Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BUSHING, SLEEVE

Active
SPE4A6-26-T-11PHFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one bushing, sleeve with part number 20021A1113 and NSN 3120015672985, issued under solicitation SPE4A6-26-T-11PH by the Department of Defense’s ASC Commodities Division. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references to RD003, RP001, RQ011, and RQ017, which dictate handling of covered defense information, packaging standards, removal of government identification from non-accepted items, and physical marking of bare parts. Item Unique Identification is not required per the Service customer’s request, governed by DFARS 252.211-7003(c)(1)(i). Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified, with attributes classified as critical, major, or minor对应 verification levels VII, IV, II or AQLs of 0.1, 1.0, 4.0 respectively. Packaging must adhere to ASTM D3951 while fully conforming to MIL-STD-129 labeling and DLA packaging standards per RP001, with palletization required. The unit of issue is EA, and delivery is set for FOB origin within 10 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at destination. Shipment must be sent via traceable freight, not parcel post, to the specified military address at Camp Lejeune, NC, with RDD code E and project identifier TP 2. The original required delivery date is July 28, 2026, with the solicitation posted August 3, 2026, and responses due by August 11, 2026. Point of contact is Robin Braden at DLA.

General Info

Procure one bushing sleeve, part 20021A1113, FOB origin, delivery by July 28, 2026, to Camp Lejeune, NC, per MIL-STD and DLA standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

PSC BOX 20090, CAMP LEJEUNE, NC, 28547, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11PH.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Robin Braden
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUSHING,SLEEVE
BUSHING,SLEEVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
P/N 20021A1113
TDP Rev A Gen 1 IAW BASIC DRAWING NR 07FZ4 20021A1113 REVISION NR A DTD 07/13/2004 PART PIECE NUMBER: 20021A1113
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 QAP-B02 REVISION NR B DTD 12/11/2013 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A6-26-T-11PH
SECTION B
PR: 7017673391 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017673391 0001 EA 1.000
NSN/MATERIAL:3120015672985
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
M20460
COMMANDING OFFICER
2D LIGHT ARMORED RECON BN 2D MARDIV
PSC BOX 20090
CAMP LEJEUNE NC 28547
US
RDD(3-POS RDD)/ANMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
M20460
DISTRIBUTION MANAGEMENT OFFICE
BLDG 1012,O STREET BAY#8
M/F M20460 2D LAR BN 2D MARDIV
CAMP LEJEUNE NC 28547-2503
US
M/F: (TCN) M2046062040116
RDD: E
PROJ: TP 2
SUPP ADD: YALPHA SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: ADV: FC: CS
SPE4A6-26-T-11PH
SECTION B
PR: 7017673391 PRLI: 0001 CONT’D
Need Ship Date:00/00/0000 Original Required Delivery Date:07/28/2026
SPE4A6-26-T-11PH NSN/Part Number: 3120-01-567-2985 Quantity: 1 EA Purchase Request: 7017673391QTY: 1 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BUSHING, SHROUD
Solicitation # SPE4A6-26-T-11MB
The contract specifies the procurement of 817 units of BUSHING, SHROUD with NSN 3120-01-131-0493 under solicitation SPE4A6-26-T-11MB, with a delivery requirement of 130 days ADO. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the appropriate revision determined by the acquisition type and relevant dates. The item is subject to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and configuration change management must follow engineering change proposal and variance procedures. Inspection and acceptance must occur at the origin, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs this exception. Technical data associated with the item is controlled under ITAR or EAR, prohibiting export without prior authorization from the Department of State or Commerce, including disclosures to foreign persons regardless of location. Only DLA contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access this data. Packaging must comply with DLA standards, and covered defense information protocols apply. The place of performance is Jacksonville, Florida, with Tracy Fletcher as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
CUP, TAPERED ROLLER B
Solicitation # SPE4A6-26-T-11MS
This contract specifies the procurement of a tapered roller bearing cup, identified by NSN 3110-00-074-1683 and part number 5T2-8080-13, with a required quantity of nine units to be delivered within five days under FOB origin terms. The bearing must be manufactured in the United States, its outlying areas, or Canada, with more than 50 percent of the cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these regions, as mandated by DFARS Clause 252.225-7016. Contractors are required to submit a formal declaration regarding the domestic or foreign origin of materials, obtainable from the DLA Foreign Bearing website, and failure to provide this documentation will disqualify the bid. The solicitation may be canceled or held pending a waiver if no compliant offerings are received. Packaging and preservation must comply with MIL-STD-2073-1E, MIL-DTL-197M, and DLA-specific packaging requirements, including proper preservation methods based on bearing type and closure, protective lubricant selection, and adherence to quality assurance protocols. Marking is to follow MIL-STD-129 with no special marking codes applied, and palletization must meet DLA standards. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. This is a critical application item subject to stringent identification and traceability requirements under RQ017, and all technical and quality conditions referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-08CL
The contract is for the procurement of 65 units of a BUSHING, SLEEVE with NSN 3120-01-490-4720 under solicitation SPE4A6-26-T-08CL, issued by the ASC COMMODITIES DIVISION of the Department of Defense. Delivery is required within 171 days of award, with the place of performance located in New Cumberland, Pennsylvania, 17070-5002. The item is subject to stringent cybersecurity and export control requirements, including CMMC Level 2 certification for any third-party assessment organization involved, and the handling of Covered Defense Information as defined under RD002. Technical data associated with this item is controlled under ITAR or EAR, meaning any export—including disclosure to foreign persons within the United States—requires prior authorization from the Department of State or Department of Commerce, with DFARS 252.225-7048 governing compliance. Distribution of this controlled data is strictly limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and questionnaire, and have received formal approval from DLA to access such data. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, and is managed by primary point of contact Jerald Jones, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-11PJ
The contract pertains to the procurement of one sleeve bearing with NSN 3120-01-676-1629 and part number 001-00222-000, supplied by INSITU, INC., under solicitation SPE4A6-26-T-11PJ. The item must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, which override any other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and all items must be marked and labeled per RQ017 physical identification standards. The bearing must be delivered FOB origin within 20 days of contract award, with no tolerance for quantity variance. Delivery is required to Fort Stewart, Georgia, with shipment via the fastest traceable means, excluding parcel post. Inspection and acceptance occur at the destination, and the unit of issue is each, with a total price of $1.00. The item must also meet tailored higher-level quality requirements and government identification removal specifications if non-accepted. The original required delivery date is July 28, 2026, and the contract includes specific government use codes and project identifiers for tracking and logistics.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-26-T-11KY
The contract is for the procurement of 150 annular ball bearings with NSN/Part Number 0001S00000053, issued under solicitation SPE4A6-26-T-11KY by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 333 days after contract award, and the place of performance is New Cumberland, Pennsylvania, with a response deadline of August 11, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Suppliers must comply with stringent documentation and certification requirements, including Cybersecurity Maturity Model Certification Level 2, DLA packaging standards, and tailored higher-level quality controls applicable to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposal and variance requests. Inspection and acceptance must occur at the origin, and government identification must be removed from non-accepted items. Technical data associated with this item is subject to export control under ITAR or EAR, with distribution restricted to contractors approved by DLA, holding valid US/Canada Joint Certification Program status, and having completed mandatory export control training and questionnaires. Item Unique Identification is waived per customer request, and DFARS clauses 252.211-7003 and 252.225-7048 govern these specific conditions. Point of contact for inquiries is Alexis Dunnavant.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-11JW
This contract specifies the procurement of one bushing, sleeve with NSN 3120-01-561-6125 under solicitation SPE4A6-26-T-11JW, with a required delivery within 20 days of award and delivery point at FOB origin. The item is to be furnished in strict compliance with DLA packaging requirements, including MIL-STD-2073-1E for preservation and MIL-STD-129 for marking, with no special marking required. Packaging must prevent mercury contamination, as mercury and mercury-containing compounds are prohibited in preservation, packaging, and marking processes except for specific functional uses in batteries, lighting, instruments, or weapon systems as defined by NAVSEA, and any portable mercury-containing devices must have shockproof construction and secondary containment. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; if unspecified, attributes are considered major. Zero non-conformances are required in sampled lots unless otherwise stated. The item must be supplied by ITW Food Equipment Group LLC with part number 00-874138 and is subject to technical and quality requirements referenced via DLA’s Master List. Delivery is directed to COMNAVAIRLANT SWWP EQOL HAB in Norfolk, VA, with shipment requiring the fastest traceable means, prohibiting parcel post. The contract enforces strict adherence to unit of issue standards and compliance with all DLA procedural notices including C19 and C20 for transportation.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
CAP, PILLOW BLOCK
Solicitation # SPE4A6-26-T-11MM
The contract pertains to the procurement of one CAP, PILLOW BLOCK with NSN 3130-01-646-9589 and part number 02-4535-01 manufactured by SCOTSMAN INDUSTRIES INC DIV. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA Packaging Requirements for Procurement and MIL-STD-2073-1E, including specific preservation methods, wrapping, container types, and marking per MIL-STD-129 with no special marking codes. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Unit of issue is each, with zero variance allowed on quantity, and delivery is required FOB destination within 20 days of contract award, with an original required delivery date of December 10, 2025. Shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and addressed to USNS SUPPLY T AOE 6 at FPO AE 09587-4037. Item Unique Identification is not required per customer request, and measuring and test equipment compliance, physical identification marking, and tailored quality requirements for manufacturers and non-manufacturers are mandated. All vendors must use the VSM system, and contractual data is tied to solicitation SPE4A6-26-T-11MM with point of contact Alexis Dunnavant.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
COLLAR, BEARING
Solicitation # SPE4A6-26-T-09SH
The contract solicitation, identified by number SPE4A6-26-T-09SH, seeks the procurement of 205 units of a bearing collar under NSN 3110-01-734-2811, issued by the Defense Logistics Agency under the Department of Defense. Responses are due by August 3, 2026, and the solicitation is posted on DIBBS with no set-aside designated, though compliance with socioeconomic representation requirements in SAM is mandatory for offerors claiming small business status. Delivery is required FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a performance timeline of 335 days after order placement, targeting delivery by July 5, 2027. The contract is structured as a firm-fixed-price acquisition under simplified procedures, with pricing details missing from Section B, rendering the total contract value undetermined. All items must comply with MIL-DTL-197M for packaging and preservation, including specified containment, cushioning, wrapping, and preservation methods denoted as variable "ZZ", and conform to MIL-STD-129 for labeling, marking, and barcoding; bare item marking with the manufacturer's part number is required. Packaging must also follow DLA’s RP001 palletization standards. Hazardous materials must adhere to 29 CFR 1910.1200 and federal exemptions under FIFRA, FDCA, TSCA, CAA, and CWA, with Safety Data Sheets submitted prior to award and updated if compositions change. Radioactive materials exceeding 0.002 microcuries per gram or 0.01 microcuries per item must be declared and labeled in accordance with MIL-STD-129, and contractors must notify the Contracting Officer in advance of shipment. Cybersecurity obligations under DFARS 252.204-7012 and safeguarding of covered defense information are required, alongside protections against trafficking in persons, employment eligibility verification, and sustainable product requirements—all modified by Deviation 2026-O0038. Compliance with prohibitions on hexavalent chromium, Communist Chinese military company items, and covered telecommunications equipment is mandatory. Acceptance occurs at the destination per FAR 52.246-2, with inspection responsibilities held by the government. Invoicing must be submitted electronically via Wide Area WorkFlow, and all subcontractors
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, TAPE
Solicitation # SPE7L1-26-T-908L
The contract is for the procurement of eight tapered roller bearings identified by NSN 3110150011119 and part number 504336997 from IVECO DEFENCE VEHICLES S.P.A., classified as a commercial item. The item is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation issue date or award date depending on acquisition size. Sampling and inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Packaging, preservation, and marking must adhere strictly to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, with preservation methods selected based on bearing type, closure, and lubricant specifications outlined in the referenced standards. The contractor’s packaging facility must satisfy quality assurance verification provisions under Section 4 of MIL-DTL-197M. Delivery is required FOB origin within 292 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The unit of issue is each (EA), with a total price of $8.00 per unit for a total contract value of $64. The solicitation number is SPE7L1-26-T-908L, posted on August 3, 2026, with responses due by August 11, 2026, under NAICS code 332991. The contract is managed by the Department of Defense’s Land Supply Chain, with performance directed to New Cumberland, Pennsylvania, and primary point of contact Katherine Woods via email and phone. All packaging and preservation activities must include special marking codes as required, and palletization must meet DLA packaging requirements. The contract explicitly prohibits the removal of government identification from non-accepted supplies and mandates full compliance with preservation process controls for bearing types.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-11MH
This contract solicits annular ball bearings under solicitation SPE4A6-26-T-11MH, specifying two approved part numbers from Schaeffler Aerospace USA Corp and New Hampshire Ball Bearings Inc, both subject to strict domestic sourcing requirements. The bearings must be manufactured entirely in the United States, its outlying areas, or Canada, with more than 50% of the cost of all components—including rolling elements, retainers, inner races, and outer races—derived from these regions. Contractors are required to submit a formal declaration regarding the origin of materials, and failure to provide this documentation may result in disqualification. The item is classified as a commercial item and designated as critical for application, with no unit identification required per government customer request. All bearings must comply with tailored and non-tailored quality requirements referenced from the DLA Master List, including ISO 9001:2015 for manufacturers and non-manufacturers, and must be inspected and accepted at origin. Delivery is due within 95 days FOB origin, with exact quantity of 42 units and zero variance permitted. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-197M for preservation, packing, and marking, incorporating specific protective lubricants determined by bearing type and closure, along with preservation process controls outlined in the standard. Marking must follow MIL-STD-129, and palletization must meet DLA packaging requirements. The NSN 3110012479427 is tied to a unit price of $42.00 for a total contract value of $1,764.00. The solicitation closes on August 11, 2026, and the contracting office is the ASC Commodities Division under the Department of Defense, with performance directed to Tinker AFB. The government reserves the right to cancel or hold the solicitation if no compliant offers are received, pending potential waiver approval under DFARS restrictions.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-11KZ
The contract is for the procurement of 200 units of a BUSHING, SLEEVE with NSN 3120-01-581-7366, issued under solicitation SPE4A6-26-T-11KZ by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within five days of award, and the solicitation closes on August 11, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. The item is subject to tailored higher-level contract quality requirements, inspection and acceptance at origin, and mandatory physical identification marking. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. The item includes technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons even within the United States, and compliance with DFARS 252.225-7048 is mandatory. Access to this controlled data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have received formal approval from DLA. Packaging must meet DLA standards, and non-accepted supplies must have all government identification removed prior to return. The primary point of contact for the solicitation is Braylon Jackson, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-11LA
The contract pertains to the procurement of 35 sleeve bearings with NSN 0001S00000053 under solicitation SPE4A6-26-T-11LA, with a delivery timeline of 880 days after delivery order issuance. Manufacturing may require casting or forging processes, and the government does not necessarily possess the associated tooling, necessitating potential assistance requests through DLA’s designated channels for sourcing and material support. The item is subject to stringent cybersecurity requirements under CMMC Level 2, and the contractor must be certified by a C3PAO. Additionally, covered defense information applies, mandating strict compliance with data handling protocols. Technical data related to this item is controlled under ITAR or EAR, restricting export or disclosure to foreign persons, including foreign nationals within the United States, and requires prior authorization from the Department of State or Department of Commerce. Access to this controlled data is limited to contractors with approved JCP certification, verified completion of DOD export control training, and formal approval from DLA. The contract is managed by the Department of Defense’s ASC Commodities Division, with performance occurring in New Cumberland, Pennsylvania, and primary contact information is provided for inquiries. All responses must be submitted by the deadline of August 11, 2026.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541611
New
DIBBS
Traceability Documentation and DART Database SubmissionThe contract requires the maintenance and submission of complete traceability records for airworthiness parts through the DLA Automated Records Traceability DART database, ensuring full accountability from manufacturing through to final use. This includes the accurate uploading of manufacturer information, lot-level traceability data, and all relevant test results to meet stringent defense aviation standards. The obligation extends to timely and error-free documentation to support regulatory compliance and operational readiness across the Department of Defense supply chain. This subcontract is issued under NAICS code 541611 and is active with a response deadline of August 17 2026 and a posted date of August 3 2026. It is managed by the ASC Commodities Division under the Department of Defense and requires strict adherence to DART protocols without reliance on external or paperbased systems. There is no designated set aside classification and no specific performance location listed indicating the work may be performed remotely or at any qualifying facility meeting federal traceability requirements. Failure to comply with data submission timelines or accuracy standards will result in contract noncompliance.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CUI Compliance (CMMC Level 2)The contract requires implementation and self-assessment for CMMC Level 2 compliance to safeguard Controlled Unclassified Information related to design, manufacturing, and testing data. It applies specifically to systems that handle technical data and traceability records, ensuring that appropriate security controls are in place to protect sensitive information from unauthorized access, disclosure, or compromise. The contractor must align with the CMMC framework’s requirements to achieve and maintain compliance, which includes documenting policies, conducting internal assessments, and demonstrating readiness for potential audits. This is a subcontract under the Department of Defense, managed by the ASC Commodities Division, with a NAICS code of 541512 indicating information technology services. The solicitation was posted on August 3, 2026, and responses are due by August 17, 2026. The performance location is not specified, and there is no set-aside designation. The contract is accessible via a public DIBBS portal, and while a point of contact is not provided, responsible parties are expected to adhere to all CMMC Level 2 controls and maintain ongoing compliance throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 493190
New
DIBBS
MIL-STD-2073-1E and MIL-STD-129 Packaging and MarkingAll units must be packaged and marked in full compliance with MIL-STD-2073-1E and MIL-STD-129, encompassing detailed preservation methods designated as PRES MTHD: 10, and requiring accurate lot and serial number labeling, CAGE code marking, and barcoding for traceability and inventory management. Palletization must adhere to DLA RP001 specifications to ensure uniformity, stability, and readiness for handling and transport within the Department of Defense logistics network. This subcontract is issued under NAICS code 493190 by the ASC Commodities Division of the Department of Defense, with responses due by August 17, 2026, and performance expected to support military supply chain requirements regardless of specific geographic location.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
First Article Testing (FAT) and Government Test Unit ProductionThe contract requires the production and submission of government test units under CLIN 0002 and CLIN 0003 for First Article Testing, with full documentation including a comprehensive FAT report, inspection at the manufacturing origin, and delivery within specified timeframes of 210 and 296 days ADO respectively. The effort is part of a subcontract under the Department of Defense’s ASC Commodities Division, with a NAICS code of 332722 indicating precision instrument manufacturing, and is focused on delivering qualified test units that meet rigorous government technical and procedural standards. The timeline is tightly defined, and the requirement for complete documentation and on-site inspection ensures traceability and compliance before acceptance. The solicitation, posted on August 3, 2026, has a response deadline of August 17, 2026, and is accessible via the DIBBS platform. Although no set-aside type or specific point of contact is provided, the place of performance and organization details indicate this is a federal defense procurement with expectations for full adherence to military quality assurance protocols. Participation requires the ability to manage complex production timelines, document every stage of manufacturing and testing, and coordinate with government inspection teams to validate conformance prior to final delivery.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining of Critical Safety BoltsThe contract mandates the manufacture of 271 precision machine bolts designated by NSN 5306-01-564-3371, engineered to meet strict technical standards, with specific attention to correcting a weight discrepancy found on part number 70400-38159 for MP-35N material. The scope of work encompasses the full production cycle including sourcing of approved materials, precision machining, heat treatment processes, and comprehensive quality verification to ensure compliance with safety and performance requirements. All components must be produced under rigorous quality control protocols to maintain dimensional accuracy and material integrity critical to their function. This subcontract, issued under NAICS code 332722 by the ASC Commodities Division of the Department of Defense, is posted for bid with a response deadline of August 17, 2026. The work is tied to a defense-related production need, emphasizing reliability and adherence to military specifications. While details on delivery location and point of contact are not provided, the place of performance and contracting entity indicate that the finished bolts are intended for use in mission-critical defense systems, requiring full traceability and certification throughout the manufacturing process.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541611
New
DIBBS
Commercial Item Subcontract ManagementThe contract titled Commercial Item Subcontract Management requires the successful offeror to oversee and manage subcontracts for commercial products in full compliance with Federal Acquisition Regulation 52.244-6 and Defense Federal Acquisition Regulation Supplement 252.244-7000. This includes the accurate and complete flow-down of all applicable clauses to subcontractors and ensuring that small business participation is properly integrated throughout the supply chain in alignment with the stated set-aside requirements. All subcontracting activities must adhere to the standards established for commercial item acquisition while maintaining rigorous documentation and oversight to demonstrate compliance. This solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code 541611 applies, indicating the work involves management, scientific, and technical consulting services. The contracting activity is under the ASC Commodities Division of the Department of Defense, and responses must be submitted by August 13, 2026. The contract is intended to support commercial item procurement efforts with a strong emphasis on fostering small business involvement across all levels of subcontracting.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541511
New
DIBBS
Cybersecurity and Covered Defense Information SafeguardingThis contract requires the implementation and maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information as mandated by DFARS 252.204-7012, ensuring compliance with federal security standards for sensitive defense data. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and is governed by the NAICS code 541511, which pertains to custom computer programming services. The contract is administered by the ASC Commodities Division within the Department of Defense and places no specified location for performance, indicating flexibility in execution as long as compliance obligations are met. Respondents must submit proposals by the deadline of August 13, 2026, with the solicitation posted on August 3, 2026, through the DIBBS platform. Although no point of contact or physical performance location is provided, the expectation is for contractors to establish and sustain a verifiable, auditable cybersecurity posture throughout the contract period. The emphasis is on continuous compliance with NIST controls to safeguard covered defense information, and failure to maintain these standards could result in contract termination or penalization under applicable defense acquisition regulations.
Custom Computer Programming Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541512
New
DIBBS
Electronic Invoicing and WAWF Compliance SupportThis contract requires the preparation and submission of electronic invoices through the Wide Area Workflow system with full compliance to Federal Acquisition Regulation clauses and seamless integration support to ensure accurate and timely processing. The work must be performed under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, and the North American Industry Classification System code 541512 indicates the scope centers on computer systems design services, specifically within the realm of invoicing and financial data systems. The opportunity was posted on August 3, 2026, with submissions due by August 13, 2026, and is issued under the ASC Commodities Division of the Department of Defense, where performance is expected to align with federal electronic invoicing standards and system requirements, regardless of a specified physical location. All bidders must demonstrate proven capability in WAWF integration, proper FAR clause representation, and the technical infrastructure to handle secure, compliant electronic invoicing for government contracts.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541380
New
DIBBS
Military-Grade Inspection and Acceptance ServicesThe contract requires comprehensive origin-based inspection and acceptance testing for critical components, strictly adhering to MIL-STD-1916 or ASQ Z1.4 standards with an AQL of 0.1 for critical defects, ensuring the highest level of quality control. Full traceable reporting must be maintained throughout the process, documenting every inspection step and result with complete accountability and data integrity. This work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense contracting. The procurement falls under NAICS code 541380, indicating technical and scientific consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 3, 2026, with a firm response deadline of August 13, 2026, leaving a ten-day window for qualified small businesses to submit proposals. Although the place of performance and point of contact details are unspecified, the contract is accessible via the DIBBS portal, and performance expectations center on precision testing and documentation to meet military-grade quality requirements without deviation.
Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 322291
New
DIBBS
Defense Logistics Agency (DLA) Compliance Packaging and Preservation ProviderThe contract requires a small business to provide full packaging, preservation, and labeling services that meet military standards, specifically MIL-STD compliance, with an emphasis on mercury-free methods for environmental and safety compliance. All work must adhere to Defense Logistics Agency requirements, including the application of barcoding and precise container marking to ensure traceability and logistical efficiency across the supply chain. Services must be performed under a Total Small Business Set-Aside, restricting eligibility exclusively to small businesses certified by the SBA, and is classified under NAICS code 322291, which pertains to other paper product manufacturing. The solicitation is issued by the ASC Commodities Division within the Department of Defense and is open for response until August 13, 2026, with a posting date of August 3, 2026. Performance location details are unspecified, but all work must satisfy federal defense logistics standards without exception.
Sanitary Paper Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334511
New
DIBBS
Qualified Product/Manufacturer Sourcing AgentThe contract seeks a qualified small business to source defense-compliant electronic components in accordance with MIL-DTL-24779D specifications and H02 clause requirements, ensuring all products originate exclusively from manufacturers or suppliers listed on the Qualified Products List or Qualified Manufacturers List. The role involves identifying, vetting, and procuring components that meet stringent military standards, with the expectation that all sourcing activities adhere to the technical and compliance frameworks established by the Department of Defense. The effort is classified as a total small business set-aside under FAR 19.5, restricting eligibility exclusively to small businesses as defined by the SBA, with the NAICS code 334511 indicating the industry focus on electronic component manufacturing. The solicitation, issued by the ASC Commodities Division under the Department of Defense, requires full responsiveness to the referenced specifications and compliance with all associated military standards. Responses are due by August 13, 2026, and the contract will be executed as a subcontract. While no point of contact or physical performance location is provided, the work is expected to support defense electronics supply chains through rigorous supplier qualification and component sourcing processes. All activities must ensure traceability, authenticity, and regulatory alignment with current DoD procurement guidelines.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details