Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Flatbed/Open-Top Transport for Steel Poles

Active

State & Local

Response Deadline11/03/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the specialized transport of five 30-foot steel poles for prime contractors working on Nashville Electric Service projects in Nashville. The selected provider must utilize an open-top vehicle to facilitate efficient unloading and is strictly required to keep the poles wrapped throughout transit to protect the factory-applied dark bronze finish. The primary objective is the delivery of the shafts to the designated site in a condition that preserves the integrity of the factory finish. This opportunity falls under NAICS code 484220, with a response deadline set for November 3, 2026.

General Info

Transport five wrapped 30-foot steel poles to Nashville by November 3, 2026.

Agency

Tennessee → Nashville Electric Service

NAICS

484220 - Specialized Freight (except Used Goods) Trucking, Local

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

This scope was carved out of Z5432.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Steel Pole

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 3

Submission deadline

Response Deadline

11/03/2026, 08:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / AgencyTennessee → Nashville Electric Service

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Hauls 30-foot steel poles for prime contractors on Nashville Electric Service projects. Transports five shafts using an open-top vehicle to facilitate unloading, ensuring poles remain wrapped to protect the factory-applied dark bronze finish during transit. Delivers poles to the designated site in a condition that preserves the factory finish.

Similar Contracts

Same NAICS industry code

Construction of the Recharge Master Plan Update (RMPU) Basin Improvements Project – Montclair Basin Improvements

Solicitation # construction-recharge-master-plan-update-rmpu-basin-improvements-project-montclair-basin-1

Jeremy Harris Construction, Inc. is soliciting bids for the Construction of the Recharge Master Plan Update (RMPU) Basin Improvements Project, specifically focusing on the Montclair Basin Improvements in California. The scope of work is comprehensive, encompassing concrete and asphalt installation, piping, and the construction of restroom facilities. Additionally, the project requires specialized services including trucking, hauling, aggregates, traffic control, street sweeping, and the implementation of SWPPP and erosion control measures. This opportunity is designated as a set-aside for Small Businesses, including SAM.gov designated Small Disadvantaged Businesses and Department of Transportation Disadvantaged Business Enterprises. Interested parties must submit their responses by November 5, 2026. Primary inquiries and submissions should be directed to Jeremy Harris via the provided contact information.

Jeremy Harris Construction, Inc.

POSTED

about 3 hours ago

DEADLINE

Finished Compost Transportation Services

Solicitation # RFP-VC-26-007

The Inland Empire Regional Composting Authority is soliciting proposals under RFP-VC-26-007 for finished compost transportation services from its facility in Rancho Cucamonga, California. The anticipated project start date is February 1, 2027, with an initial five-year term and options for one-year extensions. The selected contractor will be responsible for the timely removal of full trailers using various equipment, such as straight-trucks, tractor-trailer rigs, and walking floors, while adhering to strict noise control and safety regulations from OSHA and CAL OSHA. Proposals must be submitted electronically via PlanetBids by November 12, 2026, and must include a firm fixed-price rate sheet based on mileage brackets of 0-20, 21-30, and 31-40 miles. This is a prevailing wage contract subject to California Labor Code Section 1770, requiring contractors to be registered with the Department of Industrial Relations and provide certified payroll with invoices. Evaluation criteria include price and payment terms, the contractor's experience and performance history, the proposed work plan, and any exceptions taken to the RFP. The contract requires payment and performance bonds equal to the contract price and mandates monthly vehicle self-inspections, which may include digital photographs and maintenance checklists. Invoices are submitted monthly to the Authority's Accounts Payable Department and are typically paid within 30 days, though expedited payment options are available in exchange for a percentage discount.

Inland Empire Utilities Agency

POSTED

about 3 hours ago

DEADLINE

Vehicle Freight and Delivery Services

Capital Regional District

POSTED

about 10 hours ago

DEADLINE

Road Material Hauling Services

POSTED

about 11 hours ago

DEADLINE

Bulk Fuel Delivery Services (Storrs Campus)This subcontract for Bulk Fuel Delivery Services involves the transport and pumping of bulk diesel fuel for prime contractors working on University of Connecticut facility projects. The selected provider will be responsible for hauling fuel via tanker trucks to the Storrs Campus and offloading the fuel into the Central Utility Plant, Supplemental Utility Plant, and other designated storage tanks. To qualify for this contract, providers must utilize bulk fuel tanker trucks and employ drivers holding a Commercial Driver's License with a Hazmat endorsement. This procurement is managed by DAS Procurement for the state of Connecticut under NAICS code 484220, with a response deadline set for November 19, 2026.

DAS Procurement

POSTED

about 12 hours ago

DEADLINE

Construction Debris HaulingThis subcontract opportunity is for construction debris hauling services to support prime contractors on San Francisco Recreation and Parks projects specifically located at Alta Plaza Park. The selected provider will be responsible for loading and transporting demolished concrete and asphalt rubble from the park to approved disposal sites, ensuring the project site remains debris-free. To verify compliance, the contractor must provide all necessary disposal receipts and manifests. The project falls under NAICS code 484220 and is based in San Francisco, California. Interested parties must submit their responses by the deadline of November 19, 2026.

San Francisco Recreation and Parks

POSTED

about 13 hours ago

DEADLINE

Specialty Moving Services for Museum / Archives

Solicitation # 262896MF

Sarasota County is soliciting bids for professional specialty moving services to transport historical artifacts, artwork, and museum objects from designated locations to the new History Center. The project is expected to take between two and four weeks, with performance occurring between November 2026 and February 2027, following the building's substantial completion on November 6, 2026. The selected contractor will lead the planning and project management efforts, ensuring the safe transport of approximately 230 pieces of artwork and the specialized installation of the 850-pound Bertha Palmer Stele. Required equipment includes air-ride, air-conditioned trucks with lift gates, as ramps are strictly prohibited. The contract will be awarded to the responsive and responsible bidder offering the lowest total bid price. Bidders must provide at least two references from the past seven years demonstrating experience with cultural heritage institutions and submit all pricing via the OpenGov portal. Personnel must be experienced in handling fragile artifacts, pass FDLE CJIS background checks, and include at least one English-speaking team member on-site. Strict environmental controls are required to prevent exposure to heat or humidity, and materials cannot be left in vehicles overnight. Insurance requirements include Commercial General Liability of 1 million dollars per occurrence and property coverage for the full replacement cost of County items.

Libraries and Historical Resources

POSTED

about 13 hours ago

DEADLINE

Specialized Delivery and Logistics ProviderThis subcontract for a Specialized Delivery and Logistics Provider involves performing F.O.B. Destination inside delivery for prime contractors supporting Gwinnett County Government supply contracts. The provider is responsible for transporting shrink-wrapped pallets and strapped bundles of archival boxes to two specific facilities in Lawrenceville, Georgia, specifically the Records Management and Clerk of Courts locations. The scope of work requires the use of pallet jacks to ensure materials are delivered inside designated buildings and brought directly to the loading docks. To be eligible for this engagement, the provider must maintain and provide a Certificate of Insurance. The opportunity was posted on October 27, 2026, with a response deadline of November 9, 2026.

Gwinnett County Government

POSTED

about 13 hours ago

DEADLINE

Heavy Equipment Transport and Delivery

Department of Blind and Vision Impaired

POSTED

about 14 hours ago

DEADLINE

4x4 Dump Truck Snow Removal Services

State Highway Administration

POSTED

about 14 hours ago

DEADLINE

Green Waste Hauling and Disposal

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Potable Water Delivery ServicesThis subcontract for Potable Water Delivery Services involves the transport of water from approved sources to designated delivery points for prime contractors working on G44 Air Transportation projects throughout Alabama. The selected provider will utilize water hauling trucks and tankers to deliver the required volume of water, ensuring all shipments meet the State of Alabama satisfactory inspection requirements and comply with the Universal Commerce Code. Interested parties must be registered with Alabama Buys and enrolled in E-Verify to be eligible. The solicitation was posted on October 27, 2026, with a response deadline of November 3, 2026. This opportunity falls under NAICS code 484220 and is managed through the Alabama state agency system.

G44 Air Transportation

POSTED

about 16 hours ago

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Supply of Standard Steel Square Straight Shafts (30')This subcontract involves the manufacture and delivery of five 30-foot standard steel square straight shafts for prime contractors working on Nashville Electric Service projects in Nashville. Each shaft must be constructed with four-hole anchor bases, two detachable 2 inch IPS horizontal tenons, and a factory-applied dark bronze finish. To ensure structural integrity, all poles are required to comply with NESC 90 MPH wind load requirements. The completed shafts must be delivered wrapped to protect the finish. This procurement opportunity is categorized under NAICS code 332323, with a response deadline set for November 3, 2026.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Solicitation # Z5432

Nashville Electric Service has issued Request For Bid Z5432 for the procurement of five 30-foot standard steel square straight shafts. The poles must feature a four-hole anchor base with a bolt circle between 10.5 and 11.5 inches, base nut covers, and a hand hole access of at least 3.5 by 5 inches with a cover. Each shaft must be factory-applied in dark bronze and equipped with two detachable 2-inch IPS horizontal tenons for luminaire mounting. Technical requirements specify that the poles must comply with the NESC 90 MPH wind load requirement and possess the strength to support two 50lb fixtures at 180 degrees with an EPA of 2.5 square feet each on a 10-inch arm. Bids must be submitted via the Bid Center by 2:00 pm local time on November 3, 2026. Only approved brands, specifically Hapco and Lytepole, are acceptable, and alternate brands will not be considered. To ensure quality and ease of unloading, poles must be wrapped to protect the finish during shipment and delivered using an open-top vehicle. Vendors are required to state their earliest delivery in calendar days, as delivery time may be a factor in the award decision. The primary procurement contact for this solicitation is Shanna Faulk.

POSTED

DEADLINE

Supply of Figure 8 Swing Links (30K lbs)This subcontract agreement involves the supply of forged steel Figure 8 swing chain links for prime contractors working under Nashville Electric Service contracts. The required components must feature two 7/8 inch eyes, possess an ultimate strength of 30,000 pounds, and be galvanized in accordance with ASTM A123 standards. All deliverables must strictly adhere to specified brand and part number requirements for ItemId 182574500. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must respond by October 29, 2026, regarding this procurement categorized under NAICS code 332510.

Hardware Manufacturing

POSTED

DEADLINE

Supplier of 3M Safety Walk Anti-Slip RollsThis subcontract agreement involves the procurement and delivery of industrial anti-slip safety walking surfaces for prime contractors serving the Nashville Electric Service in Tennessee. The scope of work specifically requires the supply of 3M-AUTO 19282 Safety Walk Black Medium Grade rolls, or an approved equivalent, measuring 6 inches by 60 feet. The selected supplier is responsible for the physical delivery of the grip tape rolls to the designated facility in Nashville, ensuring strict adherence to established delivery timelines. This opportunity is categorized under NAICS code 423830 and is managed through the Nashville Electric Service vendor portal.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of 3P.S.T. Back Connected Knife SwitchesThis subcontract involves the supply and delivery of industrial electrical knife switches for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work specifically requires the provision of AVO MULT MTS S-203-D-B units configured as 3P.S.T. back connected. These units must include BC barriers, ganged handles, dividers, and TBT-26 long studs, though mounting bars are excluded from the delivery requirements. The procurement is categorized under NAICS code 334418. Interested parties should note that the posting date is October 23, 2026, with a response deadline set for October 30, 2026. All physical 3P knife switch units must be delivered in accordance with the specified technical configurations to support the agency's infrastructure projects.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Lineman's Rubber Glove ProtectorsThis subcontract involves the manufacture and supply of size 9 leather protector gloves for prime contractors working on Nashville Electric Service safety equipment projects. The gloves must be designed for use with 5,000 volt rubber gloves and strictly adhere to Federal Specification KK-L-170C and ASTM Specification F696-91. Each pair must be individually plastic-bagged and stamped on the cuff with the rubber glove hand size, the manufacturer name, and the NES designation. The scope of work requires the delivery of 24 pairs of these marked protector gloves to Nashville. This opportunity is categorized under NAICS code 314121 and is managed by the Nashville Electric Service in Tennessee. Interested parties should note the response deadline of October 30, 2026.

Curtain and Drapery Mills

POSTED

DEADLINE

Flatbed Hauling and Unloading ServicesThis subcontract for Flatbed Hauling and Unloading Services involves the transportation and delivery of 400 utility poles to various yards in Nashville, Tennessee, in support of Nashville Electric Service utility projects. The selected provider will perform truck freight transportation using flatbeds, with operations scheduled between 6:30 AM and 2:30 PM CST. The scope of work requires the use of specialized equipment for on-site unloading, including crane trucks, knuckle booms, or heavy-duty forklifts. To qualify, personnel must possess a valid CDL and proper equipment operator certification. Interested parties must respond by November 5, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Treated Wooden Utility Pole SupplierThis subcontract agreement establishes the requirements for a supplier to provide treated wooden utility poles for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work involves the manufacture and delivery of 400 40-foot Class 4 poles constructed from either Douglas Fir or Southern Pine. All materials must adhere strictly to NES Specifications 33-151R13 or 33-252R10. The supplier is responsible for the complete production process, including roofing and gaining according to NES Drawing 910 and the application of necessary chemical preservation treatments. The contract concludes upon the successful delivery of the 400 finished and processed poles. Interested parties must respond by November 5, 2026.

Wood Window and Door Manufacturing

POSTED

DEADLINE

Steel Utility Pole Supplier (60ft Class H3)This subcontract agreement establishes the requirements for a supplier to provide hot-dipped galvanized steel poles for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing 60-foot poles that meet Class H3 equivalent standards, specifically maintaining a minimum capacity of 0243 ft-kips at ground level. The scope of work includes providing 1 inch jacking nuts and bolts for both the top and bottom halves of the poles, with a strict construction limit of no more than two sections. The selected supplier is responsible for the final delivery of the finished steel poles to Nashville Electric Service.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Flatbed Delivery ServicesThis subcontract for Flatbed Delivery Services involves the transportation of 200 fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects. The selected provider will be responsible for hauling these units from the manufacturer to designated delivery points in Nashville using an open flatbed truck or trailer as specified in the statement of work. To qualify for this engagement, the contractor must possess standard commercial trucking licenses and the required insurance coverage. The solicitation was posted on October 23, 2026, with a response deadline of November 3, 2026. This project falls under NAICS code 484220 for specialized freight trucking.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Tubular Fiberglass Crossarm SupplierThis subcontract agreement establishes the supply of 200 ten-foot tubular fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing components that adhere to NES Specification ESI-4-E, with dimensions ranging from 3 1/2" x 4 1/2" to 5" x 7". The scope of work includes the provision of braceless mounting assemblies utilizing two 5/8" diameter bolts with vertical spacing of either 8" or 12". The contract is categorized under NAICS code 326121 and requires the delivery of the full quantity of crossarms and their corresponding mounting assemblies.

Unlaminated Plastics Profile Shape Manufacturing

POSTED

DEADLINE

Engine Air Filter Supply for Tennant Model 6600 SweeperThis subcontract involves the supply and delivery of engine air filters for prime contractors maintaining Nashville Electric Service equipment. The scope is specifically for Tennant Model 6600 Sweepers equipped with 1.6 Liter GM Engines. The contractor is required to source and deliver either TENNANT Part #369746 or DONALDSON Part #P831424 directly to the designated NES location in Nashville. Strict adherence to the specified manufacturer part numbers is mandatory, and alternate brands will not be accepted. Interested parties must respond by October 29, 2026, regarding this requirement categorized under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Log Hauling Services

South Carolina Forestry Commission

POSTED

DEADLINE

Asphalt Millings Hauling and Removal Services

City of Batavia

POSTED

DEADLINE

F.O.B. Destination Vehicle Hauling

POSTED

DEADLINE

Heavy Electrical Equipment Transport

University of Michigan

POSTED

DEADLINE

in about 1 month

Mattress Collection and Transportation Services

Prince William County BU

POSTED

DEADLINE

NY/NJ Regional Freight and Delivery Services

The Port Authority of New York and New Jersey

POSTED

DEADLINE

Demolition Debris Hauling and Disposal

POSTED

DEADLINE

Heavy Haul Transport and Traffic Coordination

LSU - Baton Rouge

POSTED

DEADLINE

Specialized Freight Delivery for Food Service Supplies

Sheriff-Coroner

POSTED

DEADLINE

Industrial Equipment Freight and Delivery

Hampton Roads Sanitation District

POSTED

DEADLINE

Specialized Equipment Delivery Services

Albany State University

POSTED

DEADLINE

HVAC Rigging and Equipment Moving Services

Public Facilities

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS