Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CABLE ASSEMBLY, SPECIAL

Active
SPE4A6-26-T-22QAFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 37 special purpose electrical cable assemblies under part number 6150-01-555-9768. The contract requires delivery within 162 days after the order is placed. Performance is centered in New Cumberland, Pennsylvania, and the procurement falls under NAICS code 334419. The contract mandates strict adherence to several technical and quality requirements, including CMMC Level 2 certification for third-party assessment and compliance with DLA packaging and marking standards. Significant restrictions are placed on the handling of technical data, which is subject to ITAR and EAR export controls. Access to this data is limited to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.

General Info

DoD procurement of 37 electrical cable assemblies delivered within 162 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-22QA.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Ernest Penrose
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICA
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6150-01-555-9768 Quantity: 37 EA Purchase Request: 7017915718QTY: 37 Delivery: 162 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-T-6328
This contract, identified as SPE7M8-26-T-6328, is a solicitation from the Department of Defense Electrical Devices Division for the procurement of one rotary switch, part number 8604636 by Draeger Inc. The item is identified by NSN 5930-01-547-5526 and must comply with military specification MIL-DTL-28786. Delivery is required within 20 days, with a final required delivery date of August 25, 2026, shipped FOB destination to the USS Anchorage LPD 23. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It specifically prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Shipping must be handled via the fastest traceable means, avoiding parcel post, and must follow hazardous materials packaging and shipping guidelines as outlined in IP025.
ELECTRICAL DEVICES DIV

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
GUARD, SWITCH
Solicitation # SPE7M8-26-T-6322
This solicitation, issued by the Department of Defense Electrical Devices Division, is for the procurement of 144 units of switch guards under part number 5930-00-776-6916. The contract requires delivery within 160 days after receipt of order, with the place of performance located in Tracy, California. A critical requirement of this contract is the strict adherence to export control regulations, as the technical data is subject to ITAR and EAR restrictions. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification who have completed the required Department of Defense training and questionnaires. All technical data must be handled in accordance with DFARS 252.225-7048 to prevent unauthorized disclosure to foreign persons.
ELECTRICAL DEVICES DIV

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-24DG
This contract is for the procurement of 10 electrical leads, identified by NSN 6150-01-007-9784 and Fluke Electronics Corp part number 1440-48-0. The solicitation, numbered SPE4A6-26-T-24DG, is issued by the Department of Defense ASC Commodities Division with a required delivery date of August 13, 2026, and a delivery timeframe of 20 days after receipt of order. Shipping is designated as FOB Origin with inspection and acceptance occurring at the destination, specifically Little Rock AFB in Arkansas. The agreement mandates strict adherence to DLA packaging and marking requirements, including ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-6335
This solicitation, issued by the Department of Defense Electrical Devices Division under solicitation number SPE7M8-26-T-6335, is for the procurement of 12 push switches identified by NSN/Part Number 5930-01-304-6671. The contract requires delivery within 121 days after receipt of order, with performance located in Tracy, California. The agreement incorporates several critical regulatory and technical requirements, including DLA packaging standards, the handling of covered defense information, and the removal of government identification from non-accepted supplies. Offerors must adhere to the DLA Master List of Technical and Quality Requirements and are required to provide a complete data package for both approved and alternate parts. Responses are due by September 8, 2026.
ELECTRICAL DEVICES DIV

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE4A6-26-T-23YA
This solicitation from the ASC Commodities Division of the Department of Defense is for the procurement of one electrical power cable assembly, identified by NSN 6150-01-367-5604. The contract requires delivery within 20 days after receipt of order and adheres to DLA packaging requirements. The technical data associated with this item is subject to strict export controls under ITAR or EAR regulations, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Commerce. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-T-6330
This solicitation, issued by the Department of Defense Electrical Devices Division under solicitation number SPE7M8-26-T-6330, is for the procurement of two rotary switches identified by NSN 5930-01-366-6817. The contract requires delivery within 112 days after the order is placed and specifies performance in New Cumberland, Pennsylvania. The agreement incorporates specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract mandates the removal of government identification from any non-accepted supplies and requires alternate offerors to submit a complete data package for both approved and alternate parts.
ELECTRICAL DEVICES DIV

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-6321
This contract, identified as SPE7M8-26-T-6321, is a solicitation for the procurement of one toggle switch, identified by NSN 5930010870317. The requirement specifies parts from Honeywell International Inc (P/N 13AT9-T2) or CAE USA Inc (P/N S251-1). The order is a total small business set-aside under NAICS code 334419, with delivery required within 20 days after receipt of order. The shipment is destined for the Commanding Officer of Fighter Squadron Composite VFC 111 in Key West, Florida, with FOB Origin terms. Packaging must adhere to DLA packaging requirements, MIL-STD-129 for marking and labeling, and ASTM D3951 for non-hazardous materials. The contract mandates the removal of government identification from non-accepted supplies and requires shipping via the fastest traceable means, explicitly prohibiting the use of parcel post.
ELECTRICAL DEVICES DIV

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
INSTALL ASSEMBLY
Solicitation # SPE4A5-26-T-394T
This contract is for the procurement of one Install Assembly, identified by NSN 4920-01-661-7279 and part number 4026AS311-7. The item is classified as a critical application item and must be manufactured according to Technical Data Package Revision A, General 1, based on drawing 30003 4026AS311. Delivery is required within five days after the order, with a required delivery date of August 24, 2026. The shipment is designated as FOB Origin, with both inspection and acceptance occurring at the origin. The agreement incorporates several DLA master list requirements, including specific standards for packaging, measuring and test equipment, and cybersecurity maturity model certification level 2 self-assessment. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The final destination for the shipment is MCAS Futenma in Okinawa, Japan.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M8-26-T-6331
This contract is for the procurement of 12 sensitive switches, identified by NSN 5930014358290 and part number JMP-500 from Columbus Electric Mfg Co. The items are designated as critical application items and must adhere to technical data package Revision A and reference drawing 11476004 Revision B. The order is managed under solicitation SPE7M8-26-T-6331 with a required delivery date of March 27, 2026, and a delivery timeframe of five days after order. The agreement specifies that inspection and acceptance will occur at the origin. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-28786, with specific requirements for the removal of government identification from non-accepted supplies. The shipment is destined for the Royal Saudi Air Defense Forces in Jeddah, Saudi Arabia, via New York Forwarding Service Inc.
ELECTRICAL DEVICES DIV

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SWITCH ASSEMBLY
Solicitation # SPE7M8-26-T-6326
This solicitation, issued by the Department of Defense Electrical Devices Division, is for the procurement of two switch assemblies under NSN 5930-00-548-7423. The contract requires delivery within five days after receipt of order and adheres to specific DLA packaging and quality requirements. The response deadline for this solicitation is September 8, 2026. The contract strictly prohibits the use of Class I ozone-depleting substances during the design, manufacturing, or testing processes unless written approval is granted by the contracting officer. Additionally, any alternate offerors must provide a complete data package for both approved and alternate parts. All technical and quality requirements are governed by the DLA Master List based on the solicitation or award date.
ELECTRICAL DEVICES DIV

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A0-26-T-4511
This contract is for the procurement of one wiring harness, identified by NSN 5995015778569 and HDT Expeditionary Systems Inc part number 178K0102-1. The order is managed under solicitation number SPE4A0-26-T-4511 for the Department of Defense Aviation Supply Chain. Delivery is required within five days after the order is placed, with the shipment designated as FOB Origin and the final destination located at Prince Sultan Air Base in Saudi Arabia. The supplier must adhere to strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, as well as DLA packaging requirements specified in RP001. Inspection and acceptance will take place at the destination. The contract also incorporates specific technical and quality requirements via the DLA master list and mandates the removal of government identification from any non-accepted supplies.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
Solicitation # SPE7L4-26-T-6629
This solicitation, issued by the Department of Defense under the LSO Combat Vehicles and Armament agency, is for the procurement of 11 wiring harnesses, identified by NSN/Part Number 6150-01-422-7736. The contract requires delivery within 251 days after receipt of the order. Performance is centered in Anniston, Alabama, and the solicitation is categorized under NAICS code 334419. The contract mandates strict adherence to several regulatory and quality standards, including CMMC Level 2 certification and DLA packaging requirements. It emphasizes rigorous quality control through configuration change management and the use of Qualified Products Lists or Qualified Manufacturers Lists. Additionally, the project is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed training to handle sensitive technical data.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 336412
New
DIBBS
Supplier of Aircraft Safety Belts (NSN 1680012772876, P/N FDC-6400-145)This subcontract through the Department of Defense ASC Commodities Division requires the supply of aircraft safety belts, identified by part number FDC-6400-145 and NSN 1680012772876. The order quantity ranges from 95 to 566 units, which are classified as critical application items. The supplier must ensure all units are compliant with MIL-STD-130N marking standards and meet CMMC Level 2 cybersecurity requirements. Interested parties must submit their responses by September 7, 2026, under NAICS code 336412.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BOLT, INTERNAL WRENC
Solicitation # SPE4A6-26-T-24EE
This contract is for the procurement of 200 internal wrenching bolts, identified as NSN 5306002065812 and part number MS20006-24. The items are classified as commercial critical application hardware and must be manufactured according to the current revision of the applicable part standards, specifically NASM20004 through NASM20024. Delivery is required within 5 days after the order, with the shipping destination being the Poland FMS Consolidation point in Huntsville, Alabama. The agreement mandates strict quality and technical compliance, including ISO 9001:2015 standards for manufacturers and CMMC Level 2 self-assessment for cybersecurity. Sampling and inspection will be conducted at the origin following MIL-STD-1916 or ASQ H1331, with specific gauging requirements for Class 3A and 3B threads. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements to ensure proper transport and identification.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-26-T-19CP
This solicitation is for the procurement of 683 turnlock fastener studs under solicitation number SPE4A6-26-T-19CP for the Department of Defense ASC Commodities Division. The items are identified as commercial products with a delivery requirement of 171 days after the order is placed. Performance is designated for Robins Air Force Base, and the contract falls under NAICS code 332510. The contract mandates strict adherence to DLA packaging requirements and technical quality standards, including specific guidelines for physical item marking and the removal of government identification from non-accepted supplies. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance unless otherwise specified.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SL
Solicitation # SPE4A6-26-T-23UX
This contract is for the procurement of nine slotted hexagon self-locking nuts, identified by NSN 5310-00-047-2394 and part number MS21225-6. The items are classified as critical application items and must adhere to technical specifications including NASM21225 Revision 3 and MIL-DTL-32258. Delivery is required within 20 days, with the original required delivery date set for April 23, 2026. The shipment is to be handled via a freight forwarder in Jacksonville, Florida, for final delivery to the Commanding Officer at the RSNF Naval Supply Center in Jubail, Saudi Arabia. Quality and compliance are governed by DLA master lists, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, while palletization must follow DLA packaging requirements. The contract specifies a zero percent quantity variance and establishes the inspection and acceptance points at the point of origin.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-23UY
This contract is for the procurement of machine screws, specifically part number NAS517-3-18 under NSN 5305-00-515-7460. The order consists of four units with a delivery requirement of 20 days. The items are designated as critical application items and must adhere to technical data package specifications, including NAS517 Revision 8 and associated quality assurance provisions. Quality and inspection are managed at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows DLA packaging requirements. The shipment is destined for the Fuerza Aerea de Chile in Santiago, Chile, via the CEVA Air and Ocean USA freight forwarder in Miami, Florida.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24AG
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-24AG, is for the procurement of 20 machine screws identified by NSN 5305-01-463-4131. The item is classified as a Commercial Off The Shelf product and must be delivered within 20 days after the order is received. The contract requires adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. Additionally, the supplier must ensure the removal of government identification from any non-accepted supplies. Responses to this solicitation are due by September 4, 2026, and the primary point of contact for this acquisition is Lisa Harvie.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-23YQ
This contract is for the procurement of one special purpose electrical cable assembly, identified by NSN 5995017077985 and HII Unmanned Systems Inc part number 153176. The item is designated as a critical application item, and the government has specified that surplus materials are not acceptable. Delivery is required within 20 days of order, with shipping handled FOB Origin and inspection and acceptance occurring at the destination in Virginia Beach, VA. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-based sampling approach for acceptance. Additionally, the contractor must comply with covered defense information regulations and specific requirements for the removal of government identification from non-accepted supplies.
Current-Carrying Wiring Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-24EB
This contract is for the procurement of one special purpose electrical cable assembly, identified by NSN 5995016290046. The item is associated with General Dynamics Information 58672 P/N 100349201-1 and Electric Boat Corporation 96169 P/N 218081352. Delivery is required within 106 days, with a need ship date of December 20, 2026, and an original required delivery date of April 5, 2027. The shipment is destined for the DLA Distribution New Cumberland facility in Pennsylvania, with FOB origin terms and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. A critical environmental restriction is in place prohibiting the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where functionally required by specific NAVSEA standards.
Other Building Material Dealers

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-23UZ
This contract is for the procurement of 379 machine screws under solicitation number SPE4A6-26-T-23UZ, identified by NSN 5305010945716. The items are designated as critical application items and are associated with part number SS5012-4-45 from approved sources including Sikorsky Aircraft Corporation, Hartford Aircraft Products, and Rotair Aerospace Corp. Delivery is required within 171 days, with a need ship date of February 23, 2027, and an original required delivery date of June 3, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination. The contract specifies a zero percent quantity variance and mandates adherence to the DLA Master List of Technical and Quality Requirements.
Nonferrous Forging

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-23ZU
This contract is a solicitation from the Department of Defense, specifically the ASC Commodities Division, for the procurement of one plain hexagon nut under NSN 5310-01-692-1534. The delivery requirement is set for 20 days after order. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for packaging and the removal of government identification from non-accepted supplies. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access technical data.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24CT
This contract is for the procurement of machine screws under solicitation SPE4A6-26-T-24CT, with a total quantity of 50 packages, each containing 100 pieces. The items are identified by NSN 5305-00-901-3782 and must adhere to specific technical standards, including NASM27039 Revision 6 and NASM7839 Revision 2. As a critical application item, the screws must meet strict gauging requirements for Class 3A and 3B threads per FED-STD-H28/20 and comply with MIL-STD-130N for physical identification and marking. Delivery is required within 20 days, with the original required delivery date set for May 21, 2025. The contract specifies FOB Origin for both inspection and acceptance. Packaging and palletization must follow MIL-STD-2073-1E and DLA packaging requirements, with final shipment directed to the RTN Air Wing in Thailand via the designated freight forwarder, FMS Logistics LLC. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and a Certificate of Quality Compliance is required.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-24AA
This contract is for the procurement of 246 retaining rings under solicitation SPE4A6-26-T-24AA for the Department of Defense. The items are identified by NSN 5325-00-205-4727 and must adhere to technical drawings 19207 7709323. Delivery is required within 75 days, with a need date of November 19, 2026, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The procurement is designated as a Critical Application Item and requires Tailored Higher Level Quality requirements, including source inspection. Quality assurance follows specific sampling methods such as MIL-STD-1916 or ASQ H1331, and packaging must comply with MIL-STD-2073-1E and RP001. While certificate of conformance procedures are authorized, Item Unique Identification is not required for this specific order.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details