BALLISTIC MISSILE DEFENSE (BMD) A-E SATOC

This is a SOURCES SOUGHT notice. The Government is seeking to identify qualified sources under North American Industry Classification System (NAICS) 541330 (Engineering Services). The small business size standard is $15 million. This synopsis is for market research purposes only and IS NOT A REQUEST FOR PROPOSAL (RFP) nor does it restrict the Government as to the ultimate acquisition approach. The Government will not reimburse respondents for any costs incurred in preparation of a response to this notice. 1. CONTRACT INFOMRATION. The U.S. Army Corps of Engineers, Engineering and Support Center, Huntsville is seeking capability statements from firms interested in proposing on an Unrestricted Indefinite Delivery type service contract for Architect-Engineer (AE) design services in support of the Missile Defense Agency's (MDA) Ballistic Missile Defense (BMD) Program. Any contracts awarded are being procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6 and Engineering Pamphlet (EP) 715-1-7. The BMD program is for new and rehabilitation designs of tactical, tactical support; non-tactical facilities including missile control buildings, industrial workshops, power plants, communications facilities, assembly buildings, administration buildings, and various other facilities; new and rehab road work, utility work, and building systems work. The U.S. Army Corps of Engineers; Engineering and Support Center, Huntsville anticipates award of a Architect- Engineer Indefinite Delivery/ Indefinite Quantity (IDIQ) single award task order contract (SATOC), with a twenty-four (24) month base period and three (3) twelve month (12) option periods; for a five (5) year total contract with an estimated program value of $70M. Interested small and large business firms who meet the capability requirements identified in this notice are requested to reply to this e-mail with a response to the requirements presented below. If no experience or capabilities are associated with a particular requirement, so indicate. 2. PROJECT INFORMATION. The objective of this contract is to provide technical support for design of new facilities/sites in support of the deployment of the Missile Defense Agency's (MDA's) Homeland Ballistic Missile Defense (BMD) Sites for the Government. Specific A-E Services requirements are expected to include, but will not be limited to the preparation of design criteria, architectural and engineering designs, specifications, design-related analyses and studies, economic analyses and cost estimates for missile launch, test and evaluation, administrative and training facilities. Additional support may include en vironmental documentation, permits, special studies, and other environmental activities as required by federal, state and local laws and regulations; feasibility studies, other studies, geotechnical investigations and topographi cal mapping services, programmatic support services, manuals, as-built drawings, and engineering and design support during construction. Minimum requirements of sources: Potential sources for performance of the support services shall be fully qualified in providing A-E services related to pre-design engineering studies and design of tactical and tactical support facilities for missile defense weapons systems. The potential sources must demonstrate in their response to this synopsis that they have the capability to perform the following: 1. The contractor shall have established a satisfactory record of completion of similar contracts and will demonstrate sufficient equipment, personnel, organizational, financial, and technical capability to ensure satisfactory completion of the contract. 2. The contractor shall demonstrate the ability to obtain secret security clearances as well as store and process classified material in accordance with Executive Order #12958. 3. The contractor shall demonstrate experience in design of facilities for the assembly, preparation, handling and storage of missiles. 4. The contractor shall demonstrate the capability to provide architectural and engineering disciplines necessary (Architecture, Mechanical, Structural, Civil, Electrical, Power, Fire Protection, Geotechnical, Seismic, and Cost) to design multiple $100 million plus construction cost (CC) military construction projects concurrently for construction in multiple and diverse geographic locations. 5. The contractor shall demonstrate the ability to design critical defense facilities and develop Failure Mode Effects Criticality Analysis (FMECA), and Reliability, Availability and Maintainability (RAM) analyses. 6. The contractor shall demonstrate knowledge and experience incorporating High-Altitude Electromagnetic Pulse (HEMP) and Electromagnetic Interference (EMI) protection in the design of facilities. 7. The contractor shall demonstrate knowledge and experience designing facilities that will be located in areas of high seismic activity according to current Unified Facilities Criteria (UFC) requirements. 8. The contractor shall demonstrate knowledge of explosive safety and blast effects and prior experience designing facilities to accommodate explosive environments to include preparing submittals to the Department of Defense Explosive Safety Board (DDESB). 9. The contractor shall demonstrate ability and experience to design facilities to operate in harsh environmental areas such as corrosive conditions, arid environments and in areas of extremes in temperature and humidity such as encountered in the arctic and the tropics. 10. The contractor shall demonstrate knowledge of electronic and physical security design including but not limited to miscellaneous security studies, access/entry control, site security, antiterrorism protection, and design to protect facilities against Chemical, Biological, and Radiological (CBR) agents. 3. SUBMISSION REQUIREMENTS. Interested firms must provide a brief capability narrative indicating your firms experience and qualifications with similar type services, as well as the prime contractors name, address, point of contact phone number and email address. Submit responses via email to Raven.A.Nall@usace.army.mil. Submission should be received by 2:00 pm CST on 3 October 2014; and should not exceed 5 one-sided, 81/2 quote mark X 11 quote mark pages. Computer files must be compatible with Microsoft Word 2007. NO HARD COPY OR FACSIMILE SUBMISSIONS WILL BE ACCEPTED. Cover letters and extraneous materials (brochures, etc) will not be considered. Questions concerning submissions should be directed to Raven Nall, Contract Specialist at 256-895-1319 (Raven.A.Nall@usace.army.mil) and Shirley Martin, Contracting Officer at 256-895-1642 (Shirley.A.Martin@usace.army.mil). Personal visits for the purpose of discussing this announcement will not be scheduled. CAPABILITIES QUESTIONNAIRE SECTION 1: GENERAL 1. Business Name: (Insert Business Name) 2. Business Address: (Insert Business Address) 3. Cage Code: 4. NAICS Code(s) (list all NAICS codes your firm is registered under) : 5. Responsible Point of Contact: 6. Check All That Apply: Our firm is a 0 8(a) small business, 0 service-disabled veteran-owned small business, 0 HUBZone small business, 0 Small Disadvantaged Business, 0 Woman Owned, 0 Minority, 0 Native American, 0 Small Business SECTION 2: CONTRACTOR ARRANGEMENT 1. Our firm will be proposing on this project as a: 0 Sole Contractor 0Prime Contractor (if small business) performing at least 50% of the work with subcontractor(s), 0 Prime contractor (if small business) performing at least 50% of the work with the following team member subcontractor(s) (Insert business name, business size, cage code, and work which will be subcontracted), or 0 Joint venture with (Insert business name, business size, and cage code). (See FAR subpart 9.6 for Government policy on teaming arrangements, as well as 8(a)Program regulations described in 13 CFR 124.513, HUBZone Program regulations described in 13 CFR 126.616, and Service-Disabled Veteran-Owned Program regulations described in FAR 19.1403(c) and 13 CFR 125.15(b).) SECTION 3: CAPABILITY In response to this notice, please demonstrate the following: 1. You established a satisfactory record of completion of similar contracts and will demonstrate sufficient equipment, personnel, organizational, financial, and technical capability to ensure satisfactory completion of this contract? 2. The ability to obtain secret security clearances as well as store and process classified material in accordance with Executive Order #12958? 3. Experience in design of facilities for the assembly, preparation, handling and storage of missiles. 4. The capability to provide architectural and engineering disciplines necessary (Architecture, Mechanical, Structural, Civil, Electrical, Power, Fire Protection, Geotechnical, Seismic, and Cost) to design multiple $100 million plus construction cost (CC) military construction projects concurrently for construction in multiple and diverse geographic locations. 5. The ability to design critical defense facilities and develop Failure Mode Effects Criticality Analysis (FMECA), and Reliability, Availability and Maintainability (RAM) analyses. 6. Knowledge and experience incorporating High-Altitude Electromagnetic Pulse (HEMP) and Electromagnetic Interference (EMI) protection in the design of facilities. 7. Knowledge and experience designing facilities that will be located in areas of high seismic activity according to current Unified Facilities Criteria (UFC) requirements. 8. Knowledge of explosive safety and blast effects and prior experience designing facilities to accommodate explosive environments to include preparing submittals to the Department of Defense Explosive Safety Board (DDESB). 9. The ability and experience to design facilities to operate in harsh environmental areas such as corrosive conditions, arid environments and in areas of extremes in temperature and humidity such as encountered in the arctic and the tropics. 10. Knowledge of electronic and physical security design including but not limited to miscellaneous security studies, access/entry control, site security, antiterrorism protection, and design to protect facilities against Chemical, Biological, and Radiological (CBR) agents.