Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Pre-Solicitation opportunity was posted on May 11, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

C-5 Aircraft Passenger Seats

Closed
SPRWA1-17-R-0044Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413
New
Federal
REGULATOR,AIR PRESS
Solicitation # N0038325QD135
This contract involves the repair, testing, and inspection of the air pressure regulator, identified by part number 1660010397911, under solicitation number N0038325QD135. The work is to be performed by Northrop Grumman Systems at their facility in El Segundo, California, with a focus on returning the items to a serviceable condition in accordance with specified repair manuals and standards. The contract emphasizes strict adherence to quality management systems aligned with ISO 9001/SAE AS9100, and requires the contractor to maintain proper calibration and configuration control throughout the repair process. The repair turnaround time is set at 183 days from receipt of the asset, with provisions for early and incremental deliveries, and the contractor must ensure proper storage and handling of both pending and completed assets. Key contractual elements include detailed inspection and acceptance procedures, a requirement for the use of SAE-AS22759 series wire instead of MIL-W-81381 wire, and strict control over parts and materials, including restrictions on cannibalization and unapproved modifications. The contractor is responsible for providing all necessary parts, tooling, and facilities, unless otherwise specified as Government Furnished Material, and must maintain proper markings, storage conditions, and configuration management. The solicitation, posted by the Department of Defense’s Naval Supply Systems Command in Philadelphia, invites responses by August 25, 2025, with the primary point of contact being Casey A. Russ via email or phone.
Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in about 1 month
NAICS: 336413
New
Federal
15--FLAP ASSY, IN REPAIR/MODIFICATION OF
Solicitation # N0038325QA294
This contract involves the repair, testing, and inspection of a specific aircraft component, the FLAP ASSY, with the goal of returning it to a serviceable condition in accordance with the latest technical publications and approved procedures. The contractor is responsible for providing all necessary facilities, labor, parts, and materials, unless otherwise specified as Government Furnished Material. The scope includes performing repairs, upgrades, and overhauls, with strict adherence to approved repair manuals and configuration management protocols. The contract emphasizes quality assurance through compliance with ISO 9001/SAE AS9100 standards and requires the contractor to maintain a calibration system meeting recognized standards. Repair turnaround times are defined from the receipt of assets, with provisions for handling items that are Beyond Economic Repair (BER), Missing on Induction (MOI), or Over and Above Repair (OAR), requiring prior approval and documentation from the Defense Contract Management Agency. Additionally, the contractor must ensure proper storage, marking, and control of parts and materials, with all transactions accurately reported via the Commercial Asset Visibility system. The contract is managed by the Naval Supply Systems Command, with key points of contact provided for coordination, and it includes provisions for packaging, configuration control, and quality management to ensure the repaired items meet operational standards.
Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in 6 days
NAICS: 336413
New
Federal
MODULE ASSY - ENGIN
Solicitation # NO0383-26-Q-AB01
This Request for Quotations, issued by NAVSUP Weapon Systems Support Philadelphia on September 11, 2026, seeks technical services for the teardown, evaluation, repair, and/or modification of two specific items: a Module Assembly - Engine (NSN 1680-01-585-4772) and a Proximity Switch EL (NSN 1680-01-585-5024). The primary objective is to return these units to a Ready for Issue (RFI) condition, ensuring they perform reliably in their intended operational environments. The contractor is responsible for providing all necessary facilities, labor, materials, and specialized tooling, as the government will not provide manufacturing aids or test equipment unless expressly stated. Because these items are considered flight critical, government source approval is required prior to award, and non-approved sources must submit specific documentation via the NAVSUP WSS Philadelphia Source Approval Information Brochure. The contract mandates strict adherence to technical and quality standards, including ISO 9001 or SAE AS9100 quality management systems and specific calibration requirements. Technical data must comply with MIL-STD-130 for markings and MIL-STD-2073 for packaging, with specific provisions for electrostatic discharge protection and domestic versus overseas shipping levels. Contractors must manage complex repair scenarios, such as items determined to be Beyond Economical Repair (BER), Missing on Induction (MOI), or requiring Over and Above (OAR) repair, all of which require formal written concurrence from DCMA and the Procuring Contracting Officer. Quotations are due by October 13, 2026, and the performance period is set for 90 days following award, with all shipments being FOB Destination.
Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in about 7 hours

General Info

Agency

N/A

Contract Value

$0

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update
PhaseClosed
Posted

Presolicitation

Response Deadline

Deadline has passed

Justification (J&A)

Justification & Approval published

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyN/A
Contacts1 person available
OfficeN/A
Organization / Agency
N/A
Office AddressN/A

Full Description

Show more
DLA Aviation intends to establish a firm fixed price requirements contract consisting of a two-year basic and a one-year option for the purchase of C-5 passenger seats. This effort will include three-man seats NSN 1680-01-206-5361UC, P/N 0001-86-0112 and two-man seats NSN 1680-01-206-5362UC, P/N 0001-86-0113. The Government's best estimated quantities for year one is 85 each three-man seats and 105 each two-man seats; for year two is 48 each three-man seats and 18 each two-man seats; and year three (option) 30 each three-man seats and 5 each two-man seats. The proposed contract action is for supplies for which the Government intends to solicit and negotiate with only the Original Equipment Manufacturer, ETI Tech, Inc, 75 Holiday Drive, Englewood OH 45322 (CAGE 07YQ3), under authority 10 U.S.C. 2304(c)(1) as implemented by FAR 6.302, Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. The notice of intent is not a request for competitive proposals. However, all proposals received within forty-five days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive requirements. Based upon market research, the Government is not using policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirements with a commercial item within 15 days of this notice.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS