Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CABLE ASSEMBLY, RADI

Active
SPE4A6-26-T-11EBFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a radio frequency cable assembly under solicitation SPE4A6-26-T-11EB, with a quantity of five units to be delivered within 20 days to Naval Station Newport, Rhode Island, FOB origin. All items must comply with stringent technical, quality, and packaging standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must adhere to MIL-STD-2073-1E preservation, MIL-STD-129 marking, and DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item is designated as a critical application with source approval requirements and must be traceable throughout delivery, prohibiting parcel post in favor of certified freight methods. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds in the product, packaging, preservation, or marking, with limited exceptions for functional components such as batteries or instruments specified by NAVSEA, which must include secondary containment. Packaging must meet palletization guidelines and use only approved materials, with special attention to the prohibition of mercury in any preservation or packing materials. The NSN 5995017220586 is the sole identified material, with a fixed quantity and no variance allowed. Shipments must be directed to the designated military address, labeled appropriately, and delivered by the required delivery date of July 22, 2026. The contract is managed by the Department of Defense’s ASC Commodities Division, with point of contact Ernest Penrose, and the NAICS code 335931 applies to the nature of the product being procured.

General Info

Five RF cable assemblies, NSN 5995017220586, due July 22, 2026, to Naval Station Newport, compliant with MIL-DLA standards, no mercury.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

1176 HOWELL ST, NEWPORT, RI, 02841-1703, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11EB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Ernest Penrose
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,RADI
CABLE ASSEMBLY, RADIO FREQUENCY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
CRITICAL APPLICATION ITEM
HUBER+SUHNER ASTROLAB, INC. 16301 P/N 32024E-29094CR-29088CR-6
SPE4A6-26-T-11EB
SECTION B
PR: 7017607382 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017607382 0001 EA 5.000
NSN/MATERIAL:5995017220586
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
N66604
NUWC DIV NEWPORT
1176 HOWELL ST
NEWPORT RI 02841-1703
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N66604
NUWCDIVNPT
NAVAL STATION NEWPORT
47 CHANDLER ST BLDG 47
NEWPORT RI 02841-1709
US
M/F: (TCN) N6660461985377
RDD: 219
SPE4A6-26-T-11EB
SECTION B
PR: 7017607382 PRLI: 0001 CONT’D
PROJ: TV4 TP 3
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 09
DIC: A4A DIST: E9B ADV: 2L FC: DT
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
SPE4A6-26-T-11EB NSN/Part Number: 5995-01-722-0586 Quantity: 5 EA Purchase Request: 7017607382QTY: 5 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE4A7-26-T-606A
This contract specifies the procurement of five terminal lugs with NSN 5940-01-008-6727 under solicitation SPE4A7-26-T-606A, which is a total small business set-aside with a NAICS code of 335931. Delivery is required within 20 days after award, and responses must be submitted by August 10, 2026. The item is subject to comprehensive technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. All items require physical identification or bare part marking in accordance with specified guidelines. Sampling and inspection follow MIL-STD-1916 or an approved zero-based equivalent, with verification levels and AQLs assigned based on attribute criticality unless otherwise stated. Zero non-conformances are required for acceptance unless the contract specifies otherwise. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location. Access is limited to contractors with approved JCP certification, completed DOD training, and formal DLA authorization. DFARS 252.225-7048 applies, and covered defense information is protected under RD003. The contracting office is the Department of Defense, specifically ASC Supplier Operations AE and AF Division, with Jessica Gentry as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE4A0-26-T-4128
The item is a TERMINAL, LUG with NSN/Part Number 5940-01-184-9276, for a quantity of 20 units, under Purchase Request 7017639108, with delivery required within five days of award. The solicitation number is SPE4A0-26-T-4128, posted on August 2, 2026, with responses due by August 10, 2026. This procurement falls under NAICS code 335931 and is managed by the Department of Defense through the Aviation Supply Chain ESOC Buys office. The point of contact is Danita Davis, reachable via email and phone provided. Technical data associated with this item is subject to export control under either ITAR or EAR, and any disclosure to foreign persons—including foreign nationals in the U.S.—requires prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required DOD export control training and the DLA questionnaire, and have received formal approval from the DLA controlling authority. DFARS 252.225-7048 governs the handling and protection of this information, and compliance is mandatory for all offerors.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EA
This contract pertains to the procurement of a cable assembly identified as RADI with NSN 5995-01-722-6071 and part number MINIBEND LR-41.00 manufactured by HUBER+SUHNER ASTROLAB, INC. A total of five units are required with a unit price of $5.00, resulting in a total contract value of $25.00, to be delivered within 20 days to the Naval Undersea Warfare Center Division Newport in Rhode Island. Delivery is FOB origin and inspection and acceptance occur at the destination. The item is classified as a commercial off-the-shelf (COTS) product and a critical application item, subject to specific quality and technical requirements referenced from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Strict packaging regulations apply, requiring compliance with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes needed. Packaging must adhere to DLA requirements, prohibiting any mercury or mercury-containing compounds in preservation, packaging, or labeling, in alignment with NAVSEA 5100-003D, except for specific functional uses in batteries, sensors, or instrumentation. Parcel post is prohibited; shipping must occur via traceable means. The item is not subject to Item Unique Identification per customer request, and all documentation must follow source approval and removal of government identification protocols where applicable. The contract references precise unit of issue standards and requires delivery by July 23, 2026, with procurement governed under solicitation SPE4A6-26-T-11EA and governed by the Department of Defense through the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-364Q
The contract pertains to the procurement of an electrical plug connector with the NSN 5935-01-540-0279 and part number K5M5-AKPN from The Boeing Company or 59122WK20PN from TE Connectivity Corporation, with a total quantity of 48 units at a unit price of $48.00, resulting in a total contract value of $2,304. Delivery is required within 81 days from the award date, with FOB origin terms, and inspection and acceptance are to occur at the destination. The product must comply with all applicable DLA Master List of Technical and Quality Requirements referenced by R or I numbers, including packaging standards such as MIL-STD-129 for marking and labeling, and adherence to RP001 for DLA packaging requirements. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with corresponding verification levels or AQLs. Packaging must conform to ASTM D3951 for non-hazardous items or FED-STD-313 compliant methods if hazardous, with DLA requirements taking precedence. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is November 3, 2026, with the original delivery due by February 11, 2027. The solicitation number is SPE7M5-26-T-364Q, issued under NAICS code 335931 by the Department of Defense’s Active Devices Division, and all documentation must align with the authorized unit of issue as defined by DLA.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL BOARD
Solicitation # SPE4A7-26-T-605N
The contract specifies the procurement of a Terminal Board identified by NSN 5940-01-128-2240 and part number ST5M1379-006A, with an approved quantity of 148 units at a unit price of $148.00, resulting in a total contract value of $21,904. The item is classified as a critical application component, with approved suppliers including The Boeing Company, Trico Manufacturing Inc., RMB Miniature Bearings Inc., and Stroco Manufacturing Inc. Deliveries are required FOB origin, with inspection and acceptance occurring at the destination, and all units must be delivered within 154 days of contract award, with the original required delivery date set for January 12, 2027. The contract enforces strict adherence to the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-129 and ASTM D3951, with DLA requirements taking precedence. Sampling must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and zero non-conformances required unless otherwise stated. All packaging and palletization must comply with DLA’s RP001 requirements, and items must be marked in compliance with RQ017 for physical identification. The sole delivery address is DLA Distribution Cherry Point in North Carolina, and transportation procedures must follow DLAD Proc Notes C19 and C20. The contract includes mandatory documentation for source approval, removal of government identifiers from non-accepted items, and all requirements are governed by the DLA Master List revision in effect on the solicitation date.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CH
The contract pertains to a special-purpose cable assembly identified by part number TCI-P105/P106-18S and NSN 5995016846593, with a firm requirement for ten units to be delivered FOB origin within 207 days of the contract award. The item must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including packaging per MIL-STD-2073-1E and marking in accordance with MIL-STD-129, with no special marking required. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all supplies must adhere to DLA packaging and physical identification rules, including bare item marking. Sampling follows MIL-STD-1916 or an equivalent zero-based plan, with unspecified attributes treated as major and acceptance criteria requiring zero non-conformances unless otherwise defined. The delivery destination is the DLA Distribution San Joaquin warehouse in Tracy, California, with inspection and acceptance occurring at the point of delivery; no quantity variance is permitted. The cable assembly is procured under a federal solicitation issued by the Department of Defense’s ASC Commodities Division, with the contract number SPE4A6-26-T-11CH, response deadline in August 2026, and required ship date set for March 6, 2027.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11EC
This contract pertains to the procurement of five units of a commercial off-the-shelf cable assembly identified by NSN 5995-01-722-3415 and part number MINIBEND LR-49.00 from HUBER+SÜHNER ASTROLAB, INC., with a firm delivery requirement of 20 days from the order date. The item is designated as a critical application COTS product, and strict compliance with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 is mandated, including specific preservation, packaging, and marking procedures. Mercury and mercury-containing compounds are explicitly prohibited in the product itself and in all associated preservation, packaging, and marking materials, with limited exceptions only for functional uses in specified equipment such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, and portable devices must feature shockproof construction with a secondary containment. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Goods must be shipped via traceable freight methods to the designated naval station address in Newport, Rhode Island, excluding parcel post. All technical and quality requirements referenced by R or I numbers are governed by the current DLA Master List, with revisions tied to solicitation or award dates depending on acquisition size. Shipping documentation must include required markings and packaging codes, and the contract is issued under solicitation SPE4A6-26-T-11EC with an original required delivery date of July 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11DZ
This contract specifies a single unit of a special-purpose cable assembly with the NSN 5995-01-690-7485, to be delivered within 20 days of award under solicitation SPE4A6-26-T-11DZ. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlling based on the type of acquisition and applicable dates. Packaging must comply with DLA standards, and the item is subject to strict handling protocols including the removal of government identification from rejected supplies and mandatory bare item marking. Sampling and inspection follow MIL-STD-1916 or an approved zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively unless otherwise stated. The contractor must comply with Cybersecurity Maturity Model Certification Level 2 requirements, either through self-assessment or certification by a third-party assessment organization. The item must be free from intentional mercury or mercury compounds, with limited exceptions for specific functional components that must meet containment and safety standards per NAVSEA 5100-003D. Technical data associated with this item is controlled under ITAR or EAR regulations, restricting export and disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is limited to DLA contractors with approved JCP certification, completed training on export-controlled data handling, and formal approval by the DLA controlling authority. The procurement is managed by the ASC Commodities Division of the Department of Defense, with delivery performance expected in Groton, Connecticut, and primary point of contact being Bradley Willis.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M0-26-T-025A
The contract solicits two pressure switches under NSN 5930-01-070-3571 with a requirement for delivery within five days of award, as identified by purchase request 7017688210. The solicitation number is SPE7M0-26-T-025A, issued on August 2, 2026, with a response deadline of August 13, 2026, and falls under NAICS code 335931. The procurement is managed by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance required at Goose Creek, South Carolina, 29445-8612. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. The offeror must submit a complete data package for both the approved and alternate parts, and any government identification on non-accepted supplies must be removed. Primary point of contact is Abaigael Masterson, reachable via email and phone provided.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A0-26-T-4134
The contract pertains to the procurement of one unit of a cable assembly identified by part number 4027AS1810-02 and NSN 5995016955919, issued under solicitation SPE4A0-26-T-4134 for the Department of Defense. Delivery is required within five days of contract award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is classified as a critical application item and must comply with stringent technical and quality standards, including MIL-STD-2073-1E packaging, MIL-STD-129 marking without special codes, and DLA packaging requirements. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned the highest verification level. Cybersecurity compliance is mandated through CMMC Level 2 self-assessment, and the item is subject to covered defense information protocols. The assembly must be shipped via traceable means, excluding parcel post, to the Naval Air Station North Island delivery address in San Diego, California, with a required delivery date of July 27, 2026. The contract specifies government-only identifiers and references the DLA Master List of Technical and Quality Requirements for all incorporated R and I numbered provisions.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, PRINTED
Solicitation # SPE4A6-26-T-11FN
The contract specifies the procurement of five flexible printed cable assemblies under solicitation SPE4A6-26-T-11FN with a delivery deadline of five days after order award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issuance or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Bare items must be physically marked per RQ017. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Documentation for source approval requires adherence to RC001, and configuration changes necessitate formal engineering change proposals. Cybersecurity compliance mandates either a CMMC Level 2 self-assessment or certification by a C3PAO. The contract incorporates DFARS 252.225-7048 for export-controlled technical data, which is subject to ITAR or EAR and may not be disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. Access is restricted to contractors with approved US/Canada Joint Certification Program status, completion of DLA export control training, and formal DLA approval. Item Unique Identification is waived per the service customer’s request under DFARS 252.211-7003(c)(1)(i). The NSN is 5995-01-667-0149, with performance occurring at Tobyhanna, PA. The point of contact is Berkeley Vaughan, reachable via email and phone listed in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-11EV
The contract pertains to the procurement of a wiring harness, identified as a commercial off-the-shelf item with NSN 5995-01-731-3870 and part number 8M0158088, supplied by BRUNSWICK CORP. Five units are required at a unit price of $5.00, resulting in a total contract value of $25.00, with delivery due in 163 days from the contract date, FOB origin, and no tolerance for quantity variance. Inspection and acceptance occur at the destination point, with packaging required to comply with MIL-STD-2073-1E and marking per MIL-STD-129, including specific packaging codes and methods such as preservative treatment and unit container type E5. The delivery destination is the Defense Logistics Agency warehouse in Tracy, California, with freight handled under DLA procedural notes C19 and C20. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with version control dependent on acquisition type and amendment dates. Covered defense information may apply, and all documentation must adhere to DLA’s sourcing, packaging, and removal of government identification standards for non-accepted items. The solicitation, issued under SPE4A6-26-T-11EV, has a response deadline of August 10, 2026, with a posted date of August 2, 2026, and is categorized under NAICS code 335931 for other electrical equipment and component manufacturing, managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11GX
This contract specifies the procurement of a cable assembly with part number 941292 and NSN 6150-01-678-1631, requiring two units to be delivered within five days of contract award. The items must meet all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, enforcing zero non-conformances unless otherwise stated. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and minor at Level II with an AQL of 4.0; unspecified attributes default to major. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization adhering to DLA packaging standards. The items are designated as critical application items and must be physically identified per RQ017. Delivery is FOB origin with a zero variance tolerance, and inspection and acceptance occur at the origin. Documentation for source approval and removal of government identification from non-accepted items must follow specified procedures. The shipment is destined for the Joint Logistics Unit Vic in Bandiana, Australia, with freight handled by the Australian Government Cargo Office via DHL. The contract was issued under solicitation SPE4A6-26-T-11GX with a required delivery date of October 22, 2024, and is classified under NAICS code 335311, managed by the Department of Defense’s ASC Commodities Division.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-U-3296
This contract specifies the procurement of a screw with close tolerance, identified by NSN 5305-01-321-6120 and part number NAS1973T26T, manufactured to meet the non-government standard NAS1972 through NAS1980 Revision 7 and NAS4004 Revision 16. The item is classified as a commercial item and a critical application component requiring source inspection, with all threads of class 3A and 3B subject to dimensional verification per System 22 of FED-STD-H28/20, excluding very small internal and external threads. Manufacturing must adhere to the current revision of the applicable standard, and prior revisions are acceptable only for historically produced items. The manufacturing process requires forging, necessitating specialized tooling, and the supplier must comply with SAE AS9100 quality requirements, regardless of whether they are a manufacturer or non-manufacturer. All items must be marked per MIL-STD-130N paragraph 4.1.b(2) in addition to manufacturer logos and material identifiers, and packaged in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise specified, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The contract is a total small business set-aside under NAICS 332722, with delivery due in 108 days FOB origin, no variance permitted in quantity, and inspection and acceptance occurring at the origin. The unit of issue is each, with a quantity of 65 units, and packaging must adhere to DLA’s packaging requirements including palletization standards. The solicitation is managed by the Defense Logistics Agency and is open to responses through the DIBBS system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, HEXA
Solicitation # SPE4A6-26-T-11GS
A hexagonal plain slotted nut, identified by NSN 5310-00-849-6883, is being procured in a quantity of 14 units under a fully competitive solicitation governed by military and federal specifications. The procurement is managed by the ASC Commodities Division under the Department of Defense, with performance taking place at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation, numbered SPE4A6-26-T-11GS, was posted on August 2, 2026, with responses due by August 10, 2026, and falls under NAICS code 332722 for screw, nut, bolt, and fastener manufacturing. The delivery timeline is set at 89 days after award, and the primary point of contact for inquiries is Vincent Price, reachable via phone or email provided through the Defense Logistics Agency’s DIBBS system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CM
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-424-8044, for a quantity of four units, under solicitation SPE4A6-26-T-11CM. The required delivery timeline is 316 days after order, and the solicitation closed on August 10, 2026, with a posted date of August 2, 2026. The item falls under NAICS code 334419 and is procured by the Defense Logistics Agency’s ASC Commodities Division. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Marcita Robinson. The cable assembly is subject to stringent technical and quality requirements referenced from the DLA Master List, and must comply with DLA packaging standards. Surplus supply is explicitly not acceptable, and government identification must be removed from any non-accepted items. The item is governed by cybersecurity and export control policies, including CMMC Level 2 certification requirements for the third-party assessment organization involved, and the application of Covered Defense Information. Technical data associated with the cable assembly is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies. Access to this controlled data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and DLA’s questionnaire, and have received explicit approval from DLA authorities. DFARS 252.225-7048 governs the handling of this sensitive technical data.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, NAVIGATIONAL,
Solicitation # SPE4A6-26-T-11FH
The contract pertains to the procurement of a commercial off-the-shelf navigational marine light identified by part number 3680283000 and NSN 6220-01-729-1879, with a requirement for four units to be delivered within twenty days from the order date. The item is classified as a critical application item and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and labeling in accordance with MIL-STD-129 with the special marking code “01 - Fragile.” Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the quantity variance is strictly zero percent. The shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and is addressed to the Naval Amphibious Base Coronado in San Diego, California, with the freight address and shipment details clearly defined. The contract is issued under solicitation SPE4A6-26-T-11FH with a required delivery date of July 23, 2026, and is governed by DoD authorized unit of issue and acquisition procedures. All supplies must be free of government identification if not accepted, and government use fields indicate specific logistics and distribution codes for internal tracking.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-11CQ
The contract pertains to the procurement of one unit of a PIN, RETAINING with NSN 5315-58-002-1217 and part number MUHLD148-831 from HIAB USA INC, issued under solicitation SPE4A6-26-T-11CQ. Delivery is required within 10 days FOB origin to the US Army SSA SUSBDE APS 405TH AFSB at Leutsestraat 34, Zutendaal 3690, Belgium, with inspection and acceptance occurring at the destination. The item is to be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging and palletization must adhere to DLA’s standardized requirements, and the unit of issue is EA. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated in the sample unless otherwise specified, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Item Unique Identification is not required per service customer direction, and DFARS 252.211-7003(c)(1)(i) applies. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List, and the revision in effect at the solicitation issue date governs. The required delivery date is June 25, 2026, with no variance allowed in quantity. Transportation and shipping details align with DLAD Proc Notes C19 and C20, and the contract designates W51109 as the RDD and freight address, with government use codes and project identifiers included for tracking.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-11FE
The contract pertains to the procurement of three sleeve bearings identified by NSN 3120-01-198-2352 and part number KDJ08C015-241, with delivery required within 169 days to Robins Air Force Base in Georgia. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, and manufacturing may involve casting or forging processes, necessitating potential tooling that the government does not necessarily possess; suppliers must submit a Casting and Forging Assistance Request if needed. The bearings must comply with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 with no special marking codes applied. Unit of issue is each, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Although item unique identification is not required per the service customer’s request, physical identification and bare item marking are still mandatory. The contract is governed by DFARS clauses and DLA packaging directives, with delivery FOB origin and transportation logistics defined by DLA procedural notes. The sole approved source data includes multiple manufacturers with identical part numbers, and the contract originates from the Department of Defense’s ASC Commodities Division under solicitation SPE4A6-26-T-11FE, responding to purchase request 7012343205 with a need ship date of November 16, 2025, and an original required delivery date of March 25, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
KEY, WOODRUFF
Solicitation # SPE4A6-26-T-11HZ
The contract under reference KEY, WOODRUFF, solicitation number SPE4A6-26-T-11HZ, issued by the Department of Defense’s ASC Commodities Division, requires the delivery of 20 units of NSN 5315-01-173-9441 with a delivery deadline of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or RFP issue date for large acquisitions, unless amended. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in sampled lots unless otherwise stipulated. Documentation for source approval requests must comply with RC001 standards. The supplier is strictly prohibited from intentionally adding mercury or mercury-containing compounds to any supplied hardware or materials, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents designated by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. All supplies must be marked per physical identification requirements and government identification removed from non-accepted items. The point of contact is Samantha Hopkins, and performance is set in San Diego, CA, with responses due by August 10, 2026.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIV
Solicitation # SPE4A6-26-T-11GF
The contract entails the procurement of 300 units of NUT, PLAIN, BLIND RIV with NSN 5310-01-666-2654 under solicitation SPE4A6-26-T-11GF, with delivery required within 207 days FOB origin. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise contracted, with attributes classified per critical, major, or minor levels corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified chemical reagents; portable devices with mercury must include shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. The product shall be manufactured to TDP Rev C Gen 3 per NAS1738 Rev 6 dated 11/30/2024, and the unit of issue is each (EA) with no variance allowed in quantity. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. The contract enforces zero tolerance for non-conforming items, requires full compliance with government identification removal protocols for rejected supplies, and mandates bare item marking per RQ017. The point of contact is Molitauoleava Langi, and the solicitation closed on August 10, 2026, with an original need date of March 6, 2027.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-11GW
The contract specifies the procurement of one shoulder screw, part number SR-16 with NSN 5305-01-549-2013, under solicitation SPE4A6-26-T-11GW, with a required delivery within 20 days from the contract date. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-130N for physical identification marking and MIL-STD-129 for labeling. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with designated verification levels or AQLs. The screw must be free of intentional mercury or mercury compounds throughout its manufacturing, packaging, and preservation, except for narrowly defined functional exceptions such as batteries or sensors, and even then must meet NAVSEA containment standards. Packaging must conform to MIL-STD-2073-1E with preservation methods specified, palletization as per DLA requirements, and prohibition of mercury in any preservation or packing materials. Delivery is FOB origin to the USS HYMAN G RICKOVER (SSN 795) in Groton, CT, with shipper required to use the fastest traceable means, explicitly excluding parcel post. The contract requires CMMC Level 2 self-assessment compliance, and all markings, packaging, and documentation must precisely follow government-prescribed formats, with no variance allowed in quantity.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
STRIP WING
Solicitation # SPE4A6-26-Q-1212
The contract pertains to the procurement of one unit of a Strip Wing identified by NSN 1560-01-608-2561, with a delivery requirement of 111 days after contract award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment specifies a later revision. The item is subject to Covered Defense Information requirements and must comply with DLA packaging standards. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance must occur at the point of origin. Government identification must be removed from non-accepted supplies, and physical identification or bare item marking is required. Item Unique Identification is not mandated per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exception. Technical data associated with the item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons anywhere in the world, and DFARS 252.225-7048 is fully applicable. Access to this controlled data is restricted to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DLA training and questionnaire, and have received explicit approval from the DLA controlling authority. The solicitation number is SPE4A6-26-Q-1212, issued on August 2, 2026, with responses due by August 10, 2026, and the contracting office is the ASC Commodities Division under the Department of Defense, with Bryan Distin listed as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details