This Solicitation opportunity from Department Of Defense was posted on May 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
CALIBRATING GAS MIX
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract specifies the procurement of a calibrated gas mix identified as a commercial off-the-shelf item, consisting of sulfur dioxide at 5 ppm in nitrogen, packaged in cylinders measuring approximately 5 inches by 14 inches, with each unit containing 58 liters. The item is classified as a Type I, Code M shelf-life item with a non-extendable shelf life of 24 months. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special markings for Type I shelf life and hazardous material handling in accordance with DOT regulations for domestic shipments and UN standards for exports. Hazard communication requirements mandate approved Safety Data Sheets and OSHA-compliant hazard warning labels, which must be reviewed by technical personnel and submitted to the DLA Aviation HMIRS office prior to contract award. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and all attributes not otherwise specified are treated as major. The unit of issue is each (EA), and the total quantity ordered is ten units with a delivery requirement of five days FOB destination. The shipment must be sent via traceable freight methods, excluding parcel post, to the designated delivery point at Fort Bliss, Texas, and labeled with the provided military freight and marking codes. The contract number is SPE4A6-26-T-46K0, with an NSN of 6830-01-609-4134, a purchase request of 7016602059, and a required delivery date of May 5, 2026.
General Info
Agency
NAICS
Place of Performance
21287 LIGHT INFANTRY AVENUE, FORT BLISS, TX, 79918-2527, USASet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
CALIBRATING GAS MIX
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
"SDS AND OSHA HAZARD WARNING/PRODUCT LABEL (HWL) ARE REQUIRED. THE SDS
AND HAZARD WARNING LABEL MUST BE REVIEWED AND APPROVED BY
CHEMISTS/TECHNICAL PERSONNEL BEFORE CONTRACT AWARD. THE APPROVED SDS AND
LABEL MUST THEN BE PLACED IN THE CONTRACT FILE AND A COPY FORWARDED TO
THE DLA AVIATION HMIRS OFFICE (VBA)."
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TRANSPORT INFORMATION AND CHEMICAL SYNONYMS:
D.O.T. SHIPPING INFORMATION: UN NUMBER UN 1956; PROPER SHIPPING NAME
COMPRESSED GASES, N.O.S.; HAZARD CLASS AND LABEL 2.2, NON-FLAMMABLE
COMPRESSED GAS 49 CFR 173.115; PACKAGING GROUP N/A.
SYNONYMS: MIXTURE; SULFUR DIOXIDE 5 PPM (0.00001% 0.99%) IN NITROGEN.
CYLINDER DIMENSIONS: ~5" X ~14".
UNIT OF ISSUE = EACH (EA), ONE EA CONTAINS 58 LITERS (2.0 CF).
SPE4A6-26-T-46K0
SECTION B
RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
HONEYWELL INTERNATIONAL INC 0B7T5 P/N 600-0053-000
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016602059 0001 EA 10.000
NSN/MATERIAL:6830016094134
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
BULK BREAK POINT:
W8001Z
0142 CS BN CO A COMPOSITE
1AD SUSTAINMENT BRIGADE SSA
21287 LIGHT INFANTRY AVENUE
FORT BLISS TX 79918-2527
US
SPE4A6-26-T-46K0
SECTION B
PR: 7016602059 PRLI: 0001 CONT’D
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8001Z
0142 CS BN CO A COMPOSITE
1AD SUSTAINMENT BRIGADE SSA
21287 LIGHT INFANTRY AVENUE
FORT BLISS TX 79918-2527
US
MARKFOR
W8001Z
0142 CS BN CO A COMPOSITE
1AD SUSTAINMENT BRIGADE SSA
21287 LIGHT INFANTRY AVENUE
FORT BLISS TX 79918-2527
US
M/F: (TCN) W8001Z61200445
RDD: N
PROJ: TP 1
SUPP ADD: W8001Z SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:05/05/2026
SPE4A6-26-T-46K0 NSN/Part Number: 6830-01-609-4134 Quantity: 10 EA Purchase Request: 7016602059QTY: 10 Delivery: 5 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS