Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CABLE, RADIO FREQUENCY

Active
SPE7M1-26-T-218HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 6,000 linear feet of radio frequency cable under solicitation SPE7M1-26-T-218H, with a delivery requirement of 52 days from award and delivery point at FOB origin. The cable must conform to technical specifications MIL-DTL-17/127D and MIL-DTL-17J, with part number M17/127-RG393, and must be supplied in continuous length depending on the advice code, which overrides any conflicting schedule requirements. Packaging and preservation must comply with MIL-STD-2073-1E, MIL-DTL-12000, and MIL-STD-129, including special marking and palletization per DLA requirements. Mercury and mercury-containing compounds are strictly prohibited in the cable, its preservation, packaging, packing, and marking, with limited exceptions for functional uses in batteries, lamps, instruments, sensors, controls, weapon systems, and chemical reagents approved by NAVSEA, where such items must include a secondary containment and be shock-proof per NAVSEA 5100-003D. The contract mandates CMMC Level 2 self-assessment for cybersecurity compliance and incorporates all applicable DLA technical and quality requirements referenced by R or I numbers from the DLA Master List. The item is subject to a 5% quantity variance and will be inspected and accepted at destination. The delivery address is DLA Distribution San Diego, with a required ship date of September 21, 2026, and an original delivery date of February 17, 2027. All unit of issue and purchase unit references must align with the official DLA ANSI X12 standards.

General Info

6,000 linear feet of MIL-DTL-17/127D RG393 cable, FOB origin, delivery by Sept 21, 2026, no mercury, CMMC Level 2, DLA standards.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

PR: 7017439395 PRLI: 0001 CONT’D, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M1-26-T-218H for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE,RADIO FREQUENCY
CABLE,RADIO FREQUEN
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
500 FT/SPOOL, LENGTHS PER SPEC
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
If Advice code is 2N, 28, or 34, this requirement is to provide material in continuous length. Multiple unit packs are unacceptable. Only continuous length will meet the requirement. If Advice code is 2P or 39, this requirement is to provide material in continuous length. Multiple unit packs are acceptable. Advice code (ADV) is located after the "For Government Use Only" heading under the Shipping Information. If there are inconsistencies between the schedule and Advice code, the Advice code takes precedence. **************************************************
CRITICAL APPLICATION ITEM
SPE7M1-26-T-218H
SECTION B
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-17/127D(2) REVISION NR D DTD 02/23/2024 PART PIECE NUMBER: M17/127-RG393
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-17J(5) SUP 1 REVISION NR J DTD 05/21/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017439395 0001 FT 6,000.000
NSN/MATERIAL:6145001499176
DELIVERY (IN DAYS):0052
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 5% MINUS 5%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:ZZZ PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPECIAL QUP CODE ZZZ = 1000 PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION: MIL-DTL-12000, FOR CABLE, CORD AND WIRE.
.. MARKING SHALL BE IAW MIL-DTL-12000 AND MIL-STD-129
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SPE7M1-26-T-218H
SECTION B
PR: 7017439395 PRLI: 0001 CONT’D
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:09/21/2026 Original Required Delivery Date:02/17/2027
SPE7M1-26-T-218H NSN/Part Number: 6145-00-149-9176 Quantity: 6,000 FT Purchase Request: 7017439395QTY: 6000 Delivery: 52 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331491
New
DIBBS
SHEET, METALAluminum alloy sheet metal, 0.063 inches thick, 48 inches wide, and 144 inches long, weighing approximately 42.24 pounds per sheet, is being procured under solicitation SPE8E9-26-T-3162 with a total quantity of 140 sheets. The material must conform strictly to ASTM B666/B666M-20 and SAE AMS-QQ-A-250/8C specifications, with alloy 5052 in H24 or H34 temper, and must be supplied in whole foot lengths only. All sheets require continuous identification markings including the DLA contract order number, NSN, specification revision, alloy and temper, manufacturer's name, heat and lot number, and exact dimensions, applied via stamping or stenciling that is legible, waterproof, and non-contaminating. Adhesive labels are required in lieu of line markings. A Certificate of Quality Compliance must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with special preservation code ZZ conforming to ASTM B660 Level A, and marking in accordance with MIL-STD-129. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible, and any deviation from this requirement must be explicitly stated. No test coupons are permitted, and failure to meet dimensional or marking requirements will result in rejection. Delivery is FOB origin with a 50-day timeline, to be split between two DLA distribution depots in Cherry Point, NC and Hill AFB, UT. The contract is a total small business set-aside, and inspection and acceptance occur at the destination.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331491
New
DIBBS
CABLE, RADIO FREQUENCYThe contract encompasses the procurement of radio frequency cable under NSN 6145012327484 as part of a unilateral Indefinite Delivery Contract (IDC) issued by the Department of Defense’s Maritime Supply Chain. The estimated quantity is 155,500 feet with a guaranteed minimum of 23,325 feet post-order acceptance, and the maximum contract value is capped at $350,000. Deliveries are to be made FOB origin within 63 days of order placement, with inspection and acceptance occurring at the destination. The cable must conform to technical specifications MIL-DTL-17J(5) and MIL-DTL-17/176E(1), and its packaging, preservation, and labeling must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-12000. Palletization adheres to DLA’s RP001 requirements, and all marking must follow standardized DoD bar-coding practices. The item is designated as a commercial item and is listed on a Qualified Products List, requiring compliance with applicable quality standards. Mercury and mercury-containing compounds are prohibited unless used in approved functional applications such as batteries, fluorescent lamps, or instrument controls, with portable mercury-containing devices needing shockproof construction and secondary containment per NAVSEA 5100-003D. The contract mandates strict adherence to cybersecurity requirements including safeguarding covered defense information and reporting cyber incidents under DFARS 252.204-7012, and prohibits the use of hexavalent chromium and covered defense telecommunications equipment from Communist Chinese military companies. Contractors must provide representations regarding their small business status, Unique Entity ID, and CAGE code, and are subject to clauses addressing trafficking in persons, employment eligibility, whistleblower rights, and ethical conduct. Invoicing is required through WAWF using electronic submission formats compliant with DFARS 252.232-7006, and no payment or accounting details are specified until the award is finalized. All technical and quality requirements not explicitly stated are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METALAluminum alloy sheet metal measuring 0.125 inches thick, 48 inches wide, and 144 inches long, with a nominal weight of 83.810 pounds per sheet, is being procured under solicitation SPE8E9-26-T-3107 for a total quantity of 79 sheets at $79.00 per sheet. The material must conform strictly to SAE AMS4016N and ASTM B209 standards with alloy 5052 in H32 temper, and all sheets must be exact whole-foot lengths without test coupons. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and non-compliance requires explicit declaration of deviation. Every shipment must include a Certificate of Quality Compliance and carry continuous identification markings on each unit including contract number, NSN, specification revision, alloy, grade, manufacturer details, heat and lot numbers, and dimensions. Markings must be stamped or stenciled in legible, waterproof, non-contaminating fluid and must withstand normal handling; adhesive labels are required for products under 0.250 inches in nominal OD. Packaging must adhere to MIL-STD-2073-1E and ASTM B660 Level A requirements with preservation method ZZ and marking in compliance with MIL-STD-129R. The contract is a total small business set-aside under NAICS code 331491, with delivery to New Cumberland, PA, required within 87 days of award under FOB origin terms and zero tolerance for quantity variance. All materials are designated as critical application items, and failure to meet requirements may result in rejection, civil penalties, or criminal liability. Continuous identification, full QSLD compliance, and documentation submission are mandatory and non-negotiable.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331491
New
Federal
95--SHEET,METALThe solicitation seeks quotations for 210 sheets of metal designated by NSN 9535002320522, with quantities divided into three lines: 150 units, 30 units, and another 30 units, all to be delivered to the DLA Distribution Depot in Oklahoma within 167 days after award. The procurement is conducted under an RFQ with electronic submission only, and no hard copies of the solicitation are available; all documents including drawings and military specifications must be accessed electronically through the provided SAM.gov link. The contract falls under NAICS code 331491 and is managed by the Defense Logistics Agency Troop Support headquartered in Philadelphia, Pennsylvania. Responsible suppliers may submit quotes through the designated portal, and responses must be received by the deadline of July 24, 2026. All inquiries should be directed via email to the primary point of contact listed in the solicitation, with reference to the official document available on DIBBS.
DLA Troop Support

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 331491
New
Federal
95--SHEET,METALThe contract solicitation seeks 600 units of sheet metal identified by NSN 9535002320565, with 300 units allocated to each of two line items, both requiring delivery to the DLA Distribution Depot in Oklahoma within 60 days of award. The procurement is conducted under a combined solicitation issued as a Small Business Set-Aside, exclusively open to small businesses as defined by the SBA, with the NAICS code 331491 indicating the relevant industry classification. The solicitation, numbered SPE8E926Q0600, was posted on July 20, 2026, and responses must be submitted electronically by July 27, 2026, with no hard copies available. All responsible sources may submit quotes if received on time, and digitized drawings, military specifications, and standards can be accessed or ordered online. The contracting office is under the Department of Defense's DLA Troop Support, based in Philadelphia, Pennsylvania, and inquiries must be directed via email to the designated point of contact, with additional information accessible through the provided SAM.gov link or DIBBS website using the solicitation number.
DLA Troop Support

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331491
New
Federal
95--SHEET,METALThe contract seeks procurement of 330 units of metal sheeting with NSN 9535002320519, divided into three lines of 50, 175, and 100 units respectively, all to be delivered to DLA Distribution San Diego within 118 days of award. The solicitation is issued as a Request for Quote under solicitation number SPE8E926Q0603, with a response deadline of July 24, 2026, and was posted on July 20, 2026. Only electronic submissions are accepted, and hard copies of the solicitation are not available; interested vendors must access the full documentation via the provided online link. The procurement is open to all responsible sources without set-aside restrictions, and digitized technical documents such as military specifications and drawings may be retrieved electronically. The contracting activity is managed by the Defense Logistics Agency Troop Support, with the office headquartered in Philadelphia, Pennsylvania, and primary inquiries must be directed via the designated email address provided in the solicitation. The North American Industry Classification System code applicable to this procurement is 331491, indicating it falls under other aluminum rolling, drawing, and extruding.
DLA Troop Support

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 331491
New
DIBBS
WIRE, ELECTRICALThis contract specifies the procurement of electrical wire designated by NSN 6145011953394, with a total quantity of 72,500 feet divided into two line items: 3,644 feet and 68,856 feet, both to be delivered in continuous lengths as dictated by applicable advice codes, where multiple unit packs are permitted only under specific advice codes 2P or 39. The wire must comply with technical specifications referenced under SAE AS22759/43B Revision B and SAE AS22759E Revision E, both dated July 1, 2023 and 2024 respectively, and is classified as a critical application item requiring strict adherence to configuration management and engineering change procedures. All materials must be packaged and preserved per MIL-STD-2073-1E and MIL-DTL-12000, marked according to MIL-STD-129 with no special marking required, and palletized in accordance with DLA packaging requirements. Delivery is FOB origin with a 5% quantity variance allowed, inspection and acceptance occurring at the destination, and delivery timelines set at 194 days from contract award. Two separate delivery points are designated—New Cumberland, Pennsylvania and Tracy, California—with distinct shipping addresses and need-by dates of May 10, 2027 and February 10, 2027 respectively, the latter being earlier than the original required delivery date of May 3, 2027. The contract incorporates DLA’s master list of technical and quality requirements, requires compliance with government identification removal protocols for non-accepted items, and applies to a qualified products list item, ensuring only approved manufacturers may supply the material. The procurement is governed by the Department of Defense and managed under solicitation SPE7M1-26-T-218P, with primary point of contact Alisha Blanton at DLA.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331491
New
Federal
61--CABLE,RADIO FREQUENCYThe solicitation seeks quotes for 6,000 feet of coaxial cable designated by NSN 6145001499176, a qualified products list item used for radio frequency applications. All responses must be submitted electronically through the designated online portal, with no hard copies available; bidders must ensure timely submission by the deadline of July 30, 2026, to be considered. The contract requires delivery of the full quantity to DLA Distribution San Diego within 52 calendar days after award, and all suppliers must comply with applicable military specifications, which can be accessed electronically. This is a full and open competition with no set-aside, allowing any responsible source to respond, and the solicitation number SPE7M126T218H can be searched via the DIBBS platform for full details. The contracting office is part of the Department of Defense under DLA Land and Maritime, located in Columbus, Ohio, with all inquiries directed to the designated point of contact via email.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331491
New
DIBBS
DUCT ASSEMBLY, AIR CThe contract is for a single unit of DUCT ASSEMBLY, AIR C with NSN/Part Number 1660-01-114-7242, under solicitation SPE4A7-26-T-578M, with a response deadline of July 24, 2026, and a delivery requirement of 290 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RD005 for CMMC Level 2 C3PAO certification, RD002 for Covered Defense Information, RP001 for DLA packaging standards, RQ009 for inspection and acceptance at origin, RQ011 for removal of government identification from non-accepted supplies, and RQ032 for export control of technical data. The item contains technical data subject to ITAR or EAR regulations, meaning any export, including disclosure to foreign persons within the U.S., requires prior authorization from the Department of State or Department of Commerce, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors with approved U.S./Canada Joint Certification Program certification, completed DOD export control training, and approved status via the DLA Export-Controlled Technical Data Questionnaire. The procurement is for a federal agency under the Department of Defense, with NAICS code 331491, and performance is expected within the United States.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 331491
New
DIBBS
WIRE, ELECTRICALThis contract specifies the procurement of 2,000 feet of electrical wire, identified by NSN 6145012019532, under solicitation SPE7M1-26-T-212L, with a required delivery within 140 days of award. The wire must conform to MIL-DTL-24643/3F Revision F dated 11/27/2023, and is classified as a critical application item requiring strict compliance with technical specifications. The product must be supplied in continuous length, as dictated by the advice code, with multiple unit packs prohibited if the code is 2N, 28, or 34, but permitted if the code is 2P or 39, with the advice code taking precedence over any conflicting schedule details. The wire is subject to qualification listing requirements since it is listed on a primary QPL or QML, and full and open competition applies. Mercury or mercury-containing compounds are strictly prohibited in direct contact with the wire, except for specific functional components like batteries or instruments, which must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must follow MIL-STD-2073-1E and MIL-DTL-12000 for preservation, with marking compliant to MIL-STD-129 and palletization according to DLA packaging standards. Delivery is FOB origin to the designated receiving warehouse in Tracy, California, with a 5% quantity variance allowed. Inspection and acceptance occur at the destination, and the contract includes special preservation and packaging requirements. The required delivery date is January 6, 2027, with a need ship date of December 15, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and revisions are controlled based on solicitation or award dates depending on acquisition size.
MARITIME SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 331491
New
DIBBS
DUCT ASSEMBLY, AIR CThe contract solicitation SPE4A0-26-T-3881 calls for the procurement of one DUCT ASSEMBLY, AIR C, identified by NSN 1660-01-223-1222 and part number L5351727-001, to be delivered to Ellsworth AFB, South Dakota, within five days of award, with FOB Origin terms requiring the offeror to include all transportation costs to a contiguous U.S. location. The item is subject to strict technical and quality requirements, including adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over all other standards. Quality systems must comply with ISO 9001:2015 for both manufacturers and non-manufacturers, with additional tailored requirements applying, and the manufacturer’s inspection system must meet SAE AS9003 or ISO 9001 tailored to SAE AS9003. Cybersecurity compliance is mandatory at CMMC Level 2 through self-assessment, and the item is classified as Covered Defense Information requiring appropriate safeguards. All packaging must conform to ASTM D3951 and MIL-STD-129 labeling, with palletization per RP001 DLA Packaging Requirements and a unit pack quantity of one. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required if using MIL-STD-105/ASQ Z1.4, and attribute verification levels of VII, IV, and II assigned to critical, major, and minor characteristics respectively. Measuring and test equipment must meet RT001 standards. The government will inspect and accept the item at destination, and contractors must use WAWF for invoicing and receiving reports compliant with DFARS Appendix F. Government identification on non-accepted supplies must be removed per RQ011, and no quantity variance is permitted. The contract includes configuration change management requirements for engineering change proposals or deviation requests, and the supplier must submit a source approval request with full documentation as required by RC001. The delivery is to be shipped via traceable freight methods—parcel post is prohibited—and the point of contact for the solicitation is Thomas Anderson of DLA Aviation, with a response deadline of July 22, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

7 days ago

DEADLINE

in 1 day
View Details
NAICS: 331491
Federal
BAR,METALThis contract, issued under solicitation number N0010426QFF04 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, requires the supply of metal bars meeting stringent specifications for use in critical shipboard systems designated as Special Emphasis Level I material. The material must conform to SAE-AMS-QQ-S-763 for corrosion-resistant steel, specifically 304 Condition B in 1.5-inch round form, with strict requirements on chemical composition, mechanical properties, and magnetic permeability not exceeding 2.0. All material must be traceable from raw stock through every manufacturing stage to final delivery, with unique heat-lot markings permanently applied per MIL-STD-792 and accompanied by certified test reports that include complete, unqualified documentation of chemical and mechanical analysis. Re-certification is mandatory if any fabrication process alters the material’s properties, and no transcription of certification data is permitted. Quality assurance is rigorously enforced, requiring suppliers to maintain an ISO-9001 compliant quality system, with calibration under ISO-10012 or ANSI-Z540.3, or an acceptable alternative under MIL-I-45208 and MIL-STD-45662. All subcontractors must be vetted and their work supervised to ensure compliance, with Government inspection rights extending to source locations. Certification documentation for each shipment must be submitted via WAWF to Portsmouth Naval Shipyard for review and acceptance before any material can be shipped, with delivery scheduled to conclude within 365 days and early or incremental shipments permitted at no additional cost. The contract mandates zero-defect acceptance testing, 100% inspection of traceability marks and certification records, and compliance with Buy American and mercury-free stipulations. Waivers and deviations require formal approval through the ECDS system, and failure to meet any requirement results in rejection. The procurement is issued under emergency acquisition flexibilities, with prompt payment terms extended to 45 days, and is subject to strict configuration control, engineering change proposals, and documentation handling under Navy distribution directives.
Navsup Weapon Systems Support Mech

POSTED

7 days ago

DEADLINE

in 23 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334511
New
DIBBS
Small Business Subcontracting & Accelerated PaymentsSmall businesses are invited to subcontract under a Department of Defense opportunity managed by the Maritime Supply Chain, with accelerated payment terms available under FAR 52.232-40 to improve cash flow and financial agility. The contract is categorized under NAICS code 334511 and requires seamless integration into the prime contractor’s WAWF invoicing and compliance systems to ensure efficient financial processing and regulatory alignment. Subcontractors must be prepared to meet all system requirements for electronic submission and documentation to qualify for accelerated payments. The solicitation is open with a narrow response window, closing just three days after posting, and no set-aside designation is specified, meaning eligibility is based on the ability to perform under the stated terms rather than size or status-based preferences. Interested parties should act swiftly and ensure full technical and administrative readiness to interface with the prime’s automated systems.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 483111
New
DIBBS
Ocean Freight & U.S.-Flag Vessel TransportationThe contract requires the provision of ocean freight services using U.S.-flag vessels in full compliance with the Jones Act, ensuring that all transportation of supplies adheres to federal regulations governing maritime commerce. When U.S.-flag vessels are unavailable to meet required schedules or capacity needs, the contractor must prepare and submit waiver requests to secure authorization for alternative vessel arrangements. This subcontract is tied to the Department of Defense’s Maritime Supply Chain and is classified under NAICS code 483111, which pertains to deep sea, coastal, and Great Lakes water transportation. The opportunity was posted on July 20, 2026, with a strict response deadline of July 23, 2026, indicating a rapid procurement timeline. Performance of the contract may occur across unspecified locations, as no specific place of performance is designated, but the focus is clearly on ensuring reliable and compliant maritime logistics support for defense-related supply needs.
Deep Sea Freight Transportation

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract requires the identification, documentation, and proper labeling of hazardous materials in strict accordance with OSHA’s Hazard Communication Standard and Department of Defense regulations. Contractors must ensure all hazardous substances are accurately cataloged, clearly labeled with required hazard warnings, and accompanied by comprehensive safety data documentation to meet federal compliance standards. Work must be performed to support the Maritime Supply Chain under the Department of Defense, with a focus on maintaining operational safety and regulatory alignment across all handling and storage environments. The solicitation is structured as a subcontract with a narrow response window, closing just three days after posting on July 23, 2026, indicating an urgent need for qualified providers. The North American Industry Classification System code 541620 points to specialized environmental and scientific consulting services, emphasizing the technical expertise required for accurate hazardous material management. Performance is expected to support DoD logistics infrastructure, though specific geographic location details are not provided, suggesting the work may span multiple sites under the Maritime Supply Chain’s jurisdiction.
Environmental Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity & Covered Defense Information SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 controls to safeguard covered defense information and ensure compliance with DFARS cyber incident reporting requirements. It is structured as a subcontract under the Department of Defense, specifically managed by the Maritime Supply Chain agency, and falls under NAICS code 541512 for computer systems design services. The primary focus is on establishing a robust cybersecurity framework that aligns with federal standards to protect sensitive defense data and respond promptly to any cyber incidents as mandated by regulation. The solicitation is open for a very limited window, with responses due by July 23, 2026, and posted on July 20, 2026, indicating a tight turnaround for interested parties. The place of performance and point of contact details are not specified, suggesting flexibility in execution locations, but the requirement to adhere to NIST and DFARS standards is absolute. Compliance with these controls is not optional; failure to implement or maintain them could result in contract breach, loss of eligibility, or reporting obligations. Contractors must demonstrate proven experience in securing controlled unclassified information and maintaining continuous compliance throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334511
New
DIBBS
Electromechanical Toggle Switch SupplyThe contract calls for the supply of a Defense Department-compliant electromechanical toggle switch identified by NSN 5930005221425, requiring strict adherence to all military specifications for inspection, packaging, and hazardous material handling. The product must meet rigorous DoD standards to ensure reliability, safety, and compatibility with existing military systems, with no deviations permitted in manufacturing, testing, or documentation. All units must be fully traceable and prepared for immediate deployment in operational environments governed by federal defense protocols. The solicitation is posted as a subcontract under NAICS code 334511 and is managed by the Department of Defense through the Maritime Supply Chain organization. Interested parties must respond by July 23, 2026, at 5:00 PM, with no flexibility in deadline adherence. The contracting activity is conducted entirely through the DIBBS platform, and bidders are expected to comply with all procurement guidelines tied to federal subcontracting under defense contracts. While specific delivery locations and point of contact details are not provided, performance is expected to align with overarching DoD logistics and supply chain requirements.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541330
New
DIBBS
Technical Documentation and Reverse Engineering SupportThe contract seeks the development of comprehensive technical data packages for defense-related systems, including manufacturing drawings, process sheets, and shock test reports compliant with MIL-S-901 and DI-ENVR-80706 standards. The scope includes potential reverse engineering analysis to support documentation and manufacturing readiness, ensuring accurate reproduction or modification of existing components. All deliverables must meet stringent military specifications and be tailored for production use within defense supply chains. This is a small business set-aside subcontract under NAICS code 541330, administered by the Department of Defense through its Maritime Supply Chain division. The opportunity was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a rapidly timed procurement cycle. The work is expected to support critical defense infrastructure, requiring precise technical execution and adherence to government standards, though the specific place of performance and point of contact are not provided in the available data.
Engineering Services

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 488999
New
DIBBS
Hazardous and Radioactive Material Handling & TransportationThe contract is for the safe handling, labeling, and transportation of hazardous and radioactive materials, requiring strict adherence to Department of Transportation, Occupational Safety and Health Administration, and military standards. It includes responsibilities for FOB coordination and thorough vetting of carriers to ensure compliance and operational integrity throughout the supply chain. All activities must meet or exceed regulatory requirements for security, documentation, and employee safety, particularly when transporting sensitive or dangerous goods within defense-related operations. This is a total small business set-aside subcontract under the NAICS code 488999, issued by the Maritime Supply Chain division of the Department of Defense. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a compressed timeline for qualified small businesses to submit proposals. Performance location details are unspecified, suggesting flexibility based on operational needs, but all work must align with federal, military, and industry-specific protocols for hazardous material management. Participation is limited to small business concerns as defined under SBA regulations.
All Other Support Activities for Transportation

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
Supply of Filter Elements for Engine Fuel Pumps (NSN: 4330004718599)The contract is a total small business set-aside under the SBA program for the supply of filter elements with NSN 4330004718599, which must comply with military specifications for use in engine fuel pumps. Delivery is structured under future delivery orders to be issued by the Department of Defense through the Maritime Supply Chain, with shipments made FOB origin meaning the buyer assumes responsibility once goods leave the supplier’s facility. The item is classified under NAICS code 332996, indicating it involves other fabricated metal product manufacturing, and the solicitation is exclusively reserved for small businesses as defined by the Small Business Administration. The deadline to respond is set for July 23, 2026, with the solicitation posted on July 20, 2026, through the DIBBS platform, indicating the procurement is being managed under a subcontracting framework to support defense logistics requirements.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 322220
New
DIBBS
Packaging and Preservation of Sensitive/Military-Grade MaterialsThis contract requires the packaging and preservation of sensitive and military-grade materials in full compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring secure, standardized handling for defense applications. All items, particularly mercury-containing devices, must be enclosed in shockproof packaging to prevent damage during transport and storage, and must be properly marked with accurate barcoding systems as mandated by federal military specifications. The work must be performed by a small business as this is a Total Small Business Set-Aside under SBA guidelines, with the NAICS code 322220 indicating the primary industrial classification applies to paperboard container manufacturing. The solicitation is closed to responses after July 23, 2026, and the award will be managed under the Maritime Supply Chain division of the Department of Defense, with performance expected to support defense logistics requirements across unspecified locations.
Paper Bag and Coated and Treated Paper Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract entails the preparation, submission, and ongoing management of Safety Data Sheets for hazardous materials in full alignment with OSHA’s 29 CFR 1910.1200 regulations, ensuring all documentation meets federal safety and compliance standards. This includes continuous monitoring and implementation of regulatory updates, with responsibilities extending to the accurate flow-down of updated SDS requirements to all subcontractors involved in the supply chain. The work is structured to maintain consistent compliance across all tiers of operations, emphasizing timely communication and documentation integrity. This is a small business set-aside subcontract under NAICS code 541620, issued by the Department of Defense through the Maritime Supply Chain office, with a competitive bid window closing on July 23, 2026. The solicitation is open exclusively to certified small businesses, reflecting a federal commitment to fostering small business participation in critical safety compliance services. All activities are expected to be performed in support of defense-related logistics, requiring rigorous adherence to federal hazardous materials handling standards and proactive responsiveness to evolving regulatory requirements.
Environmental Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 483111
New
DIBBS
Transportation and Delivery Coordination via Sea FreightThe contract requires coordination of sea freight transportation to deliver valve seats to the USNS MT WHITNEY at FPO AE 09517-3310, with strict adherence to DLA procedures and a mandatory 5-day FOB destination delivery timeline. All logistics must be structured to meet military supply chain standards, ensuring timely and compliant movement of goods under the Department of Defense’s maritime supply chain oversight. The performance location is specified as a floating military postal address, indicating delivery to a vessel at sea or in a designated naval port, necessitating precise coordination with naval logistics teams. This is a subcontract under NAICS code 483111, which pertains to coastal and Great Lakes water transportation, and was posted on July 20, 2026, with responses due by July 31, 2026. The contracting activity falls under the Agency Name MARITIME SUPPLY CHAIN and the Department of Defense, requiring bidders to align with federal defense logistics protocols. The absence of solicitation number or point of contact suggests reliance on the DIBBS portal for detailed submission guidance and documentation, and all operations must be executed within the stringent timelines and regulatory framework governing military maritime deliveries.
Deep Sea Freight Transportation

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
Packaging, Labeling, and Hazard Communication ComplianceThe contract requires the provision of compliant packaging, labeling, and hazard communication documentation specifically for valve seats, ensuring full adherence to regulatory standards. This includes the preparation and delivery of Safety Data Sheets (SDS) and OSHA-compliant hazard labels that accurately convey chemical and physical risks associated with the product. The documentation must meet all federal requirements for workplace safety and transport regulations, with emphasis on clarity, accuracy, and alignment with current OSHA and GHS guidelines. This is a subcontract under the Department of Defense’s Maritime Supply Chain, with performance required at FPO, 09517-3310. The solicitation, identified by the NAICS code 541380 for other scientific and technical consulting services, was posted on July 20, 2026, and responses are due by July 31, 2026. All submitted materials must be thoroughly vetted for compliance before delivery, and failure to meet labeling or documentation standards could result in rejection or contract non-fulfillment. The work scope is strictly focused on hazard communication and packaging compliance, with no mention of manufacturing or supply of the valve seats themselves.
Testing Laboratories and Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details