Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BUSHING, SLEEVE

Active
SPE4A6-25-T-37RWFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of three bushings, sleeves identified by NSN 3120-01-287-0280, under solicitation SPE4A6-25-T-37RW, with delivery required within 148 days of award. The item is classified as a commercial item, and the quality assurance requirements are governed by rigorous sampling standards, primarily MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances mandated in the sampled lot unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with corresponding AQLs of 0.1, 1.0, and 4.0, while unspecified attributes default to major status. The manufacturer may choose between attribute or variable inspection methods under MIL-STD-1916, and MIL-STD-105/ASQ Z1.4 may be used to determine sample size but not for acceptance criteria. Configuration changes require formal engineering change proposals or variance requests, and all measuring and test equipment must be calibrated and traceable. The technical data associated with this item is subject to export control under ITAR or EAR, prohibiting any disclosure to foreign persons without prior authorization from the Department of State or Commerce, with DFARS 252.225-7048 enforceable. Distribution is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, who have completed required training and questionnaire submissions. Inspection and acceptance occur at the manufacturer’s origin, and the item is subject to stringent control over its technical information by the Defense Logistics Agency.

General Info

Procure three NSN 3120-01-287-0280 bushings, delivery in 148 days, zero defects, ITAR/EAR controlled, DLA contractor only.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-25-T-37RW.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Quentin Mceachern
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUSHING,SLEEVE
BUSHING,SLEEVE
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICATION LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RD002, COVERED DEFENSE INFORMATION APPLIES
RT001: MEASURING AND TEST EQUIPMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3120-01-287-0280 Quantity: 3 EA Purchase Request: 7013332632QTY: 3 Delivery: 148 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BUSHING, SLEEVEThe contract pertains to the procurement of a bushing sleeve assembly, identified by part number 209-032-167-001 and NSN 3120015243968, with a quantity of 40 units to be delivered in five days FOB origin. The item is classified as a commercial item and is designated as a critical application item, necessitating strict compliance with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be verified at predefined levels corresponding to AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Packaging must follow MIL-STD-2073-1E with specific codes for preservation, wrapping, and unit containment, and marking must comply with MIL-STD-129 without special labeling. The delivery is to be shipped to a designated Turkish military facility via freight forwarder A.J. Worldwide Services, with the required delivery date set for July 27, 2026. All documentation, including source approval requests and configuration change management, must meet DLA procedures, and any deviations require formal engineering change proposals or variance requests. The contract is issued under solicitation SPE4A6-26-T-10CM with a purchase request number 7017599508 and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVEThe contract involves the procurement of 20 bearing sleeves with NSN 3120011668611, issued as a Total Small Business Set-Aside under FAR 19.5 and solicited under SPE4A6-26-T-06WH. Delivery is required FOB Origin on March 26, 2027, to the DLA Distribution San Joaquin warehouse in Tracy, California, with inspection and acceptance also occurring at the contractor’s origin facility. The item is designated a Critical Application Item, mandating enhanced quality controls and full traceability, while Item Unique Identification is expressly not required per DFARS 252.211-7003(c)(1)(i). Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements RP001, with marking adhering strictly to MIL-STD-129 and no special marking codes applied. Mercury or mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, packing, and marking, with narrow exceptions limited to functional uses in batteries, fluorescent lights, specific instruments, weapon systems, and NAVSEA-approved chemical reagents; portable mercury-containing devices must incorporate shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. All hazardous materials must be labeled per OSHA’s Hazard Communication Standard unless exempt under federal statutes, and contractor-submitted hazard labels and MSDS are required. Compliance with applicable DFARS and FAR clauses is mandatory, including those governing electronic payment submissions via WAWF, trafficking in persons, employment eligibility verification, sustainable products, safeguarding of covered contractor information systems, and NIST SP 800-171 assessment requirements. The contract includes clauses on contractor obligations for inspection, delivery defaults, unenforceable obligations, and accelerated payments to small business subcontractors, while transportation by U.S.-flag vessel is required unless waived. The solicitation is open only to certified small businesses, and offerors must provide accurate socioeconomic representations, including UEI and CAGE codes if applicable. No pricing details are provided in the solicitation, and the contract type has not been formally specified.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332991
New
DIBBS
BEARING, THRUST WASHThe contract pertains to the procurement of 20 units of a THRUST BEARING WASHER with NSN 3120-01-325-7628 under solicitation SPE4A6-26-T-10EJ, issued by the Department of Defense’s ASC Commodities Division. The item must conform to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specific adherence to revised drawing TDP Rev A Gen 1 per Basic Drawing 19207 12376120 and QAP-13873 QAP-B02. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special marking codes, and palletization as specified. Inspection and acceptance occur at origin, with a firm quantity requirement of exactly 20 units and no variance allowed. Delivery is FOB origin within five days of contract award, destined for the 2nd Supply Depot in Busan, South Korea, with freight handling governed by DLA procedural notes C19 and C20. Item Unique Identification is not required, as per DFARS 252.211-7003(c)(1)(i). The supplier must ensure all measuring and test equipment is calibrated and compliant with RT001 requirements, and all materials shipped must meet tailored higher-level quality requirements under RQ001. The required delivery date is June 25, 2026, and response submissions are due by August 5, 2026.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVEThe contract specifies the procurement of a sleeve bearing identified by part number HS5500-4 and NSN 3120-01-386-7700, with a required quantity of 109 units to be delivered within 96 days from the contract award. The item is designated as a critical application component and must be sourced exclusively from KAMATICS CORPORATION, identified by CAGE code 50632, as the approved supplier under the technical specifications tied to McDonnell Douglas Helicopter Company’s drawing HS5500 Revision D. Compliance with stringent quality and documentation requirements is mandated, including adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which encompass inspection at origin, packaging per MIL-STD-2073-1E and DLA-specific standards, and marking according to MIL-STD-129 with no special marking codes. Item Unique Identification is not required per the requesting service’s directive, and the item is exempt from shelf life restrictions. Delivery is FOB origin, with inspection and acceptance also occurring at the supplier’s facility. Packaging must conform to prescribed methods including enclosed unit containers, no cushioning material, and palletization per DLA guidelines. The shipment destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required need ship date of November 10, 2026, and an original required delivery date of November 25, 2026. The contract falls under solicitation SPE4A6-26-T-10DQ, with a fixed unit price of $109.00 per unit and zero variance permitted in quantity. All technical and quality controls are governed by referenced DLA and military standards, and transportation logistics are governed by applicable DLA procedural notes.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
SHOE ASSY, PLAIN CHROMEThis contract is for the procurement of four units of a Shoe Assembly, Plain Chrome Copper, identified by NSA 3110-01-224-9738, under solicitation SPE4A6-26-T-10AG. Delivery is required within 125 days of contract award to the DLA Distribution Depot in Bremerton, Washington, with shipment FOB origin and inspection and acceptance occurring at the destination. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, and palletization must adhere to DLA packaging requirements. The item must be mercury-free, prohibiting intentional addition or direct contact with mercury or mercury-containing compounds, except for specific functional uses like batteries or instruments as defined by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof with a secondary containment barrier. Bearing components must originate from the United States, its outlying areas, or Canada, with domestic content exceeding 50% of total bearing component costs, and contractors must submit a declaration of domestic sourcing compliance or risk disqualification. Packaging, preservation, and marking are strictly prohibited from containing mercury or mercury compounds. The contract incorporates technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality standards and measuring and test equipment specifications. Failure to provide the required bearing sourcing declaration may result in rejection of the quote. The original required delivery date is July 11, 2027, but the needed ship date is December 9, 2026, indicating urgency in the logistical timeline.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, CYLIThis solicitation seeks the procurement of 55 cylindrical roller bearings, NSN 3110-01-008-7937, part number 580274-1, designated as a commercial item and source-controlled, requiring manufacturing and testing in accordance with limited rights data accessible only to approved vendors. The bearings must be sourced exclusively from approved manufacturers—SKF USA Inc. (CAGE 38443) or Timken (CAGE 78118)—and must originate from the United States, its outlying areas, or Canada, with more than 50% of the total cost of all bearing components (rolling elements, retainers, inner and outer races) derived from these locations, as required by DFARS 252.225-7016. A Contractor’s Declaration on the domestic/foreign nature of materials is mandatory and must be submitted upon request; failure to provide this may disqualify the offer. The item is classified as a critical application item with stringent quality controls, governed by DLA’s Master List of Technical and Quality Requirements, including RQ001 (Tailored Higher Level Quality Requirements), RQ009 (Inspection and Acceptance at Origin), and RQ017 (Physical Identification/Bare Item Marking). Preservation, packaging, and marking must strictly conform to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, including specific preservation methods determined by bearing type and closure, protective lubricant selection per Table II, and barcoding in compliance with MIL-STD-129 with special marking code ZZ indicating unique requirements. Palletization must adhere to RP001, and all delivery is FOB Origin, with final delivery to Cherry Point, NC by day 151. Inspection and acceptance occur at destination, and invoicing is required via WAWF. The solicitation is a total small business set-aside under NAICS 332991, with award expected under a firm fixed-price contract. Contractors must maintain a valid UEI and CAGE code, provide affirmative representations on small business status and compliance with trafficking and employment eligibility laws, and submit safety data sheets for any hazardous materials. No pricing is provided in the solicitation; offerors must submit unit prices, with no quantity variance permitted. The solicitation may be canceled if no compliant bearings
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332991
New
DIBBS
COLLAR, BEARINGThe contract is for the procurement of 205 units of a COLLAR, BEARING with NSN 3110-01-734-2838 and manufacturer part number HS700574 from HORSTMAN, INC., under solicitation SPE4A6-26-T-07VT. Delivery is required within 341 days after order placement, with a firm delivery date of July 5, 2027, and FOB origin terms apply, meaning inspection and acceptance occur at the manufacturer’s facility. Packaging must fully comply with MIL-STD-2073-1E, using clean/dry preservation methods with no chemical preservatives, wrapped in blanketing material without cushioning, and packed under pack code U. Marking adheres strictly to MIL-STD-129, including 2D Data Matrix barcoding, with no special marking codes required. All items must be palletized according to DLA Packaging Requirements for Procurement (RP001). Technical and quality requirements are governed by referenced R numbers in the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality standards, inspection and acceptance at origin, removal of government identification from non-accepted supplies, and physical identification of bare items. Measuring and test equipment used must meet RT001 specifications. The contract incorporates numerous FAR and DFARS clauses covering equal opportunity, combating trafficking, employment eligibility, sustainable products, hazardous material handling, cybersecurity safeguards, prohibited equipment sourcing, whistleblower protections, electronic invoicing via WAWF, and NIST SP 800-171 compliance for safeguarding covered defense information. The contract value cannot be determined due to an unpopulated unit price field, though the quantity is fixed at 205 units with zero variance allowed. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, and all proposals must be submitted electronically through DIBBS by the July 31, 2026 deadline. Offerors must hold a valid UEI and CAGE code, represent their small business status accurately, and comply with all reporting obligations related to hazardous materials, radioactive content if applicable, and telecommunications equipment restrictions. Failure to meet any specification, marking, packaging, or regulatory requirement may result in rejection or non-acceptance.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVEThe contract pertains to the procurement of 20 sleeve bearings with NSN 3120-01-123-6475 under solicitation SPE4A6-26-T-09YX, issued by the Defense Logistics Agency's ASC Commodities Division. The requirement is for delivery within 388 days after order and is classified under NAICS code 332991. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Cybersecurity compliance requires CMMC Level 2 certification by a certified third-party assessment organization, and packaging must adhere to DLA standards. Inspection and acceptance occur at origin, and non-accepted supplies must have all government identification removed. Physical identification of the item must be marked per RQ017, though Item Unique Identification is not required as per the service customer’s request and DFARS 252.211-7003(c)(1)(i). The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons and requiring prior government authorization. Only contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and DLA authorization may access the controlled data, in accordance with DFARS 252.225-7048. The point of contact for the solicitation is Angela Mills, reachable via email and phone provided, and responses are due by August 5, 2026.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULARThis contract mandates the supply of 34 annular ball bearings with part number 258416 and NSN 3110009524128, sourced exclusively from manufacturers in the United States, its outlying areas, or Canada, with more than 50% of the total component cost originating from these regions as stipulated by DFARS 252.225-7016. A contractor’s declaration confirming the domestic origin of materials is mandatory and must be submitted upon request; failure to provide this documentation will disqualify the quote. The bearing is designated a critical application item, and physical identification of the bare item must comply with RQ017, though Item Unique Identification is not required per the Service customer’s request. Packaging, preservation, and marking must strictly adhere to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, including specific preservation methods determined by bearing type and closure, with all packaging facilities required to meet quality assurance verification under MIL-DTL-197M. Delivery is FOB origin within 508 days, with zero quantity variance permitted and both inspection and acceptance occurring at origin. The contract includes adherence to DLA packaging requirements, specialized preservation protocols, and technical quality standards referenced from the DLA Master List. Any failure to meet the domestic sourcing criteria may result in cancellation or delay pending a formal waiver. Additional support for casting, forging, or tooling needs must be requested through designated DLA channels.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULARThis contract specifies the procurement of a ball annular bearing identified by NSN 3110-00-445-2597, with a quantity of three units to be delivered within 660 days after order date under a firm fixed price term with zero variance allowed. The item is classified as a Critical Safety Item by the Navy and is source controlled, requiring strict adherence to limited rights data that only approved vendors with direct access or traceability to approved sources may fulfill. Manufacturing must occur in the United States, its outlying areas, or Canada, with over 50% of the bearing’s component costs originating from these regions, as mandated by DFARS 252.225-7016; contractors must submit a declaration of domestic/foreign content or risk disqualification. Only approved manufacturers—Honeywell International Inc., New Hampshire Ball Bearing Inc., and Ontic Engineering & Manufacturing Inc.—are eligible, and the bearing must conform to Drawing 117088 Revision R and supporting quality assurance procedures. All supplies must comply with stringent technical, quality, and packaging specifications including DLA packaging requirements, MIL-STD-129 for marking, MIL-DTL-197M for preservation and packaging, and RQ006 and RQ009 for inspection and acceptance at origin. The bearing must carry specific markings including lot and serial numbers, contractor and manufacturer CAGE codes, and part number, as required by RQ017. Quality conformance is enforced through SAE AS9100 and mandatory Certificate of Quality Compliance, tied to the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are prohibited except for specific exempted functional uses, and all packaging must include protective preservation per bearing type and closure, with documented adherence to preservation process controls. No unit identification is required per service customer request, and any deviation or waiver requests must be submitted to the DSC Contracting Officer for review. Failure to meet any sourcing, quality, or documentation requirement may result in disqualification or cancellation of the solicitation.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332991
New
DIBBS
CUP, TAPERED ROLLERThe contract is for a single tapered roller cup component identified by NSN 3110-01-673-1914 and part number 01032-0087, supplied by TIMKEN GEARS & SERVICES INC. under solicitation SPE4A6-26-T-10CG. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s location. All packaging, preservation, and marking must comply with MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, including specific preservation methods determined by bearing type and closure, protective lubricant selection per established tables, and adherence to quality assurance protocols outlined in MIL-DTL-197M. Packaging must also meet DLA-specific requirements, including palletization and preservation controls, with no mercury or mercury-containing compounds allowed unless specifically exempted for functional components like batteries, instruments, or weapon systems, and even then, mercury must be contained with secondary boundaries as per NAVSEA standards. The item is not required to carry Unique Identification per DFARS 252.211-7003(c)(1)(i), and technical and quality requirements referenced by R or I numbers are governed by the DLA Master List effective on the solicitation issue date. Special markings and packaging directives must be followed precisely, with all documentation aligned to the referenced military standards and contractual clauses.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVEThe contract pertains to the procurement of a sleeve bearing with NSN 3120-01-063-7020 and part number 785E665-009, supplied by Timken Gears & Services Inc. under solicitation SPE4A6-26-T-10DX, which is a total small business set-aside. Three units are required to be delivered FOB origin within 164 days, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and marking standards per MIL-STD-129 without special markings. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 17, 2027, and original delivery date of November 19, 2027. Technical and quality requirements are governed by the DLA Master List, and sampling follows MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively. Mercury and mercury-containing compounds are prohibited in or in direct contact with the hardware unless explicitly exempted for functional components like batteries, sensors, or instruments specified by NAVSEA, and any portable mercury-containing devices must include shockproof design with secondary containment as per NAVSEA 5100-003D. The unit of issue is AY, and the contract enforces DLA packaging, transportation, and logistics protocols outlined in relevant procedural notes.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541330
New
DIBBS
Counterfeit Electronic Parts Detection System ImplementationThe contract seeks the development and maintenance of a detection and avoidance system designed to identify and prevent the infiltration of counterfeit electronic components within the RF assembly supply chain. This effort is critical to ensuring the integrity and reliability of defense-related electronic systems by implementing advanced technologies that can authenticate components at various stages of procurement and assembly. The system must support real-time detection capabilities, integrate with existing supply chain workflows, and provide auditable logs to meet stringent defense standards for component traceability and provenance. The contractor will be responsible for ongoing system updates, calibration, and support to adapt to evolving counterfeit methods and emerging component technologies. This is a small business total set-aside subcontract under NAICS code 541330, indicating it is reserved exclusively for small business concerns as defined by the SBA. The solicitation was posted on July 28, 2026, with responses due by August 7, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While the place of performance and point of contact details are not specified, the work is expected to support defense supply chain operations, with performance likely requiring collaboration with government stakeholders and adherence to federal acquisition regulations. The emphasis is on innovation, rapid deployment, and sustainable maintenance to ensure long-term resilience against counterfeit threats in high-stakes RF applications.
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight LogisticsThe contract requires the transportation of RF cable assemblies to locations within the contiguous United States, with strict compliance for international shipments using U.S.-flag vessels as mandated by federal regulations. It is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified under the Small Business Administration guidelines are eligible to bid. The North American Industry Classification System code 484220 applies, indicating the scope centers on truck transportation for local and long-distance freight services, though international legs require vessel transport under U.S. registry. The contracting agency is the ASC Commodities Division within the Department of Defense, and the solicitation is open for responses until August 7, 2026, with a posting date of July 28, 2026. Performance locations span both domestic and international destinations, necessitating logistics providers to具备 the capability to navigate complex regulatory environments including maritime laws and defense logistics protocols.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541618
New
DIBBS
Export-Controlled Technical Data ManagementThis contract mandates the secure management and controlled distribution of technical data subject to the International Traffic in Arms Regulations and the Export Administration Regulations, requiring strict adherence to U.S. and Canadian Joint Certification Program standards to ensure compliance with bilateral export control requirements. All handling, storage, transmission, and access to regulated information must be executed through validated security protocols, approved facilities, and authorized personnel with appropriate clearances and training, ensuring no unauthorized disclosure or transfer occurs under any circumstances. The contract is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the Small Business Administration, and is classified under NAICS code 541618 for other scientific and technical consulting services. It is issued by the ASC Commodities Division within the Department of Defense, with responses due by August 7, 2026, and is accessible via the DIBBS platform. Performance is expected to meet all federal export control obligations regardless of geographic location, with no specific place of performance identified, implying flexibility but with full accountability for compliance across all operational environments.
Other Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Defense-Grade Packaging and Marking ServicesThe contract entails the packaging and marking of RF cable assemblies in strict compliance with Defense Logistics Agency standards, ensuring full adherence to military-grade requirements for handling sensitive defense components. This includes implementing shock protection measures to safeguard assemblies during transit, applying government property labels as mandated, and securing the contents within tamper-resistant, containment-compliant packaging to maintain integrity and accountability throughout the supply chain. All work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, with the North American Industry Classification System code 493190 designating the scope to warehousing and storage services specifically tailored for defense logistics. The contract is managed by the ASC Commodities Division under the Department of Defense, with proposals required to be submitted by August 7, 2026, following a July 28, 2026 posting date. The work is expected to be performed without a specified geographic location, and interested parties must respond through the official DIBBS portal referenced in the solicitation.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334417
New
DIBBS
RF Cable Assembly Manufacturing and TestingThe contract awards the manufacture and testing of 100 RF cable assemblies annually under strict military standards, requiring full lifecycle configuration control and comprehensive quality assurance processes to ensure consistent performance and traceability. All work must comply with applicable defense regulations and be performed with rigorous documentation to maintain integrity across production, testing, and delivery phases. The solicitation is set aside exclusively for small businesses as defined by the SBA, aligning with FAR 19.5, and falls under NAICS code 334417 for communications equipment manufacturing. The contract is issued by the ASC Commodities Division under the Department of Defense, with a response deadline of August 7, 2026, and was posted on July 28, 2026. Performance location details are not specified, and no point of contact is listed in the release. Subcontractors seeking to respond must demonstrate capability in high-reliability RF assembly, adherence to military specifications, and the ability to sustain quality control throughout the product’s lifecycle. All bids must be submitted through the designated DIBBS portal prior to the deadline.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and SPRS Compliance SupportThis contract supports independent quality inspection, sampling, and SPRS compliance activities to ensure adherence to military standards and satisfy prime contractor evaluation criteria. The work is designated as a total small business set-aside under SBA guidelines, meaning only small businesses are eligible to bid, and it falls under NAICS code 541330 for engineering services. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, and is issued under the ASC Commodities Division of the Department of Defense. Performance location details are not specified, but the work is intended to support DOD procurement quality assurance objectives. The contract is structured as a subcontract, indicating it will be part of a larger prime contract ecosystem focused on supply chain compliance and inspection validation.
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Domestic Freight HaulingThe contract is for the transportation of finished wiring harnesses from the manufacturer to various domestic military stock locations across the contiguous United States under FOB Origin terms, meaning the buyer assumes all transportation costs and risks once the goods leave the seller’s facility. This is a small business set-aside subcontract classified under NAICS code 484220, which pertains to heavy and tractor-trailer truck transportation, ensuring eligibility is restricted to small businesses as defined by the SBA. The work is being procured by the ASC Commodities Division of the Department of Defense, and the solicitation is open for responses through August 7, 2026, with the opportunity posted publicly on the DIBBS platform. Performance will occur across multiple CONUS locations, requiring a carrier with the capacity to handle frequent, reliable shipments to geographically dispersed military stocking points.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preservation ServicesThe contract mandates the delivery of military-compliant packaging, preservation, and labeling services for finished wiring harnesses intended for extended storage and transport under demanding operational conditions. All work must adhere to strict defense standards ensuring the integrity, durability, and readiness of the assemblies, with specific requirements for corrosion inhibition, environmental protection, and secure containment to withstand extreme temperatures, humidity, and mechanical stress during military logistics cycles. The packaging and labeling must fully comply with applicable military specifications, including clear identification of part numbers, lot codes, handling instructions, and shelf life information to support traceability and field readiness. This is a total small business set-aside under the SBA program, restricted exclusively to businesses certified as small under NAICS code 493190, which covers warehousing and storage services. The opportunity is structured as a subcontract and is administered by the ASC Commodities Division under the Department of Defense. Bids must be submitted by the deadline of August 7, 2026, with no solicitation number provided. Performance location details are unspecified, but services are expected to support DoD supply chain requirements, with all work centered on ensuring long-term survivability and operational preparedness of wiring harnesses in austere environments.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335712
New
DIBBS
Cable and Wire Supply for Harness AssemblyThe contract solicits the supply of certified, traceable military-specification cables, wires, connectors, and insulation materials specifically for the production of wiring harnesses, ensuring strict compliance with defense-grade standards for reliability and performance. All materials must be fully traceable through documented lot numbers and quality control records to meet rigorous military requirements. The opportunity is structured as a subcontract under a Total Small Business Set-Aside, designated by the SBA, meaning only small businesses are eligible to compete, aligning with FAR 19.5 regulations. The NAICS code 335712 classifies this as a wiring and wiring device manufacturing contract, indicating the focus on specialized electrical components rather than general cable production. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, providing a ten-day window for submissions. The contracting activity is the ASC Commodities Division within the Department of Defense, and all performance is expected to adhere to federal defense supply chain protocols, though specific performance locations are not detailed. The procurement is accessible through the DIBBS platform, and bidders must ensure full compliance with military specifications, documentation requirements, and small business certification to qualify. No point of contact information is provided within the posting, suggesting all communication and submission must be handled through the designated federal procurement portal.

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335931
New
DIBBS
Wiring Harness ManufacturingThe contract mandates the manufacture, testing, and delivery of fifty military-grade wiring harnesses designated by NSN 6150-01-119-4113, with strict adherence to established design specifications, material traceability, packaging protocols, and inspection requirements to ensure full compliance with defense standards. All units must meet rigorous quality and performance benchmarks expected for military applications, with documentation and certification required at every stage of production to guarantee accountability and readiness for field deployment. This is a subcontract opportunity classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the NAICS code 335931, which corresponds to other electrical equipment and component manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, and is issued by the ASC Commodities Division under the Department of Defense. While specific performance location and point of contact details are not provided, the work is expected to align with defense logistics requirements, and all bids must be submitted through the designated DIBBS portal prior to the deadline.
Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 999999
New
DIBBS
Service UnavailableThe contract posting is currently unavailable due to system issues, preventing access to detailed prime contract information and related subcontract opportunities. The solicitation, identified under the number SPE4A626RXB88, was posted on July 28, 2026, with a response deadline of August 14, 2026, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. The NAICS code 999999 indicates an undefined or placeholder classification, and no set-aside type, organizational details, or point of contact information has been provided. The place of performance and office address fields are unspecified, and no further administrative or operational details are accessible at this time. The official record can be viewed through the provided DIBBS link, though the system is currently unable to retrieve the underlying contract data.

POSTED

about 17 hours ago

DEADLINE

in 16 days
View Details
NAICS: 541512
New
DIBBS
CMMC Level 2 Compliance & Cybersecurity SupportThe contract seeks ongoing cybersecurity compliance support to achieve and maintain CMMC Level 2 certification, focusing on system hardening, audit readiness, and full alignment with NIST SP 800-171 standards. The work involves implementing and managing technical and procedural controls to ensure continuous adherence to federal cybersecurity requirements, with an emphasis on preparing for third-party assessments and sustaining compliance over time. The contractor will be responsible for identifying gaps in current security postures, applying remediation measures, and documenting all control implementations to meet CMMC criteria. This is a subcontract under the Department of Defense’s ASC Commodities Division, classified under NAICS code 541512 for computer systems design services. The opportunity was posted on July 28, 2026, with responses due by August 7, 2026. While no specific location is designated for performance, the work is expected to be conducted remotely or at the contractor’s facility, supporting the DoD’s broader objective of securing its supply chain. The subcontract nature indicates the selected entity will provide services to a prime contractor or another subcontractor involved in DoD contractual obligations.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details