Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturing of USMA Breast and Waist Plates

Active

Federal

Response Deadline10/29/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This small business set-aside subcontract involves the fabrication, polishing, and finishing of military insignia buckles, specifically USMA breast and waist plates, for prime contractors supporting the Department of Defense at W6QM Micc-West Point. The scope of work requires the use of precision stamping or casting equipment to drape waistplates to a 3.5 inch radius, applying mirror-polished fronts with matte backs and edges, and adding necessary identification markings. All production must strictly adhere to MIL-B-1563, MIL-DTL-1563/12B, and MIL-DTL-1563/13B standards. The project is categorized under NAICS code 332710 and will be performed in West Point, New York. Interested parties should note the tight turnaround for responses, with a posting date of October 26, 2026, and a deadline of October 29, 2026. The final deliverable consists of fully finished and packaged breast and waist plates meeting all specified military requirements.

General Info

Subcontract for fabricating and finishing military insignia buckles meeting strict DoD standards.

Agency

Department Of Defense → W6QM Micc-West Point

NAICS

332710 - Machine Shops

Place of Performance

West Point, NY, 10996, USA

Set-Aside

SBA

Documents

This scope was carved out of W911SD-27-Q-A009.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SOURCES SOUGHT-U.S. Army United States Military Academy (USMA), Cadet Issued Breast and Waist Plates

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineOct 29

Submission deadline

Response Deadline

10/29/2026, 04:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QM Micc-West Point

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W6QM Micc-West Point

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates, polishes, and finishes military insignia buckles for prime contractors on U.S. Army W6QM Micc-West Point projects. Drapes waistplates to a 3-1/2 inch radius, applies mirror-polished fronts and matte backs/edges, and adds identification markings. Uses precision stamping or casting equipment per MIL-B-1563, MIL-DTL-1563/12B, and MIL-DTL-1563/13B standards. Delivers finished, packaged USMA Breast and Waist Plates.

Similar Contracts

Same NAICS industry code

Supply of Certified Materials for CB Safety DeviceThis subcontract involves the supply of certified raw materials, including metals, plastics, and electrical components, for the CB Safety Device under the Navsup Weapon Systems Support Mech. All provided materials must strictly adhere to TDP Version 011 properties and be guaranteed free of mercury and hexavalent chromium. The supplier is responsible for delivering these materials to the manufacturer along with necessary certifications of conformance and material test reports. Managed by the Department of Defense under NAICS code 332710, the opportunity was posted on October 26, 2026, with a response deadline of November 23, 2026. The primary objective is to ensure that prime contractors receive high-quality, compliant raw materials that meet rigorous military specifications for weapon systems support.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

Component Parts Fabrication for Modification Kit, AIThis subcontract through DLA Aviation involves the manufacture of individual component parts for aviation modification kit projects. The selected provider will be responsible for the machining, fabrication, and forming of aviation-grade alloys, specifically delivering finished component parts for NSN 1680-01-673-9058. Work must be performed using precision CNC machining and rigorous quality control inspection equipment to ensure all parts meet strict military specifications. To be eligible, contractors must hold AS9100 or ISO 9001 certification. This opportunity falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by November 2, 2026.

POSTED

about 8 hours ago

DEADLINE

Precision Machining of Valve Stem GuidesThis subcontract involves the precision machining and fabrication of 54 Valve Stem Guides for prime contractors supporting Navsup Weapon Systems Support Mechanicsburg projects. The contractor must manufacture components according to TDP Version No. 008 specifications using SAE AMS 5643 material, with a strict prohibition against the cold-forming of internal threads. Additionally, the contractor is responsible for executing production representative specimens for First Article Testing. To qualify for this project, the provider must hold ISO-9001 and ISO-10012 certifications, as well as mercury-free certification. The opportunity is categorized under NAICS code 332710 and is associated with the Department of Defense. Responses for this requirement are due by December 3, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

SERVOVALVE,AIRCRAFT

Solicitation # SPRPA127QVA04

Solicitation SPRPA127QVA04 is issued by the Defense Logistics Agency (DLA) Aviation office in Philadelphia for the procurement of aircraft servovalves. This fixed-price solicitation, issued under Emergency Acquisition Flexibilities, requires delivery within 90 days. The government intends to make a single award based on a primary evaluation of past performance and a secondary evaluation of price. The contracting officer will also utilize the Supplier Performance Risk System (SPRS) to assess item, price, and supplier risks. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1 for preservation, MIL-STD-129 for marking, and MIL-STD-130 for item unique identification. Inspection and acceptance will occur at the origin. All invoicing and payment processing must be conducted electronically through the Wide Area Workflow (WAWF) system. Compliance with the Buy American Act, cybersecurity standards under DFARS 252.204-7012, and specific requirements for Critical Safety Items (CSI) and Engineering Change Proposals are required. Offerors must be registered in the System for Award Management (SAM) and are encouraged to provide economic purchase quantity recommendations and current price lists to establish fair and reasonable pricing.

Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

TAHEF 542 System Components

Solicitation # N6660426Q0430

The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) is soliciting quotations for the procurement of custom build-to-print system components under solicitation N6660426Q0430. This unrestricted requirement, categorized under NAICS 332710 for Machine Shops, involves the manufacture and delivery of a Capstan Drive Assembly and a Stowage Drum/Level Wind Assembly. The procurement consists of 52 line items, including various drums, hubs, brackets, and guides. The government intends to award a single Firm Fixed Price purchase order based on the Lowest Price Technically Acceptable (LPTA) criteria, with delivery required F.O.B. Destination to Naval Station Newport, Rhode Island. Technical acceptability requires offerors to submit a Welding Certification Letter or a detailed plan to achieve qualification during performance. Contractors must adhere to strict quality and marking standards, including MIL-STD-130 for stamping and laser engraving, and provide essential documentation such as Certificates of Compliance, Mercury Free Statements, and Certificates of Analysis for raw materials. Security and cybersecurity compliance are mandatory, requiring a valid NIST SP 800-171 score posted in the Supplier Performance Risk System (SPRS) to access technical drawings, as well as adherence to NISPOM and SECNAV security protocols. Payment will be processed electronically via Wide Area Workflow (WAWF).

Nuwc Division Newport

POSTED

about 8 hours ago

DEADLINE

16--FIBER OPTIC ADAPTER - AND OTHER REPLACEMENT PARTS

Solicitation # N0038326QPD07

Solicitation N0038326QPD07, issued by NAVSUP Weapon Systems Support Philadelphia, seeks quotes for the procurement of critical replacement parts, including a fiber optic adapter, a BS test paddle, and a footstool nut tool. These items are designated as critical material because they support shipboard systems for aircraft launch and recovery, where failure could result in serious injury, loss of life, or loss of vital aircraft and systems. The government intends to make a single fixed-price award based on the most advantageous offer, prioritizing past performance over price. The evaluation process will utilize the Supplier Performance Risk System to assess item, price, and supplier risks. The contract requires strict adherence to technical specifications, including markings per MIL-STD-130 and packaging per MIL-STD-2073. For the test paddle, non-destructive testing must be performed by NADCAP accredited companies or laboratories satisfying ISO 17025. Deliveries are required within 90 days, with early and incremental shipments preferred. Inspection and final acceptance will occur at the contractor's location. Payment will be processed electronically through the Wide Area Workflow system. The submission deadline for quotations is November 23, 2026, following an extension provided in Amendment 0001.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

59--JUNCTION BOX

Solicitation # N0010423QFD03

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a Pressure Proof Junction Box (NSN 3HD 5975-01-663-2792 D4) intended for use in crucial shipboard systems. Due to the high risk associated with material failure, the item is designated as Special Emphasis material, requiring strict adherence to quality assurance standards, including ISO 9001, ISO 10012, and ISO/IEC 17025. The contract is a total small business set-aside and will be awarded to a single offeror based on a trade-off between past performance, which is weighted more heavily, and price. The technical requirements mandate compliance with Dry Deck Shelter specification S-5486639-1 and include strict controls on welding, brazing, and thread inspection. Key deliverables include the submission of weld procedure and qualification data within 120 days of award, a destructive First Article Test (FAT) on one unit, and a final delivery timeline of 440 days. Quality assurance is performed at the source by the DCMA Quality Assurance Representative, and all invoicing and certification data must be processed through the Wide Area Workflow (WAWF) system. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with shipments delivered on an FOB Destination basis.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

Supply of Durable Metallic Identification TagsThis subcontract with Pakistan Refinery Limited involves the manufacture and supply of durable metallic identification tags designed for equipment identification and certification tracking. These tags must be constructed from materials capable of withstanding harsh refinery and terminal environments and must support stamping or engraving for critical data, including identification numbers, test status, inspection dates, and expiry dates. The selected provider will be responsible for delivering the physical tags directly to the prime contractor or the designated project site in Pakistan. Interested parties should note that the response deadline for this opportunity is November 2, 2026.

Pakistan Refinery Limited

POSTED

about 13 hours ago

DEADLINE

CARC Painting ServicesThis subcontract for CARC Painting Services involves performing Chemical Agent Resistant Coating painting for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Opns. The scope of work requires the surface preparation and application of MIL-SPEC CARC paint in strict accordance with MIL-S-62272B(AT) paragraphs 3.7, 3.7.2, and 3.7.3. The final deliverable for this project is 13 CARC-painted vehicle body stakes. To execute this contract, the provider must utilize CARC-certified spray booths and specialized application equipment. The work is to be performed in Texarkana, Texas, under NAICS code 332710. Interested parties must adhere to the response deadline of November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Machining and Fabrication of Mounting Plate (NSN 5340-01-660-9996)This subcontract involves the precision machining and fabrication of a mounting plate, identified by NSN 5340-01-660-9996, for the DLA Weapons Support Land Supply Chain. The selected contractor will be responsible for performing machining and forming in strict accordance with Army drawings and quality assurance plans, utilizing precision CNC equipment. The scope specifically excludes additive manufacturing and requires that all materials used are compliant with the Buy American Act and the Berry Amendment. To ensure security and quality, the contractor must hold JCP certification to access ITAR and EAR technical data. The final deliverable consists of one unfinished mounting plate accompanied by a Certificate of Quality Compliance. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Gland Nut Assembly (NSN 5310011045583)This subcontract involves the manufacture and supply of one Gland Nut Assembly, identified by NSN 5310011045583, for prime contractors under DLA supply contracts. The work is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division. The contractor is required to fabricate the assembly using either precision machining or approved additive manufacturing techniques, ensuring strict adherence to Reference Drawing NR 98897 STP51–400 Rev E and Reference Drawing NR 98747 201416605 Rev F. The scope of work includes the delivery of one completed and inspected unit along with a certification of conformance to the specified technical drawings. This procurement falls under NAICS code 332710. The solicitation was posted on October 25, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of Spring Relief GuidesThis subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture and supply of 8,000 steel Spring Relief Guides (NSN 4820011741291). The project involves precision machining of steel components to meet strict technical specifications, with final delivery subject to destination inspection per FAR 52.246–2. Performance will take place in New Cumberland, Pennsylvania. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710. A critical requirement of the contract is strict compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information. The response deadline for this solicitation is November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QM Micc-West Point

Same awarding agency

Supply of Yellow Brass 65/35 (UNS Alloy C-268)This subcontract involves the procurement and delivery of raw Yellow Brass 65/35, specifically UNS Alloy C-268, to support prime contractors on U.S. Army W6QM Micc-West Point projects. The selected provider is responsible for sourcing and delivering brass sheets or stock that strictly adhere to purity and composition standards. To ensure full compliance with MIL-B-1563 material requirements, the supplier must provide all necessary Mill Test Reports and material certifications. The opportunity is designated as a total Small Business Set Aside under NAICS code 331210 and is managed by the Department of Defense for performance in West Point, New York. Interested parties must adhere to the response deadline of October 29, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 8 hours ago

DEADLINE

SOLICITATION - U.S. Army West Point India White Coats, Trousers, Dresses

Solicitation # W911SD-26-Q-A114

The Mission and Installation Contracting Command West Point is soliciting quotes for a multi-year, firm-fixed-price contract to manufacture India White coats, trousers, and skirts for male and female cadets at the United States Military Academy. This procurement is a 100 percent set-aside for total small business concerns under NAICS code 315210. The contract features an ordering period from November 1, 2026, through October 31, 2033, with an initial delivery estimated for May 2027. A unique material sourcing arrangement is in place where the government provides all fabric and associated materials as government furnished items during the base year, while the contractor becomes solely responsible for sourcing all materials during the option years. The award will be based on the lowest price source selection, provided the offeror passes a technical evaluation of required samples for each garment type. All quotes must be submitted electronically via email to the designated point of contact by November 16, 2026, at 2:00 PM EST, which is also the strict deadline for the receipt of physical samples. Technical requirements are governed by specific product descriptions and military standards, including mandatory first article testing for the base year's first delivery order. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

Cut and Sew Apparel Contractors

POSTED

about 8 hours ago

DEADLINE

SOLICITATION Cadet Swords USMA West Point

Solicitation # W911SD-27-Q-A002

The Mission and Installation Contracting Command Installation Contracting Office at West Point, NY, is soliciting quotes for the manufacture and delivery of Cadet Sabers, including scabbards and covers, for graduating cadets of the United States Military Academy. This requirement is a 100 percent set aside for total small business concerns under NAICS code 332215. The procurement is structured as a firm fixed price contract consisting of a base year for approximately 1,700 sabers and two subsequent option periods. The base period delivery date is firmly set for April 12, 2027, with subsequent years ending on December 4. Technical requirements are governed by Purchase Description WP-PD-26-02 and specific design diagrams, requiring materials such as stainless steel and gold plating per MIL-DTL-45204, with covers in West Point Gray (Pantone Cool Gray 5 C). Award will be based on a lowest price source selection process where technical compliance is evaluated on a pass/fail basis. To be considered, offerors must submit one complete sample sword assembly and a two-yard fabric sample by the firm closing date of October 30, 2026. Final acceptance is subject to first article inspection and conformance sampling per ASQ/ANSI Z1.4 at West Point, NY. All items must include unique item identification in accordance with MIL-STD-130 and MIL-STD-129.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 8 hours ago

DEADLINE

SOURCES SOUGHT-U.S. Army United States Military Academy (USMA), Cadet Issued Breast and Waist Plates

Solicitation # W911SD-27-Q-A009

The U.S. Army is issuing a Sources Sought notice for the procurement of Cadet Issued Breast and Waist Plates for the United States Military Academy at West Point. This is an information and planning effort to determine if there are at least two qualified small businesses capable of fulfilling the requirement to support a small business set-aside. The anticipated contract structure consists of a base year plus four one-year option periods under NAICS code 315990 for Apparel Accessories and Other Apparel Manufacturing. The technical requirements specify that both the breastplates and waistplates must be manufactured from Yellow Brass 65/35 (UNS Alloy C-268) with mirror-like polished fronts and matte finish backs and edges. These items must adhere to MIL-B-1563, MIL-DTL-1563/12B for waistplates, and MIL-DTL-1563/13B for breastplates. Specific dimensions and thicknesses are required, and identification markings must be placed on the back of each buckle. Packaging must follow standard commercial guidelines, with each item wrapped and packed 50 units per box. Interested firms must provide their company details, small business status, and evidence of previous experience with similar requirements to facilitate a capability determination.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 8 hours ago

DEADLINE

Synopsis -Solid Wood Hangers B+4 West Point FY 27

Solicitation # W911SD27QA003

The Mission and Installation Contracting Command Installation Contracting Office at West Point, NY, is soliciting quotes for 17 inch solid hardwood coat and suit hangers for United States Military Cadets. This is a re-compete requirement structured as a base year plus four option years, with an annual quantity of 20,250 hangers. The procurement is 100 percent set aside for small businesses under NAICS code 321999. All quotes and required documentation must be submitted via the Unison Marketplace by October 27, 2026, at 4:30 pm Eastern Time. Technical specifications require the hangers to be constructed from sturdy, semi-polished natural hardwood with a curved body to preserve garment shape. Key dimensions include a width of approximately 17.5 inches, a thickness of 7/16 to 9/16 inch, and a total height of at least 9.625 inches. Each hanger must feature a metal chrome hook, a non-slip wooden trouser bar without a metal retaining bar, and notches for strap garments. Products must be delivered in secure bundles or boxes of 18 units, labeled with the nomenclature and quantity. Strict compliance with the Buy American Act is mandatory, and any products originating from China or other non-compliant countries will result in immediate disqualification. To be considered for award, offerors must submit detailed color photos specifying the wood type, dimensions, and country of origin. Failure to provide these photo samples or adhere to the Buy American certification will lead to exclusion from the award process.

All Other Miscellaneous Wood Product Manufacturing

POSTED

DEADLINE

Cadet Cufflinks West Point FY27

Solicitation # W911SDQA007

The U.S. Army West Point, through the W6QM MICC-West Point, is issuing a Sources Sought notice for the procurement of Cadet Cufflinks (Insignia, U.S.M.A., Button, Cuff) and Women's Over Blouses. The government intends to set this requirement aside for small businesses, provided at least two qualified small businesses across various socioeconomic categories, including 8(a), HUBZone, SDVOSB, and WOSB, respond with sufficient capability information. The anticipated NAICS codes for these requirements are 315210 for Cut and Sew Apparel and 339993 for the cufflinks. The procurement for cufflinks includes a base quantity of 2,964 units per year with four option years. The cufflinks must be manufactured from Red Brass 85/15 (UNS Alloy No. C-230) with a nickel-plated, gold-plated, matte finish and burnished highlights, adhering to MIL-DTL-1563/15B and MIL-B-1563 standards. Packaging requirements specify that two cuff buttons must be mounted on a card inside a plastic box, with intermediate packaging consisting of 100 mounted cards per box. Identification markings must be placed on the underside of the cuff button face. Interested firms must provide their company details, UEI, CAGE code, small business status, and evidence of previous experience on similar requirements to Sonya Van Valkenburg by October 27, 2026.

Fastener, Button, Needle, and Pin Manufacturing

POSTED

DEADLINE

Manufacturing and Supply of Women's Over BlousesThis subcontract involves the manufacturing and supply of Women's Over Blouses for prime contractors supporting W6QM MICC-West Point projects under the Department of Defense. The selected provider will utilize industrial sewing and cutting equipment and apparel-grade textiles to produce the garments in strict accordance with government specifications. The opportunity is designated as a total Small Business Set Aside under NAICS code 315210, with performance taking place in West Point, New York. Interested parties must respond by October 27, 2026, to be considered for the delivery of the completed apparel.

Cut and Sew Apparel Contractors

POSTED

DEADLINE

Manufacturing and Supply of U.S.M.A. Cadet CufflinksThis subcontract involves the manufacturing and supply of U.S.M.A. Cadet cufflinks for prime contractors supporting W6QM MICC-West Point projects. The contractor is responsible for fabricating the buttons using Red Brass 85/15 with a nickel-plated, gold-plated, matte finish and burnished highlights. All products must feature identification markings that comply with MIL-DTL-1563/15B and MIL-B-1563 standards, with final delivery consisting of buttons mounted on cards and housed in plastic boxes. The opportunity is designated as a total Small Business Set Aside under NAICS code 339993 for the Department of Defense. Performance will take place in West Point, New York. Interested parties must adhere to the response deadline of October 27, 2026.

Fastener, Button, Needle, and Pin Manufacturing

POSTED

DEADLINE

Wooden Coat and Suit Hanger Manufacturing and SupplyThis subcontract opportunity, managed by the Department of Defense for W6QM Micc-West Point, involves the manufacturing and supply of high-quality hardwood coat and suit hangers for prime contractors working on US Army West Point procurement projects. The required hangers must be fabricated from sturdy hardwood with a natural, semi-polished finish, featuring chrome hanging hooks and non-slip wooden trouser bars without metal retaining bars. All products must comply with the Buy American Act under FAR 52.225-1, and the contractor is responsible for delivering both the finished hangers and pre-award physical samples and specifications. The project is designated as a Total Small Business Set Aside under NAICS code 336612, with the place of performance located in West Point, New York. Interested parties must adhere to the response deadline of October 27, 2026. This procurement ensures that the specific material and design standards are met to support the operational needs of the military installation.

POSTED

DEADLINE

Cadet Sabers (CL 2031) SupplyThis subcontract, managed by the Department of Defense for W6QM Micc-West Point, requires the manufacture or sourcing of 1,700 ceremonial Cadet Sabers. The production must strictly adhere to the CL 2031 design requirements and the refined specifications, drawings, and photos dated October 16, 2026, specifically regarding the steel, hilt, and scabbard materials. The project is designated as a total Small Business Set Aside under NAICS code 315210, with performance taking place in West Point. All 1,700 completed sabers must be delivered by the final deadline of April 12, 2027.

Cut and Sew Apparel Contractors

POSTED

DEADLINE

Garment Inspection and Quality ControlThis subcontract opportunity, titled Garment Inspection and Quality Control, is issued by the Department of Defense through W6QM Micc-West Point. The project requires independent quality assurance and inspection services for manufactured blouses intended for US Army uniform projects. The selected contractor will be responsible for ensuring strict compliance with the Revised Women's Overblouse Purchase Specification by performing dimensional checks against size charts, verifying seam strength, and conducting visual color match checks for White 521 using light boxes and spectrophotometers. The scope of work culminates in the delivery of detailed inspection reports and certifications of compliance. This is a total Small Business Set Aside under NAICS code 541380, with the place of performance located in West Point, New York. The solicitation was posted on October 16, 2026, and the deadline for responses is November 12, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Army Shade White 521 Fabric SupplyThis subcontract opportunity, managed by the Department of Defense through W6QM Micc-West Point, involves the sourcing and delivery of white fabric and trims for prime contractors working on US Army uniform projects. The selected provider will supply bolts of fabric, buttons, thread, and interfacing that strictly adhere to the technical and visual specifications of Army Shade White 521, specifically meeting the Revised Women's Overblouse Purchase Specification. The project is designated as a total Small Business Set Aside under NAICS code 313310, with performance taking place in West Point, New York. Interested parties must submit their responses by November 12, 2026, following the posting date of October 16, 2026.

Textile and Fabric Finishing Mills

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS