Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Bulk Pumping of AFFF-Contaminated Wastewater

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the bulk pumping of 5,000 gallons of AFFF and pFOS-contaminated non-RCRA liquid waste from twenty IBC totes located in Sasebo, Japan, into DOT-compliant tanker trucks for safe transport and disposal. This subcontract, issued under the Department of Defense through the Defense Logistics Agency, is categorized under NAICS code 221112, indicating its alignment with water and wastewater treatment services. The work is geographically restricted to Sasebo and must adhere to all applicable transportation and handling regulations for hazardous non-RCRA waste. The pumping operation requires strict compliance with DOT standards for tanker integrity and labeling to ensure environmental and regulatory safety during transit. The solicitation was posted on July 20, 2026, and the contract reference number is SP450025D0029 with delivery order SP450026F6550.

General Info

Pump 5,000 gallons of AFFF and PFOS waste from IBC totes in Sasebo, Japan, to DOT-compliant tankers for disposal.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

221112 - Fossil Fuel Electric Power GenerationView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Pumping 5,000 gallons of AFFF/pFOS-contaminated non-RCRA liquid waste from 20 IBC totes into DOT-compliant tanker trucks at Sasebo, Japan.

Similar Contracts

Same NAICS industry code

NAICS: 221112
New
Federal
ERCOT 2026The Government is soliciting offers for the supply of retail electricity and ancillary services to Department of Defense and Federal Civilian agency facilities across Texas within the ERCOT market area under solicitation SPE60426R0401, issued as a combined synopsis/solicitation under FAR Part 12. The contract requires delivery of approximately 841.7 million kWh over a 24-month period beginning January 2027 and ending January 2029, with an additional holdover CLIN extending performance through April 2029 to manage market transition burdens. Offers must be submitted as Firm Fixed-Price or Real-Time Settlement Point Pricing (RTSPP) arrangements, with 19 distinct CLINs specifying individual installation requirements, including NASA JSC, AAFES, SPR, and Dyess Air Force Base. RTSPP pricing applies to specific CLINs, while the Government retains the right to convert CLIN 0018 (Dyess AFB) from RTSPP to Firm Fixed-Price for certain periods. The contract mandates that electricity conform to the tariff of the applicable Utility Distribution Company at the point of delivery, defined as an interconnect with its transmission or distribution systems, while the service point is the metered location for each account. All pricing must exclude Transmission/Distribution Service Provider charges, Gross Receipts Tax, and Public Utility Commission Assessment, which are direct pass-throughs with no markup. Proposals must be submitted in accordance with detailed requirements in Attachment II, including three past performance references, and pricing must be submitted via the Pricing Sheet TX2026. Only entities licensed by the Public Utility Commission of Texas may obtain access to password-protected attachments. The evaluation will be based on best value, with price accounting for approximately 50% of the score, and non-price factors—past performance, technical capability/risk, and small business participation—collectively weighted equally to price, with past performance being the most important non-price criterion. The offeror must maintain current SAM registration, provide a Unique Entity Identifier and CAGE code, and comply with representations including the Trade Agreements Certificate, Buy American requirements, and prohibitions on contracting and foreign-owned entities. Invoicing must follow Consolidated REP Billing guidelines, with single invoices per account including PUCT-compliant details and separate line items for transaction fees and retail adders. For CLIN 0004 (NAS Kingsville), payment must be processed through WAWF using the Invoice
DLA Energy

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 221112
New
SLED
Ultra-Low NOx Emission Flare System InstallationThe City of Los Angeles has contracted for the supply, delivery, and installation of a new ultra-low NOx emission flaring system to replace the existing digester gas flare at a facility in Los Angeles, ZIP 90293. The project encompasses the complete overhaul of the flare infrastructure, including the flare stack, ignition system, control panels, and seamless integration with the site’s existing gas piping network. The new system is designed to significantly reduce nitrogen oxide emissions while maintaining reliable operational performance for digester gas disposal, aligning with environmental compliance and air quality standards. All equipment and components must meet stringent technical specifications for emissions control and safety. Work under this subcontract is required to be performed at the designated location in Los Angeles, with full responsibility placed on the contractor for procurement, installation, testing, and commissioning of the entire system. The project is classified under NAICS code 221112 and was posted on July 17, 2026, as part of the City’s ongoing efforts to modernize infrastructure and reduce environmental impact. There is no set-aside designation specified, and the contract does not outline a solicitation number, indicating it may have been awarded directly or through an internal procurement process. The contractor is expected to coordinate with facility personnel to ensure minimal disruption during installation and to provide any necessary documentation or training for ongoing system operation and maintenance.
City of Los Angeles

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 221112
SLED
On-Site Power Generation ServicesThe contract entails the provision and operation of mobile generator sets to deliver reliable power for equipment and operations at remote mining and reclamation sites within San Bernardino County, California, specifically in the 92332 zip code area. The services are classified under NAICS code 221112, indicating a focus on electric power generation, transmission, and distribution, with the contract structured as a subcontract to support infrastructure needs in challenging, off-grid environments. The work requires continuous operational support to maintain power integrity for critical machinery, safety systems, and site logistics during active mining and environmental restoration activities. The contract was posted on June 5, 2026, and is administered by San Bernardino County under the California state framework, though no specific agency organization name or point of contact is provided. The place of performance is designated as a remote location where grid connectivity is unavailable, necessitating self-sustaining, mobile power solutions that can withstand harsh conditions and extended operational cycles. There is no set-aside designation specified, meaning the contract is open to all eligible bidders without preference based on size, ownership, or other classification. The official reference link directs to a public project portal for further details, but no additional procurement terms or performance metrics are included in the provided data.
San Bernardino County

POSTED

about 2 months ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 333992
New
DIBBS
CAP, AIRThis contract, issued by the Defense Logistics Agency under solicitation number SPE8E5-26-T-3638, pertains to the procurement of one unit of material identified by NSN 3433-01-158-0436, with a required delivery within five days of award. The item is to be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including specific hazardous material handling per FED-STD-313 and TQ requirement IP025 if applicable. Mercury and mercury-containing compounds are strictly prohibited except for defined functional uses such as batteries, fluorescent lights, sensors, or reagents approved by NAVSEA, with additional containment requirements for portable devices. The shipment is to be sent to a designated SSA location in Kaiserslautern, Germany, with transportation governed by DLA procedural notes C19 and C20. The contract includes restrictions on covered defense information and mandates compliance with supplier documentation standards including Source Approval Requests and removal of government identification from non-accepted items. The original required delivery date is June 11, 2025, and the point of contact is Ira Hedgepeth at DLA.
Welding and Soldering Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
HEATER, FLUID, INDUSTThis contract is for the procurement of one fluid heater, industrial model, identified by NSN 4420014299920 and part number 5-131-08-030-002 from Fluid Handling LLC, with a total quantity of ten units to be delivered within five days of award. The item is covered under solicitation SPE8E8-26-T-4771, which is a total small business set-aside under NAICS code 332410, and is managed by the Defense Logistics Agency. Delivery is FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all packaging must be marked and labeled appropriately with the specified unit of issue and quantity per unit pack. The contract explicitly prohibits intentional addition of mercury or mercury-containing compounds to the hardware or its components, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and maintain a secondary containment barrier per NAVSEA 5100-003D. Shipment is directed to the U.S. Army SSA W58MKR facility in Zaczernie, Poland, and must follow DLA procedures C19 and C20 for transportation and first destination transfer. The item must be delivered by July 22, 2026, and is associated with RDD code E and project code 3BI TP 1. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. Contract data indicates the primary point of contact is Alexis Selby, with the solicitation posted on July 21, 2026, and responses due by August 3, 2026. The purchase request number 7017559823 references this line item, with unit price and total cost not itemized but implied through total quantity and contractual obligations. Government use identifiers and distribution codes are provided for internal tracking purposes.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326199
New
DIBBS
SPECTACLES, INDUSTRIThis contract requires the delivery of 10 pairs of industrial safety spectacles under NSN 4240-01-701-2897, with a purchase request number 7017543009, to be shipped FOB destination within 20 days of award. The supplier must comply with all applicable DLA Master List of Technical and Quality Requirements, which take precedence over commercial standards like ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements RP001. If the item is hazardous per FED-STD-313, it must be packaged to SPE8E6-26-T-3776 specifications; otherwise, commercial packaging compliant with ASTM D3951 is acceptable, but still subordinate to DLA technical standards. All items must be devoid of government identification if rejected, and demilitarization procedures apply to any Category I munitions-related components, though not relevant to this product. Delivery is to USS ROSS DDG 71 at FPO AE 09586, with transportation governed by DLAD Proc Notes C19 and C20. The contract identifies the unit of issue as each, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The solicitation was issued under SPE8E6-26-T-3776, with a required delivery date of July 22, 2026, and a response deadline of August 3, 2026. The contracting officer is John Lieb of the Defense Logistics Agency, and the item is classified under NAICS code 326199.
All Other Plastics Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332313
New
DIBBS
PLATE, INSTRUCTIONThe contract pertains to the procurement of two instructional plates identified by NSN 9905-01-515-8353 under solicitation SPE8E6-26-Q-0579, with a firm delivery deadline of 90 days after award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed prior to return. Drawings associated with this item are accessible only during the open solicitation period via the DIBBS portal. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless otherwise directed. Compliance with zero defect acceptance is mandatory unless explicitly waived. Technical data associated with this item is subject to export control under ITAR or EAR, and its disclosure to foreign persons, including within the United States, is strictly prohibited without prior authorization. Access to controlled technical data is restricted to contractors with valid US/Canada Joint Certification Program certification, completed DOD export control training, and explicit approval from DLA. The point of contact for the solicitation is Kathleen Selover, reachable via email and phone listed in the contract data.
Plate Work Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATIONThe contract pertains to the procurement of identification markers, specifically for a Type I shelf-life item with a 12-month non-extendable shelf life, under the Defense Logistics Agency’s procurement requirements. The item must be supplied by either LABELMASTER CO. or AMERICAN LABELMARK COMPANY with the respective part numbers PL-18 or HML13, and must comply with MIL-STD-129 for labeling, including shelf-life markings in calendar quarter and year format, with the expiration date set exactly one year from the cure date. At least 85% of the item’s shelf life must remain at the time of delivery. Packaging must conform to MIL-STD-2073-1E, with clear marking specifications and avoidance of plastic materials for wrapping, cushioning, or dunnage whenever feasible. The unit of issue is RO (1,666 feet), with a total quantity of one RO required, and delivery is due within 20 days of contract award, FOB origin. Inspection and acceptance occur at destination, and no variance in quantity is permitted. The item is destined for W8002F, a military facility located in Comayagua, Honduras, and must be shipped via traceable means, with parcel post prohibited. The delivery address, mark for address, and freight shipping address are identical, and the point of contact is Jennifer Roome of the Defense Logistics Agency. The solicitation number is SPE8E6-26-T-3765, with an original required delivery date of July 17, 2026, and responses are due by August 3, 2026. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, and compliance with all applicable codes and standards including MIL-STD-129 is mandatory. The contract includes government use codes, project information, and a National Stock Number of 7690-01-242-4556, with the North American Industry Classification System code 323117 identifying the industry standard for the item.
Books Printing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
TANK, OIL DRAIN, COMPThe contract is for one oil drain tank, part number 366-20263 and NSN 4130-01-230-8549, under solicitation SPE8E8-26-T-4770, issued by the Defense Logistics Agency. Delivery is required within five days of award, with shipment destined for the Carrier Outfitting Material Support Center in Suffolk, Virginia. The item must be furnished FOB origin, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using approved methods and materials, with strict instructions to avoid plastics where possible. The item must not contain intentional mercury or mercury compounds except in specific permitted applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents, and any portable mercury-containing devices must be shock-proof with secondary containment per NAVSEA 5100-003D. The contract references DLA’s Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation or award date. A unique shipment identifier RDD 777 requires tracking via the fastest traceable means and prohibits parcel post. The technical data package is not approved by DLA Troop Support, and no request for it should be submitted. The contract includes specific freight and parcel post addresses, a government-only identification code, and a required delivery date of July 20, 2026, with a response deadline of August 3, 2026.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
BRACKET, LIGHT RETENThe contract specifies the procurement of 40 units of a Light Retention Bracket with NSN 6220-01-631-4413 under solicitation SPE8E7-26-T-3370, issued by the Defense Logistics Agency. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951, and all items must be marked and labeled per MIL-STD-129. If the item is non-hazardous, it must be commercially packaged in accordance with ASTM D3951; if hazardous, it must follow TQ requirement IP025. Palletization must adhere to RP001 DLA Packaging Requirements. The item is to be delivered to the U.S. Army SSA W58MKR in Zaczernie, Poland, with shipment tracked via RDD/ANMCS and governed by DLAD procedural notes C19 and C20. The contract includes a unit price of $40 per unit for a total of $1,600, with an original delivery date of July 21, 2026. An additional line item for the same part, quantity 140 units at $140 each, totals $19,600 with a delivery date of July 22, 2026. All documentation must align with DLA’s electronic procurement portal and ANSI X12 unit of issue guidelines, and government-specific identifiers must be removed from non-accepted supplies. The point of contact is Kelly Mitchell, with a response deadline of August 3, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details