Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

CABLE ASSEMBLY, SPEC

Active
SPE4A6-26-T-12NTFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to a special-purpose electrical cable assembly identified by NSN 5995-01-610-3272, with a requirement for two units to be delivered within 301 days from the award date. The technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Commerce, including foreign national employees and overseas subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and access to controlled data is restricted to contractors holding valid US/Canada Joint Certification Program certification, who have completed required DLA training and questionnaire and received explicit approval. The solicitation, issued under number SPE4A6-26-T-12NT on August 4, 2026, with a response deadline of August 12, 2026, falls under NAICS code 334419 and is administered by the Defense Logistics Agency’s ASC Commodities Division, with performance located in Tracy, California, and primary point of contact being Sterling Mason.

General Info

Two NSN 5995-01-610-3272 cables due in 301 days, ITAR/EAR controlled, US/Canada certification required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-12NT Request for Quotations

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA

Full Description

Show more
CABLE ASSEMBLY,SPEC
CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5995-01-610-3272 Quantity: 2 EA Purchase Request: 7017696054QTY: 2 Delivery: 301 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-5929
The solicitation SPE7M8-26-T-5929 seeks seven toggle switches identified by NSN 5930-01-136-2648, classified as a commercial item, to be delivered within 164 days after award to Cherry Point, North Carolina, under FOB destination terms. The item is designated as a critical application item tied to the Safran Power USA, LLC part number 8906K3150, and performance is governed by the DLA Master List of Technical and Quality Requirements, with specific compliance directed to R or I-numbered requirements incorporated by reference. Packaging must adhere to RP001 for palletization and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous items, while marking and labeling must follow MIL-STD-129 and the Hazard Communication Standard for any hazardous content. All deliveries are subject to destination inspection governed by FAR 52.246-2, and compliance with cybersecurity and information safeguarding standards is mandatory, including DFARS 252.204-7012 for safeguarding covered defense information and NIST SP 800-171 assessment requirements. The contract mandates compliance with the Buy American Act and Berry Amendment, with a lowered threshold of $150,000, and prohibits the use of covered defense telecommunications equipment. Payment must be processed electronically via WAWF, requiring contractor registration in SAM and WAWF systems, and includes provisions for accelerated payments to small business subcontractors and prohibitions on unauthorized obligations. The solicitation imposes strict representation and certification obligations regarding small business status, whistleblower rights, employment eligibility, trafficking in persons, and compensation restrictions for former DoD officials, with all clauses incorporating deviations effective as of February 2026. Quotations are due by August 21, 2026, and must be submitted via DIBBS to the contracting office in Columbus, Ohio, with Dondiego Boler designated as the primary point of contact.
ELECTRICAL DEVICES DIV

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
TAPE, SHIELDING, ELEC
Solicitation # SPE7M5-26-T-400T
The contract requires the supply of electrical shielding tape, identified by NSN 5999016551087 and Boeing part number 416T2211-4, with a delivery deadline of 20 days after order receipt and a requirement for Item Unique Identification (IUID) per MIL-STD-130 and DFARS 252.211-7003. The item is classified as a Type 2 (Code 4) with a 12-month extendable shelf life and must meet FAA airworthiness approval and bare item marking requirements. Supply chain traceability documentation must be retained in accordance with DLA Directive Procurement Notes C03 (August 2016), and all packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrap materials, and unit container configurations, while marking follows MIL-STD-129 with no special markings required. Palletization must adhere to DLA packaging standards, and shipments must be sent via traceable means, explicitly prohibiting parcel post. The product is subject to destination inspection and acceptance under FAR 52.246-2, with sampling based on MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. The manufacturer’s inspection system must meet ISO 9001:2015 or an equivalent standard, and the product is subject to Buy American Act and Berry Amendment constraints with a $150,000 threshold. Compliance with cybersecurity and information safeguarding requirements under DFARS 252.204-7012 is mandatory, along with prohibitions on hexavalent chromium and hazardous materials. Contractors must register with DLA’s AMPS system to access VSM and ship to DLA, and quotes must be submitted via DIBBS by August 21, 2026. Two delivery locations are specified—Altus AFB, Oklahoma, and McConnell AFB, Kansas—with both freight and parcel post addresses provided, though parcel post is forbidden. Payment must be processed electronically through WAWF, and all technical and quality requirements referenced by R or I numbers are governed by the D
ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332311
New
DIBBS
Supply of Nails (NSN: 5315006160359)The contract entails the procurement and delivery of 4,000 pounds of nails designated by NSN 5315006160359, manufactured to comply with ASTM F1667-05 specifications. All units must be packaged and labeled in strict accordance with MIL-STD-129 and DLA RP001 standards to ensure uniformity and compatibility with military logistics systems. The product is subject to a zero-defect inspection requirement for all critical attributes, leaving no room for nonconformities in dimensions, material composition, or finish. Delivery is mandated to take place at Cannon Air Force Base, with a zip code of 88103-5108, and the contract is classified as a subcontract under NAICS code 332311, which corresponds to the manufacturing of other fabricated metal products. The solicitation was posted on August 10, 2026, and responses are due by August 18, 2026, with the contracting activity managed by the ASC Commodities Division of the Department of Defense. There is no set-aside designation applied to this opportunity, meaning it is open to all eligible suppliers without preference given to small businesses or other categories. The full terms and technical requirements can be accessed through the provided DIBBS link, and while no point of contact is listed, all inquiries must be directed through the official procurement portal. Compliance with federal military standards and flawless quality control are non-negotiable prerequisites for award.
Prefabricated Metal Building and Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details