This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on August 16, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Bulk Air Storage with Cylinders : a permanent dive locker is being stood up in Key West, FL. To provide consistent diver's air an air storage installation. Storage will consists of four (4), 5000psi flasks, augmented with two (2) charging panels.

Closed

N6883625QS095Federal

Submission Closed08/20/2025, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333912

New

SLED

SCBA Compressor and Air Purification Equipment SupplierThis subcontract agreement involves the supply of a complete high-pressure breathing air compression and filtration system for fire department projects managed by the Wilcox County Board of Commissioners in Georgia. The scope of work requires the delivery of a four-stage, air-cooled, oil-lubricated compressor from brands such as Arctic, Bauer, or Mako, featuring a capacity of 6,000 PSI and 10 CFM. The equipment must include a Grade E purification system equipped with a carbon monoxide monitor and replaceable cartridges. Interested parties must respond by November 19, 2026, to provide these essential systems to the prime contractors overseeing the project.

Wilcox County Board of Commissioners

POSTED

DEADLINE

Wilcox County Board of Commissioners (SCBA Compressor and fill station RFP)

Solicitation # PE-77234-NONST-2027-000000012

The Wilcox County Board of Commissioners is soliciting proposals for the procurement, delivery, and installation of a complete Self Contained Breathing Apparatus (SCBA) Compressor and Fill Station for the Wilcox County Fire Department. The scope of work requires a four-stage, air-cooled, oil-lubricated compressor from manufacturers such as Arctic, Bauer, or Mako, featuring a minimum operating pressure of 6,000 PSI and a capacity of 10 CFM. The system must include a Grade E breathing air purification system with carbon monoxide monitoring, four ASME/DOT storage cylinders with a priority fill panel, and an enclosed containment fill station meeting current NFPA requirements, including a safety interlock. The selected vendor will be responsible for the full installation, system and leak testing, operational demonstrations, air quality certification, and on-site training for personnel. Proposals must be submitted in a sealed envelope labeled specifically as a sealed bid and delivered to the Commissioner's Office in Abbeville, Georgia, by 2:30 PM on November 19, 2026. Bidders must provide a GSICA Contractor affidavit, drug-free workplace certification, and equal opportunity employer certification, with minority and DBE contractors encouraged to apply. All pricing must be inclusive of shipping and remain valid for four months following the bid opening. Evaluation will be based on technical compliance and product quality, though alternate brands of equal or better quality may be proposed. The award may be issued to a single contractor or split among multiple vendors at the discretion of the Board of Commissioners.

Wilcox County Board of Commissioners

POSTED

DEADLINE

Supply of Compressor Pistons (NSN 4310-12-332-1519)This subcontract involves the manufacture or procurement of two specialized compressor pistons, identified by NSN 4310-12-332-1519, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support Maritime Supply Chain, falling under NAICS code 333912. Strict adherence to technical and regulatory standards is required, including RP001 DLA packaging requirements and C03 supply chain traceability documentation. Additionally, the provider must comply with DFARS 252.225-7059 and 252.225-7966 trade restrictions to ensure all legal and security mandates are met.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hydraulic Pump Supplier (NSN/Supply Code 4320-01-717-5856)This subcontract involves the manufacture or procurement of hydraulic pump model 4320-01-717-5856 to support prime contractors for the Department of Defense under the DLA Weapons Support Maritime Supply Chain ESOC Buys. The selected supplier is responsible for ensuring all units meet strict technical specifications through rigorous quality control and adhering to RP001 and MIL-STD-129 standards for packaging and labeling. To be eligible, the provider must maintain ITAR/EAR compliance and hold certification under the US/Canada Joint Certification Program. The primary deliverable is the physical pump, fully packaged and labeled according to the specified military standards. This opportunity falls under NAICS code 333912, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-0511

Solicitation SPE7M4-27-T-0511, issued by the DLA Weapons Support Fluid Handling Division, seeks quotes for five compressor cylinder heads, identified as NSN 4310010596086 and Curtiss-Wright Electro-Mechanical part number 220462F1. This is designated as a critical application item and must be produced in accordance with TDP Rev A Gen 1. The required delivery date is March 13, 2028, with a need ship date of October 20, 2026. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are governed by RA001, and environmental safety standards include NAVSEA 5100-003D regarding the prohibition of intentionally added mercury. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-0417

Solicitation SPE7M1-27-T-0417 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 10 breather units under NSN 4310-01-735-6148. The contract requires delivery within 156 days after order, with terms set as FOB Origin and inspection and acceptance occurring at the destination. All supplies must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is categorized under NAICS 333912, and quotes must be submitted via the DLA Internet Bid Board System. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, which takes precedence over ASTM D3951. Packaging must comply with MIL-STD-129 and RP001, and the use of Class I ozone-depleting chemicals is strictly prohibited. Additionally, additive manufacturing is not authorized for these supplies unless specifically approved. Administrative requirements include the use of Wide Area Workflow for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and the Buy American Act.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-0273

Solicitation SPE7M1-27-T-0273, issued by the DLA Weapons Support Maritime Supply Chain, is a fixed-price procurement for four compressor pistons, identified by NSN 4310-01-017-0605. This is a restricted source item requiring engineering source approval by the government design control activity and is designated as a critical application item. The required delivery date is October 31, 2027, with a need ship date of December 1, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and prohibits the intentional addition of mercury or mercury-containing compounds. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment requests. Key regulatory clauses include DFARS 252.204-7012 for safeguarding covered defense information and various FAR sections governing changes, subcontracts, and the prohibition of certain internal confidentiality agreements.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1096

Solicitation SPE7M1-27-T-1096 is a federal procurement issued by the Defense Logistics Agency for the supply of three first stage piston rods, identified by NSN 4310010236028 and Curtiss-Wright part number H32728. These components are designated as critical application items used on Ingersoll-Rand Oil Free Compressor Model N30NL-1 HPAC for shipboard use. The required delivery date is March 10, 2027, with a delivery lead time of 130 days. Shipping is established as FOB Origin, with the final destination for inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, and mercury containment must comply with NAVSEA 5100-003D. Key regulatory clauses include the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and representations regarding telecommunications equipment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-U-0024

Solicitation SPE7M1-27-U-0024 is a request for quotations issued by DLA Land and Maritime for the procurement of compressor pistons, identified by NSN 4310016215575. This is a non-small business set-aside for a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and a one-year period of performance. The estimated annual quantity is 11 units, with a minimum delivery order quantity of 5 units. Delivery is required within 93 days after order, with terms set as FOB Origin and inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Compliance with the Berry Amendment and Buy American Act is required, and any use of non-domestic materials must be disclosed. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Award evaluation will be based on the price quoted for the estimated annual demand.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-0353

Solicitation SPE7M1-27-T-0353 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 13 pump gland plates, identified by NSN 4320-01-429-6053 and John Crane part number H-2375-040-7869. This procurement is designated as a total small business set-aside under NAICS code 333912. The required delivery date is October 31, 2027, with a need ship date of May 28, 2027, and a delivery lead time of 220 days after order. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with additional palletization requirements specified in RP001. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Notable restrictions include a prohibition on the intentional use of mercury or mercury-containing compounds and a ban on the use of additive manufacturing for the supplied parts. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors are required to submit quotes via the DIBBS portal and must comply with the Buy American Act and Berry Amendment regulations.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-Q-0076

Solicitation SPE7M1-27-Q-0076 is a firm fixed price request for the procurement of two compressor pistons, identified by NSN 4310-12-332-1519. This is a restricted source item requiring engineering source approval by the government design control activity and is designated as a critical application item. The procurement is managed by the DLA Weapons Support Maritime Supply Chain, with a required ship date of October 31, 2027, and a delivery timeline of 100 days after the order is received. Delivery is FOB origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including MIL-STD-973 for configuration control and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements RP001. Environmental restrictions prohibit the use of class I ozone depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA. Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

43--PISTON,COMPRESSOR

Solicitation # SPE7M1-27-Q-0081

Solicitation SPE7M1-27-Q-0081 is a fixed-price request for quotation issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 30 compressor pistons (NSN 4310-01-248-1571). This requirement is designated as a critical application item and is set aside for small businesses under NAICS code 333912. Approved sources include Siemens Energy, Inc. and Curtiss-Wright Electro-Mechanical Corp, both referencing part number MLH53826G1. The delivery timeline is specified as 100 days after receipt of order, with inspection and acceptance occurring at the destination. The procurement includes strict adherence to military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, alongside compliance with NAVSEA 5100-003D regarding mercury compounds. Award decisions will be based on the best value to the government, evaluating price, offered delivery, and past performance. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates various federal and defense regulations, including safeguarding covered defense information, prohibitions on contracting with certain Chinese military companies, and Buy American Act certifications.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

The contract involves establishing a permanent dive locker at NAS Key West, Florida, for Explosive Ordnance Disposal Group Two (COMEODGRU TWO) and their subordinate units, managed by Explosive Ordnance Disposal Training and Evaluation Unit TWO (EOD TEU 2). The primary purpose is to support diver training and operations by providing a reliable air storage system. The installation includes four 5000psi compressed air flasks, complemented by two charging panels for cascading air to diver’s bottles, and a 6000psi charging hose to ensure consistent and safe diver air supply. The delivery location is specified as NAS Key West, with the designated point of contact being CW02 Joshua Laitila. The solicitation, posted on August 6, 2025, under number N6883625QS095, is a combined procurement with a response deadline of August 18, 2025. The project falls under NAICS code 333912, which pertains to fluid power equipment and hydraulic system manufacturing. The contracting authority is the Department of Defense, specifically through the Navsup Fleet Logistics Center Jacksonville. Interested parties can contact Preston Grant or Ricardo Murillo for further details. The contract aims to enhance operational readiness by ensuring a dedicated, secure, and efficient air supply system for diving activities at the facility.

General Info

Install permanent dive locker with bulk air storage at NAS Key West for EOD TEU 2 training.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Jacksonville

Contract Value

$28,290.61

NAICS

333912 - Air and Gas Compressor Manufacturing

Place of Performance

Key West, FL, 33040, USA

Set-Aside

NONE

Awardee

COMPRESSED AIR SUPPLIES AND EQUIPMENT, INC.

Award Issued Date

08/27/2025, 12:00:00 AM UTC

Documents

Amendment 0001 to Solicitation N6883625QS095

amendment

High

RFQ N6883625QS095 - Bulk Air Stowage

rfq

High

RFQ N6883625QS095 Past Performance Information Form

past-performance

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedJul 25

Sources Sought

Type ChangedAug 6

Sources Sought → Combined Synopsis

Notice updatedAug 16

Response deadline changed from Aug 18, 2025 to Aug 20, 2025. The notice description changed.

Response DeadlineAug 20

Deadline has passed

Submission Closed

08/20/2025, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Jacksonville

Contacts2 people available

OfficeJACKSONVILLE, FL, 32212-0097, USA

Organization / AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Jacksonville

Office AddressJACKSONVILLE, FL, 32212-0097, USA

Contacts

Preston Grant

Ricardo Murillo

Full Description

Explosive Ordnance Disposal Training and Evaluation Unit TWO (EOD TEU 2) is the east coast training center for Explosive Ordnance Disposal group TWO (COMEODGRU TWO) and their subordinate units. In order to better support and train the various units that rely on EOD TEU 2 a permanent dive locker is being stood up in Key West, FL. In order to provide consistent diver's air an air storage installation is required. The storage will consists of four (4), 5000psi flasks, augmented with two (2) charging panels for cascading to diver's bottles and one (1) 6000psi charging hose. See Section 2 and Section 4 of PWS. Actual Delivery is NAS KEY WEST : CW02 JOSHUA LAITILA EODTEU-2 A-931 Midway Avenue NAS Key West, FL 33040 Amended solicitation extending the due date is attached.