Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CABLE ASSEMBLY, POWER, E

Active
SPE4A6-26-T-13XZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a cable assembly, power, electrical, with NSN 6150-01-721-7742, quantity of four units, to be delivered within 170 days after order. Technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, with specific revisions controlled by the solicitation issue or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All components must be sourced from qualified products or manufacturers lists as defined by applicable specifications. Inspection and acceptance occur at the manufacturer’s origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Physical identification of the item must be clearly marked per requirements. The technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling export-controlled data, and DLA authorization may access this technical data. The solicitation number is SPE4A6-26-T-13XZ, issued on August 5, 2026, with responses due by August 13, 2026, under NAICS 335311, through the Department of Defense’s ASC Commodities Division, and performance is to be delivered to Tracy, CA, 95304-5000.

General Info

Four power cable assemblies, NSN 6150-01-721-7742, due in 170 days, ITAR-controlled, DLA standards, zero defects required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-13XZ for DLA Aviation Supplies

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
VICTORIA BURCHAM
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,POWER,ELECTRICAL
CABLE ASSEMBLY,POWE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
SPE4A6-26-T-13XZ
SECTION B
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6150-01-721-7742 Quantity: 4 EA Purchase Request: 7017741521QTY: 4 Delivery: 170 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
International
Epcor - Request for Proposal - Three Phase Pad - Mounted Voltage Regulators
Solicitation # AB-2026-04948
EPCOR is seeking a contractor to engineer, supply, and deliver three-phase pad-mounted voltage regulators on an as-needed basis under a three-year contract with the option to extend for two additional one-year terms. The contractor must deliver up to five initial units, with EPCOR retaining the right to purchase additional units throughout the contract period. Each voltage regulator must fully comply with the technical specifications outlined in Appendix 1, ensuring performance, durability, and compatibility with EPCOR’s infrastructure. The solicitation, identified as AB-2026-04948, was posted on August 5, 2026, with proposals due by August 10, 2026, and is open to qualified proponents capable of meeting EPCOR’s engineering and delivery requirements. All work is to be performed in Alberta, and inquiries should be directed to Brian Uzomba, Procurement Analyst, at the provided contact details.
Epcor

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335311
New
DIBBS
Cable Assembly Manufacturing & TestingForty-nine defense-grade cable assemblies must be manufactured, assembled, and thoroughly tested to meet stringent military specifications, including adherence to DLA standards and MIL-STD-129 packaging requirements. Each unit is subject to origin inspection and requires fat testing whenever there is a change in process or materials to ensure consistent performance and reliability. The work is to be performed at the designated place of performance in Texarkana, Texas, with a zip code of 75507-5000. The contract is classified as a subcontract under NAICS code 335311 and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 5, 2026, with a mandatory response deadline of August 13, 2026, and all submissions must be completed through the designated DIBBS platform.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
Electric Siren Manufacturing and AssemblyThe contract entails the full manufacturing, assembly, and quality control of electric motor-operated sirens in strict adherence to military specifications, covering all aspects from component sourcing to final product verification. All work must comply with established technical standards and military requirements, ensuring the delivered systems meet the operational readiness and durability benchmarks expected by defense applications. The subcontract requires end-to-end responsibility for production, including testing and certification to guarantee performance under demanding conditions. The solicitation, managed by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, is set to close on August 17, 2026, with a performance location in New Cumberland, Pennsylvania, postal code 17070-5002. The North American Industry Classification System code 335311 identifies this as an electrical equipment manufacturing activity. While no set-aside type or specific contact details are provided, the contract is structured as a subcontracting opportunity under a broader defense procurement framework, requiring precise execution and compliance with federal defense manufacturing protocols.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
Electrical Contact Component Manufacturing & SupplyThe contract calls for the manufacture and supply of 16 units of an electrical contact component identified by NSN 5999009771221, strictly adhering to military specifications and approved military drawings. Production must comply with zero-based sampling inspection plans, ensuring rigorous quality control without relying on statistical sampling allowances. The component is intended for use within defense systems, requiring precise adherence to technical standards and performance criteria defined by military engineering requirements. All units must be produced to meet exacting durability, conductivity, and environmental resilience standards expected in operational military environments. This is a subcontract solicitation issued by the Department of Defense under the Maritime Supply Chain ESOC Buys division, with a posted date of August 5, 2026, and a response deadline of August 17, 2026. The North American Industry Classification System code 335311 indicates the scope pertains to electrical equipment and component manufacturing. There is no set-aside designation specified, meaning eligibility is open to all qualified contractors regardless of business size or classification. The place of performance and point of contact details are not provided, but the solicitation can be accessed via the DIBBS platform using the provided link. Contractors must submit responses before the deadline to be considered for award.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M2-26-T-6042
This contract specifies the procurement of a power transformer under NSN 5950012975773, identified by part number M27/320-16, and must comply with MIL-T-27 and MIL-PRF-27/320C and MIL-PRF-27G specifications, with revisions dated April 2022 and March 2025 respectively. The item is classified as a critical application item and must adhere to strict configuration change management controls, requiring formal engineering change proposals for any deviations. The transformer must meet all technical, quality, and traceability requirements set forth in the DLA Master List of Technical and Quality Requirements, and is subject to prohibition of ozone-depleting chemicals and mercury, except for specific functional uses in batteries, instruments, or components authorized by NAVSEA. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with bare items marked with the contract number, NAWC CAGE, and part number unless otherwise directed by technical drawings. The transformer must also satisfy NAVAIR aircraft launch and recovery equipment traceability standards. Three units are required to be delivered FOB origin within 140 days of contract award, with no variance allowed in quantity. Delivery is due by January 5, 2027, with the original required delivery date set for December 31, 2026. Inspection and acceptance occur at the destination, and all items must be prepared for shipment in accordance with designated packaging methods and unit of issue requirements. The shipping and receiving address is DLA Distribution San Joaquin in Tracy, California. The solicitation number is SPE7M2-26-T-6042, issued under NAICS code 335311 by the Department of Defense’s Nuclear Reactor Program through DLA, with Alisha Blanton as the primary point of contact. The contract requires full compliance with DoD procurement protocols, hazardous materials handling procedures, and authorized unit of issue standards.
NUCLEAR REACTOR PROGRAM

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
CONTROL, ELECTRONIC
Solicitation # SPE8E8-26-T-5032
This contract pertains to the procurement of electronic control units under solicitation SPE8E8-26-T-5032, with a total quantity of nine units identified by NSN 6350-01-623-1250 and part numbers CI-CYP-20006 and S100XB2(24VDC)XA6XBRUTE. The items must be furnished FOB origin with no quantity variance allowed, delivered within 167 days, and inspected at destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, using unit container 10, dry preservation method, and no special marking. Packaging and shipping of hazardous materials, including mercury-containing components, are governed by strict prohibitions against intentional mercury addition except for approved functional applications such as specific instruments, sensors, controls, and naval-specified reagents, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. All requirements referenced in the DLA Master List of Technical and Quality Requirements are incorporated by reference, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Delivery is to be made to the DLA Distribution DDSP New Cumberland Facility at 2083 Normandy Drive, New Cumberland PA 17070-5002, with a required ship date of February 1, 2027, and an original delivery deadline of November 12, 2026. Transportation logistics follow DLAD Proc Notes C19 and C20, and the unit of issue is defined per DoD standards linked in the document. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with Alexis Selby as the primary point of contact. Covered defense information provisions apply, and all materials must conform to ANSI X12 unit of issue standards. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, under NAICS code 335311 for electronic control manufacturing.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12VM
The contract specifies a single unit of a cable assembly with NSN 6150016631413 and part number MK4654117-06, procured under solicitation SPE4A6-26-T-12VM for the USS NEW ORLEANS LPD 18. Delivery is required within 20 days FOB destination, with no variance permitted in quantity, and both inspection and acceptance occur at the delivery point. The item must be packaged per MIL-STD-2073-1E with packaging code U, marked in accordance with MIL-STD-129 using no special marking code, and palletized following DLA packaging requirements. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with sampling conducted under MIL-STD-1916 or an equivalent zero-based plan, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0; unspecified attributes default to major. Any configuration changes require an Engineering Change Proposal or variance request. The shipment is destined for FPO AP 96673, and transportation protocols C19 and C20 apply. The contract is issued by the Department of Defense’s ASC Commodities Division, with Berkeley Vaughan as the primary point of contact, and the required delivery date is June 8, 2026.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-10AM
A specialized electrical branched cable assembly, identified by NSN 6150-01-453-2729, is being procured under solicitation SPE4A6-26-T-10AM with a total quantity of 13 units to be delivered within 66 days from award to the defense logistics agency distribution facility in New Cumberland, Pennsylvania. The acquisition is a total small business set-aside under NAICS code 335311, with no contract value disclosed due to missing unit pricing. All assemblies must comply rigorously with MIL-STD-130 for Item Unique Identification and MIL-STD-2073-1E and MIL-STD-129 for packaging, labeling, and marking, including preservation methods classified as CLNG/DRY with no preservative applied. Technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, with tailored higher-level quality expectations applying to both manufacturers and nonmanufacturers. The item is subject to export control under ITAR or EAR, restricting disclosure of technical data to foreign parties; only contractors with approved JCP certification, completed DOD training, and DLA authorization may access this controlled information. Contractual obligations include compliance with FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, hazardous material handling, prohibition of hexavalent chromium, safeguarding of covered contractor information systems, NIST SP 800-171 requirements, and electronic invoicing via WAWF. Inspection and acceptance occur at the origin, with quality assurance governed by MIL-STD-1916 and SAE AS9003, and the contractor must submit Safety Data Sheets and adhere to all applicable federal safety and environmental regulations. Payment will be processed electronically through WAWF, and delivery must meet FOB Origin terms. The contract mandates full compliance with cybersecurity safeguards, export control policies, and small business representation, with no alternative invoicing methods permitted.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335311
New
DIBBS
TRAY, BATTERY
Solicitation # SPE7L7-26-T-4588
The contract pertains to the procurement of one battery tray, identified by NSN 6160017056418 and part number 6160-01-705-6418, under solicitation SPE7L7-26-T-4588, issued by the Defense Logistics Agency. Delivery is required within five days of award, with FOB origin terms, zero quantity variance allowed, and inspection and acceptance to occur at the supplier’s location. The item must comply with stringent technical and quality standards from the DLA Master List of Technical and Quality Requirements, which override any general industry standards like ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must meet DLA Packaging Requirements for Procurement. The product must also conform to specified reference drawings and technical data packages, including military specifications MIL-DTL-64159 and MIL-DTL-53039F. The supplier must be a CMMC Level 2 Certified Third-Party Assessment Organization, ensuring cybersecurity maturity. All items must be physically identified per RQ017, and government identification must be removed from non-accepted supplies. Sampling follows MIL-STD-1916 or a comparable zero-based method with zero non-conformances required unless otherwise specified. The delivery destination is a U.S. Army installation in Powidz, Poland, with transportation governed by DLAD procedural notes. The required delivery date is June 30, 2026, and the contract emphasizes full and open competition without set-aside restrictions.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-12SJ
The contract involves the procurement of a wiring harness with NSN/part number 6150-01-674-4547, quantity one unit, under solicitation SPE4A6-26-T-12SJ, with a response deadline of August 13, 2026, and delivery required 380 days after contract award. The item contains technical data subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and access to the controlled data is restricted to DLA contractors holding valid US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and approved status through the DLA questionnaire process. The contracting activity is the ASC Commodities Division under the Department of Defense, with performance designated for New Cumberland, Pennsylvania, 17070-5002, and primary point of contact is Marcita Robinson, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
SENSING ELEMENT, FIR
Solicitation # SPE8E8-26-T-5052
The contract pertains to the procurement of 11 units of a FIR sensing element with NSN 6350-37-530-6236 and part number 90100040030-00A, supplied by CONSILIUM MARINE US INC and CONSILIUM MARINE & SAFETY AB. The unit price is $11.00 per unit, totaling $121.00, with delivery required FOB origin within 167 days from the contract award. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master list of technical and quality requirements, including MIL-STD-129 for labeling and RP001 for palletization. If the item is hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging in accordance with ASTM D3951 is required, though DLA requirements take precedence. The item must be marked and labeled per specified standards, and the unit of issue is each (EA) with zero variance allowed in quantity. The required ship date is February 1, 2027, with an original delivery deadline of February 23, 2027. Transportation and shipping instructions reference DLAD procurement notes C19 and C20. The solicitation number is SPE8E8-26-T-5052, issued August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 335311 for the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
COIL, ELECTRICAL
Solicitation # SPE7M1-26-T-250E
The contract pertains to the procurement of two electrical coils identified by NSN 5950-01-582-0088 and part number 266763-902-D, supplied by IVES EQUIPMENT, LLC and AUTOMATIC SWITCH COMPANY, with a total quantity of two units at a unit price of $2.00 each, for a total contract value of $4.00. Delivery is required FOB destination within 20 days of contract award, with zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, including MIL-STD-129 labeling, RP001 palletization standards, and either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with the former taking precedence. Mercury and mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemically specified reagents, and when present, portable devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. All packaging must be marked and labeled per government specifications, and the shipment must be sent to the designated FPO address with transportation directives outlined in DLAD Proc Note C19 and C20. The contract is governed by DLA procurement policies, and technical specifications referenced through R and I numbers must be accessed via the official DLA Master List website. The required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026, and primary point of contact is Ryan Snyder of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541690
New
DIBBS
Export Control Compliance (ITAR/EAR)The contract requires strict adherence to export control regulations under ITAR and EAR as specified in DFARS 252.225-7048, mandating comprehensive management of technical data and components subject to U.S. export restrictions. This includes accurate classification of controlled information, implementation of robust access controls to ensure only authorized personnel can engage with sensitive data, maintenance of detailed audit trails to document all interactions, and timely submission of compliance reports to demonstrate ongoing adherence to regulatory requirements. The scope applies to all controlled components or data handled under the subcontract, with full accountability falling on the contractor to maintain continuous compliance throughout the performance period. The subcontract is issued by the ASC COMMODITIES DIVISION under the Department of Defense, with performance required at a location in Texarkana, Texas, ZIP 75507-5000. The North American Industry Classification System code 541690 indicates the work falls under other scientific and technical consulting services. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026. While no set-aside designation is specified, the nature of the requirements necessitates a high level of expertise in defense export compliance, making qualification and proven experience in managing controlled technical data under U.S. regulations a critical factor for potential bidders.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials & HAZCOM ComplianceThe contract requires strict adherence to OSHA HAZCOM standards and MIL-STD-129 for the proper labeling, handling, and packaging of all hazardous materials involved in manufacturing or packaging operations, ensuring that all documentation, signage, and safety procedures meet federal regulatory requirements. A critical prohibition is included against the use of hexavalent chromium in any form within the processes covered by this agreement, aligning with environmental and worker safety mandates. Performance is to occur at the designated location in Texarkana, Texas, with all activities governed by the specifications outlined in the referenced standards to maintain consistency and compliance across the supply chain. The subcontract is classified under NAICS code 541620 and is issued by the ASC Commodities Division of the Department of Defense, with a response deadline of August 13, 2026, and a posting date of August 5, 2026. All parties must ensure that packaging and labeling comply with MIL-STD-129 for uniformity and traceability, while HAZCOM obligations require accessible safety data sheets, employee training, and hazard communication protocols. Failure to comply with the hexavalent chromium prohibition or labeling standards may result in contract violation, necessitating rigorous internal controls and audits to demonstrate ongoing adherence throughout the contract period.
Environmental Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & NIST 800-171 Assessment SupportThe contract seeks third-party assessment and advisory services to ensure compliance with NIST SP 800-171 and CMMC Level 2 requirements, focusing on system audits, Plan of Action and Milestones development, and preparedness for cyber incident reporting. The services are intended to support the ASC Commodities Division within the Department of Defense in achieving and maintaining robust cybersecurity postures aligned with federal standards, particularly for covered contractor information systems handling sensitive but unclassified data. The scope includes evaluating existing controls, identifying gaps, recommending remediation strategies, and validating implementation effectiveness to meet regulatory obligations. This subcontract is solicited under NAICS code 541512 for computer systems design services, with a response deadline of August 13, 2026, and a posting date of August 5, 2026. Performance is required at the location in Texarkana, Texas, with a ZIP code of 75507-5000. The contract does not specify a set-aside status, and while no point of contact details are provided, potential offerors must ensure complete alignment with the technical and compliance deliverables outlined in the solicitation through the DIBBS portal link. All work must be conducted in support of Department of Defense cybersecurity compliance objectives without deviation from the mandated standards.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
DIBBS
Export-Controlled Technical Data Handling (JCP-Certified Support)The contract pertains to the management of export-controlled technical data associated with screw design and manufacturing, requiring full compliance with the International Traffic in Arms Regulations, the Export Administration Regulations, and the Defense Federal Acquisition Regulation Supplement clause 252.225-7048. All personnel handling the data must hold JCP certification to ensure proper safeguarding and handling of sensitive technical information subject to U.S. export control laws. The work is classified as a subcontract under NAICS code 541611, indicating it involves scientific and technical consulting services. Performance is required at the location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, with the contracting activity under the ASC Commodities Division within the Department of Defense.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & SDS ManagementThe contract requires comprehensive management of Safety Data Sheets for hazardous materials used in manufacturing or packaging operations, ensuring full compliance with OSHA, FIFRA, and FDCA regulations. Responsibilities include the accurate identification of all hazardous substances, proper labeling in accordance with federal standards, and timely submission of updated SDS documentation to meet regulatory requirements. The work must be performed at the specified place of performance in New Cumberland, Pennsylvania, with strict adherence to federal safety and environmental guidelines. The solicitation, issued under the NAICS code 541690 for other scientific and technical consulting services, is structured as a subcontract and opens for responses beginning August 5, 2026, with a firm deadline of August 13, 2026. The contracting activity is managed by the ASC Commodities Division under the Department of Defense. Contractors must possess the technical expertise to navigate complex regulatory frameworks and deliver precise, compliant documentation to support safe handling, storage, and use of hazardous materials in defense-related production environments.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
First Article Testing (FAT) ServicesThe contract solicits Independent First Article Testing services for machine screws, requiring comprehensive dimensional, material, and performance verification in accordance with military standards. The work focuses on ensuring compliance through rigorous testing protocols to validate that the initial production samples meet all specified requirements before full-scale manufacturing. The contract is classified as a subcontract under NAICS code 541330, indicating it falls within the architectural and engineering services category, and is managed by the ASC Commodities Division of the Department of Defense. Proposals must be submitted by the response deadline of August 13, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. Although no specific set-aside type or point of contact is provided, the solicitation is accessible via the DIBBS platform, and interested parties are expected to align their testing capabilities with DoD military specifications. Participation requires proven expertise in military-grade component validation and the capacity to deliver certified test results within the agreed timeframe.
Engineering Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332322
New
DIBBS
Machine Screw Supply (NSN 5305016995340)The contract entails the supply of 181 precision machine screws with the National Stock Number 5305016995340, adhering strictly to DLA technical, quality, and packaging specifications. These components are critical for defense applications and must meet rigorous standards to ensure performance and interoperability within military systems. The effort is classified as a subcontract under NAICS code 332322, indicating it falls within the precision machining and fastener manufacturing sector. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contracting activity is managed by the ASC Commodities Division under the Department of Defense. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, providing a narrow eight-day window for qualified vendors to submit proposals. All submissions must comply with DLA’s procedural and technical requirements to be considered. Although no set-aside designation or point of contact is listed, the contract is accessible through the DIBBS platform at the provided URL, where detailed specifications and submission guidelines must be reviewed. Packaging and traceability are implied as essential elements given the DLA standards referenced, and delivery timelines are expected to align with defense supply chain protocols.
Sheet Metal Work Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484121
New
DIBBS
Domestic and International Freight & LogisticsThe contract involves the transportation of finished rivets to destinations managed by the Defense Logistics Agency, requiring both domestic trucking services and international shipping via U.S.-flagged vessels to comply with maritime regulations. All logistics must be executed efficiently to meet delivery timelines for military and defense applications, ensuring compliance with federal transportation and cargo safety standards. The work will primarily originate from or serve the Hill Air Force Base area with a zip code of 84056-5734, and the scope demands seamless coordination between land and sea transport modes to fulfill contractual obligations. This is a subcontract under the NAICS code 484121, which classifies it as a motor transport industry service. It was posted on August 5, 2026, with responses due by August 13, 2026, and is managed by the ASC Commodities Division within the Department of Defense. The contract does not specify a set-aside designation, and while no point of contact details are provided, the request for quotation is accessible through the DIBBS portal for qualified subcontractors to submit proposals. Participation requires the ability to handle both domestic and overseas freight under strict regulatory frameworks governing defense supply chain movements.
General Freight Trucking, Long-Distance, Truckload

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & Reporting (NIST SP 800-171)The contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 for systems that process, store, or transmit covered defense information. This includes ensuring all required technical, operational, and management safeguards are properly configured, monitored, and documented to meet federal cybersecurity standards. Compliance is mandatory and must be sustained throughout the contract period, with continuous assessment and remediation of any gaps or deficiencies identified through internal audits or external evaluations. In addition to control implementation, the contract mandates immediate reporting of any cybersecurity incidents affecting covered defense information in accordance with DFARS 252.204-7012. This includes notifying the appropriate government authorities within required timeframes and providing detailed incident documentation, analysis, and corrective actions. Performance is tied to Hill Air Force Base with the NAICS code 541512 indicating information technology consulting services. As a subcontract, the work is part of a broader defense acquisition effort under the Department of Defense, with responses due by August 13, 2026, and the solicitation posted on August 5, 2026.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
Defense-Compliant Packaging and MarkingThis contract requires the packaging and labeling of rivets in strict accordance with MIL-STD-129 and ASTM D3951 standards, ensuring all materials are properly preserved and unitized to meet DLA Master List requirements. The work must be executed to maintain military-grade integrity throughout handling, storage, and transportation, with all markings and documentation fully compliant with federal defense specifications. The packaging process includes proper identification, barcoding, and containment that align with the Department of Defense’s logistical protocols. The contract is issued under the NAICS code 561910 as a subcontract by the ASC Commodities Division of the Department of Defense, with performance expected at Hill Air Force Base, Utah, ZIP 84056-5734. Proposals must be submitted by August 13, 2026, with the solicitation posted on August 5, 2026. All bidders must demonstrate capability to meet exacting defense packaging standards and have the infrastructure to support timely, accurate, and traceable delivery of military-grade components in full compliance with applicable regulations.
Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & Inspection ServicesThird-party inspection services are required to validate compliance of rivet lots against MIL-STD-1916 standards, encompassing detailed evaluations of critical, major, and minor attributes to ensure product integrity and performance. Each shipment must be accompanied by a Certificate of Conformance documenting that all inspection criteria have been met and verified through approved quality procedures. The contract is issued as a subcontract under the NAICS code 541330 by the ASC Commodities Division of the Department of Defense, with performance required at Hill AFB, Utah, 84056-5734. Bidders must submit proposals by August 13, 2026, following the solicitation posted on August 5, 2026, through the DIBBS platform.
Engineering Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details