Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 8 at 2:00 PM EDT

Register Free →

Bullet Resistant Flat Sheet Glass BR 4 and BR 6

Active
W912HQ26QA009Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement and installation of ballistic-resistant transparent armor for 2009–2011 Chevrolet Suburban vehicles, requiring all windshield, door window, and rear cargo glass to meet NIJ Level III standards with thicknesses of either 38mm ±5% (BR6) or 21mm ±5% (BR4), depending on the location. All glass must be one-piece laminated construction featuring an anti-spall inner layer and must independently meet or exceed the ballistic protection requirements of NIJ Level III. The exposed polycarbonate surface of each panel must be treated with an abrasion-resistant coating, supported by a Certificate of Compliance. The scope includes on-site removal of existing delaminating windshields and the full installation of two windshields, one driver rear door glass, and two passenger rear door glasses, all adhering to the BR6 specification. The solicitation, issued under number W912HQ26QA009 by the Department of Defense through W4LD USA Hecsa, is a total small business set-aside with a NAICS code of 336992, and responses are due by July 17, 2026. Performance will occur at Summit Point, West Virginia, with primary point of contact Alexander Arnoe in Alexandria, Virginia.

General Info

Procure and install NIJ Level III ballistic glass on 2009–2011 Suburbans, BR6 specification, at Summit Point by July 17, 2026.

Agency

Department Of Defense → W4LD USA HecsaView Agency

NAICS

336992 - Military Armored Vehicle, Tank, and Tank Component Manufacturing View NAICS

Place of Performance

Summit Point, WV, 25446, USA

Set-Aside

SBA

Documents

(2)

RFQ for Ballistic Glass Sheets Delivery Order B08.02

PDFrfq

Solicitation W912HQ26QA009 for Ballistic Rated Flat Sheet Glass

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W4LD USA Hecsa
Contacts2 people available
OfficeALEXANDRIA, VA, 22315-3860, USA
Organization / Agency
Department Of Defense → W4LD USA Hecsa
View Agency Profile
Office AddressALEXANDRIA, VA, 22315-3860, USA

Full Description

Show more


  1. Windshields meeting NIJ Level III (38mm +/-5% and 21mm +/-5%) Suburban 2009-2011 Transparent Armor: Transparent armor shall be of one-piece construction with anti-spall inner layer.  The transparent armor shall be laminated construction and shall have a material alone capability of meeting or exceeding the ballistic protection of NIJ Level III. Exposed Polycarbonate surface shall be treated with an abrasion resistant coating with Certificate of Compliance. 
  2. Door Window Glass (Transparent Armor) shall meet NIJ Level III BR6 (38mm +/-5%) or BR4 (21mm +/-5%) for the applicable Chevrolet Suburban vehicles as detailed within this document.  Transparent armor shall be of one-piece construction with anti-spall inner layer.  The transparent armor shall be laminated construction and shall have a material alone capability of meeting or exceeding the ballistic protection of NIJ Level III. Exposed Polycarbonate surface shall be treated with an abrasion resistant coating with Certificate of Compliance. 
  3. Rear Cargo Glass BR6 (38mm +/-5%) Suburban 2009-2011 for the applicable Chevrolet Suburban vehicles as detailed within this document.  Transparent armor shall be of one-piece construction with anti-spall inner layer.  The transparent armor shall be laminated construction and shall have a material alone capability of meeting or exceeding the ballistic protection of NIJ Level III. Exposed Polycarbonate surface shall be treated with an abrasion resistant coating with Certificate of Compliance. 


  1. On-site removal of existing failing (Delaminating) Windshields and the installation of the two (2) Vehicle Windshields as well as the required vehicles door glass.

Procurement of 2 each Windshields meeting NIJ Level III (38mm +/-5%) Suburban 2009-2011 Transparent Armor as applicable; Driver Rear Door (1 Each BR6 38mm +/-5%) Suburban 2009-2011 and 2  Each Passenger Rear Door BR6 (38mm +/-5%) Suburban 2009-2011 Glass.


Similar Contracts

NAICS: 336992
New
Federal
BULLET RESISTANT WINDSHIELDS, DOOR and WINDOW GLASSThe United States Army Corps of Engineers is seeking a small business contractor to supply and install ballistic resistant glass on six vehicles used in the INTAC course, specifically replacing windshields, door glass, and window glass to meet enhanced protective standards. The contractor must provide all labor, materials, equipment, and supervision necessary to complete the procurement and installation, ensuring the glass meets required ballistic resistance specifications for operational safety. The work will be performed at the Summit Point, West Virginia location, and the contract is structured as a total small business set-aside under NAICS code 336992, ensuring eligibility is limited to qualified small businesses as defined by the Small Business Administration. The solicitation, identified as W912HQ26QA010, was posted on July 2, 2026, with a firm response deadline of July 17, 2026 at 2:00 PM Eastern Time. The contracting office is located in Alexandria, Virginia, under the Department of Defense, and is managed by the W4LD USA Hecsa organization. Primary point of contact for inquiries is Alexander Arnoe, reachable via email or phone, with Doug Pohlman available as a secondary contact. All proposals must be submitted through the SAM.gov portal linked in the solicitation, and contractors are expected to adhere to federal procurement guidelines, including compliance with performance and delivery expectations outlined in the request.
W4LD USA Hecsa

POSTED

3 days ago

DEADLINE

in 13 days
View Details