Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

BUSHING, NONMETALLIC

Awarded

SPE7M2-26-T-5335Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Contract SPE7M226P3295 was awarded on July 15, 2026, to AEK TECHNOLOGY, LLC for a total price of $863.00. This firm-fixed-price award, issued by the Defense Logistics Agency Land and Maritime Nuclear Reactor Program under solicitation SPE7M2-26-T-5335, is for the procurement of 863 nonmetallic bushings (NSN 5365-01-304-1316) at a unit price of $1.00. The contract is categorized under NAICS code 339991 and requires delivery to DLA Distribution Cherry Point in North Carolina, with an original required delivery date of June 13, 2027. The contractor must adhere to strict military standards for execution, including MIL-STD-2073-1E for packaging, MIL-PRF-23199 for preservation, and MIL-STD-129 for marking and bar-coding. The items are designated as Type I shelf-life items with a minimum 60-month shelf life required upon receipt. Inspection and acceptance are conducted by the government at the destination. Administrative requirements mandate electronic invoicing and receiving reports through the Wide Area WorkFlow system, and the award incorporates various FAR and DFARS clauses regarding equal opportunity, cybersecurity safeguarding, and prohibitions on certain telecommunications equipment.

General Info

AEK TECHNOLOGY, LLC to supply nonmetallic bushing for $863, award date July 15, 2026, DLA contract, contact David Larsen.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$863

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

AEK TECHNOLOGY, LLCView Profile

Award Issued Date

07/15/2026, 12:00:00 AM UTC

Documents

(2)

SPE7M226P3295 DLA Master Solicitation Award Document

PDF•contract-document

RFQ SPE7M2-26-T-5335 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded

PostedJun 28

Solicitation

AwardedJul 15

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressUSA

Contacts

David Larsen

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE7M226P3295 posted on DIBBS. Awardee: AEK TECHNOLOGY, LLC (CAGE 00QZ2) Total Contract Price: $863.00 Award Date: 07-15-2026 Solicitation: SPE7M2-26-T-5335 Line items: - BUSHING, NONMETALLIC (NSN/Part 5365013041316, PR 7017316070)

Similar Contracts

Same NAICS industry code

COUPLING, FLEXIBLE

Solicitation # SPE4A7-26-R-0778

Solicitation SPE4A7-26-R-0778 is an Indefinite Quantity Contract issued by DLA Aviation for the procurement of Flexible Couplings (NSN 1660-00-560-4009), identified as a Critical Application Item. The contract features a three-year base period with a guaranteed minimum quantity of 42 units and an estimated annual quantity of 120 units. Delivery is required 365 days after receipt of order, with inspection and acceptance occurring at the destination. The procurement is a Firm Fixed Price agreement and allows for approved part numbers from The Boeing Company, Arrowhead Products Corp, and Flexible Technologies Inc. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for Source Approval Requests, tailored higher-level quality requirements, and CMMC Level 2 self-assessment. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Quality assurance involves sampling methods per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

in about 1 month

PACKING, PREFORMED

Solicitation # SPE7L3-26-T-237G

This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 407 units of preformed packing under NSN 5330-00-922-5947. The contract is open for full and open competition with a delivery requirement of 46 days after the order is placed. The items must be completely free of asbestos, and any alternative materials must be approved according to specific regulatory clauses. The procurement is subject to several technical and quality requirements, including DLA packaging standards and configuration change management protocols. Notably, the items are classified as Type I (Code Y) with a non-extendable shelf life of 180 months. All suppliers must adhere to the DLA Master List of Technical and Quality Requirements and comply with regulations regarding covered defense information and the removal of government identification from non-accepted supplies.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

Hydraulic Seal & Gasket Supply

Ok DLA Aviation At Oklahoma City

POSTED

about 15 hours ago

DEADLINE

in about 1 month

SEAL ASSEMBLY KIT

Solicitation # 7017777381

This sources-sought notice issued by DLA Land and Maritime is for a Seal Assembly Kit under NSN 5330-014629466. The current approved source is Curtiss-Wright Electro-Mechanical Corp. Due to the AMC/AMSC designation of 3D, the item is typically procured from the actual manufacturer because the technical data required for competitive solicitation is not economically available or physically accessible. The agency is seeking additional qualified sources capable of manufacturing these items. Interested companies may submit information to Contract Specialist Amber Rohly by the response deadline of September 19, 2026. To become an approved source, applicants must submit a Source Approval Request package through the DLA Land and Maritime program to demonstrate that their product meets or exceeds the quality of the original equipment manufacturer.

DLA Land And Maritime

POSTED

about 15 hours ago

DEADLINE

53--PARTS KIT,SEAL REPLACE

Solicitation # SPE7L3-26-T-248P

Solicitation SPE7L3-26-T-248P is a request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of three seal replacement parts kits for mechanical equipment, identified by NSN 5330015981569. This is a fixed-price contract designated as a total small business set-aside under NAICS code 339991. The approved source is listed as 0B9E8 70J600-5. Quotes must be submitted electronically via the DIBBS system by the deadline of September 21, 2026. The required delivery date is November 11, 2027, with a need ship date of March 9, 2027, and a delivery period of 168 days. Delivery is FOB Destination to DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for UV-sensitive items to be sealed in opaque bags per MIL-DTL-117. The contract incorporates various FAR and DFARS clauses, including the Buy American Act and Berry Amendment restrictions. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system. Award may be determined via an automated process, and a HUBZone price evaluation preference may be applied.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

53--SEAL,INFLATABLE

Solicitation # SPE7L3-26-T-247F

Solicitation SPE7L3-26-T-247F is a Request for Quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of 11 inflatable seals identified by NSN 5330002252287. This procurement is set aside exclusively for SBA-certified Women-Owned Small Business (WOSB) concerns. The solicitation was posted on September 11, 2026, with a response deadline of September 21, 2026. Quotes must be submitted electronically via the DIBBS system. The required delivery date is April 11, 2027, with a need ship date of January 22, 2027, and shipping terms are FOB Destination to the DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking and MIL-STD-130N for identification. Due to the nature of the items, they must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and comply with MIL-STD-2073-1E and RP001 for palletization. All supplied items must be free of asbestos. Offerors must comply with the Buy American Act and the Berry Amendment, providing full disclosure if non-domestic materials are used. Payment and invoicing will be processed electronically through the Wide Area WorkFlow (WAWF) system. The award may be processed as an automated award, and offerors are encouraged to provide quantity ranges in their quotes.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-10U5

Solicitation SPE7L1-26-T-10U5 is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 14 units of O-rings under NSN 5331014745530. This is designated as a critical application item under NAICS code 339991. The procurement is managed by the Land Supply Chain office in Columbus, Ohio, with a response deadline of September 21, 2026. Quotes must be submitted electronically via the DIBBS system. The approved source for this item is 0AZ22 V24509-20-07-18. The delivery requirement is set for 147 days after order, with a need ship date of February 16, 2027, and delivery to DLA Distribution San Joaquin in Tracy, California. The contract specifies FOB Origin terms, while inspection and acceptance will occur at the destination per FAR 52.246-1. Packaging must adhere to MIL-STD-2073-1E and marking must comply with MIL-STD-129. Invoicing and payment processing are required through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. The solicitation incorporates several FAR and DFARS clauses, including those regarding equal opportunity for workers with disabilities, combating trafficking in persons, and sustainable products. Offerors are assumed to provide supplies of domestic origin unless otherwise indicated.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-002P

Solicitation SPE7LX-26-U-002P is a request for quotations from the Department of Defense, specifically the Strategic Acquisition Program Directorate under DLA Land and Maritime, for the procurement of gaskets identified by NSN 5330150110674. This procurement may result in a unilateral Indefinite Delivery Contract with a one-year term or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The estimated annual demand is 157 units, with a guaranteed minimum quantity of 23 and an expected average of 12 orders per year. Delivery is required within 97 days of order, with shipments directed to various CONUS and OCONUS DLA Depots. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-117 for the use of medium duty, waterproof, greaseproof, opaque bags to prevent UV deterioration. All quotes must be submitted electronically via the DIBBS portal by September 25, 2026. Award evaluation will be based on the price quoted for the estimated annual demand. Additionally, contractors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and utilize the Wide Area Workflow system for all invoicing and receiving reports. Inspection and acceptance will occur at the destination.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

SEAL,AIR,NONAIRCRAF — 2835014700838 — SPRMM126QHE54

Solicitation # SPRMM126QHE54

This solicitation, issued by DLA Mechanicsburg under FAR Part 12 and FAR Part 18 Emergency Acquisition Flexibilities, seeks quotes for the manufacture of non-aircraft air seals. Award evaluations will be based on the Lowest Price Technically Acceptable criteria. The contract requires strict adherence to item unique identification and marking standards per MIL-STD-130, and packaging must comply with MIL-STD 2073. Contractors must provide the Original Equipment Manufacturer details if they are not the manufacturer and must submit invoices and receiving reports electronically via PIEE-WAWF. The agreement includes specific protocols for design changes, requiring a coded notification system for any substitutions. Additionally, the contract mandates that production facility changes be approved in writing by the Contracting Officer and may require a price reduction to cover administrative costs.

SPRMM1 DLA Mechanicsburg

POSTED

about 23 hours ago

DEADLINE

Specialized Gasketing & Sealing Materials Supply

Procurement-Goods & Services

POSTED

DEADLINE

O-Ring Supply (NSN 5331002639540)

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Critical Application Gaskets

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 10 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The contract requires delivery within 60 days after receipt of the order. Strict compliance is required regarding cybersecurity and export controls. The provider must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to regulations concerning Covered Defense Information. Additionally, the technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 10 hours ago

DEADLINE

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Storage Batteries (NSN 6140-01-713-7559)

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-T-5218

The Defense Logistics Agency, through DLA Land and Maritime, has issued solicitation SPE7L7-26-T-5218 as a Request for Quotations for three storage batteries, identified by NSN 6140017137559. This procurement is a total small business set-aside under NAICS 335910, with a response deadline of September 21, 2026. The required hardware must meet the specifications for East Penn Manufacturing Co. part number 18-G75-21EE IST6G08-NAV1 and is designated as a critical application item. The items have a non-extendable shelf life of 12 months and must be delivered to NAVSUP FLC Yokosuka in Japan within 20 days after receipt of order. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, with specific labeling requirements for hazardous materials per the Hazard Communication Standard. Inspection and acceptance will occur at the destination. All quotes must be submitted electronically via the DIBBS system. The award process may utilize automated award and incorporates the HUBZone price evaluation preference. Compliance with various FAR and DFARS clauses is required, including those regarding cybersecurity safeguarding, the Berry Amendment, and the Buy American Act. Invoicing and payment must be processed through the Wide Area Workflow system.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

46--MODIFICATION KIT,WATER

Solicitation # SPE8E8-26-T-5568

Solicitation SPE8E8-26-T-5568 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office, for the procurement of two water treatment equipment modification kits under NSN 4610017148561. The requirement specifically references HDT Expeditionary Systems Inc part number T00012-5083-2. This is a total small business set-aside under NAICS 333310, with a response deadline of September 21, 2026. Delivery is required within 20 days after receipt of order, with the destination for inspection and acceptance located at Camp Pendleton, California. The procurement requires electronic submission of quotes via the DIBBS system. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and follow DLA packaging requirements RP001. Invoicing and payment must be processed through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Notably, the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS