Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Cable Assembly Manufacturing & Testing

Active

Federal

Response Deadline08/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture, testing, and delivery of four military-specification cable assemblies identified by NSN 5995016125161, with complete documentation and labeling adhering strictly to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The work must meet all applicable military standards for performance, durability, and traceability, ensuring full compliance for DoD use. The cables are to be produced and tested to precise technical specifications, with all deliverables including test reports, certification documents, and proper identification marks. This is a subcontract opportunity issued by the ASC Commodities Division within the Department of Defense, with performance required in San Diego, California, at zip code 92136-3581. The solicitation was posted on July 27, 2026, and responses are due by August 4, 2026, with the NAICS code 334332 identifying the industry as Cable and Other Wiring Device Manufacturing. All submissions must be made through the DIBBS platform, and the contractor must ensure timely delivery of fully compliant units along with the necessary paperwork to satisfy military logistics and inspection requirements.

General Info

Manufacture and deliver four MIL-SPEC cable assemblies with full documentation and compliance for DoD use in San Diego.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334332View NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture, test, and deliver four units of a military-spec cable assembly (NSN: 5995016125161) with full documentation, labeling, and compliance to MIL-STD-2073-1E and MIL-STD-129.

Similar Contracts

Same NAICS industry code

Small Business Subcontracting Participation (Opportunity for DBE/MBE/WBE)This opportunity is designed to facilitate participation by certified small businesses, including 8(a), HUBZone, WOSB, and SDVOSB entities, in supply, packaging, and quality assurance roles under a prime contractor’s FAR 52.219-9 subcontracting plan. The solicitation targets organizations eligible for small business set-asides and aims to integrate them into the supply chain for defense-related activities managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The North American Industry Classification System code 334332 indicates the focus is on electronic component and board manufacturing, suggesting subcontracting needs related to production, testing, and logistics support within this sector. The deadline for responses is August 31, 2026, with the opportunity posted on July 31, 2026, allowing prospective bidders a one-month window to prepare and submit their proposals. While no specific place of performance or point of contact is listed, the contract is accessible through the DIBBS portal, and participation is contingent upon meeting certified small business status and aligning with the prime contractor’s subcontracting goals. There is no mention of a monetary value or specific contract duration, but the structure implies a framework for ongoing or long-term subcontracting engagement rather than a single project. Certified firms are encouraged to engage through the provided link to secure a role in this defense supply chain initiative.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Precision Connector and Receptacle SupplyThe contract calls for the supply of high-reliability, MIL-SPEC compliant electrical connectors and receptacles equipped with protective caps, intended for integration into control cable assemblies. All components must be certified as free from counterfeit parts and must adhere strictly to military specification standards to ensure performance under demanding operational conditions. The products are critical to defense systems requiring robust electrical connectivity and must be manufactured with traceable materials and processes to maintain integrity throughout the supply chain. This is a subcontract opportunity issued under NAICS code 334332 by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026. The requirement emphasizes compliance with defense-grade quality controls and demands rigorous documentation to verify conformance to specifications. While the place of performance and point of contact details are unspecified, the procurement is managed through the DIBBS system, indicating formal defense procurement protocols are in effect. Suppliers must demonstrate proven capability in producing MIL-SPEC components and maintaining strict anti-counterfeit measures to qualify.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Precision Electrical Connector SupplyThe contract entails the supply of four units of a military-specification electrical connector identified by NSN 5935-01-317-3050, engineered to meet rigorous technical, environmental, and packaging standards required for defense applications. The item is being procured under a subcontract arrangement, with the Defense Logistics Agency acting on behalf of the Department of Defense, ensuring alignment with military operational needs and quality assurance protocols. The connector must adhere to all applicable military specifications to guarantee performance under extreme conditions typically encountered in field operations. The contract was posted on July 29, 2026, and is associated with the NAICS code 334332, which pertains to the manufacturing of electronic connectors and fittings. While specific delivery locations and point of contact details are not provided, the performance is expected to fulfill the requirements of the U.S. military supply chain. The procurement is linked to the DIBBS system under award number SPE7M026P4004, indicating it is part of a broader logistics and acquisition framework managed by the Department of Defense to maintain readiness and equipment reliability.

Defense Logistics Agency

POSTED

DEADLINE

Electronics Component Supply – Push Switch (NSN: 5930014550873)The contract specifies the supply of 114 military-specification push switches designated by NSN 5930014550873, with full compliance to MIL-DTL-28786 technical standards. All units must be delivered with packaging and labeling that adhere to strict military requirements, ensuring readiness for immediate deployment and integration into defense systems. The items are intended for performance at Tracy, California, with a zip code of 95304-5000, and the contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, providing a 13-day window for submission. The NAICS code 334332 identifies the industry as Electronic Component and Product Manufacturing, aligning the supplier’s capabilities with the technical nature of the requirement. The contract is managed by the Electrical Devices Division within the Department of Defense, and interested parties can access further details through the DIBBS portal using the provided link. All submissions must meet the specified standards and small business eligibility criteria to be considered for award.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Electrical Connector Cover SupplyThe contract requires the supply and delivery of 20 units of an electrical connector cover, identified by NSN 5935008370486 and part number 10-101950-081, with each unit packaged in a primary group consisting of 10 units, totaling 20 primary groups. All items must comply with military packaging, labeling, and environmental standards to ensure readiness and interoperability within defense logistics systems. The contract is classified as a subcontract under NAICS code 334332, indicating it pertains to other electrical equipment and component manufacturing, and is managed by the Active Devices Division within the Department of Defense. Performance is to be carried out at Hill Air Force Base, Utah, with the required delivery and compliance obligations tied to this location. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with all submissions expected to meet all technical, logistical, and regulatory requirements specified by the Department of Defense.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Electrical Connector Manufacturing and SupplyThe contract calls for the manufacture and delivery of 56 units of electrical connector bodies and plugs identified by NSN 5935-01-318-3908, all of which must fully comply with applicable military specifications. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, as defined by the SBA under FAR 19.5. The North American Industry Classification System code is 334332, indicating the work falls under the category of other electronic component manufacturing. Performance of the contract is required in Texarkana, with a zip code of 75507-5000, and the solicitation is issued by the ACTIVE DEVICES DIVISION under the Department of Defense. Bidders must submit their responses by the deadline of August 12, 2026, at 5:00 PM, following the posting date of July 28, 2026. The full solicitation details can be accessed through the DIBBS website using the provided link.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Wiring Harness Manufacturing and AssemblyThe contract entails the full-scale manufacturing and assembly of the BRAN wiring harness, encompassing all stages from component sourcing to final product delivery, with strict adherence to military specifications. Every phase—including crimping, bundling, labeling, and assembly—must be performed to meet rigorous defense standards, ensuring reliability and performance under demanding operational conditions. The work is classified as a subcontract under NAICS code 334332, indicating it falls within the category of wiring, cable, and related device manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and is sponsored by the ASC Commodities Division under the Department of Defense. Although specific performance location and point of contact details are not provided, the project is expected to be executed by a qualified subcontractor capable of handling military-grade production requirements. All deliverables must be fully compliant with applicable Defense Department standards, and the contractor is responsible for ensuring end-to-end quality control throughout the manufacturing process.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Electrical Connector (NSN: 5935011043940)The contract requires the supply and delivery of 40 units of a specific electrical connector identified by NSN 5935011043940, which must fully comply with military specifications covering marking, packaging, and hazardous material labeling requirements. The item is intended for delivery to Robins AFB, Georgia, with a delivery address of 31098-1887, and is being procured under a subcontract by the Active Devices Division within the Department of Defense. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and the NAICS code 334332 corresponds to the manufacturing of electrical and electronic components. All deliveries must meet strict defense standards to ensure compatibility, safety, and regulatory compliance in military applications.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Qualified Electrical Connector Manufacturing and AssemblyTwo units of a MIL-DTL-38999/24J(4)-compliant electrical connector assembly must be manufactured, tested, packaged, and delivered for use in critical defense applications, with all production requiring sourcing from or execution by a manufacturer listed on the DLA Qualified Products List for FSC 5935. The work must meet exacting military specifications to ensure reliability and performance in high-stakes operational environments, and the final products are to be delivered to PICATINNY ARSENAL with ZIP code 07806. This subcontract opportunity, issued under NAICS code 334332 by the Department of Defense’s ACTIVE DEVICES DIVISION, requires responses to be submitted by August 12, 2026, and is open to qualified entities capable of fulfilling stringent defense procurement standards without set-aside restrictions.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Toggle Switch Supply (Commercial Off-the-Shelf Component)The contract entails the supply of 80 military-specification toggle switches identified by NSN 5930200108101, sourced as commercial off-the-shelf components to meet defense requirements. The items must adhere to all applicable packaging, marking, and hazard communication standards mandated for delivery to U.S. defense entities, ensuring full compliance with federal and military logistics protocols. The procurement is structured as a subcontract under NAICS code 334332, managed by the Electrical Devices Division of the Department of Defense, with performance required at the facility located in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026. No set-aside provisions apply, and the contract is open to eligible subcontractors meeting the technical and regulatory specifications. The transaction will be processed through the DIBBS platform, and all submissions must satisfy the defined military-grade criteria for functionality, durability, and documentation to qualify for acceptance and delivery.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

RF Cable Assembly ManufacturingThe contract requires the manufacture of 41 units of a military-spec RF cable assembly identified by NSN 6150-01-494-4086, with strict adherence to Department of Defense technical standards established by the Defense Logistics Agency. All components and manufacturing processes must ensure full traceability and meet rigorous quality assurance protocols to guarantee performance in critical defense applications. The work falls under NAICS code 334332, indicating specialized electronic component manufacturing, and is structured as a subcontract under the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 27, 2026, with a response deadline of August 10, 2026, and performance is expected to align with military supply chain requirements without specified geographic restrictions.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of Branched Wiring HarnessesThe contract entails the manufacture of 60 units of branched wiring harnesses under National Stock Number 6150-01-571-7860, encompassing all aspects of production such as procurement of materials, labor, quality testing, and strict adherence to military specifications. The work is part of a subcontract arrangement issued by the ASC Commodities Division under the Department of Defense, with all deliverables required to meet defined defense standards for performance, durability, and reliability. The project scope is fully defined around this single NSN, ensuring standardized output and regulatory compliance throughout the production cycle. The solicitation was posted on July 27, 2026, with a response deadline set for August 7, 2026, indicating a narrow window for qualified subcontractors to submit proposals. The North American Industry Classification System code 334332 identifies the work under electronic product manufacturing, aligning with specialized electrical component fabrication. While no specific place of performance or point of contact is provided, the contractual obligations must be fulfilled in compliance with federal defense procurement guidelines. The contract is not designated for any specific set-aside program, opening eligibility to all qualified entities capable of meeting the technical and logistical demands of military-grade wiring harness production.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Product Verification Testing CoordinationThe contract requires the preparation, marking, and shipment of Product Verification Test (PVT) samples in full compliance with Department of Defense standards, including proper segregation of materials and complete documentation to ensure traceability and regulatory adherence. All activities must be conducted under strict guidelines to meet the DoD’s quality and procedural requirements for verification testing. The effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and is managed by the ASC Commodities Division within the Department of Defense. Performance will occur at an unspecified location, and the award is expected to follow competitive procedures under the Federal Acquisition Regulation.

Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

Supply Chain & Logistics Compliance ManagementThe contract requires management of specific DLA logistics modules—C03, C07, C16, and C20—with a focus on maintaining adequate material buffers to prevent stockouts and ensure operational readiness. It mandates rigorous part number tracking to guarantee accurate inventory visibility and accountability across the supply chain, while ensuring full compliance with First Destination Transportation regulations to meet military shipment standards. All activities must align with strict logistical protocols to support timely and accurate delivery of critical components. This is a small business set-aside subcontract under NAICS code 488510, issued by the ASC Commodities Division within the Department of Defense, with a submission deadline of August 20, 2026. The solicitation is posted on the DIBBS system and is open only to small business concerns, emphasizing support for small business participation in defense logistics. While the place of performance and detailed point of contact information are not specified, successful bidders must be prepared to execute responsibilities across the Department of Defense’s logistics network without geographic limitation, ensuring all compliance requirements are met consistently and in real time.

Freight Transportation Arrangement

POSTED

about 3 hours ago

DEADLINE

Military-Compliant Labeling & BarcodingThe contract requires the application of permanent, MIL-STD-129-compliant labels and 2D barcodes to shipping containers used by the Department of Defense, ensuring full adherence to military standards for identification and tracking. Special markings must be included for test samples to distinguish them from standard shipments, with all labeling required to be durable and legible under operational conditions. This is a small business set-aside subcontract under NAICS code 323111, exclusively open to small businesses, and is managed by the ASC Commodities Division. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and performance is expected to support DoD logistics operations without specified geographic limitations, though exact location details are not provided.

Commercial Printing (except Screen and Books)

POSTED

about 3 hours ago

DEADLINE

Military Packaging & Preservation ServicesThe contract requires the provision of military-grade packaging and preservation services for adjustable clevises in full compliance with MIL-STD-2073-1E standards, ensuring that all items are properly cleaned, dried, and protected against corrosion and environmental damage during storage and transit. The packaging must include stretch wrap containerization as the specified method for securing and stabilizing the items within shipping containers, maintaining integrity and preventing movement during handling. All work must adhere to strict defense logistics protocols to guarantee readiness and operational reliability. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside category, designated under NAICS code 493190, and issued by the Department of Defense’s ASC Commodities Division. Interested parties must submit proposals by the deadline of August 20, 2026, with performance expected to meet exacting military specifications and timelines. The contract emphasizes quality control, regulatory compliance, and the use of approved preservation and packaging techniques to support the Department of Defense’s supply chain requirements.

Other Warehousing and Storage

POSTED

about 3 hours ago

DEADLINE

Adjustable Clevis Manufacturing & SupplyThe contract calls for the manufacture and supply of adjustable clevises identified by NSN 5342-01-166-0578, to be produced in strict compliance with military specifications. This includes precision machining to exact dimensional and performance standards, along with proper packaging and marking requirements to ensure traceability and readiness for military use. The work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, meaning only eligible small businesses may submit bids. The NAICS code 332710 applies, categorizing the work under Other Metal Forge and Stamp. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, giving interested parties approximately three weeks to prepare and submit proposals. The contracting activity is the ASC Commodities Division under the Department of Defense, and the place of performance and point of contact details are not specified in the provided data. Bidders must ensure complete adherence to military standards, packaging protocols, and marking regulations, and submissions must be made through the official DIBBS portal accessible via the provided link.

POSTED

about 3 hours ago

DEADLINE

CLEVIS, ADJUSTABLE

Solicitation # SPE4A6-26-R-XC15

This contract, issued under solicitation SPE4A6-26-R-XC15 by the ASC Commodities Division of the Department of Defense, is a Total Small Business Set-Aside for the procurement of adjustable clevises with NSN 5342-01-166-0578, classified under NAICS code 332710. The contract operates as an indefinite-delivery, indefinite-quantity (IDIQ) mechanism with a five-year performance period and a total ceiling value of $350,000, requiring delivery within 80 days of order receipt. Performance is to be conducted at various CONUS stock locations under FOB Origin terms, with all items subject to strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, barcoding, and marking, including special notations for product verification test samples. The contract mandates use of Wide Area WorkFlow (WAWF) for all invoicing and receiving reports and includes detailed requirements for supply chain traceability, material buffer availability, and Vendor Shipment Module submissions. The contract incorporates a comprehensive set of FAR and DFARS clauses governing quality assurance, inspections, subcontracting, and compliance, with inspections occurring at both origin and destination under MIL-STD-1916, ASQ H1331, and MIL-STD-105 standards, demanding zero non-conformances unless otherwise specified. Subcontracting obligations require flowdown of key clauses, including those addressing commercial product sourcing and counterfeit electronic part avoidance, with specific requirements for subcontracts exceeding the simplified acquisition threshold. The contractor must comply with cybersecurity mandates such as NIST SP 800-171 under 252.204-7012, prohibited use of covered defense telecommunications equipment and foreign satellite services, and hazard communication labeling under OSHA guidelines. The contract prohibits unauthorized use of foreign-flag vessels and requires immediate notification if sea transportation is unexpectedly needed. Representations concerning small business status, labor practices, veteran and disability inclusion, trafficking in persons, and foreign sourcing (including Xinjiang and Russian-linked entities) are required and subject to SAM verification, with affirmative responses triggering additional reporting obligations. The award will be made through a best-value trade-off analysis heavily weighted toward past performance, particularly SPRS assessments, with cost considered as neither the sole nor primary factor. All submissions must be made electronically via DIBBS or email to

POSTED

about 3 hours ago

DEADLINE

Military-Compliant Packaging, Marking & PalletizationThe contract requires the final packaging, labeling, and palletization of eight cable assemblies in full compliance with MIL-STD-129, RP001, and DLA standards, ensuring all items are properly marked with data matrix barcodes and treated with protective preservation to maintain integrity during transport and storage. All work must be executed to meet rigorous military specifications for identification, traceability, and physical protection of sensitive components. The solicitation is classified as a subcontract under NAICS code 493190 and is managed by the ASC COMMODITIES DIVISION under the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The response deadline is August 4, 2026, and the solicitation was posted on July 30, 2026, leaving a limited window for qualified vendors to submit proposals through the provided DIBBS portal.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the provision of hazard warning labels, Safety Data Sheets, and regulatory compliance documentation for military cable assemblies, ensuring adherence to OSHA and DFARS standards. All deliverables must accurately reflect the physical and chemical hazards associated with the materials used in the cable assemblies and be formatted to meet federal military specifications for safety and traceability. The work is classified as a subcontract under NAICS code 541620, targeting specialized environmental and regulatory compliance services, and is managed by the ASC Commodities Division within the Department of Defense. Performance is required at the designated location in New Cumberland, Pennsylvania, with a strict submission deadline of August 4, 2026, and an initial posting date of July 30, 2026. The solicitation does not specify a set-aside type or small business preference, indicating it is open to all qualified vendors. Compliance must be fully documented and verifiable through official channels, with the contracting office operating under the Defense Logistics Agency’s DIBBS platform for submissions and communications. Failure to meet label accuracy, SDS completeness, or regulatory alignment will result in non-compliance and potential contract termination.

Environmental Consulting Services

POSTED

DEADLINE

Special-Purpose Electrical Cable Assembly ManufacturingThe contract requires the manufacture of eight units of a military-spec electrical cable assembly identified by NSN 6150-01-632-3571, with full compliance to Department of Defense technical standards, including MIL-STD-129 labeling for uniform identification and hazmat regulations for safe handling and transportation. The work is classified under NAICS code 335999 and is issued as a subcontract through the ASC Commodities Division of the Department of Defense. All units must be delivered to the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, ensuring adherence to stringent military specifications throughout design, fabrication, testing, and packaging. The solicitation was posted on July 30, 2026, with responses due by August 4, 2026, creating a tight five-day window for qualified vendors to submit proposals. The contract is part of a broader defense supply chain initiative and demands strict compliance with all documentation, traceability, and quality assurance protocols aligned with federal procurement guidelines.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-10ZN

The contract pertains to the procurement of one pin and lock assembly identified by NSN 5315-01-686-7674 under solicitation SPE4A6-26-T-10ZN, with a required delivery within 90 days of contract award and a firm delivery date of November 6, 2026. The item is classified as a commercial item and is not subject to Item Unique Identification requirements per DFARS 252.211-7003(c)(1)(i). Packaging must fully comply with MIL-STD-2073-1E and DLA packaging standards, including specific preservation methods, packaging materials, and unit container details, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization must follow DLA’s procurement packaging requirements, and delivery is FOB origin to the specified destination at the DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling protocols aligned with MIL-STD-1916 or comparable zero-based plans, and acceptance criteria follow established quality assurance levels unless otherwise stipulated. The technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. The unit of issue is each, and the purchase request number is 7017696787.

Other Fabricated Wire Product Manufacturing

POSTED

DEADLINE

CABLE ASSEMBLY, RADIO F

Solicitation # SPE4A6-26-T-10YG

The contract pertains to the procurement of five radio frequency cable assemblies with the NSN 5995-01-671-1806, issued under solicitation SPE4A6-26-T-10YG by the Defense Logistics Agency’s ASC Commodity Division. Delivery is required within 276 days of award, and the work is to be performed at Tracy, California, 95304-5000. The item is subject to stringent technical and quality requirements aligned with the DLA Master List of Technical and Quality Requirements, including specific provisions for physical identification and bare item marking. Cybersecurity compliance mandates CMMC Level 2 certification for any third-party assessment organization involved, and the contract incorporates tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging must adhere to DLA procurement standards, and inspection and acceptance are to occur at origin. The cable assembly contains technical data subject to U.S. export control regulations under either ITAR or EAR, prohibiting unauthorized disclosure or export, including to foreign nationals within the United States. DFARS 252.225-7048 governs handling of this controlled data, and only contractors with an approved US/Canada Joint Certification Program certification, who have completed required DOD export control training and DLA’s questionnaire, may access the information. Government identification must be removed from non-accepted items, and the contract explicitly excludes unapproved distribution. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, under a NAICS code of 335931 for other electronic component manufacturing. Primary point of contact is Victoria Burcham, with contact details provided for inquiries.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

NUT, PLAIN, HEXAGON

Solicitation # SPE4A6-26-T-10UR

The contract is for the procurement of four plain hexagonal nuts with NSN 5310-01-392-8585, issued under solicitation SPE4A6-26-T-10UR by the ASC Commodities Division of the Department of Defense. Delivery is required within 336 days of award, and responses must be submitted by August 7, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item must comply with DLA packaging standards and physical identification requirements, and all government identification must be removed from any non-accepted supplies. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed in any sample unless otherwise specified, and attributes are to be classified with defined verification levels or AQLs. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless the contract dictates otherwise. Mercury and mercury compounds are strictly prohibited from intentional addition or direct contact with the hardware except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. Documentation for source approval must be provided as required, and the point of contact for the solicitation is Kela Griffin, with delivery performance designated to New Cumberland, PA.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE