Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Cable Copper

Active
Z4876State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of stranded compressed copper conductor cable with a 5 mil helically applied copper tape and a minimum 70 mils point polyvinyl chloride jacket, manufactured in compliance with the latest edition of NES Specification EC-562. Three separate lengths of 2,300 circuit feet each must be provided, twisted on individual reels to meet the total length requirement. All reels must be constructed of steel with an arbor hole of at least 5.25 inches inside diameter and must not exceed 50 inches in width or 84 inches in height. The maximum cable diameter is capped at 0.94 inches, and each reel must be clearly stamped with the tare weight, net weight, and gross weight. The cable must be shipped on open flatbed trucks unless prior written approval is obtained for alternative transportation. Approved manufacturers for this specification include KERITE, PRYSMIAN, and OKONITE, with the part number KERITE302C15-A4420 explicitly listed. The solicitation, titled Cable Copper under number Z4876, is issued by Nashville Electric Service in Tennessee with a response deadline of August 5, 2026 at 7:00 PM. The point of contact for procurement inquiries is Jay Thompson, reachable via email at jethompson@nespower.com. The contract is targeted for performance in Nashville, Tennessee, and is accessible through the agency’s vendor portal at the provided UI link.

General Info

Procure three 2,300-ft stranded copper cables with PVC jacket, steel reels, NES EC-562 compliance, shipped on flatbeds.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

335929 - Other Communication and Energy Wire ManufacturingView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(1)

Z4876_RFB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, US
Organization / Agency
Tennessee → Nashville Electric Service
View Agency Profile
Office AddressNashville, TN, US
Contacts
Jay ThompsonProcurement Contact
contact@example.gov

Full Description

Show more
STRAND COMPRESSED COPPER CONDUCTOR, 5 MIL HELICALLY APPLIED COPPER TAPE, AND 70 MILS MIN POINT POLYVINYL CHLORIDE (PVC) JACKET. IN ACCORDANCE WITH LATEST EDITION OF NES SPECIFICATION EC-562. PROVIDE 3 - 2,300 FOOT LENGTHS OF SINGLE CONDUCTOR CABLE TWISTED ON EACH REEL EQUAL TO 2,300 CIRCUIT FEET. THIS CABLE SHOULD BE SHIPPED ON OPEN FLATBED TRUCKS UNLESS OTHERWISE APPROVED PRIOR TO SHIPMENT. THE FOLLOWING INFORMATION MUST BE STAMPED ONTO THE REELS: "TARE WEIGHT: ####" "NET WEIGHT: #####" "GROSS WEIGHT: #####" ALL REELS MUST BE STEEL AND HAVE AN ARBOR HOLE MINIMUM INSIDE DIAMETER OF 5.25". REEL SIZE SHALL NOT EXCEED 50" WIDE BY 84" HIGH. MAXIMUM DIAMETER OF CABLE SHALL NOT EXCEED 0.94". Approved Manufacturers and/or Part Numbers: KERITE302C15-A4420 PRYSMIAN. OKONITE.

Similar Contracts

Same NAICS industry code

NAICS: 335929
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAThe contract is for the procurement of 35 units of a special-purpose electrical cable assembly, identified by NSN 6150-01-622-0955 and manufacturer part number A13089-R-042 from Thales Defense & Security Inc, with a contract number SPE4A6-26-R-XB63. The delivery schedule requires full quantity to be delivered within 280 days after receipt of order, with F.O.B. Origin terms placing responsibility and risk of loss on the government upon shipment from the contractor’s facility. Inspection and acceptance occur at origin, governed by MIL-STD-1916 or ASQ H1331 sampling methods, with verification levels of VII for critical, IV for major, and II for minor attributes, and zero non-conformances required in sample lots unless otherwise specified. Pricing is firm fixed price, with a maximum contract ceiling of $350,000 under an indefinite delivery purchase order structure that guarantees a minimum of 10 units annually over a five-year base period. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements RP001, including clean and dry preservation, no specific preservation material, and unit containers marked per MIL-STD-129 with standard barcoding, contract number, lot identification, and no special marking. The item is designated as a critical application item and subject to Covered Defense Information requirements under DFARS 252.204-7012 and DFARS 252.225-7048, which mandate safeguarding and cyber incident reporting. The supplier must meet CMMC Level 2 self-assessment requirements and is subject to restrictions under the Federal Acquisition Supply Chain Security Act, prohibitions on Chinese and Kaspersky-related hardware, and Xinjiang-sourced materials. The contract includes compliance with FAR and DFARS clauses concerning small business representation, whistleblower protections, prompt payment, electronic funds transfer, assignment of claims, and prohibited subcontractors. Quality assurance provisions are tied to the DLA Master List of Technical and Quality Requirements, and the contractor must adhere to DPAS priority ratings. Unique Entity ID and CAGE code are required for compliance, but item unique identification is waived per customer request. The solicitation evaluates proposals based on past performance, primarily through SPRS assessments, followed by cost and delivery, using a trade-off approach rather than LPTA.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335929
New
DIBBS
CABLE ASSEMBLY, SPECThe contract solicitation SPE4A6-26-T-07ZY is for the procurement of five units of a cable assembly classified under NSN 6150-01-573-9388, with a unit of issue as each (EA) and a total estimated value derived from a unit price not clearly defined in the documentation. Delivery is required within 19 days of order receipt, with FOB origin terms and final delivery to the DLA Distribution New Cumberland Facility in Pennsylvania. The item is designated a critical application item and must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including 2D Data Matrix barcoding, with no special marking required. Packaging must adhere to RP001 DLA Packaging Requirements and utilize an E5 fiberboard box as the unit and intermediate container, with cleaning and drying as the sole preservation method and no additional preservation or cushioning materials. The contractor must complete a CMMC Level 2 self-assessment and comply with DFARS 252.204-7012 for safeguarding covered defense information, while also implementing NIST SP 800-171 controls under deviation 2026-O0025. Technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, and supply rejection requires removal of all government identification. The contract incorporates clauses addressing combating trafficking in persons, employment eligibility verification, sustainable products, hazardous material safety, cybersecurity, whistleblower rights, and subcontracting for commercial products, with FAR 52.216-1 indicating a simplified acquisition structure. Invoicing must be submitted electronically via WAWF, and the contractor must maintain current SAM registration. Inspection and acceptance occur at the destination point under government authority, with no allowance for quantity variance. The solicitation closes on July 31, 2026, and responses must be submitted through the DIBBS portal, with no formal section C or evaluation factors disclosed in the available documentation, indicating the award will be based on compliance with technical, packaging, and cybersecurity requirements under a simplified acquisition process.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335929
New
SLED
AWG 19 Strand Aluminum ConductorThe contract specifies the procurement of a specialized cable with a 19-strand aluminum conductor, 11 number 14 AWG round copper concentrics in a one-third configuration, and a minimum 45 mils point polyethylene jacket featuring red stripes, all manufactured in compliance with the latest edition of the NES EC-276 specification. Each cable unit must be supplied in three 1,000-foot lengths per reel, totaling 1,000 circuit feet per reel, with all reels required to be shipped on open flatbed trucks unless prior written approval is obtained for alternative transportation. The reels must be clearly stamped with the tare weight, net weight, and gross weight, and must include a metal center hub collar with an inside diameter of at least 2.75 inches, while overall reel dimensions cannot exceed 43 inches in width or 72 inches in height, and the maximum cable diameter must not surpass 1.47 inches. Only approved manufacturers—Prysmian, Kerite, and Okonite—are eligible to supply this cable. This solicitation is issued by Nashville Electric Service under solicitation number Z4870, with a response deadline of August 10, 2026, at 7:00 PM Eastern Time. The procurement is categorized under a state and local government entity in Tennessee, and the performance location is Nashville. Potential vendors must submit bids through the official portal linked in the solicitation data, and all inquiries should be directed to Jay Thompson, the primary procurement contact, via email at jethompson@nespower.com. The contract is open for bidding without specific set-aside classifications, and compliance with all technical, labeling, and shipping requirements is mandatory for proposal acceptance.
Nashville Electric Service

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335929
New
SLED
Cable AluminumThe contract specifies a custom-built stranded compressed aluminum conductor cable with sixteen #12 AWG round copper concentrics and a minimum 70 mils point polyethylene jacket marked with red stripes, manufactured to meet the latest edition of NES Specification EC-276. A single 1,500-foot length of this cable is required, and it must be shipped on open flatbed trucks unless prior written approval is obtained for alternative shipping methods. Each reel must be clearly stamped with the tare weight, net weight, and gross weight, and must include a metal center hub collar with a minimum inside diameter of 2.75 inches. The reel dimensions are strictly limited to no more than 43 inches wide by 72 inches high, and the maximum cable diameter cannot exceed 1.89 inches. Only approved manufacturers—Prysmian, Kerite, and Okonite—are permitted to supply this cable. The solicitation is issued by Nashville Electric Service under reference number Z4868, with bids due by August 5, 2026, and the point of contact for procurement inquiries is Jay Thompson at jethompson@nespower.com.
Nashville Electric Service

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335929
New
SLED
Cable CopperThe cable is a stranded compact copper conductor with a 5 mil helically applied copper tape shield and a minimum 70 mil point thickness polyvinyl chloride jacket, manufactured to meet the latest edition of NES Specification EC-562. Each order consists of three 1,000-foot lengths of single conductor cable, paralleled on individual reels to total 3,000 circuit feet. The cable must not exceed a nominal diameter of 1.60 inches and must be shipped on open flatbed trucks unless prior approval is obtained for alternative transport. All reels must be steel with an arbor hole of at least 5.25 inches inside diameter and must not exceed 50 inches in width or 96 inches in height. Each reel must be clearly stamped with the tare weight, net weight, and gross weight. Only approved manufacturers—Prysmian, Kerite, and Okonite—are permitted to supply this cable. The solicitation, issued by Nashville Electric Service in Tennessee, has a response deadline of August 10, 2026, and is accessible through the vendor portal linked in the contract data.
Nashville Electric Service

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335929
New
DIBBS
Special Purpose Electrical Cable Assembly ManufacturingThe contract is for the full lifecycle production of special purpose electrical cable assemblies, encompassing design validation, material sourcing, assembly, testing, packaging, and timely delivery. The work must be performed in alignment with rigorous quality and performance standards, ensuring the assemblies meet exacting specifications for specialized applications. All processes, from initial engineering review to final certification, are expected to adhere to industry best practices and applicable regulatory requirements. This is a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by the North American Industry Classification System code 335929, which covers other electrical equipment and component manufacturing. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026. The contracting activity falls under the ASC Commodities Division of the Department of Defense, and while the specific place of performance is not detailed, the work is anticipated to support national defense requirements. All interested parties must respond through the designated DIBBS portal prior to the deadline to be considered for award.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 335929
New
DIBBS
Special Purpose Electrical Cable Assembly ManufacturingThe contract is for the manufacture of 160 units per year of a military-spec electrical cable assembly identified by NSN 6150-01-645-7609, with a potential total volume of up to 800 units over a five-year period, intended for critical defense applications. The work falls under NAICS code 335929 and is classified as a subcontract, issued by the ASC Commodities Division within the Department of Defense. Performance is expected to meet rigorous military standards to ensure reliability in high-stakes environments, and the solicitation is open for responses until August 7, 2026. The contract does not specify a set-aside designation, and while location details are not provided, the delivery and performance are aligned with DoD operational requirements.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 335929
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAThe contract is an Indefinite Delivery Purchase Order (IDPO) under solicitation number SPE4A6-26-R-XB83, issued by the Department of Defense’s ASC Commodities Division, for the procurement of 160 units of a special-purpose electrical cable assembly identified by NSN 6150-01-645-7609. The contract has a five-year base period with a total ceiling value of $350,000 and imposes a minimum order quantity of 40 units per delivery order and a maximum of 160 units per order. Pricing is fixed at firm fixed price with zero variance allowed in quantity fulfillment. Delivery is required within 93 days of order placement, under FOB Origin terms, meaning the contractor assumes all transportation costs and risks from the point of shipment to various CONUS stock locations as directed by individual delivery orders. Inspection and acceptance both occur at the destination point, with the government responsible for verifying compliance via sampling methods per MIL-STD-1916 or comparable zero-based plans, requiring zero non-conformances unless otherwise specified. Critical, major, and minor attributes must be verified using specified verification levels or AQLs, and unspecified attributes are treated as major. The cable assembly is classified as a critical application item with bare item marking required per RQ017, and all shipments must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, including GS1-128 or Code 128 barcoding on all containers. Palletization must conform to DLA’s RP001 packaging requirements. The contractor must maintain an inspection and quality system acceptable to the government, with documentation available upon request. All proposals must be submitted electronically via DIBBS or email to the designated point of contact, with a 15 MB file limit per email. The contract incorporates numerous FAR clauses including termination for convenience, default, equal opportunity, child labor compliance, cybersecurity safeguarding, and radioactive material notification, and applies deviation 2026-O0038 to several provisions. Past performance, particularly as reflected in SPRS assessments, carries the most weight in award decisions, with a trade-off approach used rather than LPTA. Invoicing must be processed through WAWF, and the contractor must provide unique entity identifiers and confirm small business status if applicable, with full compliance required for socioeconomic representations and cybersecurity reporting
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 335929
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAThis contract specifies the procurement of 40 units of a special purpose electrical cable assembly identified by NSN 5995-01-693-3578, with a delivery deadline of 578 days after contract award. The solicitation is a total small business set-aside under FAR 19.5 and is issued by the Department of Defense’s ASC Commodities Division. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0. All items must be marked with physical identification per RQ017, and government identification must be removed from non-accepted supplies. The manufacturer must maintain ISO 9001:2015 quality management certification and comply with inspection and acceptance procedures at origin. Data associated with this item is restricted under Kongsberg Defence & Aerospace AS License Agreement 34, requiring strict non-disclosure and destruction protocols, and access to the technical data package requires completion of mandatory forms via the DLA TDMT portal. Technical data is subject to export-control regulations under ITAR or EAR, prohibiting disclosure to foreign persons without authorization, and contractors must hold a valid US/Canada Joint Certification Program certification, complete DOD export control training, and obtain DLA approval to handle such data. Cybersecurity compliance at CMMC Level 2 is required for third-party assessors, and covered defense information is subject to applicable DFARS clauses including 252.225-7048.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 335929
New
DIBBS
CABLE, RADIO FREQUENCYThis contract specifies the procurement of radio frequency cable under solicitation SPE7M1-26-U-4846, with a total estimated quantity of 1,001 linear feet to be delivered in continuous lengths per packaging requirements. The cable shall comply with MIL-DTL-12000 for preservation and packaging, and all packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, including special preservation codes and unit pack configurations as dictated by the advice code on the shipping label. Packaging must be palletized in accordance with DLA requirements, and multiple unit packs are only acceptable if the advice code is 2P or 39; otherwise, continuous length is mandatory. The material is designated as a critical application item, with specific part numbers tied to approved suppliers, and the contract is set aside entirely for small businesses. Delivery is FOB origin with an 80-day lead time, and acceptance is at the destination point with a 5% variance allowance on quantity. Inspection and acceptance are post-delivery, and the contract incorporates technical and quality requirements from the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size. Configuration changes, deviations, or waivers must be processed via formal engineering change proposals, and government identification must be removed from non-accepted supplies. The unit of issue is feet, and the NSN is 6145-00-253-2615.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 335929
New
DIBBS
CABLE, RADIO FREQUENThe solicitation seeks the procurement of 5,966 feet of radio frequency cable, identified by NSN 6145-01-612-8905, manufactured by Times Microwave Systems, Inc., part number LMR-400-FR, delivered in 500-foot continuous spools. Deliveries are required within 101 days after receipt of order, with FOB Origin terms governing shipment, as specified under the First Destination Transportation program, despite conflicting references to FOB Destination. The contract is issued under DLA’s Master Solicitation for Automated Simplified Acquisitions Revision 105, and the acquisition falls under NAICS code 335929. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced under RA001, with packaging and preservation strictly conforming to MIL-STD-2073-1E and MIL-DTL-12000 for cable, cord, and wire, including specific preservation methods denoted by code ZZ and unit container configurations. Marking and labeling must adhere to MIL-STD-129 with special marking code ZZ, and hazardous materials require compliance with OSHA’s Hazard Communication Standard. Contractors must comply with numerous Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses including Safeguarding Covered Defense Information and Cyber Incident Reporting, Prohibition on Covered Defense Telecommunications Equipment, NIST SP 800-171 DOD Assessment Requirements, and Buy American Act provisions applicable above the micro-purchase threshold. All quotes must be submitted electronically via DIBBS by July 27, 2026, and failure to provide a Safety Data Sheet prior to award results in nonresponsibility. Alternate offerors are required to submit complete data packages for both approved and alternate parts. Payment must be processed through WAWF, and vendors must register in DLA’s AMPS system to access the Vendor Shipment Module. The solicitation includes requirements for whistleblower protections, disclosure of information, limitations on arbitration agreements, and prohibitions on hexavalent chromium and Communist Chinese military company sources. HUBZone price evaluation preferences apply unless waived, and offerors must submit socio-economic representations including small business status, women-owned and veteran-owned certifications where applicable. The quantity allowed varies plus or minus 5 percent, and the contract is for firm-fixed-price delivery under a simplified acquisition format.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 335929
New
Federal
Copper Cable and Accessories for South Carolina (PSTE)This procurement is a presolicitation notice for a Total Small Business Set-Aside under FAR 19.5, targeting qualified small business sources to supply a bundled kit of copper communication cables and accessories for delivery to Eastover, South Carolina. The requirement is structured around commercial items acquired under FAR 12.201-1(c)(2), with brand-name or equal products mandated for all components listed in the attachments, including 2-pin connector cables, LCD monitors with part number VG-110-30-C, and headphone jacks from Audio-Technica or JBL. The award will be determined through a trade-off approach considering price and other factors, primarily delivery date, with technical capability and past performance also evaluated, making it distinct from a Lowest Price Technically Acceptable process. The anticipated award date is September 2, 2026, with responses due by August 10, 2026, and the government will inspect and accept the completed kit at the specified shipping address. No formal contract clauses, packaging or marking requirements, inspection standards beyond brand-name compliance, or payment and invoicing details are provided in this presolicitation, as these will be detailed in the subsequent solicitation. The contracting office is located at OTIS ANGB, Massachusetts, but the performance and delivery point is clearly defined as Building 258 at 1325 S Carolina Road, Eastover, South Carolina, with point of contact information provided for inquiries regarding the procurement.
W7NE Uspfo Activity Maang 102

POSTED

2 days ago

DEADLINE

in 12 days
View Details

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 335999
New
SLED
Fuse NX SandThe contract is for the procurement of Fuse NX Sand, a 10-ampere continuous, C-rated, full-range cannister mount fuse rated for 15.5 kilovolts with a 50,000 symmetrical ampere interrupting capacity. Approved manufacturers and part numbers include ABBAUTO151D883G11, COOPERFA4H10CODE5, and GENELEC9F59KBD010, ensuring compliance with specified technical requirements. The solicitation is issued by Nashville Electric Service under solicitation number Z4878, targeting state, local, and educational agencies. Responses are due by July 31, 2026, at 7:00 PM Eastern Time, with the solicitation posted on July 28, 2026. The place of performance is Nashville, Tennessee, and all deliveries must meet agency specifications for reliability and safety in utility applications. Primary point of contact for procurement inquiries is Bailey Allen, who can be reached at ballen1@nespower.com or by phone at 615-747-3724. The solicitation is accessible online via the vendor portal at https://vendor.nespower.com/?bid=Z4878. Interested vendors must submit bids in accordance with the posted deadline and technical criteria, as failure to comply with approved manufacturer part numbers or performance ratings may result in disqualification. No set-aside provisions are specified, and the contract is not restricted to small business or socioeconomic categories.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
SLED
Relay Basler Retrofit KitThe contract is for a Basler Retrofit Kit designed to replace existing ABB CO time overcurrent relays with a single-phase, case-less relay that fits inside the original ABB CO relay housing. The approved part number for this retrofit solution is BASLERBE1-50/51B-219, ensuring compatibility with legacy ABB equipment without requiring a full housing replacement. The upgrade aims to modernize protected systems while maintaining structural and spatial integrity within existing installations. The solicitation, numbered Z4877, was posted by Nashville Electric Service in Tennessee with a response deadline of July 31, 2026. It is categorized as a SLED procurement and includes a primary point of contact, Bailey Allen, reachable via email and phone for inquiries. The place of performance is in Nashville, Tennessee, and interested parties can access more information through the provided vendor portal link. No set-aside type or NAICS code is specified, indicating an open competition for qualified suppliers.
Relay and Industrial Control Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
SLED
Meter SealThe contract is for the procurement of SEAL PLASTIC ORANGE METER SEALS featuring an acrylic body with an orange insert, a regular padlock design, and a stainless steel hasp, each marked with NES. The seals are to be supplied loosely packed in boxes of 100 units. Approved manufacturers and part numbers include STARPOLYSPUNI2, INNER-TC-2070, and BROOKSM6085604-27. The solicitation is issued by Nashville Electric Service under solicitation number Z4871, with a response deadline of August 3, 2026 at 7:00 PM. The contract is classified under a SLED government type and does not specify a set-aside type or NAICS code. The place of performance and the agency's location are both in Nashville, Tennessee. All inquiries and submissions must be directed to Alan Martinez, the primary procurement contact, via email at amartinez@nespower.com or by phone at 615-747-3720. Further details and submission requirements can be accessed through the vendor portal at the provided UI link.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 423130
New
SLED
Tire CleanerNashville Electric Service is soliciting tire cleaner under solicitation number Z4873, with a response deadline of August 3, 2026, at 7:00 PM Eastern Time. The product required is a 32 fluid ounce trigger spray bottle of Westleys Bleche-Wite White Wall/Blackwall Tire Cleaner, and only approved manufacturers and part numbers CMLTIRE19-100, WESTLEYS555, TRW640651, and NAPA800002224 are acceptable. The solicitation is classified under a State, Local, and Educational (SLED) organization type, and performance is required in Nashville, Tennessee. The procurement contact is Alan Martinez, who can be reached at 615-747-3720 or amartinez@nespower.com for inquiries. The contract portal for submissions and further details is accessible through the vendor portal at the provided web link.
Tire and Tube Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 424120
New
SLED
Paper TowelsThe contract calls for the supply of 2 ply paper towel rolls with a minimum sheet size of 11 inches by 8.75 inches and a minimum of 85 sheets per roll, packaged in cartons of 30 rolls each. Only products from approved manufacturers, specifically Georgia Pacific part number 27385 and Boardwalk part number 6272, are eligible for submission. The solicitation, identified by number Z4875, is issued by the Nashville Electric Service under the Tennessee state agency and is categorized as a SLED procurement. Proposals must be submitted by August 4, 2026, at 7:00 PM Eastern Time, with the solicitation posted on July 28, 2026. All deliveries are to be performed in Nashville, Tennessee, and inquiries can be directed to Procurement Contact Shanna Faulk via email at sfaulk@nespower.com or phone at 615-747-3578, with additional details available through the vendor portal link provided.
Stationery and Office Supplies Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423120
New
SLED
Fuel FilterNashville Electric Service is soliciting bids for a fuel filter designated as FILTER FUEL MC FG2 FUEL FILTER, with approval limited to the part number FLEETFF149. The solicitation, identified by number Z4869, was posted on July 28, 2026, and requires responses no later than August 3, 2026, at 7:00 PM Eastern Time. This procurement is categorized under state, local, and education (SLED) procurement and is being managed by the agency’s Tennessee operations in Nashville. The place of performance is also Nashville, Tennessee, with no specific zip code provided. Alan Martinez, Procurement Contact, serves as the primary point of contact and can be reached via email at amartinez@nespower.com or by phone at 615-747-3720. Interested vendors must submit their proposals through the official vendor portal linked via the provided UI link.
Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 335314
New
SLED
Relay SocketThe contract solicits a 8-pin screw terminal surface mount relay socket rated for 10 amperes, with approved manufacturers limited to YOUNGNDS-8, MAGNACRF70-464-1, and POTTERB27E122 or equivalent models. This item is being procured by Nashville Electric Service under solicitation number Z4874, which was posted on July 28, 2026, with responses due by August 4, 2026. The procurement falls under a State, Local, or Education (SLED) agency classification and is intended for performance in Nashville, Tennessee. All bids must comply with the specified technical requirements and approved part numbers, and no substitutes are permitted unless explicitly designated as equal. The primary point of contact for procurement inquiries is Shanna Faulk, reachable via email at sfaulk@nespower.com or phone at 615-747-3578, and additional details can be accessed through the vendor portal at the provided link.
Relay and Industrial Control Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339999
New
SLED
Locking BandThe locking band is a one-piece band constructed of 304 stainless steel with a thickness of .022 inches, designed for quick, tool-free installation on electric meters. It features an integrated thumb screw with a flathead slot for manual tightening or loosening, and both the thumb screw and its receiver are permanently affixed to the ring to prevent loss of parts and enable one-handed operation. The band opens and closes by engaging the thumb screw into its receiver and can be secured with or without a barrel lock for added flexibility. A standardized slot is incorporated to accept a common seal, and the design allows side-entry installation from either side of the meter. The optional barrel lock includes a keyless insertion system, is compatible with Nashville Electric Service’s current keying standard, and features a weather seal to guard against dirt and debris. The barrel lock is standard length and ensures durability in outdoor conditions. The contract, titled Locking Band and identified by solicitation number Z4867, is issued by Nashville Electric Service under the Tennessee state agency and is open for bid through the vendor portal. The solicitation was posted on July 27, 2026, with a response deadline of August 3, 2026. The sole approved manufacturer and part number is DEWAL CH3001. Procurement inquiries should be directed to Alan Martinez, the primary contact, via email at amartinez@nespower.com or by phone at 615-747-3720. The performance location is Nashville, Tennessee, and the contract is targeted at state, local, and educational government entities under a SLED classification. Bidders must comply precisely with the material, dimensional, and functional specifications to meet the technical requirements for secure, long-term utility use.
All Other Miscellaneous Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 336370
New
SLED
Supply of 22" Windshield Wiper Blades (TRICO 22-15B / MASTER P MP22B)Nashville Electric Service is seeking to procure 900 units of 22-inch windshield wiper blades, specifically the TRICO 22-15B or MASTER P MP22B models, with no installation or additional services required. The solicitation is classified as a subcontract under NAICS code 336370 and was posted on July 24, 2026, with responses due by July 30, 2026, at 7:00 PM. The place of performance is in Nashville, and interested parties must submit their bids through the vendor portal at the provided link. All units must meet the specified model requirements, and vendors are expected to deliver the product as-is without any added support services.
Motor Vehicle Metal Stamping

POSTED

5 days ago

DEADLINE

in 1 day
View Details