Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CABLE ASSEMBLY, SPEC

Active
SPE4A6-26-T-12QCFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a cable assembly identified by NSN 6150-01-631-1300 and part number PT107173, with a total quantity of six units to be delivered under solicitation SPE4A6-26-T-12QC. Delivery is required within 67 days of contract award, with the original required delivery date set for October 19, 2026, and the item must be shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container specifications. Marking shall conform to MIL-STD-129 with no special marking required, and palletization must adhere to DLA packaging requirements. The shipping and delivery address is the DLA Distribution San Joaquin warehouse in Tracy, California. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with sampling protocols mandated to follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated in the contract. Attributes are classified with verification levels or AQLs, and unspecified attributes default to major. Covered defense information may apply, and while item unique identification is not required, DFARS 252.211-7003(c)(1)(i) remains applicable. The contract specifies the use of the DoD unit of issue and references official guidance for ANSI X12 conversion. The purchasing request number is 7015688515, and the contract is managed under the Department of Defense’s ASC Commodities Division, with Traci Beaudoin as the point of contact.

General Info

Six PT107173 cable assemblies delivered FOB origin to Tracy, CA by October 19, 2026, per MIL-STD packaging and inspection rules.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12QC.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
TRACI BEAUDOIN
contact@example.gov

Full Description

Show more
CABLE ASSEMBLY,SPEC
CABLE ASSEMBLY,SPEC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
HUNT VALVE COMPANY, INC. 11859 P/N PT107173
HUNT VALVE ACTUATOR, LLC 48JZ3 P/N PT107173
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-12QC
SECTION B
PR: 7015688515 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015688515 0001 EA 6.000
NSN/MATERIAL:6150016311300
DELIVERY (IN DAYS):0067
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:10/19/2026 Original Required Delivery Date:10/19/2026
SPE4A6-26-T-12QC NSN/Part Number: 6150-01-631-1300 Quantity: 6 EA Purchase Request: 7015688515QTY: 6 Delivery: 67 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-U-4926
The contract is for the procurement of a transformer, power, under solicitation SPE7M1-26-U-4926, with a total quantity of 27 units at a unit price of $27.00, for a total price of $729.00. The item is identified by NSN 5950-01-562-1374 and part number 500K3296, and is subject to DLA’s Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Packaging must comply with RP001, MIL-STD-129 labeling, and Fed-Std-313 guidelines, requiring commercial packaging if non-hazardous or specific hazardous material handling if applicable. The unit of issue is each, with no variance allowed in quantity. Delivery is FOB origin with a 130-day delivery window, and inspection and acceptance occur at the destination. This is a total small business set-aside under NAICS code 335311, issued by the Department of Defense’s Maritime Supply Chain, with Bryan Fair as the point of contact. The solicitation opened on August 4, 2026, and responses are due by August 19, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE4A6-26-T-12HY
The contract pertains to the procurement of five wiring harnesses, branched, identified by NSN 6150-01-674-2839, with a delivery requirement of 381 days after delivery order. The solicitation number is SPE4A6-26-T-12HY, issued by the Defense Logistics Agency’s ASC Commodities Division, and responses are due by August 12, 2026. The item is subject to extensive technical and quality requirements referenced from the DLA Master List, including compliance with ISO 9001:2015 for both manufacturers and non-manufacturers, and adherence to DLA packaging standards. Inspection and acceptance occur at origin, and non-accepted supplies must have government identification removed. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned specific verification levels or AQLs. The technical data associated with the item is subject to export controls under ITAR or EAR, and disclosure to foreign persons, including foreign nationals in the U.S., is prohibited without authorization. Access to the controlled data is restricted to contractors with approved JCP certification, completed training, and DLA approval. Cybersecurity requirements mandate CMMC Level 2 certification by a C3PAO, and physical identification marking is required. The place of performance is New Cumberland, PA, with Victoria Burcham as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
ALARM, AUDIBLE-VISUA
Solicitation # SPE4A6-26-T-11ZU
The contract pertains to the procurement of an audible-visual alarm system identified by NSN 6350-01-528-5837 and part number N1546, with a quantity of 11 units to be delivered FOB origin within 171 days of contract award. All packaging must conform to MIL-STD-2073-1E, including specific preservation methods, materials, and unit container codes, while marking must adhere to MIL-STD-129 with no special marking required. The item is subject to DLA’s master list of technical and quality requirements, which incorporates sampling standards such as MIL-STD-1916 or ASQ H1331, mandating zero nonconformances in sampling unless otherwise specified. Critical, major, and minor attributes must be verified at levels VII, IV, and II, or with AQLs of 0.1, 1.0, and 4.0 respectively. The delivery destination is the DLA Distribution San Joaquin warehouse in Tracy, California, with freight and parcel post addresses aligned. The contract enforces strict quantity adherence with zero variance tolerance and specifies inspection and acceptance occurring at destination. The solicitation, issued under SPE4A6-26-T-11ZU, was posted on August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 335311. The point of contact is Ernest Penrose of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-12EH
This contract pertains to the procurement of LEAD, ELECTRICAL, identified by NSN 6150017023231 and part number M83413/8-G016BC, with a total quantity of 215 units delivered under solicitation SPE4A6-26-T-12EH. The item must comply with technical and quality requirements referenced in the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, TABLE 1, with zero non-conformances mandated unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery is FOB origin, with inspection and acceptance occurring at destination, and the required delivery window is 158 days from the order, with an original deadline of June 23, 2027. Packaging must adhere to DLA’s procurement guidelines, with unit containment designated as E5 and palletization governed by RP001. The consignee is DLA Distribution at the New Cumberland, PA facility, and transportation instructions reference DLAD Proc Notes C19 and C20. The contract specifies a unit price of $215.00, with no variance permitted in quantity, and the supplier must meet the need ship date of August 4, 2026. The NAICS code is 335311, and the contracting officer is Ashley Sheppard of the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-T-248K
The contract is for the procurement of a transformer, power, identified by NSN 5950000818787 and part number 9100-0342 from Keysight Technologies Inc, with a quantity of 30 units, each priced at $30.00, totaling $900.00. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance both occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. Packaging must meet MIL-STD-129 labeling standards, and if the item is classified as hazardous under FED-STD-313, it must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The item is to be palletized according to RP001 standards, and the Unit of Issue is EA with a Quantity per Unit Pack of 001. Shipping instructions direct delivery to the Distribution Management Office at Camp Kinser, Japan, with the marked-for address identical to the shipping address. Transportation guidelines reference DLAD Proc Note C19 for general freight and C20 for first destination. The original required delivery date is July 31, 2026, and the contract is issued under solicitation SPE7M1-26-T-248K, with the NAICS code 335311 and managed by the Department of Defense’s Maritime Supply Chain. The point of contact is Ryan Snyder, with email and phone details provided for inquiries.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, PULSE
Solicitation # SPE7M1-26-U-4976
The contract is for a pulse transformer identified by NSN 5950-01-297-8820 and part numbers C8839-15, X-1426, and 9-316 from approved vendors, with a total quantity of 104 units. It is issued under solicitation SPE7M1-26-U-4976 as a total small business set-aside with a NAICS code of 335311, and is managed by the Department of Defense’s Maritime Supply Chain. The item is classified as a critical application product and must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging, marking, and shipping standards per MIL-STD-2073-1E and MIL-STD-129. Special marking requirements include the “Fragile” designation, and packaging must follow specified methods including dry preservation, CA wrap material, and internal containment with a unit quantity of 100 per intermediate container. Delivery is FOB origin with a 112-day delivery window, and inspection and acceptance occur at the destination. No quantity variance is permitted. The contract is subject to DLA packaging and acquisition policies, and the government retains the right to remove identification from non-accepted supplies. The point of contact is Bryan Fair, and responses are due by August 19, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE4A6-26-T-12FM
The contract specifies the procurement of 13 units of a branched wiring harness with NSN 6150-01-674-5930, under solicitation SPE4A6-26-T-12FM, with a response deadline of August 12, 2026, and delivery required 261 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item is subject to defense export control regulations under ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons, including foreign nationals within the U.S., without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies, and only DLA contractors with approved US/Canada Joint Certification Program status, completed mandatory export control training, and approved access through the DLA questionnaire may handle the data. Packaging must comply with DLA standards, inspection and acceptance occur at origin, and government identification must be removed from non-accepted items. The place of performance is New Cumberland, Pennsylvania, with the primary point of contact being Thanh Hue Nguyen of the ASC Commodities Division under the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
ALARM ASSEMBLY
Solicitation # SPE4A6-26-T-11TU
The contract pertains to the procurement of two Alarm Assembly units under solicitation SPE4A6-26-T-11TU, with a delivery deadline of 171 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Inspection and acceptance must occur at origin, and non-accepted supplies must have all government identification removed. Sampling must comply with MIL-STD-1916 or ASQ H1331, Table 1, or another zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in samples unless otherwise stated. The assembly must not contain intentionally added mercury or mercury compounds, except in specified functional components such as batteries, fluorescent lamps, instruments, controls, weapon systems, or NAVSEA-approved chemical reagents; portable lamps and instruments with mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. The supplier must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified by an accredited C3PAO. Physical identification of items must be clearly marked, and all technical data associated with the item is subject to export control under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons or entities. Access to such data is restricted to contractors with approved JCP certification, validated training on handling DOD export-controlled data, and explicit DLA approval. The NSN is 6350-01-081-7234, and the purchase request number is 7017739843.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLY
Solicitation # SPE7M1-26-T-248X
This contract requires the delivery of one power supply unit with NSN 6120-01-624-4579 under solicitation SPE7M1-26-T-248X, with a firm delivery deadline of 20 days from award and FOB origin terms. The item must comply with stringent environmental and material restrictions: Class I ozone-depleting chemicals are strictly prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized by specification. Mercury and mercury-containing compounds are banned from direct contact with the hardware except for specific exempted applications such as functional batteries, fluorescent lights, sensors, weapon systems, or Navsea-specified reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier as mandated by NAVSEA 5100-003D. All packaging must adhere to ASTM D3951 and MIL-STD-129 standards, with palletization conforming to DLA’s RP001 requirements, and the Unit of Issue and Quantity per Unit Pack must match the contract exactly. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The unit is to be shipped to MCAS Futenma, Okinawa, Japan, with all shipping and transportation protocols governed by DLAD PROC Notes C19 and C20. The required delivery date is July 31, 2026, with no variance permitted in quantity.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12BY
This contract pertains to a special-purpose electrical cable assembly identified by NSN 0001S00000061, with a quantity of one unit, to be delivered within 231 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed prior to return. Sampling protocols require MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0, while unspecified attributes default to major. Zero nonconformances are required in sampling unless otherwise stated, and the manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless contract dictates otherwise. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior authorization from the Department of State or Commerce; DFARS 252.225-7048 applies. Access to controlled data is limited to DLA contractors who hold JCP certification, have completed mandatory export control training, and have been formally approved by DLA. The solicitation number is SPE4A6-26-T-12BY, issued on August 4, 2026, with responses due by August 12, 2026, under NAICS code 335311, and performance is designated for New Cumberland, PA. Primary point of contact is Kory Walker, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
SUPPORT, MAINTENANCE
Solicitation # SPE4A6-26-T-12NL
The contract pertains to support and maintenance services for a defense logistics requirement involving 100 units of NSN 6350-01-107-4290, with delivery required within five days after delivery order issuance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicable revisions tied to the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, and attributes must be verified at designated levels: VII for critical, IV for major, and II for minor, corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Any unspecified attributes are treated as major. The item includes technical data subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved JCP certification, validated training on DOD export-controlled data handling, and formal DLA approval. The solicitation number is SPE4A6-26-T-12NL, posted on August 4, 2026, with responses due by August 12, 2026, under NAICS code 335311, managed by the ASC Commodities Division of the Department of Defense, and the point of contact is Daniel Bailey at daniel.bailey@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-U-4911
The contract is for the procurement of 25 power transformers identified by NSN 5950-01-266-6276 and part number M27/66-05, compliant with MIL-PRF-27/66E revision E dated January 2, 2025. The solicitation number is SPE7M1-26-U-4911, issued under the Department of Defense via the Maritime Supply Chain, with a response deadline of August 19, 2026. Deliveries are required within 111 days after order award, shipped FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must adhere to MIL-STD-2073-1E with marking per MIL-STD-129 and no special marking requirements. The item is covered under DLA Direct, CONUS, and purchased using the DoD unit of issue. Strict environmental and safety standards apply: the use of any Class I ozone-depleting substances is prohibited in design, manufacturing, or testing unless expressly approved in writing by the contracting officer, and mercury or mercury-containing compounds are banned from direct contact with the transformer unless part of permitted functional components such as batteries, fluorescent lamps, sensors, or weapon systems. Portable devices containing mercury must have shockproof construction and a secondary containment boundary as specified by NAVSEA 5100-003D. Commercial items and part-numbered-only items are exempt from the ozone-depleting substance restriction. Full and open competition applies, and all technical and quality requirements referenced are governed by the DLA Master List, with revisions aligned to the solicitation issue date. Contact for inquiries is Bryan Fair at DLA with phone and email provided.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance and Technical Compliance SupportThe contract titled Quality Assurance and Technical Compliance Support encompasses a range of quality control, testing, and documentation services designed to ensure full adherence to military standards. This includes the preparation and management of Material Safety Data Sheets, detailed inspection reports, and comprehensive traceability systems to guarantee the integrity and compliance of all materials and processes. The work is critical to maintaining defense-grade quality and regulatory alignment across the supply chain, requiring strict procedural discipline and technical expertise. This is a subcontract under a Total Small Business Set-Aside as defined by the SBA, with the NAICS code 541330 indicating its classification under engineering services. The solicitation is managed by the ASC Commodities Division within the Department of Defense and is open for response until August 19, 2026, with the original posting date of August 4, 2026. The place of performance and specific location details are not specified, but all deliverables must meet the rigorous technical and administrative requirements demanded by military specifications. Participation is restricted to small businesses qualifying under the SBA’s set-aside program.
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
Logistics and Worldwide Distribution SupportThe contract titled Logistics and Worldwide Distribution Support is a small business set-aside subcontract under the SBA program, assigned the NAICS code 493190 for warehousing and storage, and issued by the ASC Commodities Division within the Department of Defense. It requires comprehensive global coordination of shipping, storage, and order fulfillment for cable assemblies, ensuring timely delivery to DLA depots while maintaining strict federal logistics compliance. The contractor must manage inventory levels, track shipments across international borders, and adhere to all military supply chain protocols, including documentation, reporting, and regulatory standards for defense-related materials. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and the performance location spans worldwide, with no specific city or state designated. The work demands end-to-end supply chain visibility, reliable logistics infrastructure, and proven experience in supporting federal defense operations. Only small businesses are eligible to bid, and the successful vendor will be responsible for end-to-end execution from warehouse receipt to depot delivery, with an emphasis on operational precision, accountability, and adherence to defense logistics requirements.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334419
New
DIBBS
Ribbon Cable Assembly ManufacturingThe contract seeks the manufacture and delivery of ribbon electrical cable assemblies identified by NSN 6150-01-546-7708 and part number 30-275-24H18CA, which must fully comply with applicable military specifications and DLA depot standards. The work is a subcontract under a total small business set-aside as defined by FAR 19.5, exclusively available to small business concerns certified under the SBA program. The NAICS code 334419 applies, indicating the scope involves other electronic component manufacturing, and the solicitation is administered by the ASC Commodities Division within the Department of Defense. All deliverables must meet stringent quality and performance requirements to ensure operational reliability in military applications. The solicitation was posted on August 4, 2026, with a firm response deadline of August 19, 2026. The place of performance is not specified, but the product must be delivered to meet DLA depot logistics requirements, implying compliance with military receipt, inspection, and distribution protocols. The contract is accessible via the DIBBS portal at the provided link, and all proposers are expected to adhere to federal procurement guidelines, including submission of technical, compliance, and small business certification documentation. No point of contact is listed, suggesting all inquiries must be processed through the standard DIBBS mechanisms.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561910
New
DIBBS
Specialty Packaging and Marking CorrectionThe contract titled Specialty Packaging and Marking Correction mandates the repackaging or relabeling of gages that do not comply with military packaging and labeling standards set forth by the Department of Defense. This includes correcting any discrepancies in National Stock Number labeling, CAGE code information, and barcode formatting to ensure full alignment with DoD requirements. The work must be performed to precise specifications to guarantee traceability, compliance, and readiness for military use. This is a small business set-aside subcontract under the SBA’s Total Small Business Set-Aside program, categorized under NAICS code 561910, which pertains to other support activities for agriculture and mining. The opportunity was posted on August 4, 2026, with responses due by August 18, 2026. The contracting activity is managed by the ASC Commodities Division under the Department of Defense, and performance will occur at locations designated by the government. Potential offerors must be certified small businesses eligible for the set-aside and prepared to meet all technical and regulatory demands associated with military-grade packaging and marking correction.
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541380
New
DIBBS
Calibration and Testing Services for Critical Application ItemsThe contract outlines services for the independent calibration, functional testing, and certification of pressure gages to meet rigorous military performance standards, ensuring all equipment is traceably validated before delivery. These activities are critical to maintaining the integrity and reliability of components used in defense applications, with all work requiring adherence to specified technical requirements and documentation protocols to guarantee compliance. The services must be performed by qualified entities capable of delivering precise, auditable results that support mission-critical operations. This is a total small business set-aside subcontract under NAICS code 541380, designated for small businesses and managed by the ASC Commodities Division within the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, and is available through the DIBBS platform. Performance location and point of contact details are not specified, but the scope emphasizes nationwide delivery of certified pressure gages meeting DoD quality assurance benchmarks. All contractors must demonstrate capability in handling sensitive calibration and testing procedures aligned with federal military specifications.
Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
Precision Pressure Gage ManufacturingThe contract pertains to the manufacture and delivery of a precision pressure dial indicating gage, identified by NSN 6685-01-165-8961, built to meet strict military specifications. The required unit is modeled after P/N 11006 from 3D Instruments, LLC DBA Sierra, an approved supplier, ensuring compliance with performance, durability, and accuracy standards mandated for military applications. This is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses certified by the SBA, with the NAICS code 334519 indicating classification under Other Instrument Manufacturing. The procurement is managed by the ASC Commodities Division under the Department of Defense, with a response deadline of August 18, 2026, and the solicitation posted on August 4, 2026. Delivery locations and point of contact details are not specified in the provided data, but performance is expected to align with defense logistics requirements.
Other Measuring and Controlling Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Defense Telecommunications Equipment ScreeningThe contract seeks technical review and certification services to ensure that telecommunications equipment supplied under the agreement complies with DFARS 252.204-7016 and Section 889 of the National Defense Authorization Act, which prohibit the use of equipment from foreign adversaries. The vendor must verify that all telecommunications products do not originate from or contain components sourced from entities designated as covered foreign adversaries, such as Huawei, ZTE, and other specified organizations, to safeguard national security interests. Compliance requires thorough documentation, supply chain tracing, and formal attestation confirming adherence to federal regulations governing the procurement of secure telecommunications infrastructure. The subcontract is issued by the ASC Commodities Division under the Department of Defense with a NAICS code of 541330, indicating it pertains to other scientific and technical consulting services. The opportunity was posted on August 4, 2026, and responses are due by August 19, 2026. The place of performance and specific agency location are not detailed, but the work is expected to support defense-related telecommunications systems. All proposers must demonstrate capability to conduct rigorous technical evaluations and provide legally defensible certification statements. The contract is open for bidding through the DIBBS platform and does not include any set-aside provisions for specific business categories.
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Compliance & Representations Management (Supplier Onboarding Support)The contract supports the prime contractor in ensuring supplier compliance with federal regulations, focusing on key administrative and regulatory obligations such as SAM representations, annual certifications, and adherence to FAR and DFARS clauses. It involves managing the supplier onboarding process to verify that all subcontractors and vendors meet federal requirements prior to engagement, reducing compliance risk and maintaining eligibility for DoD contracts. The scope includes ongoing monitoring and documentation of supplier representations to ensure continuous compliance throughout the contractual relationship. This subcontract is issued by the ASC Commodities Division within the Department of Defense under NAICS code 541611 for administrative management services. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, and the place of performance is not specified, indicating potential nationwide or virtual performance. The work is not subject to a specific set-aside designation, and while the point of contact information is not provided, the official solicitation can be accessed through the DIBBS system using the provided link.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 423690
New
DIBBS
Small Business Subcontracting Support (Flow-Down Requirement)The contract outlines participation as a small business subcontractor under a flow-down requirement to provide commercial products or services to the Department of Defense, specifically under the ASC Commodities Division. It mandates adherence to all applicable Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, ensuring compliance with federal subcontracting standards. Accelerated payment terms are included to support small business cash flow, reinforcing the government’s commitment to timely compensation for subcontractors meeting contractual obligations. The solicitation is posted under NAICS code 423690, which pertains to other miscellaneous durable goods merchant wholesalers, indicating the nature of the commercial goods or services involved. The response deadline is August 19, 2026, with the opportunity posted on August 4, 2026, and is structured exclusively as a subcontracting opportunity without a specified set-aside classification. Performance location details are unspecified, but the contract is administered through the Defense Logistics Agency’s DIBBS platform, where all documentation and submissions must be accessed and completed via the provided online portal.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 423490
New
DIBBS
Supply of Part-Numbered Commercial Items (CAGE Code-Based Procurement)The contract mandates the supply of specific commercial items identified by unique part numbers and CAGE codes, requiring full compliance with detailed technical and logistical specifications. This includes proper packaging, handling, and delivery protocols to ensure items meet all quality and readiness standards outlined in the procurement requirements. The items are intended for use under the Department of Defense through the ASC Commodities Division, with performance expected to align with defense-grade logistical workflows. Subcontractors must respond by the deadline of August 19, 2026, with bids submitted through the designated DIBBS portal. The North American Industry Classification System code 423490 indicates this involves merchant wholesalers of hardware, plumbing, and heating equipment, suggesting the items are standard commercial components utilized in military applications. There is no set-aside designation, meaning all eligible contractors may compete, and performance location details are not specified, implying flexibility in delivery logistics as long as contract terms are met.
Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
DIBBS
Supply of Fasteners (NSN 5307-01-212-4400)The contract pertains to the manufacture or supply of standardized fasteners identified by NSN 5307-01-212-4400, specifically for integration into defense systems. As a commercial item procurement, it mandates strict adherence to military specifications and federal supply chain standards to ensure compatibility, reliability, and interoperability within military equipment. The item falls under NAICS code 332312, classifying it as a manufacturing activity related to screw, bolt, and fastener production, and is being procured under a subcontract mechanism by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, providing vendors with a two-week window to submit proposals. While no specific place of performance or point of contact is detailed, the procurement is governed by the Defense Logistics Agency’s procurement framework, as indicated by the official DIBBS portal link. All suppliers must meet the defense sector’s quality, documentation, and delivery requirements without any set-aside provisions for small or disadvantaged businesses, emphasizing a competitive, open-market approach aligned with DoD supply chain objectives.
Fabricated Structural Metal Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334332
New
DIBBS
Cable Assembly Manufacturing and Supply (NSN 5995-01-657-9352)The contract involves the manufacture and supply of the cable assembly identified as RADI RA001 with part number 09-2830203-1 and NSN 5995-01-657-9352 to support delivery requirements for DLA depots under a firm-fixed-price structure with a five-year base period. The work is being procured as a subcontract by the ASC Commodities Division, a component of the Department of Defense, under NAICS code 334332 which pertains to communications equipment manufacturing. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, and is accessible via the DIBBS portal. Performance will be conducted in support of defense logistics operations, though specific delivery locations and point of contact details are not provided. The fixed pricing framework establishes clear financial terms while requiring consistent adherence to quality, schedule, and volume commitments over the contract term.

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details