critical application item, and zero tolerance for quantity variance applies. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with acceptance criteria of zero non-conformances, unless otherwise specified; critical, major, and minor attributes are to be assigned verification levels VII, IV, II or AQLs of 0.1, 1.0, and 4.0 respectively. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable devices containing mercury requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Delivery is to be shipped via the fastest traceable means, not parcel post, to the FPO AE 09576 address, with shipping details tied to RDD 777 and project code HJ5 TP 2. The contract incorporates technical and quality requirements from the DLA Master List via RP001, RA001, RC001, RQ011, and RQ017, and applies to simplified acquisition procedures with the revision in effect on the solicitation issue date governing compliance. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, under contract number SPE4A7-26-T-590J, and the original required delivery date is July 16, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThe contract is for the procurement of 63 units of a spacer sleeve identified by NSN 5365-00-061-8248 and part number NAS43HT6-24, manufactured in accordance with NAS43 Revision 12 dated 11/30/2012. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951. Inspection and acceptance are to occur at origin, with sampling conducted under MIL-STD-1916 or an equivalent zero-based sampling plan, and zero non-conformances required unless otherwise specified. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and unspecified attributes are treated as major. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements RP001, with palletization following those same standards. The item is designated as a critical application item and must be marked and labeled per RQ017. Delivery is FOB origin with no variance permitted in quantity, and the required delivery date is 107 days from contract award, with an original deadline of February 17, 2027 and a needed ship date of November 15, 2026. The delivery address is DLA Distribution Jacksonville, and all transportation instructions must follow DLAD Proc Notes C19 and C20. The contract number is SPE4A7-26-T-590S, issued as a federal solicitation under NAICS code 332510, with procurement initiated through Purchase Request 7016845196.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TERMINAL JUNCTION BThis contract pertains to the procurement of a commercial off the shelf item identified by NSN 5940011855550 and part number 592840-1 from TE Connectivity Corporation, with a requirement for 159 units to be delivered FOB origin within 37 days of award. The delivery point is Jacksonville, Florida, with inspection and acceptance occurring at destination, and no tolerance is permitted for quantity variance. Packaging must comply with ASTM D3951 and all applicable DLA Master List of Technical and Quality Requirements, which take precedence, including mandatory adherence to MIL-STD-129 for marking and labeling. Palletization must follow RP001 guidelines, and the unit of issue is each, with packaging and quantity per unit pack strictly as specified. The item is marked as a critical application item, requiring adherence to documentation standards for source approval. The contract reference is SPE4A7-26-T-590V, issued under a federal solicitation with a response deadline of July 30, 2026, and the original delivery requirement was July 9, 2026, with a needed ship date of September 6, 2026. Transportation and freight details are governed by DLAD procedural notes C19 and C20, with the delivery address specified for DLA Distribution Jacksonville, and primary point of contact is Lexus Henry, reachable via provided phone and email.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADED
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
SPLICE, CONDUCTORThe contract is for the procurement of 969 units of SPLICE, CONDUCTOR with NSN 5940-00-177-2604 under solicitation SPE4A7-26-T-590P, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 135 days of award, and responses must be submitted by July 30, 2026. The item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, including CMMC Level 2 certification for the offering organization as a certified third-party assessment organization. Physical identification and bare item marking standards apply, and government identification must be removed from non-accepted supplies. The contract incorporates tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, with inspection and acceptance permitted at the origin. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Department of Commerce, and DFARS 252.225-7048 governs compliance. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal approval from DLA. Packaging must adhere to DLA standards, and all performance is designated to occur at Hill AFB, Utah.
Current-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SPACER, REACTION, IGNThe contract pertains to the procurement of two SPACER, REACTION, IGN units under NSN 5365-01-230-3095, with a delivery requirement of 20 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is subject to export controls under ITAR or EAR, restricting the dissemination of associated technical data to unauthorized foreign persons or entities regardless of location, and requires compliance with DFARS 252.225-7048. Only contractors with approved JCP certification, completed DOD export control training, and DLA authorization may access this controlled data. Additional quality controls include tailored higher-level requirements, inspection and acceptance at origin, and mandatory removal of government identification from non-accepted supplies. Packaging must adhere to DLA standards, and covered defense information applies to this contract. The solicitation number is SPE4A7-26-T-590E, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, with responses due by July 30, 2026. Primary point of contact is Christian Roberson, reachable via email and phone provided.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BLANKET, SOUND CONTRThe contract is for one unit of a sound-controlling blanket designated for aircraft use, with the NSN/Part Number 1680-01-115-7104, under purchase request 7017589386, with delivery required within five days after delivery order. The item includes technical data subject to export control under either the International Traffic in Arms Regulations or the Export Administration Regulations, meaning any disclosure or transfer to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and access is restricted strictly to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on proper handling of DOD export-controlled technical data, and have passed the DLA Export-Controlled Technical Data Questionnaire. Distribution of the technical data is further limited to those approved by the DLA controlling authority. The solicitation number is SPE4A7-26-T-590N, posted on July 22, 2026, with responses due by July 30, 2026, under NAICS code 336413, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with the place of performance listed as New Cumberland, PA, 17070. The primary point of contact is Nya Currie, reachable by phone and email provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FILTER STANDBY CART
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
PARTS KIT, SEAL REPLThe contract pertains to the procurement of a Parts Kit, Seal Replacement with NSN 1680-01-524-8743, issued under solicitation SPE4A7-26-Q-0861 by the Department of Defense through the Defense Logistics Agency. Two quantities are specified: 14 units required for delivery by November 8, 2026, and an additional 50 units required by December 17, 2026, both subject to a firm fixed price with zero variance allowed in quantity. Delivery is FOB origin with a lead time of 194 days from award, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and be labeled and marked per MIL-STD-129, with palletization strictly following DLA Packaging Requirements RP001, where DLA’s Master List of Technical and Quality Requirements overrides all other standards. Sampling for quality assurance must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances accepted unless otherwise directed, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The supplier is Aviation Devices & Electronic Components LLC dba AVDEC, and all technical and quality specifications referenced by R or I numbers are controlled by the DLA Master List in effect on the solicitation issue date. The designated shipping and parcel post address is located at Tracy, California, and transportation instructions must follow DLAD Proc Notes C19 and C20.

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELE
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details