Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BUSHING, SLEEVE

Active
SPE4A6-26-T-11VNFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 10 units of a BUSHING, SLEEVE with NSN 3120-01-171-0041 and part number 12284312, sourced under solicitation SPE4A6-26-T-11VN. The item is classified as a critical application component and is subject to stringent technical and quality controls, including compliance with the DLA Master List of Technical and Quality Requirements, TDP Rev A Gen 1 per drawings 19207 12284312 and 19207 12286054, and adherence to QAP-13873. Cybersecurity requirements mandate CMMC Level 2 self-assessment and handling of covered defense information. The item must be manufactured and packaged in strict accordance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and packed in unit containers E5 using preservation method 33, drying agent 49, and wrapping material GB. Inspection and acceptance occur at origin with no quantity variance permitted. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. Delivery is FOB origin with a required delivery date of April 27, 2027, and a need ship date of January 31, 2027. Packaging and palletization must conform to DLA packaging requirements, and the shipment must be sent to the DDSP New Cumberland facility in Pennsylvania. The contract is managed by the ASC Commodities Division under the Department of Defense, with Kameron Heningburg as the primary point of contact.

General Info

Procure 10 bushing sleeves NSN 3120-01-171-0041, FOB origin, delivery April 27, 2027, CMMC Level 2, MIL-STD compliant.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11VN.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Kameron Heningburg
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUSHING,SLEEVE
BUSHING, SLEEVE
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Source/Design controlled material
USA Tank and Automotive Command Cage: 19207 P/N: 12284312
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 12284312 REVISION NR L DTD 08/08/1992 PART PIECE NUMBER: 12284312
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 QAP-B02 REVISION NR B DTD 12/11/2013 PART PIECE NUMBER:
SPE4A6-26-T-11VN
SECTION B
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 12286054 REVISION NR A DTD 04/28/1982 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017742412 0001 EA 10.000
NSN/MATERIAL:3120011710041
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
SPE4A6-26-T-11VN
SECTION B
PR: 7017742412 PRLI: 0001 CONT’D
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/31/2027 Original Required Delivery Date:04/27/2027
SPE4A6-26-T-11VN NSN/Part Number: 3120-01-171-0041 Quantity: 10 EA Purchase Request: 7017742412QTY: 10 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BEARING, PLAIN, SPHER
Solicitation # SPE4A6-26-T-12LE
This contract specifies the procurement of 14 spherical plain bearings under NSN 3120-01-576-6374 and part number 5136L017-1 from Circor Aerospace, Inc. DBA 50601, with delivery required within 264 days FOB origin. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, with specific preservation methods determined by bearing type and closure, as outlined in referenced tables and paragraphs. Protective lubricants and preservation controls are dictated by bearing specifications, and the contractor’s packaging facility must meet quality assurance verification criteria. Unit of issue is each, with zero tolerance for quantity variance, and inspection and acceptance occur at destination. Item Unique Identification is not required per customer request, and all marking must follow specified standards without special codes. The solicitation number is SPE4A6-26-T-12LE, issued by the ASC Commodities Division of the Department of Defense, with a response deadline of August 12, 2026, and performance location at Hill AFB, Utah.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, ROD END
Solicitation # SPE4A6-26-T-11XN
This contract pertains to the procurement of 190 units of a plain rod end bearing with NSN 3120-01-203-4442 and part number BACB10Z4LT, manufactured to the specifications of Boeing drawing BACB10Z Revision N dated January 17, 2012. The item is classified as a source/design control item, and only approved sources listed with their respective CAGE codes are authorized to supply, including U S Bearings, Timken Aurora Bearing Company, New Hampshire Ball Bearings Inc, RBC Transport Dynamics Corp, Sargent Aerospace & Defense, Roller Bearing Company of America Inc, RBC Specline Inc, and RBC Southwest Products Inc. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Compliance with MIL-STD-2073-1E and MIL-DTL-197M is mandatory for preservation, packaging, packing, and marking, with specific procedures dictated by bearing type and closure, including protective lubricant selection and process controls outlined in the standard. Packaging must adhere to DLA requirements, and all items must be marked according to MIL-STD-129 with no government identification removed from non-accepted supplies. Inspection and acceptance are to occur at origin, with no variance allowed in quantity. Unit of issue is each, delivered FOB origin within 171 days. The contract is a total small business set-aside under NAICS code 332991, issued by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, ROD EN
Solicitation # SPE4A6-26-T-12LA
The contract pertains to the procurement of a single plain rod end bearing identified by NSN 3120-01-055-8453, with a delivery requirement of 170 days after order. Technical specifications mandate that all Class 3A and 3B threads must be gaged in accordance with SAE AS8879 Category 1 or meet the definition of safety critical threads per MIL-S-7742, excluding self-locking nuts and internal threads under .190 inches diameter or external threads under .138 inches diameter. The item is subject to stringent quality and technical requirements outlined in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Export control regulations under ITAR or EAR apply to associated technical data, restricting disclosure to foreign persons, including foreign nationals within the U.S., and requiring prior government authorization for any export or transfer. Only DLA contractors with approved US/Canada Joint Certification Program status, completed export control training, and cleared access through the DLA questionnaire may handle the controlled data. Item Unique Identification is not required as specified by the Service customer, in alignment with DFARS 252.211-7003(c)(1)(i). Packaging must comply with DLA standards, inspections are to be performed at origin, and government identification must be removed from non-accepted supplies. The solicitation, issued under SPE4A6-26-T-12LA, was posted on August 4, 2026, with a response deadline of August 12, 2026, under NAICS code 332991 for other fabricated metal product manufacturing, and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
PADDED DIVIDER SET
Solicitation # SPE8EN-26-T-2769
The contract outlines the procurement of a Padded Divider Set with NSN 6760-01-491-3410, requiring one unit to be delivered within 20 days FOB origin. The item is to be packaged in strict compliance with ASTM D3951 and all applicable DLA Master List of Technical and Quality Requirements, with marking and labeling conforming to MIL-STD-129. Palletization must adhere to RP001 packaging standards, and no parcel post is permitted—shipment must occur via the fastest traceable means. The delivery address is Fort Campbell, Kentucky, with the shipment designated as RDD 555 under project TP 3 and supplier code W9046W. The unit of issue is each, with zero tolerance for quantity variance. The contract prohibits submission of technical data requests to DLA Troop Support due to the absence of an approved technical data package. The item does not involve ozone-depleting substances, and covered defense information may apply. Delivery is set for August 5, 2026, with the solicitation issued under SPE8EN-26-T-2769. The point of contact is Jennifer Esworthy, and the acquisition falls under NAICS code 332991, administered by the Department of Defense’s Construction & Equipment T&I FO Equipment office.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-11RC
This contract solicits the procurement of an annular ball bearing with the NSN 3110-00-554-3244, requiring exactly 17 units to be delivered within 171 days under the solicitation number SPE4A6-26-T-11RC. The bearing must be manufactured in the United States, its outlying areas, or Canada, and the cost of all bearing components—rolling elements, retainer, inner race, and outer race—produced in those regions must exceed 50 percent of the total component cost, in strict compliance with DFARS Clause 252.225-7016. A Contractor’s Declaration regarding the domestic or foreign origin of materials is mandatory and must be submitted upon request; failure to provide it may disqualify the quote. If no offerings meet the domestic sourcing requirement, the solicitation may be cancelled or held pending a waiver approval under DFARS 225.7009-4. The bearing must comply with detailed technical and quality specifications referenced by R-numbers, including TDP Rev A Gen 1 per CID A-A-59583D and QAP-13873, and is classified as a critical application item subject to specific physical marking requirements. Packaging and preservation must follow MIL-DTL-197M and MIL-STD-2073-1E, with preservation methods, lubricants, and packaging procedures tailored to bearing type and closure. All packaging must adhere to DLA’s requirements, including proper marking per MIL-STD-129, palletization guidelines, and absence of mercury compounds except for specific authorized uses as defined by NAVSEA. The item is delivered FOB origin with zero variance allowed in quantity, inspected and accepted at origin, and unit of issue is each. No Item Unique Identification is required. The solicitation is issued by the Department of Defense’s ASC Commodities Division, with response deadlines set for August 12, 2026, and primary contact information provided for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BALL, BEARING
Solicitation # SPE4A6-26-T-12DR
The contract is for the procurement of 19 ball bearings, identified by NSN 3110015935726 and part number 5911379, manufactured to meet MIL-DTL-197M specifications. The item is classified as a commercial item and is designated as a critical application component for Hamilton Sundstrand Corporation. All bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50% of the total cost of bearing components originating from these regions, per DFARS clause 252.225-7016. Contractors are required to submit a formal declaration regarding the domestic or foreign origin of materials, and failure to provide this documentation will disqualify their quote. The solicitation may be canceled or held pending a waiver if no compliant offers are received. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with preservation methods determined by bearing type and closure per MIL-DTL-197M, including specified protective lubricants and quality assurance verification. Sampling shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise allowed. Technical and quality requirements are governed by the DLA Master List, and measuring and test equipment must meet applicable standards. Delivery is FOB origin within 171 days, with inspection and acceptance occurring at the destination. No unit identification marking is required per customer request, and the item is subject to procurement restrictions outlined in the DoD’s foreign bearing waiver policy.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, ROD END
Solicitation # SPE4A6-26-T-11XH
This contract specifies the procurement of a plain rod end bearing identified by part number L31302G02 and NSN 3120-01-455-1641, with a quantity of five units to be delivered FOB origin within 171 days. The item is classified as a commercial item and must conform strictly to the referenced drawing and technical requirements outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Full compliance with MIL-STD-130N for item identification is required, though unique item identification is waived per customer request. The bearing must be preserved, packaged, and marked in accordance with MIL-DTL-197M and MIL-STD-2073-1E, including specified protective lubrication based on bearing type and closure, and packaging must meet DLA standards with proper preservation methods, cushioning, and marking per MIL-STD-129. Mercury and mercury-containing compounds are prohibited in or on the item except for specific functional applications as defined by NAVSEA, and portable devices containing mercury must include a secondary containment and be shock-proof. The contractor must adhere to tailored quality requirements, including configuration change management, inspection and acceptance at origin, and removal of government markings from non-accepted items. The item is designated as a critical application component and requires physical identification marking as specified. Unit price is $5.00 per unit for a total of $25.00, and all documentation, packaging, and technical compliance are governed by stringent DoD standards with no variance permitted unless formally approved.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-11XR
The contract specifies the procurement of a bushing sleeve identified by part number B5W-28829-27 and NSN 3120-01-466-1050, with a quantity of 19 units to be delivered FOB origin within 171 days. All supplies must comply with DLA’s master list of technical and quality requirements referenced by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA’s packaging standards, including marking per MIL-STD-129 with no special marking codes. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively; zero non-conformances are required unless otherwise stated. Mercury and mercury compounds are strictly prohibited from intentional addition or direct contact with the hardware, except in specific functional applications like batteries and sensors as defined by NAVSEA, and portable devices containing mercury must include a secondary containment. Preservation, packaging, and marking are further restricted from containing mercury under IP056. The item is designated as a critical application, and all documentation must align with the referenced QAP-13873, Revision B dated 12/11/2013. Delivery must be made to the designated reception warehouse in Tracy, California, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract includes specific transportation guidelines referenced in DLAD proc notes C19 and C20, and the unit of issue is EA as defined by DLA standards.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
PLATE, RETAINING, BEA
Solicitation # SPE4A6-26-T-12JL
The contract is for a single retaining plate bearing, identified by NSN 3110-01-209-7824, with a delivery requirement of 20 days after contract award. The solicitation number is SPE4A6-26-T-12JL, issued on August 4, 2026, with responses due by August 12, 2026. The contract is classified under NAICS code 332991 and is managed by the ASC Commodities Division of the Department of Defense, with performance required in Austin, Texas, ZIP 78703-1222. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicable revisions determined by the solicitation or award date based on acquisition size. The item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons anywhere, including U.S. subsidiaries or employees; compliance requires prior authorization from the Department of State or Commerce. Contractors must hold approved US/Canada Joint Certification Program status, complete mandatory training on DOD export-controlled data handling, and pass the DLA Export-Controlled Technical Data Questionnaire to access controlled information. DFARS 252.225-7048 applies to data protection. Government identification must be removed from non-accepted supplies, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Measuring and test equipment must meet specified standards. The primary point of contact is Tracy Fletcher, reachable at the provided phone and email.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A6-26-Q-1271
The contract pertains to the procurement of 20 units of a thrust washer bearing with NSN 3120-01-287-2159 under solicitation SPE4A6-26-Q-1271, with a response deadline of August 13, 2026, and a delivery requirement within 180 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition size. The item is subject to export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or export of associated technical data to foreign persons or entities, including foreign nationals within the United States, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program registration, have completed required DOD export control training and the DLA questionnaire, and have received explicit approval from the DLA authority. Additionally, packaging must meet DLA standards, non-accepted supplies must have government identification removed, inspection and acceptance may occur at origin, and the item is classified as covered defense information. The contracting activity is the Defense Logistics Agency’s Commodity Division, with point of contact Brea White reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332991
New
DIBBS
CONE, TAPERED ROLLER
Solicitation # SPE4A6-26-T-12KS
This contract specifies the procurement of a tapered roller bearing with NSN 3110-01-246-2455 and part number JD7386, quantities of 15 units, to be delivered within 57 days FOB origin with no tolerance for variance in quantity. The item is designated as a critical application and must comply with stringent technical and quality mandates from the DLA Master List of Technical and Quality Requirements, including inspection and acceptance at origin. Packaging must meet MIL-STD-2073-1E and MIL-DTL-197M standards, with preservation methods tailored to bearing type and closure, and marking required per MIL-STD-129. All packaging operations must adhere to DLA packaging requirements and quality assurance verification protocols. The bearing is subject to strict domestic sourcing restrictions under DFARS Clause 252.225-7016, mandating that the product be manufactured entirely in the United States, its outlying areas, or Canada, and that over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originate from these locations. Contractors must submit a formal declaration verifying compliance, obtainable from the DLA Foreign Bearing Waiver website; failure to provide this documentation will disqualify the quote. Mercury and mercury-containing compounds are prohibited from direct contact with the hardware except for specific enumerated functional applications like batteries or sensors, with portable fluorescent lamps and instruments requiring dual containment and shockproof design. The solicitation is issued under SPE4A6-26-T-12KS with a response deadline of August 12, 2026, and may be canceled or held if no compliant offers are received.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A6-26-T-12KM
The contract pertains to the procurement of eight thrust washers identified by NSN 3120-00-340-9507 and part number 365385-1, supplied by Aerocontrolex Group, Inc. Delivery is required within 171 days of contract award, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill in Hill AFB, Utah. The quantity is strictly fixed with zero variance allowed, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Packaging and palletization adhere to DLA’s comprehensive procurement standards, and all items must be prepared for shipment without government identification if rejected. Quality control requires sampling in accordance with MIL-STD-1916 or ASQ H1331, with zero non-conformances permitted unless otherwise specified, and critical attributes are subject to the most stringent verification levels. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, and the manufacturer must meet all documentation, equipment calibration, and source approval standards outlined in the contract. Transportation and shipping logistics are governed by DLA procedural notes, and the item is to be delivered by January 31, 2027, with an original required delivery date of March 14, 2027, under solicitation SPE4A6-26-T-12KM, managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332312
New
DIBBS
Supply of Fasteners (NSN 5307-01-212-4400)The contract pertains to the manufacture or supply of standardized fasteners identified by NSN 5307-01-212-4400, specifically for integration into defense systems. As a commercial item procurement, it mandates strict adherence to military specifications and federal supply chain standards to ensure compatibility, reliability, and interoperability within military equipment. The item falls under NAICS code 332312, classifying it as a manufacturing activity related to screw, bolt, and fastener production, and is being procured under a subcontract mechanism by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, providing vendors with a two-week window to submit proposals. While no specific place of performance or point of contact is detailed, the procurement is governed by the Defense Logistics Agency’s procurement framework, as indicated by the official DIBBS portal link. All suppliers must meet the defense sector’s quality, documentation, and delivery requirements without any set-aside provisions for small or disadvantaged businesses, emphasizing a competitive, open-market approach aligned with DoD supply chain objectives.
Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment Support
Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) Services
Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details