Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Solicitation of the Bulkhead, Aircraft

Active
W58RGZ-26-R-0049Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Government is seeking to award a single-award, firm-fixed-price contract for the procurement of 22 aircraft bulkheads, NSN 1560-01-345-4800, part number 70308-03801-116, intended for use on UH-60 Black Hawk helicopters. Delivery is required at a rate of two units per month, with a total production lead time of 540 days after contract award, and all items must be delivered FOB Destination. The item is classified as non-commercial, so FAR Part 12 does not apply, and it is not designated as an aviation Critical Safety Item. The Government has determined that sufficient technical data to produce the item resides solely with General Electric Company, following Sikorsky Aircraft Corporation’s notification that it will not bid; as such, this procurement is being conducted as a sole-source acquisition. Any potential offeror must demonstrate authorized access to the proprietary data controlled by either Sikorsky or General Electric to be eligible for award. The requirement is unfunded, and award will be contingent upon the appropriation of necessary funds. The solicitation will be issued under FAR Part 15, with all communications and proposal submissions required to be submitted via email to the designated Contract Specialist; no facsimiles or hard copies will be accepted for initial proposals. Only entities holding a current CMMC Level 2 C3PAO certification may submit a Source Approval Request. The solicitation response deadline is July 22, 2026, though the issuance date may alter the timeline, and the closing will not occur before the stated date.

General Info

Sole-source procurement of 22 UH-60 bulkheads via FAR Part 15, CMMC Level 2 required, unfunded, delivery FOB Destination by 2027.

Agency

Department Of Defense → W6QK Acc-RsaView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

AL

Set-Aside

NONE

Documents

(1)

W58RGZ-26-R-0049.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Sources Sought

Type Changed

Sources Sought → Presolicitation

Type Changed

Presolicitation → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Rsa
Contacts2 people available
OfficeREDSTONE ARSENAL, AL, 35898-0000, USA
Organization / Agency
Department Of Defense → W6QK Acc-Rsa
View Agency Profile
Office AddressREDSTONE ARSENAL, AL, 35898-0000, USA
Contacts
Pamela Pritchard
Lindy L. Pinchon

Full Description

Show more

The purpose of this notice is to post the official solicitation for procurement of the Bulkhead, Aircraft, for the UH-60. Please see attachment for further details.

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → W6QK Acc-Rsa

Same awarding agency

NAICS: 336411
New
Federal
FIRE CONTROL RADAR (FCR)
Solicitation # W58RGZ-26-R-0004
The United States Army Contracting Command – Redstone Arsenal is seeking sole-source contractor support for depot-level repair and sustainment of the AH-64 Apache Fire Control Radar, a proprietary system developed by LONGBOW LIMITED LIABILITY COMPANY. Because the government lacks the technical data package for this system, the contract is restricted exclusively to the Original Equipment Manufacturer with Cage Code 04WF2 under the statutory authority of 10 U.S.C. 3204(a)(1), permitting other than full and open competition. The contractor must provide comprehensive sustainment services, including supply chain management, logistics, engineering support, and depot maintenance at the Line Replaceable Module and Line Repairable Unit level for both Legacy and Generation 2 Radio Frequency Interferometer components. This includes managing stock, storage, issuance, retrograde processes, and the necessary test equipment and infrastructure, all while actively collaborating with government engineers to mitigate obsolescence, diminishing manufacturing sources, and associated modifications. The contract is structured as a performance-based hybrid Indefinite Delivery Indefinite Quantity (IDIQ) with Firm Fixed Price and Cost-Plus Fixed Fee task orders over a 60-month period divided into five pricing periods. The acquisition will be conducted by negotiation under RFO 15, with proposals evaluated without discussions, requiring offerors to submit their most favorable terms upfront. This is a presolicitation notice, not a formal solicitation, and no proposals are to be submitted at this time. The official solicitation will be issued electronically via the PIEE Solicitation module, and potential offerors must monitor the site regularly for amendments. Participation requires current registration in the System for Award Management. All correspondence and documentation will be handled electronically, with no hard copies provided. The response deadline is August 14, 2026, and the primary point of contact is Tamesha Jordan, with secondary support from Jessica Mangum.
Aircraft Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 3 months
View Details
NAICS: 333248
New
Federal
AdvM Call for Solutions - Automated Parts Handling for Plating in SOD
Solicitation # PANRSA-26-P-0000-040599
The Army Contracting Command – Redstone Arsenal, on behalf of Tobyhanna Army Depot, is seeking innovative solutions to automate and modernize its plating shop operations through solicitation PANRSA-26-P-0000 040599. The government requires a comprehensive system comprising hardware, automated parts handling equipment, and an open-architecture Commercial-Off-The-Shelf SCADA software platform to manage chemical electroplating and conversion coating across 12 different process lines. The primary objectives are to reduce employee exposure to hazardous chemicals, increase throughput and product quality, and implement digital recipe management and safety alarming systems. The solution must ensure interoperability with existing infrastructure, comply with Class I Division 1 safety standards, and adhere to EPA, DEP, OSHA, and NFPA regulations while producing coatings that meet specific military specifications such as MIL-DTL-5541 and MIL-PRF-8625. This effort is being conducted under Commercial Solutions Opening procedures in accordance with DFARS Subpart 212.70, utilizing a multi-phased evaluation approach. Phase 1 requires the submission of a Solution Brief consisting of a Quad Chart and a White Paper, including a conceptual Rough Order of Magnitude cost estimate. Evaluation criteria for this initial phase focus on technical merit, schedule and integration approach, and company viability, with price not being a factor until Phase 3. If selected, the government anticipates awarding a FAR-based, Firm-Fixed-Price contract. Interested offerors must be registered in the System for Award Management and submit their Phase 1 packages via email by the specified deadline.
All Other Industrial Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 336411
New
Federal
Drone Marketplace Commercial Solutions Opening
Solicitation # W58RGZ26SC001
The Drone Marketplace Commercial Solutions Opening (CSO), solicitation W58RGZ-26-S-C001, is an open-ended initiative issued by the Project Management Office (PMO) Uncrewed Aircraft Systems and Army Contracting Command - Redstone. This solicitation remains open in perpetuity until canceled and aims to accelerate the adoption of advanced commercial technology, transform uncrewed aircraft systems capabilities, and expand the industrial base. The program focuses on a free-market approach to rapidly deliver innovative solutions to the Warfighter across a wide range of areas of interest, including unmanned aircraft and maritime systems, counter-UAS technology, autonomous vehicles, software, and additive manufacturing. Industry partners can respond through two primary methods: Innovative Warfighter Solutions (IWS) and Call for Solutions (C4S). The IWS process allows vendors to submit solution briefs to identified areas of interest through a three-phase evaluation consisting of a solution brief, an optional live pitch or demonstration, and a commercial solution proposal. C4S are specific announcements posted via SAM.gov to address critical capability gaps. Awards may be executed using FAR Part 12 commercial procedures, fixed-price contracts, or non-FAR agreements such as Other Transaction (OT) agreements. To be eligible for award, companies must possess a Unique Entity Identification (UEI) number, maintain active registration in the System for Award Management (SAM), and register in the Wide Area Work Flow (WAWF) invoicing system. Evaluation is based on technical merit, the feasibility of the proposed schedule and rough order of magnitude (ROM), and company viability. It is important to note that the government will not reimburse companies for costs incurred during the initial three phases of the solicitation process. Only a warranted Contracting or Agreements Officer has the authority to contractually bind the government.
Aircraft Manufacturing

POSTED

2 days ago

DEADLINE

in over 4 years
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS