Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BRUSH, PAINT

Active
SPE8E7-26-T-3671Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as SPE8E7-26-T-3671, is a solicitation for the procurement of 907 boxes of one inch poly-paint brushes, specifically part number 1 under Jen Mfg., Inc. and NSN 8020011291143. The order specifies a unit of issue of 48 brushes per box. Delivery is required within 118 days, with a need ship date of August 14, 2026, and an original required delivery date of October 7, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951, though DLA master list requirements take precedence. The shipment is designated for FOB Origin and will be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination.

General Info

Procurement of 907 boxes of poly-paint brushes for delivery by October 7, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

339994 - Broom, Brush, and Mop ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE8E7-26-T-3671 RFQ

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUSA
Contacts
Kelly Mitchell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRUSH,PAINT
BRUSH,PAINT
UI=BX; BX=48EA
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
JEN MFG., INC. 49AB6 P/N 1 IN. POLY-BRUSH
IAW REFERENCE
REVISION NR DTD
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014175958 0001 BX 907.000
NSN/MATERIAL:8020011291143
DELIVERY (IN DAYS):0118
DELIVER FOB: ORIGIN
SPE8E7-26-T-3671
SECTION B
PR: 7014175958 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:08/14/2026 Original Required Delivery Date:10/07/2026
SPE8E7-26-T-3671 NSN/Part Number: 8020-01-129-1143 Quantity: 907 BX Purchase Request: 7014175958QTY: 907 Delivery: 118 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339994
New
DIBBS
BUCKLE
Solicitation # SPE7L1-26-T-02N8
The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7L1-26-T-02N8 for the procurement of 18 buckles. The items are identified by NSN/Part Number 5340-01-664-6083 and are associated with purchase request 7017234867. This federal solicitation was posted on August 25, 2026, with a response deadline set for September 8, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339994
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M0-26-T-059H
The Defense Logistics Agency, under the Department of Defense, has issued a federal solicitation for a single cartridge fuse identified by NSN 5920-01-713-9296. This procurement effort is tracked under purchase request 7017799979 and solicitation number SPE7M0-26-T-059H. The solicitation was posted on August 25, 2026, with a response deadline set for September 8, 2026. Interested parties can find further details and submit responses through the DIBBS portal.
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339994
New
DIBBS
COL LAR, PIN-RIVET
Solicitation # SPE4A6-26-T-21JM
The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for the procurement of COL LAR, PIN-RIVET, identified by NSN/Part Number 5320-00-004-4035. This federal procurement request, numbered 7015252026, seeks to acquire a total quantity of 5,868 units. The solicitation is officially tracked under number SPE4A6-26-T-21JM and was posted on August 23, 2026. Interested parties must submit their responses by the established deadline of August 28, 2026, at 17:00:00 UTC. This solicitation is managed through the Defense Logistics Agency's procurement systems to support departmental requirements. Detailed information regarding the submission process and specific requirements can be accessed through the official DIBBS portal.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 339994
New
DIBBS
BRUSH, CLEANING, BRON
Solicitation # SPE2DS-26-T-361V
This federal solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of a single cleaning brush, identified by NSN 6515-01-462-0643. The procurement is tracked under purchase request 7017974741 and solicitation number SPE2DS-26-T-361V. This requirement is categorized as a federal solicitation intended to fulfill specific logistical needs within the defense supply chain. Interested parties must adhere to the established timeline, as the solicitation was posted on August 23, 2026, with a response deadline set for August 31, 2026. Potential vendors can access further details and submit documentation through the official DLA Internet Bid Board System. No specific set-aside designations or NAICS codes are listed in the current contract data, indicating a standard solicitation process for this specialized cleaning component.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 339994
New
DIBBS
BRUSH, CLEANING, TOOL
Solicitation # SPE8E5-26-T-4055
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of three cleaning tool brushes identified by NSN 7920-12-399-7384. The procurement is categorized as a federal solicitation under the identification number SPE8E5-26-T-4055. The solicitation was posted on August 23, 2026, with a formal response deadline established for September 3, 2026. Interested parties must submit their responses through the designated procurement portal to be considered for this requirement.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 339994
New
DIBBS
BRUSH-SPONGE, SURGIC
Solicitation # SPE2DH-26-T-6197
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of a single surgical brush-sponge identified by NSN 6530-01-519-5786. The procurement is categorized under solicitation number SPE2DH-26-T-6197 and is managed as a federal requirement. The solicitation was posted on August 23, 2026, with a response deadline set for August 31, 2026. Interested parties can access further details and submit responses through the official DIBBS procurement portal. No specific set-aside designations or NAICS codes were provided in the initial contract data.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 339994
New
DIBBS
BRUSH, PAINT
Solicitation # SPE8E9-26-T-3531
This contract, solicitation number SPE8E9-26-T-3531, is for the procurement of 2,000 synthetic filament paint brushes, specifically Type II, Grade AA, size 4 (102 mm). The brushes must adhere to technical specifications outlined in CID A-A-3192A and meet strict quality and packaging standards, including MIL-STD-129R for marking and MIL-STD-2073-1E for packaging. Approved manufacturers for these items include Muralo Company, Inc., Spectrum Paint Applicator Corp, and Delaware Paint Company, Ltd. The delivery is scheduled for 106 days after award, with a required need date of December 16, 2026, and an original required delivery date of January 15, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland Facility in Pennsylvania. Inspection and acceptance will both occur at the destination. The contract is managed by the Department of Defense under the Construction and Equipment MRO Service I agency, and technical requirements are governed by the DLA Master List of Technical and Quality Requirements.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 339994
DIBBS
CASTER, SWIVEL
Solicitation # SPE7M1-26-Q-1378
This contract is for the procurement of 11 swivel casters, identified as commercial off the shelf items with part number 916-AL-1 from Columbus Jack Corporation. The agreement is established as a firm fixed price contract with a delivery timeline of 346 days after order. The items are designated as critical application items and must be delivered to DLA Distribution San Joaquin in Tracy, California. The supplier must adhere to strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, and comply with DLA packaging requirements for procurement. A key environmental restriction prohibits the use of Class I ozone depleting chemicals in the manufacturing or delivery of the items. Inspection and acceptance will take place at the destination, with shipping handled as FOB origin.
MARITIME SUPPLY CHAIN

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 339994
DIBBS
CLIP, HEADBAND HELME
Solicitation # SPE1C1-26-Q-0410
Solicitation SPE1C1-26-Q-0410 is a Firm Fixed Price request for the manufacture and delivery of 264 Team Wendy headband helmet clips, part number 80-CAK-BP, under NSN 8470-01-729-3458. The requirement is split across four delivery locations, including Marine Aviation Logistics Squadron 26 in Jacksonville, NC, and the USS George Washington and USS George H.W. Bush. Delivery is required within 100 days after order, with inspection and acceptance occurring at the destination. The contractor must adhere to high-level quality standards, specifically ANSI/ISO/ASQ Q9001-2015 or an equivalent, and maintain supply chain traceability documentation. Packaging and marking must comply with MIL-STD-129, MIL-STD-147, and MIL-STD-2073-1E, with palletization following DLA requirement RP001. Administration is handled through the DLA Troop Support C and T Supply Chain, requiring electronic invoicing via the VIM-ASAP and WAWF systems. This is not a small business set-aside, and the solicitation incorporates various FAR and DFARS clauses regarding security prohibitions, cyber incident reporting, and defense priorities.
C AND T SUPPLY CHAIN

POSTED

14 days ago

DEADLINE

in 16 days
View Details
NAICS: 339994
SLED
ENHANCED PATROL RIFLE PACKAGES
Solicitation # FIN-0803
The Town of Plainfield, Connecticut, is soliciting sealed proposals from qualified vendors to supply twenty-five complete Enhanced Patrol Rifle Packages for its Police Department, with each package containing a Colt Enhanced Patrol Rifle II PRO with an 11.5-inch barrel, an Aimpoint PRO optic, a Magpul MS1 sling, GrovTec sling swivels, a Streamlight ProTac Rail Mount 1 light, a Savior Equipment American Classic Double Rifle Bag, and all necessary mounts, hardware, and batteries. All components must be professionally installed by a certified armorer, fully inspected for safety and function, and delivered in service-ready condition with proper documentation including serial numbers, armorer certifications, and completed National Firearms Act transfer paperwork. Proposals must be submitted in sealed envelopes to the Finance Department at Plainfield Town Hall no later than 12:00 P.M. on August 27, 2026, and will be publicly opened at that time; proposals received after the deadline will be returned unopened and all submitted proposals must remain valid for sixty days following submission. The award will be made using a trade-off methodology, weighing cost competitiveness at 55 percent, contractor experience and qualifications at 25 percent, ability to meet schedule at 10 percent, references and past performance at 5 percent, and completeness of proposal at 5 percent, with no requirement to select the lowest-priced bid. Each rifle package must be packaged in the specified Savior Equipment double bag, clearly labeled as approved by the Plainfield Police Department, and accompanied by a detailed itemized packing list and firearm identification list. All items must be new, unused, factory-original, and delivered to the Plainfield Police Department at 210 Norwich Road for inspection and acceptance, which will occur within ten business days of delivery; delivery does not constitute acceptance, and the contractor retains responsibility for the condition of the equipment until formal acceptance. The Town requires full compliance with MIL-STD-1913 for Picatinny rail mounting, manufacturer specifications, and all federal, state, and local firearms laws, with no substitutions permitted unless authorized in writing. The contractor must be registered with the Connecticut Secretary of the State, hold a valid Federal Firearms License, certify compliance with affirmative action and equal employment requirements, and indemnify the Town against all claims arising from defective products or improper installation. Insurance requirements include $1 million per occurrence commercial general liability, $1 million errors and omissions coverage, and the Town must be named as an additional insured.
DAS Procurement

POSTED

20 days ago

DEADLINE

in 1 day
View Details
NAICS: 339994
DIBBS
Supply of Artist’s Brushes (Commercial Off-the-Shelf Item)The contract entails the procurement and delivery of 5,700 units of artist’s brushes designated by NSN 8020006641375, classified as a commercial off-the-shelf item, to be supplied in full compliance with federal packaging, labeling, and logistics requirements. The shipment will be delivered on an FOB Origin basis, meaning all risk and responsibility transfer to the buyer once the carrier accepts the goods at the point of origin. This procurement is managed under a subcontract by the Defense Logistics Agency on behalf of the Department of Defense, with the North American Industry Classification System code 339994 indicating it falls under Other Miscellaneous Manufacturing. The solicitation was posted on August 5, 2026, and performance is not restricted to a specific geographic location beyond the FOB terms. The contract identifier is SPE8E926V2075 and is accessible through the DIBBS system for official records.
Defense Logistics Agency

POSTED

20 days ago

DEADLINE

N/A
View Details
NAICS: 339994
DIBBS
Commercial Wipe Cloths SupplyThe contract requires the supply and delivery of five boxes of commercial wipe cloths, identified by NSN 6850014872859 and manufacturer part number AC9165, to Luke Air Force Base in Arizona. All items must fully comply with the specified contractual requirements and be delivered no later than August 20, 2026. Shipments must be sent using a traceable express method to ensure accurate monitoring and timely confirmation of delivery. This agreement is classified as a subcontract under the NAICS code 339994, and the contracting authority is the Defense Logistics Agency, operating under the Department of Defense. The solicitation details are tied to the contract reference SPE4AX16D9008 and delivery reference SPE4A726FA9K3, with the posting date listed as August 5, 2026.
Defense Logistics Agency

POSTED

20 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-225R
This solicitation, issued by the Department of Defense DDSP New Cumberland Facility, is for the procurement of 38 safety relief valves under solicitation number SPE7MC-26-T-225R. The valves must be 1/2 x 1/2 size, set at 1100 PSI, and are specifically used on Model VMT-1600 GPD desalinators. The contract is set aside for Women-Owned Small Businesses and requires delivery within 67 days after receipt of order. The supplier must adhere to DLA packaging requirements and specific technical standards, including configuration change management and the removal of government identification from non-accepted supplies. A strict prohibition on the intentional addition of mercury or mercury-containing compounds is enforced per NAVSEA 5100-003D, with limited exceptions for specific functional components. Additionally, the contractor is required to provide one manufacturer's commercial manual covering operation, services, maintenance, and repair.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332919
New
DIBBS
RING, GROOVED
Solicitation # SPE7MC-26-T-225N
This contract is for the procurement of 136 grooved rings used in directional control valves, identified by NSN 4820006239124 and Bosch Rexroth part numbers 006837 and ITEM44. The items are designated as critical application items and must comply with specific technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. A strict prohibition is placed on the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components. The order is managed under purchase request 7005354854 with a delivery timeframe of 100 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination. All items must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 respectively, with a required delivery date of June 28, 2024.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOID
Solicitation # SPE7MC-26-T-225Y
This contract is for the procurement of eight solenoid valves under solicitation SPE7MC-26-T-225Y for the Department of Defense. The items must adhere to NSN 4810-01-127-3016 and comply with specific technical drawings and quality requirements, including the removal of government identification from non-accepted supplies. The delivery is set for 51 days after the order, with the destination and inspection point located at the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to environmental and safety standards, specifically prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except where functionally required by specified systems. Packaging and marking must follow MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract is open for full competition and requires a zero percent quantity variance for the delivery of the eight units.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332912
New
DIBBS
COVER PLATE, VALVE
Solicitation # SPE7MC-26-T-225G
This contract is for the procurement of 78 units of valve cover plates, identified by NSN 4810-01-621-0764. The items are designated as critical application items and must be manufactured according to Technical Data Package Revision A, General 3, based on drawing 16236 RE-016210764. Delivery is required within 27 days after the order, with a need ship date of October 6, 2026, and a final required delivery date of December 18, 2026. The agreement specifies FOB Origin shipping with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements RP001. All shipments are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract also incorporates specific DLA master list technical and quality requirements and mandates the removal of government identification from any non-accepted supplies.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7MC-26-Q-0396
This contract is for the procurement of 143 four-inch ball valves equipped with lever operators, designed for sewage and sea water service. The valves must be manufactured according to specific military specifications, including MIL-S-901 for shock requirements and MIL-DTL-24509B. Because the items require a metal casting process and specific tooling, the contract identifies them as critical application items. Key requirements include strict prohibitions on the use of mercury and class I ozone-depleting chemicals. The contractor is responsible for first article testing and must adhere to DLA packaging and marking standards. Delivery is set for 333 days after order, with inspection and acceptance occurring at the point of origin. Shipping is directed to the DLA Distribution DDSP New Cumberland facility.

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 325998
New
DIBBS
MARKER, IDENTIFICATI
Solicitation # SPE8E6-26-T-4340
This solicitation from the Department of Defense for the DDSP New Cumberland Facility concerns the procurement of seven identification markers under part number 7690-01-565-4671. The contract requires a delivery timeline of 159 days after the order is placed and adheres to specific technical and quality requirements maintained in the DLA Master List. Key compliance mandates include CMMC Level 2 certification for third-party assessment organizations and strict adherence to DLA packaging requirements. The items are subject to a non-extendable shelf life of 24 months and require the removal of government identification from any non-accepted supplies. Furthermore, the contract involves covered defense information and is subject to strict export controls under ITAR or EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-225L
This contract, identified as SPE7MC-26-T-225L, is a solicitation for the procurement of six valve seats, identified by NSN 4820-01-484-1911 and part number 3751815-1 from Sargent Aerospace and Defense, LLC. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is December 6, 2027, with a delivery window of 160 days. The agreement mandates strict adherence to DLA packaging requirements under RP001 and marking standards per MIL-STD-129. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional components as defined by NAVSEA. Inspection and acceptance will take place at the destination, and the contract follows the technical and quality requirements set forth in the DLA Master List.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-225Q
This contract is a solicitation for the procurement of three ball valves, identified by NSN 4820-01-448-7712, for use in Village Marine reverse osmosis water purification units. The items are designated as critical application items and are associated with part number HC-67TSW24P from Scioto Valve & Fitting Co or Swagelok Co. The procurement is a Women-Owned Small Business Set-Aside under NAICS code 332911, with a required delivery date of May 2, 2027, and a delivery window of 160 days. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. It specifically prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exemptions defined by NAVSEA. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-225X
This contract is for the procurement of 24 valve seat seals, identified by NSN 4820008042757 and part number 61347 from Elkhart Brass Manufacturing Company. The order is designated as a critical application item under solicitation SPE7MC-26-T-225X, with delivery required within 78 days. Shipping is FOB Origin, and the final inspection and acceptance will take place at the destination. The supplier must adhere to strict DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129. Additionally, the contract mandates the removal of government identification from non-accepted supplies and prohibits the intentional addition of mercury or mercury-containing compounds, except in specific functional cases approved by NAVSEA. Deliveries are to be sent to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
Expansion Valve Supply (Commercial Off-the-Shelf)This subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the supply of 12 commercial off-the-shelf expansion valves meeting NSN 4820-01-212-2594 specifications. The scope of work encompasses manufacturing, packaging, and labeling in accordance with MIL-STD-129, with delivery terms set as FOB-origin. The contract is a total small business set-aside under NAICS code 332911, with performance located in New Cumberland. All units must be delivered within 164 days of the contract award. The solicitation was posted on August 24, 2026, with a response deadline of September 4, 2026.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
Ball Valve Supply and Compliance PackagingThis subcontract involves the supply of 31 commercial ball valves, identified by NSN 7017776495, for the Department of Defense at the DDSP New Cumberland facility. The contractor must ensure full compliance with all DLA technical specifications, as well as strict adherence to regulatory packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. The procurement falls under NAICS code 332911 and is associated with a response deadline of September 4, 2026. Performance of the contract will take place in New Cumberland, Pennsylvania, with all deliverables meeting the rigorous quality and shipping requirements mandated by the agency.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332211
New
DIBBS
Small Business Subcontracting Opportunity with Accelerated PaymentsThis subcontracting opportunity, posted by the Department of Defense for the DDSP New Cumberland Facility, seeks certified small businesses to supply trepanning tools. The requirement falls under NAICS code 332211 and is located in New Cumberland, Pennsylvania. A key feature of this opportunity is the application of FAR 52.232-40, which allows for accelerated payments from the prime contractor to the subcontractor. Interested parties must submit their responses by the deadline of August 31, 2026.
Cutlery and Flatware (except Precious) Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details