Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CABLE ASSEMBLY, SPECIAL

Active
SPE4A6-26-T-02SWFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a special-purpose electrical cable assembly under solicitation SPE4A6-26-T-02SW, with a quantity of 11 units and a unit price of $11.00, totaling $121.00. The item is identified by NSN 6150-00-148-3908 and part numbers 14-55904-7 and 877021, and delivery is required in 412 days to the DLA Distribution Jacksonville facility, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must strictly follow MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. The packaging and palletization adhere to DLA’s standardized requirements, and the item must be delivered by August 30, 2027. The contract incorporates technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality provisions applicable to both manufacturers and non-manufacturers, and mandates the removal of government identification from non-accepted supplies. Sampling procedures must comply with MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified, with attributes assigned verification levels or AQLs based on their criticality. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and the item falls under Covered Defense Information provisions. The contract is tied to a Federal acquisition under a small business set-aside, with the Northrop Grumman Systems Corporation and Kiddie Technologies, Inc. identified as potential suppliers, and all logistics details including the freight shipping address and point of contact are provided for coordination.

General Info

11 units of NSN 6150-00-148-3908 cable assembly requested by DLA, due July 13, 2026

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

BLDG 175 SWAN ROAD, JACKSONVILLE, FL, 32212-0103, US

Set-Aside

SBA

Documents

(1)

RFQ SPE4A6-26-T-02SW DLA Aviation Jul 06 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
VICTORIA BURCHAM
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICA
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
NORTHROP GRUMMAN SYSTEMS CORPORATION 79U29 P/N 14-55904-7
KIDDE TECHNOLOGIES, INC 61423 P/N 877021
SPE4A6-26-T-02SW
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017385524 0001 EA 11.000
NSN/MATERIAL:6150001483908
DELIVERY (IN DAYS):0412
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:EC INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
JACKSONVILLE FL 32212-0103
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
RAYMOND MORGAN 904-661-5135
JACKSONVILLE FL 32212-0103
US
Need Ship Date:08/30/2027
SPE4A6-26-T-02SW
SECTION B
PR: 7017385524 PRLI: 0001 CONT’D
Original Required Delivery Date:08/30/2027
SPE4A6-26-T-02SW NSN/Part Number: 6150-00-148-3908 Quantity: 11 EA Purchase Request: 7017385524QTY: 11 Delivery: 412 days ADO

Similar Contracts

NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHEThis contract specifies the procurement of a branched wiring harness with part number 135399 and NSN 6150014836527, supplied by Cadillac Gage Textron Inc. CAGE code 10237, under solicitation SPE7L0-26-T-0368. Two units are required at a fixed quantity with zero variance, to be delivered within five days of order placement, FOB origin, and inspected and accepted at destination. The item is designated as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, and attributes must be verified at levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling directives, with palletization aligned to DLA packaging requirements. The shipment must be sent via the fastest traceable means excluding parcel post to the designated DLA depot in Texarkana, TX. The delivery is required by July 10, 2026, with contract performance governed by applicable defense acquisition regulations and configuration change management protocols requiring formal engineering change proposals or variance requests for any modifications.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, POWEThis contract solicits the procurement of eight units of a power cable assembly identified by NSN 6150-01-351-3351, with a delivery deadline of 87 days after award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined based on the solicitation issue date or award date depending on the acquisition scale. The item is subject to defense data controls under RD002 and must comply with DLA packaging standards, tailored quality requirements for manufacturers and non-manufacturers, and inspection acceptance procedures at the origin. Government identification must be removed from any non-accepted supplies. The technical data associated with this item is classified under export control regulations, either ITAR or EAR, making unauthorized disclosure or export—including to foreign nationals in the U.S.—a violation. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and received DLA approval. The solicitation, issued under number SPE4A6-26-T-05NQ, was posted on July 13, 2026, with responses due by July 21, 2026, and is managed by the Department of Defense's ASC Commodities Division, with performance required at Texarkana, Texas, 75507-5000. Point of contact for inquiries is Traci Beaudoin at traci.beaudoin@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECThis contract is for a single cable assembly with NSN 6150016254392 and part number MK4654204-04, supplied by General Dynamics Land Systems Inc, to be delivered FOB destination within five days of award, with no variance allowed in quantity. The item must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking required. The delivery destination is USS SAN DIEGO LPD 22, FPO AP 96678-1704, and shipment is classified as a vessel delivery under DLAD PROC NOTE C19 and C20. Inspection and acceptance occur at the destination. Sampling for quality verification must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels or AQLs as specified; unspecified attributes are treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916, and while MIL-STD-105/ASQ Z1.4 may determine sample size, acceptance requires zero non-conformances unless otherwise contracted. Technical and quality requirements are incorporated by reference from the DLA Master List. The contract mandates a CMMC Level 2 self-assessment and requires physical identification of the bare item. The unit of issue is each, and the purchase request number is 7017418793. The item is subject to DLA packaging and defense information controls, and government identification must be removed from non-accepted supplies. The solicitation was issued under SPE4A0-26-T-3868 with a response deadline of July 21, 2026, and is managed by the Department of Defense’s Aviation Supply Chain ESOC Buys.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
BRACKET, PIPE, SECTThe item is a bracket for pipe section with NSN 5342-01-314-3610 and a quantity of 142 units, solicited under contract number SPE4A7-26-T-567K with a response deadline of July 21, 2026, and a delivery requirement of 73 days after order. Technical data associated with this item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and applying equally to foreign nationals employed by U.S. companies or their subsidiaries. Access to this controlled data is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required training on handling DOD export-controlled technical data, and have been formally approved by the DLA authority. DFARS 252.225-7048 governs the handling and protection of this data. The solicitation is issued by the Department of Defense under agency name ASC SUPPLIER OPER AE AND AF DIV, with performance located in Tracy, California, 95304-5000, and point of contact is Tamera Greene at tamera.greene@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
ELECTRON TUBEThis contract solicitation is for the procurement of 34 electron tubes identified by NSN 5960-01-467-0961 under a Small Business Set-Aside, with a response deadline of July 24, 2026 and a delivery requirement of 345 days after award. The item is designated as a restricted source requiring engineering source approval from the government design control activity. The solicitation incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issuance or award date. Compliance with CMMC Level 2 Cybersecurity Self-Assessment is mandatory, and the contract is subject to requirements covering defense information. Configuration changes necessitate an Engineering Change Proposal with formal variance or waiver requests, and any non-accepted supplies must have government identification removed. Offerors must submit comprehensive documentation per MIL-T-31000 including all manufacturing drawings, detailed process and inspection sheets, identification of critical process suppliers, purchase order copies, and a shock extension report compliant with MIL-S-901 and DI-ENVR-80706. If original OEM drawings are unavailable, an engineering analysis detailing development methodology is required, including full documentation of any reverse engineering procedures such as sample counts, measurement techniques, data compilation, and justifications for dimensional tolerances and acceptance criteria. All submitted data will be reviewed by the government’s engineering support activity. The solicitation is managed by the Department of Defense’s Active Devices Division with primary point of contact Thomas Mitchell.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details