This Solicitation opportunity from Department Of Defense was posted on May 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CABLE, INVASIVE BLOO

Closed

SPE2DS-26-T-9547Federal

Submission Closed04/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334511

New

Federal

Supply of UAS Speed Controllers (ESC)

POSTED

DEADLINE

Supply of FPV Flight Controllers (STM32H7)

POSTED

DEADLINE

Lightweight Handheld CUAS Hardware Provider

POSTED

DEADLINE

CEIA Open Gate Weapon Detection System Supply

POSTED

DEADLINE

70--PROCESSOR,DISPLAY A, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB29

This contract is for the procurement of 17 units of a flight critical display processor under NSN 7R-7010-015222097-LC, with delivery terms set as FOB Origin. Due to the critical nature of the part and the fact that essential technical data and manufacturing knowledge are held by specific sources, the government requires engineering source approval from the design control activity to ensure quality. The government intends to negotiate with a single source under FAR 6.302-1, though other responsible sources may submit capability statements or proposals within the specified timeframe for consideration. Prospective bidders who are not already approved sources must submit detailed information as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures. Failure to provide the required data or proof of a pending approval request will result in the proposal not being considered for award. The government maintains the discretion to proceed with a non-competitive award based on fleet support needs if new source approvals cannot be processed in time to meet operational requirements.

Navsup Weapon Systems Support

POSTED

DEADLINE

Thermal Imaging System

Solicitation # SPRDL1-26-R-A035

This pre-solicitation issued by the DLA Land Warren under solicitation number SPRDL1-26-R-A035 is for the procurement of Thermal Imaging Systems, identified by NSN 5855-01-536-9647 and part number 512991310-2. The contract requires a minimum quantity of 26 units with a maximum ceiling of 558 units, with a delivery due date on or about October 31, 2026. Shipping is designated as FOB Destination, and the place of performance is located in New Cumberland, Pennsylvania. This opportunity is a total small business set-aside, meaning only offers from small business concerns will be considered. Interested parties must submit their responses by the deadline of September 24, 2026. Detailed solicitation documents and instructions for obtaining necessary drawings are available through the SAM.gov website.

POSTED

DEADLINE

736 SFS - Handheld Lightweight CUAS

Solicitation # FA524026QM116

Solicitation FA524026QM116 is a combined synopsis and request for quotes issued by the Department of the Air Force 36th Contracting Squadron for a non-kinetic, portable, and lightweight handheld Counter-Unmanned Aerial System (C-UAS). This acquisition is a 100 percent Small Business Set-Aside under NAICS code 334511. The required system must feature rifle-like ergonomics, Android Team Awareness Kit (ATAK) compatibility, and the ability to detect drones up to 7 km across the 400 MHz to 6 GHz spectrum. The device must be capable of disrupting command, control, and GNSS signals to force drones to land or return to origin. The government will award the contract based on best value, evaluating both price reasonableness and the offeror's technical approach to meeting the specified salient characteristics. Proposals must be submitted in two volumes, covering price and technical specifications, by September 21, 2026. Delivery is required within 120 days after receipt of order, with the destination being APO AP 96543-4048. Payment will be processed through the Wide Area WorkFlow (WAWF) system. All offerors must be active in the System for Award Management (SAM) and comply with specific DFARS and FAR clauses, including prohibitions on covered defense telecommunications equipment.

POSTED

DEADLINE

Multi-bank RTK GNSS Module

Solicitation # W911S226U4472

Solicitation W911S226U4472 is a Request for Quotation issued by the Department of Defense, W6QM Micc-Ft Drum, for 100 units of Here4 GNSS Modules. This acquisition is a Total Small Business Set-Aside and is designated as brand name or equal. The required modules must be new equipment and feature the U-Blox NEO F9P chipset with RTK capability. Technical specifications include support for the CAN protocol, JST-GH or JST-SH connectors, built-in anti-spoofing mechanisms, and multi-band reception for at least L1, L5, E1, and E5 signals. All products must be NDAA compliant. Quotes must be submitted exclusively through the PIEE Solicitation module to be considered responsive. Offerors are required to provide datasheets or specifications and must complete Attachment 1 regarding certifications and the country of origin. For products offered as equal, the vendor must provide the brand name, model number, and descriptive literature. The award will be granted to the responsible offeror whose proposal is most advantageous to the government based on price and technical factors. Delivery is preferred within 30 days on an F.O.B. destination basis.

POSTED

DEADLINE

13--AIR FLASK,TORPEDO

Solicitation # N0010423QUC40

This solicitation is for the procurement of torpedo air flasks under the Department of Defense, specifically through the Navsup Weapon Systems Support Mech. The contract requires the manufacture of items based on specific cage code designs and mandates strict adherence to MIL-STD packaging and IUID requirements. Key quality assurance terms include mandatory government source inspection and the requirement for awardees to be authorized sources, with distributors providing official OEM authorization letters to ensure traceability. The solicitation has undergone multiple amendments regarding the closing date and quantity, with the most recent update extending the response deadline to October 13, 2026, and adjusting the quantity to 10 units. All quotes must be submitted electronically to the designated point of contact and include detailed pricing, lead times, and CAGE information. Freight is established as FOB Origin, and the final award will be issued bilaterally, requiring written acceptance from the contractor.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Echodyne EchoShield Radar System

Solicitation # FA568226Q8034

The Department of the Air Force, 31st Contracting Squadron, is seeking a single Firm Fixed Price purchase order for the procurement of the Echodyne EchoShield Radar System for delivery and assembly at Aviano Air Base, Italy. This acquisition is a Total Small Business Set-Aside under NAICS code 334511. The requirement consists of four EchoShield radars in NATO Green, one Gen 1 Rapid Deployment Kit, and four software update and technical support packages for a duration of 36 months. The EchoShield is a software-defined, cognitive 4D pulse-Doppler radar utilizing Metamaterials Electronically Steerable Antenna technology, designed for multi-mission operations such as counter-UAS and coastal security. The contract includes a requirement for a one-time assembly instruction block and system training for four to eight personnel at the destination. Evaluation for award will be based on the most advantageous offer, considering technical capability to meet requirements, delivery terms, and past performance. All electronic invoicing and receiving reports must be processed through the Wide Area WorkFlow system. While the solicitation has undergone amendments to update salient characteristics and extend the deadline, the government has noted that funds are not presently available, and no award will be made until such funding is secured.

FA5682 31 Cons (unit 6102)

POSTED

DEADLINE

PR23291 W8486-260708 Paper Chemical Agent Detector

Solicitation # WS5642984329

The Department of Public Works and Government Services, acting on behalf of the Directorate of Land Procurement for the Department of National Defence, has issued a Request for Information regarding a future Paper Chemical Agent Detector project. This solicitation, identified by number WS5642984329, seeks to identify industry interest and the technical capability of providers to meet specific project requirements. The performance of the contract is expected to take place within the National Capital Region. Interested parties must submit all required documentation by the deadline of September 22, 2026. The procurement process is categorized under NAICS code 334511 and is managed by the Government of Canada. Primary inquiries and submissions should be directed to the contracting authority, Stephen Van Den Hanenberg.

Department of Public Works and Government Services

POSTED

DEADLINE

Radar Set Subassembly Fabrication and Assembly

MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days

General Info

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

900 HANGAR AVE BLDG 2060, JBPHH, HI, 96853-5256, USA

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-9547.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

Response DeadlineApr 20

Deadline has passed

PostedMay 12

Solicitation

Submission Closed

04/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressUSA

Contacts

Patrick Esposito

contact@example.gov

+1 (555) 000-0000

Full Description

CABLE,INVASIVE BLOO
CABLE<(>,<)> INVASIVE BLOOD PRESSURE TRANSDUCER
TRANSDUCER INTERFACE CABLE, RIGHT ANGLE
EDWARDS CONNECTOR, FOR OVAL TRANSDUCER
CONNECTION
.
UNIT OF ISSUE EACH, EA
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED.
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. .
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:
SPE2DS-26-T-9547
SECTION B
https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MCKESSON MEDICAL-SURGICAL GOVERNMENT 1EU19 P/N 802437
ZOLL MEDICAL CORPORATION 0UJ27 P/N 8300-0787-01
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015966058 0001 EA 2.000
NSN/MATERIAL:6515016150921
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
SPE2DS-26-T-9547
SECTION B
PR: 7015966058 PRLI: 0001 CONT’D
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PARCEL POST ADDRESS:
HT1031
15TH MDSS SGSM PA
CP 808 448 6198 HANGAR 4
900 HANGAR AVE BLDG 2060
JBPHH HI 96853-5256
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
HT1031
15TH MDSS SGSM PA
CP 808 448 6198 HANGAR 4
900 HANGAR AVE BLDG 2060
JBPHH HI 96853-5256
US
M/F: (TCN) HT103160754201
RDD:
PROJ: TP 3
SUPP ADD: 3H589T SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A01 DIST: ADV: 2A FC: J6
Need Ship Date:00/00/0000 Original Required Delivery Date:03/20/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7015772104 0001 EA 1.000
NSN/MATERIAL:6515016150921
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE2DS-26-T-9547
SECTION B
PR: 7015772104 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FM7080
FM7080 KELLY CSDC AFMEDCOM A410W
BLDG 1534 CP 2103383234
601 DAVY CROCKETT RD
SAN ANTONIO TX 78226
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FM7080
FM7080 KELLY CSDC AFMEDCOM A410W
BLDG 1534 CP 2103383234
601 DAVY CROCKETT RD
SAN ANTONIO TX 78226
US
M/F: (TCN) FM708060620489
RDD:
PROJ: TP 3
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A0A DIST: ADV: 2A FC: 6B
Need Ship Date:00/00/0000 Original Required Delivery Date:03/06/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7015790324 0001 EA 1.000
SPE2DS-26-T-9547
SECTION B
PR: 7015790324 PRLI: 0001 CONT’D
NSN/MATERIAL:6515016150921
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FM7080
FM7080 KELLY CSDC AFMEDCOM A410W
BLDG 1534 CP 2103383234
601 DAVY CROCKETT RD
SAN ANTONIO TX 78226
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FM7080
FM7080 KELLY CSDC AFMEDCOM A410W
BLDG 1534 CP 2103383234
601 DAVY CROCKETT RD
SAN ANTONIO TX 78226
US
M/F: (TCN) FM708060630326
RDD:
PROJ: TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2A FC: 6B
Need Ship Date:00/00/0000 Original Required Delivery Date:03/09/2026
SPE2DS-26-T-9547
SECTION B
PR: 7015867555 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 7015867555 0001 EA 1.000
NSN/MATERIAL:6515016150921
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FY2913
FY2913 27TH SOMDSS SGSL
CP 5757847277
224 W D L INGRAM BLVD BLDG 1408
CANNON AFB NM 88101-5009
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FY2913
FY2913 27TH SOMDSS SGSL
CP 5757847277
224 W D L INGRAM BLVD BLDG 1408
CANNON AFB NM 88101-5009
US
M/F: (TCN) FM991160680467
RDD:
PROJ: TP 3
SUPP ADD: FY2913 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 15
SPE2DS-26-T-9547
SECTION B
PR: 7015867555 PRLI: 0001 CONT’D
DIC: A0A DIST: ADV: 2A FC: 6B
Need Ship Date:00/00/0000 Original Required Delivery Date:03/13/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0005 7016334572 0001 EA 1.000
NSN/MATERIAL:6515016150921
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FM9133
FM9133 AFMEDCOM A4 10W A410W
BLDG 1534 CP 2103383375
601 DAVY CROCKETT RD
SAN ANTONIO TX 78226
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FM9133
FM9133 AFMEDCOM A4 10W A410W
BLDG 1534 CP 2103383375
SPE2DS-26-T-9547
SECTION B
PR: 7016334572 PRLI: 0001 CONT’D
601 DAVY CROCKETT RD
SAN ANTONIO TX 78226
US
M/F: (TCN) FM913361030158
RDD:
PROJ: TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2A FC: 6B
Need Ship Date:00/00/0000 Original Required Delivery Date:04/16/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0006 7015873813 0001 EA 1.000
NSN/MATERIAL:6515016150921
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
W904EG
W0FE USA WAR RES FS JAPAN
17 ASG KANAGAWA KEN BLDG 116 3
KAMIYABE 600 SAGAMIHARA SHI
KANAGAWA-KEN 2520201
JP
SPE2DS-26-T-9547
SECTION B
PR: 7015873813 PRLI: 0001 CONT’D
MEDICAL AIR BRIDGE WEST. FOR ELIGIBLE ITEMS: SD0379. CARDINAL HEALTH, 4551 EAST PHILADELPHIA ST ONTARIO,
CA (TEXT IN ENHANCEMENT)
M/F: (TCN) W25MWY60692521
RDD: 091
PROJ: TP 1
SUPP ADD: W904EG SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: ADV: 2A FC: T6
Need Ship Date:00/00/0000 Original Required Delivery Date:03/13/2026
SPE2DS-26-T-9547 NSN/Part Number: 6515-01-615-0921 Quantity: 2 EA Purchase Request: 7016334572QTY: 1 Delivery: 5 days ADO