Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BUR, DENTAL SURGERY

Active
SPE2DH-26-T-5366Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339114 - Dental Equipment and Supplies ManufacturingView NAICS

Place of Performance

UNIT 15479, APO, AP, 96260-5479, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5366.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUR,DENTAL SURGERY
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
1 PG = 5 EA
BUR,DENTAL SURGERY
H1.36.018 no. 6 FG SURG ROUND; CARBIDE; SHANK-36-FG EXTRA LONG; (HEAD SIZE 1/10MM) 018.
UNIT OF ISSUE: PACKAGE (5EA PER PG) .. BIDDER: PLEASE SPECIFY SOURCE AND PART NUMBER BEING SUPPLIED.
SPE2DH-26-T-5366
SECTION B
ADEQUATE DATA FOR THE NSN/Part Number: 6520-01-533-9961 Quantity: 4 PG Purchase Request: 7017577473QTY: 4 Delivery: 81 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339114
New
DIBBS
DISH, MEDICAMENT, DENTALThe contract pertains to the procurement of 10 units of a glass dappen dish specifically designed for dental and medical use, identified by NSN 6520-01-700-5630. The dish measures 1-1/4 inches in outside diameter with a depth of 1 x 1-1/8 inches and is constructed from smooth, transparent, heat-resistant glass to prevent adhesion of dense materials such as acrylics, amalgams, resins, and sealants. It features a thick solid base for stability and spill protection but is not autoclavable, requiring cold sterilization only. The unit of issue is each, and delivery is scheduled within 81 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions based on solicitation or award dates. The procurement is subject to DLA packaging standards, requirements for removal of government identification from non-accepted supplies, and potential handling of covered defense information. The solicitation number is SPE2DH-26-T-5357, posted on July 21, 2026, with responses due by July 28, 2026. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, with performance directed to APO 96260-5479 and primary contact information provided for Craig Singleton. Bidders must clearly identify the source and part number being offered.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
DISPENSER, SOLVENTThe contract calls for the procurement of 80 ESD-safe solvent dispensers, each with a 6-ounce capacity and a purity pump designed to prevent cross-contamination by ensuring fluid does not return to the dispenser. The dispensers must be static dissipative and feature a stainless steel pump with an air-tight check valve, meeting stringent quality and technical standards referenced from the DLA Master List of Technical and Quality Requirements. Packaging and marking must comply with MIL-STD-2073-1E for preservation and MIL-STD-129 for labeling, including barcoding, while medical item labeling follows Medical Marking Standard No. 1. Hazardous materials are strictly regulated, with mandatory SDS submissions and adherence to OSHA’s Hazard Communication Standard, and mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional uses such as batteries or instruments, with additional containment requirements for portable fluorescent lamps and instruments. Delivery is required to New Cumberland, PA 17070-5002 by July 24, 2026, with FOB destination terms placing all transportation risk and cost on the contractor. The solicitation number is SPE2DS-26-T-236N, issued by the Department of Defense’s Medical Supply Chain, and responses must be submitted electronically via DIBBS by July 24, 2026. Contractors must provide their UEI and CAGE code if offering covered defense telecommunications equipment or services and must represent their small business status if applicable. Contract clauses incorporate key FAR and DFARS requirements including equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, trafficking in persons, cybersecurity compliance with NIST SP 800-171, and mandatory invoicing through WAWF. Compliance with DLA packaging standards RP001 and the removal of government identification from non-accepted supplies is required, alongside adherence to rules governing compensation of former DoD officials and whistleblower protections. No contract pricing is specified in the solicitation, and the basis of award remains undisclosed, though price is likely a primary consideration in this simplified acquisition under a NAICS code of 339114 for medical and dental equipment and supplies manufacturing.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339114
New
DIBBS
GUTTA PERCHA POINTSGuttapercha points for endodontic root canal therapy are being procured in assorted sizes 15 through 40, designed for use with .06 taper files in single cone obturation techniques. Each package contains 60 points, and the item is designated by NSN 6520-01-532-1818 with a total quantity of two packages. The product must comply with strict shelf-life requirements, mandating a non-extendable 24-month expiration period from manufacture. Technical and quality standards referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date. Packaging must adhere to DLA procurement guidelines, and all supplies must be free of government identification if rejected. Bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DH-26-T-5355, has a response deadline of July 28, 2026, with delivery due within 84 days after award to APO zip code 96260-5479. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tara Quinty as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
GUTTA PERCHA POINTSGutta percha points for endodontic root canal therapy are supplied in assorted sizes ranging from 45 to 80, with each package containing sixty points distributed across the specified sizes: 45, 50, 55, 60, 70, and 80. These points are intended for use with .06 taper files in single cone obturation techniques after endodontic treatment. The unit of issue is a package of sixty, and the items are classified as a TYPE I (CODE M) product with a mandatory shelf life of twenty-four months that cannot be extended. All supplies must comply with the Department of Defense’s technical and quality requirements referenced in the DLA Master List, and packaging must conform to DLA procurement standards. Government identification must be removed from non-accepted supplies, and the item is subject to potential covered defense information controls. The solicitation number is SPE2DH-26-T-5354, with a response deadline of July 28, 2026, and the NSN is 6520-01-532-2067. A quantity of two packages is required to be delivered within eighty-four days of award to APO ZIP 96260-5479. Bidders must clearly identify the source and part number being offered, and all inquiries should be directed to Tara Quinty at the provided DLA contact information.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
PROSTHETIC SCREW, DE
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
BUR, DENTAL, EXCAVATING
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339114
New
DIBBS
BUR, DENTAL SURGERY
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
KIT, RESTORATION, DENTALThe product is a dental restoration kit composed of reinforced zinc oxide-eugenol, designed for intermediate restorations with a durability of up to one year. It consists of separate powder and liquid components mixed in a 6-to-1 ratio by weight, achieving an initial set within five minutes of mixing. Each kit contains one bottle of powder and one bottle of liquid, sold as a single unit. The item has a non-extendable shelf life of 24 months and is classified as a TYPE I (CODE M) item under applicable supply standards. Packaging must comply with SPE2DH-26-T-5346 and relevant hazardous materials regulations including 49 CFR and ICAO guidelines. A current Material Safety Data Sheet (MSDS) is required and must accompany each shipment, submitted electronically to DLA.MSDS@DLA.MIL along with the required cover sheet. The item is subject to hazardous communication standards and requires removal of government identification from non-accepted supplies. The solicitation was issued under contract number SPE2DH-26-T-5346 with a response deadline of July 28, 2026, and requires delivery to Fort Lewis, WA within 20 days after award. The NSN is 6520-01-169-1762 and the NAICS code is 339114. Point of contact is Tina Vu at DLA, with email and phone provided for inquiries.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
Federal
36C25526Q0529 | ROLLA DENTAL LAB EQUIPMENT
255-NETWORK Contract Office 15 (36C255)

POSTED

about 24 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339114
New
Federal
6520--Equipment/Maintenance Coverage, Primemill, Dental Service, Ann Arbor
250-NETWORK Contract Office 10 (36C250)

POSTED

about 24 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339114
New
Federal
6520--Control Motor Dental AP: 36C252-26-AP-3505 PR: 585-26-4-969-0247
252-NETWORK Contract Office 12 (36C252)

POSTED

about 24 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
Supply of Unspecified Medical Item (CLIN 0002)The contract solicits the supply of a small-lot medical item packaged in units of 50, with the exact product to be determined after award through a subsequent option or order. The North American Industry Classification System code is 339114, indicating the focus is on medical equipment and supplies manufacturing. This is a subcontract under the Department of Defense, specifically managed by the Medical Supply Chain MD Surg FSF, with performance required at Fort Bliss, Texas, zip code 79918-0000. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with no set-aside designation applied. The detailed specifications for the medical item will be formally identified only after the contract is awarded, allowing flexibility in sourcing based on evolving operational needs or availability.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 334519
New
DIBBS
HYDROMETER, GRADUATEThe contract specifies the procurement of one each of a graduated hydrometer with an integrated thermometer for measuring liquid temperature, featuring a specific gravity range of 39 to 51, manufactured from soda lime glass with 0.1 increments, and compliant with ASTM specification 6H. The device is lead and mercury free and meets NIST certification standards. Packaging must adhere to DLA requirements and the Medical Marking Standard No. 1, superseding MIL-STD-129, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery via common carrier at the lowest cost to the designated delivery point. All items must be marked in accordance with medical marking standards and government identification must be removed from non-accepted supplies. The solicitation number is SPE2DH-26-T-5363, with a response deadline of July 28, 2026, and delivery required within 20 days after award. The product is identified by NSN 6630-01-687-6909 under a federal procurement managed by the Department of Defense's Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, and the solicitation may involve covered defense information.
Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
DIBBS
COVER GLASS, MICROSCOPEThe cover glass for microscope slides is made from high-quality, clear, non-fogging, non-corrosive borosilicate glass with parallel surfaces and uniform homogeneity to ensure consistent wetting and optical clarity. It is colorless, exhibits low auto-fluorescence, and is thoroughly cleaned and washed for immediate use across all levels of microscopy. Each cover glass measures 22mm by 22mm with a thickness of #1, ranging from 0.13mm to 0.17mm. The product is sold by weight in 1-ounce containers, with ten containers per package, and the unit of issue is each. The NSN is 6640-01-718-7221, and the contract is issued under solicitation SPE2DH-26-T-5374 with a response deadline of July 28, 2026. The requirement is for two units, with delivery expected within five days of award, and the place of performance is APO, 96328-5225. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and packaging, handling, and government identification removal must comply with applicable DLA standards. The contracting office is part of the Department of Defense’s Medical Supply Chain, with Tina Vu as the primary point of contact.
All Other Industrial Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DISPOSAL CONTAINER,The contract specifies the procurement of 10 disposal containers designed for the safe disposal of hypodermic needles and syringes, with dimensions between 6 to 7 inches in length and 1 to 2 inches in diameter, featuring a securable cap and a lift-off cover to ensure safe containment. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size, and packaging, handling, and identification standards enforced per DLA regulations including the removal of government identification from non-accepted items. The item is identified by NSN 6530-01-645-6923 under solicitation SPE2DH-26-T-5351, issued on July 21, 2026, with responses due by July 28, 2026, and delivery required within 20 days of award to Fort Campbell, Tennessee, 42223-5000. The procurement falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Covered defense information provisions may apply, and all supplies must comply with federal acquisition standards.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
TEST TUBE, BLOOD COLLECThe contract specifies the procurement of 2 packages of glass blood collecting test tubes, each package containing 100 units, for use exclusively with the QBC STAR centrifugal hematology analyzer. Each unit must have a shelf life of nine months, and no more than two months may have elapsed from the date of manufacture to the date of delivery to the government. Labels on the product must include the NSN 6640-01-587-9896, manufacturer and CAGE code, date of manufacture, expiration or retest date, and the contract number with lot number. The items are not regulated by the FDA. Packaging must comply with Commercial packaging standards and Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring each unit is sealed in a container that prevents damage and breakage, and all shipping containers must be suitable for safe delivery via common carrier at the lowest cost to the specified delivery point in Norfolk, Virginia. Bidders must clearly state the source and part number being supplied. The solicitation incorporates technical and quality requirements from the DLA Master List, and applicable provisions include packaging, removal of government identification from non-accepted supplies, and potential coverage under defense information regulations. Delivery is required within 20 days of award under solicitation SPE2DH-26-T-5377, with responses due by July 28, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
BAG, STERILIZATION-BIOHThe contract specifies the procurement of heavy-duty, puncture-resistant sterilization biohazard disposal bags in red or orange color to indicate contamination, intended for autoclaving biologically contaminated materials such as culture dishes prior to disposal. The unit of issue is a package containing 200 bags, and the material must comply with medical marking standard no. 1, superseding MIL-STD-129, with packaging required to be commercial and secure, using sealed unit containers and suitable shipping containers that ensure safe delivery at the lowest carrier rate. The supplies are subject to DLA packaging requirements and technical quality standards referenced in the DLA Master List, with revisions tied to the solicitation or award date depending on acquisition type. The NSN 6530-01-078-0365 is associated with two approved manufacturers, MEDEGEN MEDICAL PRODUCTS, LLC and BAXTER HEALTHCARE CORP, and the delivery is scheduled for five days FOB destination with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must adhere to MIL-STD-2073-1E. The solicitation, issued under SPE2DH-26-T-5368, has a response deadline of July 28, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH with Tina Vu as the primary point of contact.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BALL, PHYSICAL THERAPYThe contract pertains to the procurement of BALL PHYSICAL THERAPY items identified by NSN 6530-01-699-5154 and part number LE9565, with a quantity of six units to be delivered within five days FOB destination. The unit price is $6.00 per unit, totaling $36.00, with no variance allowed in quantity. All items must comply with the latest edition of the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, ensuring each unit is sealed in a protective container and shipped in commercial exterior packaging suitable for safe transport at the lowest cost. Marking and palletization must follow strict DLA guidelines, and the items are not regulated by the FDA. Delivery is required to Rose Barracks, Building 728, AWCF SSF, Sudlager Straße, Vilseck, Germany, with the original required delivery date set for July 23, 2026. The solicitation number is SPE2DH-26-T-5345, issued by the Department of Defense under the NAICS code 339113, with Tina Vu listed as the primary point of contact. All technical and quality requirements referenced are governed by the DLA Master List, and shipping must comply with DLA Procurement Notes C19 and C20.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BLANKET, COOLING, HYPERTThe cooling blanket for hyperthermia is constructed from polar skin mini-mesh saturated in ArctiAqua, designed to activate evaporative cooling in response to elevated body temperature. It is a single-use, large-format item measuring 36 inches wide by 30 inches long, with each individual sheet weighing 0.6 pounds. The blanket is individually packaged in a rugged, durable foil pouch that prevents air and moisture transfer, with each package measuring 4.5 inches by 7.75 inches by 0.5 inches. The item has a non-extendable shelf life of 60 months, and no more than nine months may have elapsed from the date of manufacture to the date of delivery to the government. The unit of issue is each, and procurement follows DLA packaging, technical, and quality requirements as defined in the DLA Master List of Technical and Quality Requirements. The item is identified by NSN 6532-01-653-6054, with a purchase request quantity of nine units and a delivery requirement within five days of award. The contract solicitation number is SPE2DH-26-T-5384, issued by the Department of Defense through the Medical Supply Chain FSH, with performance located at Fort Hood, Texas, and primary point of contact Tina Vu.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
TIP, PIPETThe contract specifies the procurement of 500 plastic pipettes, each with a capacity of 5 milliliters, under the part number 6640-01-473-0772 and purchase request 7017530261, with a single unit of issue equaling 500 units. Delivery is required within 20 days to the destination FPO AA 34092 aboard the USS NEW YORK LPD 21, with FOB destination terms and no variance allowed in quantity. All packaging must comply with DLA Packaging Requirements for Procurement, ensuring each unit is sealed in a protective container and shipped in commercial exterior containers suitable for safe transport at the lowest cost, while strictly adhering to Medical Marking Standard No. 1, superseding MIL-STD-129. The item is not regulated by the FDA but is classified as a critical application item and must not contain or come into direct contact with mercury or mercury compounds except under specific exceptions for batteries, instruments, or reagents as defined by NAVSEA. Packaging must also conform to ASTM D3951 if non-hazardous per FED-STD-313, though DLA’s Master List of Technical and Quality Requirements takes precedence. The shipment must be sent via traceable means only; parcel post is prohibited, and all labeling, palletization, and documentation must align with the specified DLA standards. The supplier must provide the correct contract line item and part number, and all deliveries must be received and accepted at the destination point.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
COAT, MAN'S PAJAMAThe contract is for a man’s pajama coat, specifically a full-length, broadcloth style made of cotton and polyester with a snap fastener front, in blue overall color, offered as a single unit. It is identified by NSN 6532-00-081-1802 and requested in a quantity of one unit under purchase request 7017546134, with delivery required within five days of award. The solicitation, issued under number SPE2DH-26-T-5360, was posted on July 21, 2026, with a response deadline of July 28, 2026, and falls under NAICS code 423450 for wholesale trade in apparel and accessory merchandising. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA standards, and all non-accepted supplies must have government identification removed prior to return. The offering agency is the Department of Defense, specifically the Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact for inquiries.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BOTTLE, DROPPERThe contract specifies the procurement of a 1-ounce amber glass bottle with a rubber and plastic pipette bulb and black mold cap, designated as a dropper, with a unit of issue being a box of 12 each. All packaging must comply with commercial standards as outlined in the procurement documentation, ensuring each unit is sealed in a container that protects against damage or breakage. Exterior shipping containers must be suitable for safe delivery via common carrier at the lowest rate to the designated point of delivery, with export packaging required when necessary. Items must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. The item is identified by NSN 6530-01-717-9330, with one box requested under purchase request 7017577637 and a delivery deadline of five days ADO. The solicitation, issued under contract number SPE2DH-26-T-5367, was posted on July 21, 2026, with responses due by July 28, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH office, with Tina Vu listed as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details