Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CABLE ASSEMBLY, SPEC

Active
SPE4A6-26-T-09NRFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of two cable assemblies under solicitation SPE4A6-26-T-09NR, with a specified delivery timeline of 166 days after contract award. Strict prohibitions are in place against the intentional addition or direct contact of mercury or mercury-containing compounds with any supplied hardware or supplies, except for specific functional applications such as batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents explicitly authorized by NAVSEA. Portable devices containing mercury must be shock-proof and equipped with a secondary containment barrier to prevent leakage, in compliance with NAVSEA 5100-003D. The contract incorporates numerous technical and quality requirements referenced via R, I, and other designator numbers from the DLA Master List, including packaging standards, inspection protocols, and quality assurance provisions applicable to both manufacturers and non-manufacturers. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are classified with corresponding verification levels or AQLs. Inspection and acceptance occur at the origin, and all government identification markings must be removed from non-accepted items. Technical data associated with this item is subject to export control under ITAR or EAR, requiring prior authorization for any transfer to foreign persons or entities, and only contractors with approved JCP certification, completed DOD training, and DLA authorization may access such data. The contract is managed by the Department of Defense under the ASC Commodities Division, with performance located in New Cumberland, PA, and primary point of contact Amanda Stewart.

General Info

Two cable assemblies procured, 166-day delivery, zero mercury contamination except authorized uses, ITAR/EAR controlled, MIL-STD-1916 inspection, JCP-certified contractors only.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-09NR.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Amanda Stewart
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,SPEC
CABLE ASSEMBLY,SPEC
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
SPE4A6-26-T-09NR
SECTION B
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6150-01-686-4924 Quantity: 2 EA Purchase Request: 7017572573QTY: 2 Delivery: 166 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
DIBBS
SENSING ELEMENT, FIRThe contract pertains to the procurement of a Sensing Element, FIR with NSN 6350375306236, issued by the Defense Logistics Agency under solicitation SPE8E8-26-T-4850. Ten individual line items, each representing one unit at a unit price of $1.00, total a contract value of $10.00, with all deliveries required FOB destination within 20 days of the contract award. The material must be packaged in compliance with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; if non-hazardous, commercial packaging must conform to ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following RP001 guidelines. Hazardous materials must adhere to TQ requirement IP025. The delivery destination is USS FT LAUDERDALE (LPD 28) at FPO AE 09595, with shipments required to be sent via traceable means using VSM and RDD 777, explicitly prohibiting parcel post. All items are to be inspected and accepted at the destination, with no quantity variance permitted. The supplier’s part numbers include CONSILIUM MARINE US INC 3EGT0 and CONSILIUM MARINE & SAFETY AB A188N, both referencing the same part number 90100040030-00A. The original required delivery date is July 22, 2026, and government-use-only fields indicate specific procurement tracking codes, including IPD, DIC, DIST, and ADV identifiers.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWERThis contract is for the procurement of a single power transformer identified by NSN 5950-01-438-0097, with delivery required within 165 days from the contract award date and a final delivery deadline of January 19, 2027. The item is classified as a critical application component subject to strict quality and traceability standards, requiring all constituent parts to originate exclusively from sources listed on the qualified products list or qualified manufacturers list as defined by applicable MIL-PRF-27/320C and MIL-PRF-27G specifications. The transformer must comply with DLA’s technical and quality requirements referenced via R and I numbers from the DLA Master List, including traceability documentation retention per DLAD Procurement Note C03, and adherence to strict configuration change management procedures. Mercury and mercury-containing compounds are prohibited in or on the component except for specified functional uses in batteries, instruments, or sensors approved by NAVSEA, with portable devices containing mercury requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The item must meet NAVAIR aircraft launch and recovery equipment traceability standards, with all bare metal surfaces marked with the contract number, NAWC CAGE, and part number as directed by associated technical drawings. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA packaging guidelines and no special marking codes applied. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination point, and no variance in quantity is permitted. The contract is issued under solicitation SPE7M2-26-T-5764 with a response deadline in August 2026 and requires compliance with DoD unit of issue standards and transportation requirements outlined in DLAD Procurement Notes C19 and C20.
NUCLEAR REACTOR PROGRAM

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESSThe contract outlines the procurement of a wiring harness identified as a commercial off-the-shelf (COTS) item with the NSN 6150-01-677-8877 and part number ED0021863220-S, supplied by SOHARS ALL SEASON MOWER SERVICE INC and LOMBARDINI U.S.A. INC. The item is classified as a critical application item with no shelf life requirement, and item unique identification is not mandated per the service customer’s request under DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements (RP001), including marking per MIL-STD-129 without special marking codes, and palletization as specified. The unit of issue is each (EA), and the quantity ordered is one unit with zero variance allowed. Delivery is required within 10 days FOB origin to the Distribution Management Office at Camp Kinser, Japan, with inspection occurring at the destination. The contract is under solicitation SPE4A6-26-T-09NX, with a required delivery date of July 1, 2026, and a response deadline of August 3, 2026. Transportation and shipment procedures must adhere to DLAD Proc Notes C19 and C20, with the freight shipping and markfor addresses both designated to M29100 Camp Kinser. The contract is managed by the ASC Commodities Division under the Department of Defense, with primary contact information provided for Lakisha Atkinson.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
BUZZERThe contract is for the procurement of 36 buzzer units with part number SC616Q and NSN 6350-01-244-7804, under solicitation SPE7M0-26-T-018E, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. The unit price is $36.00 per unit, totaling $1,296.00, with delivery required within five days of award, FOB origin, and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation, wrapping, and container codes, with marking in accordance with MIL-STD-129 and the special fragile marking code 01-01. The shipment is to be delivered to Pearl Harbor Naval Shipyard IMF at 667 Safeguard Street, Building 167-1, Pearl Harbor, HI 96860-5033, with a required delivery date of July 17, 2026, and the contract incorporates all applicable DLA technical and quality requirements referenced via R and I numbers from the DLA Master List. Transportation instructions follow DLAD Proc Notes C19 and C20, and the supplier must adhere to DLA packaging and palletization standards. The point of contact is Grace Beck, with a response deadline of August 3, 2026, and the NAICS code is 335311 for electronic component manufacturing.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESSThis contract is for a single unit of a wiring harness identified by NSN 6150-01-677-8875 and part number ED0021863240-S, classified as a commercial off the shelf item with no shelf life requirement. The item is designated as a critical application component and is supplied by two approved manufacturers: SOHARS ALL SEASON MOWER SERVICE INC and LOMBARDINI U.S.A. INC. The contract requires delivery within ten days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, containment codes, and marking standards per MIL-STD-129, with no special markings required. Palletization follows DLA packaging requirements and bulk break point M20220, with delivery addressed to the Distribution Management Office at Camp Kinser, Okinawa, Japan. The government will not apply unit identification to the item per customer request, and DFARS 252.211-7003(c)(1)(i) governs this exception. Technical and quality standards referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation issue date. The contract number is SPE4A6-26-T-09NW, with a required delivery date of July 1, 2026, and the point of contact is Lindsey Shank of the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWEThis contract is for the procurement of two cable assemblies, part number 546-2154 with NSN 6150016495399, under solicitation SPE7L1-26-T-876A, issued by the Department of Defense through the Land Supply Chain. The requirement specifies delivery within 20 days of award, FOB origin, with no variance in quantity allowed. The product must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and must not contain any Class I ozone-depleting chemicals, with any substitute chemicals requiring prior approval. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including specific marking, palletization, and intermediate container standards outlined in DLA packaging guidelines. The item is to be delivered to the Naval Supply Center in Jinhae-gu, South Korea, with freight arrangements subject to DLA procedural notes. The contract enforces strict acceptance and inspection points at origin, and the sole point of contact for inquiries is Kristina Derry. The required delivery date is July 28, 2026, and the solicitation closes on August 6, 2026.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
Power Transformer Manufacturing and SupplyThe contract mandates the design, manufacture, testing, and delivery of a military-specification power transformer identified by NSN 5950-01-699-0115, classified as a critical application item requiring strict adherence to Department of Defense standards. The transformer must comply with MIL-STD-2073-1E for packaging and storage, and MIL-STD-129 for labeling and marking, ensuring full integration into military logistics and supply systems. All work must meet the rigorous quality and performance benchmarks defined by DLA, with documentation and traceability required throughout production to guarantee reliability in operational environments. This is a subcontract opportunity under the MARITIME SUPPLY CHAIN ESOC BUYS unit of the Department of Defense, with a response deadline of August 7, 2026. The North American Industry Classification System code 335311 indicates the focus on transformer and inductor manufacturing. The place of performance and specific delivery location are not detailed, but compliance with all military handling, inspection, and documentation protocols is mandatory. The solicitation is accessible through the DIBBS platform, and bidders are expected to possess the technical capability and certification to produce defense-critical electrical components under stringent government oversight.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
Power Transformer Supply and HandlingThe contract entails the supply and comprehensive handling of two military-grade power transformers under CLIN 0001, requiring full compliance with defense logistics standards for packaging, transportation coordination, and final delivery. All activities must meet stringent military specifications to ensure operational readiness and reliability in mission-critical environments. The work is to be performed with attention to secure handling protocols and delivery timelines aligned with Department of Defense requirements, with the place of performance designated as NEW CUMBERLAND, ZIP 17070-5002. This subcontract falls under NAICS code 335311, indicating classification within transformer manufacturing, and is managed by the MARITIME SUPPLY CHAIN organization under the Department of Defense. Responses must be submitted by the deadline of July 29, 2026, with the solicitation posted on July 24, 2026 through the DIBBS platform.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWERThe contract specifies the procurement of two power transformers with NSN 5950-01-256-8550 and part number 2907767, supplied by Parker-Hannifin Corporation, OECO, LLC, and Exxelia USA, Inc., under solicitation SPE7M1-26-T-209L. Delivery is required within 164 days of contract award, with a target ship date of January 5, 2027, and an original required delivery date of April 20, 2027. Items must be delivered FOB origin with zero variance allowed in quantity, inspected and accepted at the destination, and packaged per MIL-STD-2073-1E with marking compliant to MIL-STD-129 and no special marking required. Packaging details include preservative method 41, dry climate control, GBC wrap material, and intermediate containment of 12 units per container, with the final packaging code U. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces strict adherence to DLA’s Master List of Technical and Quality Requirements, incorporates cybersecurity compliance under CMMC Level 2 self-assessment, and mandates zero tolerance for intentional mercury or mercury compounds in the supplied hardware, except for approved functional uses such as batteries, fluorescent lamps, and sensors, which must be shockproof with secondary containment per NAVSEA 5100-003D. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels or AQLs as defined. Transportation and shipping instructions reference DLAD Proc Notes C19 and C20. All procurement actions are governed by DoD unit of issue standards and the contract remains under the oversight of the Department of Defense with Ryan Snyder as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWERThis contract specifies the procurement of a single power transformer identified by NSN 5950-01-699-0115 under solicitation SPE7M0-26-Q-1099, with a firm fixed price and no tolerance for quantity variance. The item is classified as a critical application component and must comply with technical and quality requirements referenced from the DLA Master List, including adherence to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking guidelines. Mercury or mercury-containing compounds are strictly prohibited unless functionally necessary in specified exceptions such as batteries, fluorescent lamps, or instrument controls, in which case secondary containment and shock-proofing are mandatory per NAVSEA 5100-003D. The transformer must be delivered to the Military Sealift Command in San Diego, California, within 30 days after award, shipped by the fastest traceable means excluding parcel post, and FOB origin. All packaging, palletization, and labeling must conform to DLA-specific requirements, and the item is subject to inspection and acceptance at the destination. The government’s projected ship date is May 13, 2026, and contract data identifies Audrey Acuna of the Department of Defense as the primary point of contact.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWEThe contract pertains to the procurement of three electrical power cable assemblies, identified by NSN 6150016315772 and part number PC/TACPC20, under solicitation SPE4A6-26-T-07EG. Delivery is required within 80 days after the delivery order is issued, with a need ship date of October 13, 2026, and an original required delivery date of October 14, 2026. All items must be delivered FOB destination to the DLA Distribution facility in New Cumberland, Pennsylvania, with no variance allowed in quantity. The unit price is $1.00 per unit, resulting in a total contract value of $3.00. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede all other standards. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1 using a zero-based approach, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Packaging must conform to ASTM D3951, but all DLA Master List requirements take precedence, and palletization must comply with RP001. Marking and labeling must adhere to MIL-STD-129, including barcoding per Data Matrix or linear standards, with bare item marking per RQ017. Removal of government identification from non-accepted supplies is required, and hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard or applicable federal regulations. The contract mandates full compliance with numerous FAR and DFARS clauses, including affirmative affirmations of employment eligibility, combating human trafficking, sustainable procurement, hazardous material disclosure, and safeguarding of defense information under NIST SP 800-171 and the Cyber Incident Reporting rule. Contractors must affirm their small business status and UEI/CAGE code if applicable, and joint ventures must disclose all partner UEIs. Invoicing must be submitted exclusively through WAWF using the Invoice and Receiving Report method. Inspection and acceptance occur at the destination by the government, with quality assurance governed by the referenced standards and the DLA Master List. The solicitation prohibits additive manufacturing processes and requires submissions via DIBBS only, with no paper submissions accepted. The contract type
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECThe contract pertains to the procurement of a single cable assembly identified by NSN 6150-01-651-1941 under solicitation SPE4A0-26-T-3918, issued by the Defense Logistics Agency’s Aviation Supply Chain ESOC Buys office. Delivery is required within five days after award to the designated destination at Stork Barracks, Building 6503, Illesheim, Germany, with the item classified as a non-commercial fixed-price supply acquisition. The contract incorporates extensive regulatory and technical requirements including adherence to MIL-STD-2073-1E for packaging and preservation, MIL-STD-129 for marking and barcoding using Code 128 and Data Matrix, and compliance with DLA packaging requirements. The item is subject to export control under ITAR or EAR, mandating prior authorization for any disclosure to foreign persons or entities, and access to technical data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completed DLA training, and explicit authorization. Cybersecurity requirements demand compliance with NIST SP 800-171 and CMMC Level 2, enforced through the DFARS clause 252.240-7997 and safeguarding of covered defense information under 252.204-7008. All invoicing must be conducted electronically through Wide Area WorkFlow, and the government retains inspection and acceptance authority at the delivery point using defined AQL levels per MIL-STD-1916 or MIL-STD-105, requiring zero non-conformances for critical and major attributes. Offerors must submit representations regarding small business status, unique entity identifiers, CAGE codes, and compliance with anti-trafficking, employment eligibility, sustainable products, and hazardous materials prohibitions including the ban on hexavalent chromium. The contract includes clauses addressing subcontracting, payment acceleration for small businesses, unauthorized obligations, contract changes, and electronic submission of payment documents, with all provisions governed by a deviation 2026-00038 that updates multiple FAR and DFARS clauses to standardize compliance. Technical data referenced in the solicitation must be accessed only through the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date governs compliance. No evaluation factors are disclosed in the available documentation, and contract pricing details are not populated in the CLIN schedule,
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIALThe contract pertains to a special purpose electrical cable assembly identified by part number SFV.L01.47 and NSN 5995-01-727-7502, with a quantity of ten units required. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced specifically by R and I numbers, and compliance is mandatory. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging standards, with marking following MIL-STD-129 and no special marking codes applied. The item is classified as a critical application item, requiring strict quality controls. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted in the sample lot unless otherwise stipulated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Delivery is due within 150 days from the order date, with FOB origin terms and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The unit of issue is each, with no quantity variance permitted. Transportation guidelines are referenced under DLAD Proc Notes C19 and C20, and the freight destination matches the parcel post address. The contract was issued under solicitation SPE4A6-26-T-09SX, with a response deadline in August 2026 and a required ship date of January 1, 2027, and original delivery date of April 29, 2027. Documentation for source approval, removal of government identification from rejected items, and compliance with all referenced standards is required, and the point of contact for inquiries is Angela Boyce of the Department of Defense’s ASC Commodities Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of 200 flat washers identified by NSN 5310-00-596-7771, with a delivery requirement of 20 days after delivery order issuance. The solicitation number is SPE4A6-26-T-09PS, issued on July 26, 2026, with responses due by August 3, 2026. The item falls under NAICS code 332722 and is managed by the ASC Commodities Division within the Department of Defense. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the washers must comply with RQ017, ensuring adequate marking with required data. The primary point of contact is Michael Blain, reachable via email and phone for procurement inquiries.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, INTERNALLY RELIEVThe solicitation requires the delivery of one unit of item 5306/12980817 within 180 calendar days from contract award for government-first article testing at Hill Air Force Base, with written notification of approval, conditional approval, or disapproval to follow within 180 days of receipt. The contractor must not supply covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must comply with domestic sourcing restrictions under the Berry Amendment and Buy American Act, particularly since the threshold has been lowered to $150,000; non-domestic materials require explicit disclosure. All offers must include current dealer or distributor certification details and must not include items produced via additive manufacturing unless pre-approved by the contracting officer. Offerors are strongly encouraged to provide quantity ranges rather than fixed quantities to accommodate fluctuating requirements and avoid administrative delays, except for Auto IDC transactions. Small business joint ventures must submit required representations for applicable statuses. Contractors must register via DLA’s new AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, with WebService users needing schema updates by the specified deadline. Failure to comply with any clause, including submission of a “No Bid” notice for anticipated late responses, may impact eligibility. The contract is for 10 units of a bolt with NSN 5306-01-298-0817, to be delivered 526 days after award, with a response deadline of August 3, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for the procurement of 257 packages of machine screws, each package containing 50 screws, identified by NSN 5305-00-113-3732 and part number MS27039C0805, meeting the technical standards of NASM27039 Revision NR 6 and referenced quality assurance provisions including QAP-EQ003. The item is classified as a commercial item and a critical application item, requiring strict compliance with detailed quality, inspection, and packaging requirements. Quality conformance is governed by RQ006 and RQ009, with inspection and acceptance occurring at destination, and the manufacturer must provide a Certificate of Quality Compliance per DD Form 1423. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on their criticality. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and marking must align with MIL-STD-130N unless otherwise directed, with no special marking required. Suppliers must be on the Qualified Suppliers List for Troop Support, and government identification must be removed from non-accepted items. Delivery is FOB origin with a 169-day delivery window, and no quantity variance is permitted. The Technical Data Package references specific revisions of commercial and military standards, and all quality and inspection procedures are tied to the DLA Master List of Technical and Quality Requirements. Contract Data Requirements Lists apply, and the manufacturer must adhere to tailored higher-level quality requirements including authorized Certificate of Conformance procedures unless overridden by a quality assurance letter. The unit of issue is PG, effective February 1, 2023, and the contract falls under solicitation SPE4A6-26-T-09PA, issued by the Department of Defense through the ASC Commodities Division. The point of contact is Lisa Harvie, and the place of performance is Hill AFB, Utah. The item is subject to covered defense information provisions under RD003 and requires full adherence to all referenced standards and procedures without exception.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVETThe item specified is a threaded pin-rivet with NSN 5320-00-869-1498, with a total quantity of 36,805 units required under solicitation SPE4A6-26-T-09QW, which is a total small business set-aside classified under NAICS code 332510. The contract is issued by the Department of Defense through the ASC Commodities Division, with performance delivery expected at Cherry Point, North Carolina, within 275 days after delivery order. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and the primary point of contact is Summer Allen, reachable via email and phone provided. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location, including foreign national employees and overseas subsidiaries of U.S. firms. Access is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA to handle such data. DFARS 252.225-7048 governs the handling and safeguarding of this information, and all contractors must comply with these requirements to be eligible for award or performance under this contract.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract is for the procurement of 198 shear bolts with NSN 5306-01-223-9520 under solicitation SPE4A6-26-T-09SU, set aside exclusively for Service-Disabled Veteran-Owned Small Businesses. The contractor must deliver two units of the item within 120 calendar days from contract award to the Government’s receiving location at Fleet Readiness Center East in Cherry Point, North Carolina, for mandatory first article testing as required by FAR 52.209-4 and Alternate I. The Government will evaluate these units and provide written notification of conditional approval, approval, or disapproval within 180 calendar days of receipt. These first article units are not counted toward the production quantity and will be retained by the Government either as a manufacturing standard or destroyed during testing. The full order of 198 units must be delivered within 61 days after delivery order issuance, and Fast Pay is not applicable. The item is classified under NAICS 332722, and the contracting office is the ASC Commodities Division within the Department of Defense. All responses must be submitted by August 3, 2026, and the contractor must provide details of current dealer or distributor certification or accreditation, along with evidence of equivalent capability if proposing an alternative to the specified part.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 24 units of a screw, cap, socket head, identified by NSN 5305-01-688-0532 and part number FTH1085-10-2-11, supplied by Fastener Technology Corp. The item must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition type. Packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking required, and palletization as specified in RP001. Inspection and sampling follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The item is to be delivered FOB origin within five days, with no variance allowed in quantity, and shipped via the fastest traceable means—parcel post is prohibited. Delivery is directed to Tobyhanna Army Depot, Pennsylvania, with destination inspection and acceptance. The contract includes government-specific identifiers and shipping labels, and the point of contact for inquiries is Lisa Harvie. All requirements are governed by DLA directives and standard military specifications, with strict adherence to traceability, documentation, and compliance controls.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
SPACER, BALLThe contract is for the procurement of 186 units of a spacer, ball item with NSN 1440-00-961-5057 and part number 29-13703-3, sourced under solicitation SPE4A6-26-T-09RU. Delivery is required FOB origin within 117 days from the contract award, with a mandatory ship date of November 29, 2026, and an original delivery deadline of December 4, 2027. The item is designated as a critical application and must comply with all DLA Master List of Technical and Quality Requirements referenced by R-numbers, which supersede all other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and no government identification may be removed from non-accepted supplies. Unit of issue is each, with zero variance allowed in quantity. Inspection and acceptance occur at destination. Quality assurance is governed by tailored and non-tailored higher-level requirements, including ISO 9001:2015 for both manufacturers and non-manufacturers. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Measuring and test equipment must meet RT001 specifications. The item does not require Unique Identification per DFARS 252.211-7003(c)(1)(i). All packaging must be marked and labeled per MIL-STD-129 and delivered to the designated receiving facility in Tracy, CA, with transportation logistics governed by DLAD procedural notes C19 and C20. The solicitation was issued July 26, 2026, with responses due by August 3, 2026, under the NAICS code 334419, and is managed by the Department of Defense’s ASC Commodities Division.
Other Electronic Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
SCREW, MACHINEThe contract pertains to the procurement of 10 machine screws with NSN 5305-01-057-0304 under solicitation SPE4A6-26-T-09RL, issued by the Defense Logistics Agency’s ASC Commodities Division. Technical data for this item is not currently available in an approved package due to proprietary or insufficient information, precluding competitive procurement. The requirement incorporates referenced technical and quality specifications from the DLA Master List of Technical and Quality Requirements, with version control determined by the solicitation issue or award date depending on acquisition size. Export control restrictions apply to associated technical data under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including U.S. subsidiaries, and require compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DLA training, and explicit authorization. Packaging must meet DLA standards and inspection and acceptance occur at the manufacturer’s origin. Item unique identification is not required as per customer directive, and government markings must be removed from rejected items. The delivery schedule requires fulfillment within 923 days after order placement, with performance occurring at Robins Air Force Base, Georgia. The solicitation closes on August 3, 2026, and is subject to cybersecurity maturity certification level 2 compliance for third-party assessors.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract specifies the procurement of 20 units of a hexagon cap screw, identified by NSN 5305-01-657-6697 and McMaster-Carr part number 92965A581, under solicitation SPE4A6-26-T-09RJ. Delivery is required within five days of award, FOB origin, with no quantity variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation method 33, dry climate control, and unit packaging coded as BV with intermediate container E5; marking must follow MIL-STD-129 with no special marking required. The product must be palletized per DLA packaging requirements, and shipping must use the fastest traceable means, excluding parcel post. The delivery address is Bldg 810 Dive Locker in Birmingham, AL, with a mandatory government use designation and specific tracking identifiers. The technical and quality requirements referenced throughout the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on the acquisition size. Sampling protocols require adherence to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances accepted unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. The contract enforces strict compliance with DoD unit of issue standards and incorporates additional requirements including the removal of government identification from non-accepted supplies. The point of contact for inquiries is Dana Barefoot, and the solicitation response deadline is August 3, 2026, with an original required delivery date of July 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThis contract pertains to the procurement of machine screws identified by part number JWA82272 and NSN 5305-01-616-2120, with a unit of issue defined as a package containing 31 screws. A total of 39 packages are required, to be delivered FOB origin within 111 days, with no tolerance for quantity variance. Acceptance and inspection both occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container details. Marking follows MIL-STD-129 without special codes, and palletization adheres to DLA packaging requirements. The screws must not contain or come into direct contact with mercury or mercury compounds except for specified functional uses such as batteries, lighting, sensors, or naval instrumentation, with additional containment requirements for portable devices. Sampling and quality verification must follow MIL-STD-1916 or an equivalent zero-based plan, with attributes assigned strict acceptance levels unless otherwise indicated. Documentation for source approval, removal of government identification from non-accepted items, and material compliance are all governed by referenced DLA master requirements. Delivery is directed to DLA Distribution Warner Robins at Robins AFB, Georgia, with the required ship date set for November 23, 2026, under solicitation SPE4A6-26-T-09SG.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROLThis contract pertains to the procurement of 13 units of Hamilton Sundstrand Corporation part number 772028, identified by NSN 3040-01-478-2006, under solicitation SPE4A6-26-T-09RD. Delivery is required within 166 days of award, with FOB origin terms and inspection and acceptance occurring at the destination point in San Diego, California. The contract enforces strict adherence to the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and all items must be palletized accordingly. While Unit Unique Identification is not mandated, the item is classified as a Critical Application Item requiring high reliability. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes requiring verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and any covered defense information is subject to applicable controls. The unit of issue is each (EA), with no tolerance allowed for quantity variance. The delivery deadline is set for August 29, 2027, though an earlier ship date of January 17, 2027 is requested. All documentation and compliance obligations are governed by DLA’s official requirements and referenced standards.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details