Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CALIBRATOR, TEMPERAT

Active
SPE4A5-26-T-336JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one Fluke Electronics Corp Calibrator, Temperature, model P/N 9142-A-156, identified by NSN 6685-01-718-0114, with a requirement for delivery within 20 days of contract award. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special marking codes. Sampling and inspection must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; inspection and acceptance occur at the destination point. Delivery is FOB origin, and shipment must be transported via traceable means, not parcel post, to the specified delivery address aboard the USNS HECTOR A CAFFERATA in San Diego, California. The contract prohibits any variance in quantity, with a firm requirement of exactly one unit priced at the quoted amount. The contract reference is SPE4A5-26-T-336J, with a required delivery date of August 3, 2026, and the solicitation was issued on August 9, 2026, with responses due by August 17, 2026. The item falls under NAICS code 334512, and the point of contact is Rosa Tyiska of the Department of Defense’s ASC Supplier Oper OEM Division.

General Info

One Fluke 9142-A-156 calibrator to be delivered FOB origin to USNS HECTOR A CAFFERATA by August 3, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

334512 - Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance UseView NAICS

Place of Performance

8511 KERNS STREET DOCK 5, SAN DIEGO, CA, 92154, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-336J for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
ROSA TYISKA
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CALIBRATOR,TEMPERAT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CALIBRATOR,TEMPERAT
FLUKE ELECTRONICS CORP 4U744 P/N 9142-A-156
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017744400 0001 EA 1.000
NSN/MATERIAL:6685017180114
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
SPE4A5-26-T-336J
SECTION B
PR: 7017744400 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N2990N
USNS HECTOR A CAFFERATA (ESB-8)
1333 ISAAC HULL AVE
8511 KERNS STREET DOCK 5
SAN DIEGO CA 92154
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N2990N
USNS HECTOR A CAFFERATA ESB-8
8511 KERNS STREET
8511 KERNS STREET DOCK 5
SAN DIEGO CA 92154
US
M/F: (TCN) N2990N6210S051
RDD: 224
PROJ: HJ5 TP 3
SUPP ADD: YNENGR SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 15
DIC: A4A DIST: 9B ADV: FC: E2
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE4A5-26-T-336J NSN/Part Number: 6685-01-718-0114 Quantity: 1 EA Purchase Request: 7017744400QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334512
New
DIBBS
TRANSMITTER, TEMPERA
Solicitation # SPE4A5-26-T-336Z
The contract pertains to the procurement of one unit of a Transmitter, Tempera, identified by NSN 6685-01-681-1442 and manufacturer part number 4213210 from Deutz Corporation, classified as a commercial off the shelf item. Delivery is required within five days of award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the origin, and the item is designated as a critical application item, subject to tailored higher-level quality requirements and specific documentation protocols for source approval. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required; palletization follows DLA packaging standards, and the unit must be shipped by the fastest traceable means, excluding parcel post. The delivery destination is the Logistics Supply Warehouse at Fort Hood, Texas, with identical shipping and mark-for addresses. The contract is issued under solicitation SPE4A5-26-T-336Z with a required delivery date of August 3, 2026, and references compliance with DLA’s Master List of Technical and Quality Requirements, incorporating specific R and I numbers that define performance and quality criteria. The unit of issue is each, and the price is listed but not detailed in the provided data. Technical and quality specifications are governed by the DLA Master List revision in effect on the solicitation issue date, and all documentation and testing must align with RT001 and RQ001 requirements, including the use of calibrated measuring and test equipment. The point of contact for the solicitation is Jamie Bonda of the ASC Supplier Operations OEM Division, and the contract falls under NAICS code 334512 for electronic component and product manufacturing. Government-identified controls and internal tracking codes are included for administrative and logistics purposes only.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-14NX
This contract specifies the procurement of a dial pressure gauge identified by NSN 6685010908880 and piece part number SG4NN60PWCANA, with a requirement for 38 units to be delivered within 265 days FOB origin. The item is classified as a critical application and must comply with MIL-G-18997E and associated technical data package revisions, with first article testing required from the contractor. Packaging must conform to MIL-STD-2073-1E and DLA-specific requirements including special marking code 05 for delicate instruments and MIL-STD-129 for labeling, with no tolerance for quantity variance. Inspection and acceptance occur at origin, and all items must be packaged and palletized per DLA guidelines with unit packaging details including E5 containers and no cushioning material. The contract incorporates a comprehensive set of DLA technical and quality requirements identified by R and I numbers, including zero-defect sampling under MIL-STD-1916 or equivalent, with critical, major, and minor attributes assigned strict verification levels or AQLs. Mercury and mercury-containing compounds are strictly prohibited except in specified exempted applications such as functional batteries, fluorescent lights, weapon systems, or naval-referenced reagents, and any exempted mercury-containing portable items must include a secondary containment and be shockproof per NAVSEA 5100-003D. Measuring and test equipment must be calibrated and compliant, and government identification must be removed from non-accepted supplies. The solicitation is a total small business set-aside under NAICS 334512, with performance managed by the Department of Defense’s ASC Commodities Division and point of contact John Schaefer.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
SWITCH, THERMOSTATIC
Solicitation # SPE7M8-26-T-5918
The contract is for the procurement of 29 thermostatic switches with NSN 5930-00-200-9325 and part number M24236/15-450, governed by military specifications MIL-PRF-24236E and MIL-PRF-24236/15L, with a required delivery in 165 days under FOB origin terms. The item is classified as a critical application and is listed on a Qualified Products List, mandating compliance with all referenced technical and quality standards from the DLA Master List, which supersedes commercial packaging standards like ASTM D3951. Packaging must follow MIL-STD-129 labeling and RP001 DLA packaging requirements, with hazardous material handling governed by FED-STD-313 and TQ requirement IP025 if applicable. Use of ozone-depleting substances is strictly prohibited unless written approval from the contracting officer is obtained, and this prohibition overrides any conflicting specification but does not reduce product performance expectations. Cybersecurity requirements include CMMC Level 2 self-assessment compliance and adherence to covered defense information protocols. The item must be delivered to the specified DLA warehouse in Tracy, CA, with no variance allowed in quantity. The contract is issued under solicitation SPE7M8-26-T-5918, with a response deadline in August 2026 and a required ship date of February 2, 2027, and original delivery due by January 26, 2029. All deliveries must align with DLA’s authorized unit of issue and transportation guidelines, and contact for inquiries is Dondiego Boler at the Department of Defense’s Electrical Devices Division.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334512
New
Federal
Assorted Mass Flow Controllers
Solicitation # RP481134
Brookhaven Science Associates (BSA), operating under the U.S. Department of Energy, is soliciting quotations for assorted mass flow controllers under solicitation number RP481134, with a response deadline of August 20, 2026. The required items include specific models of EL-FLOW Prestige FG-201CS mass flow controllers in various gas configurations—helium, nitrogen, and carbon dioxide—as well as auxiliary components like RS485 accessory kits and cable T-part shut-off valves. Offerors must provide a detailed quotation including applicable lead times, itemized pricing with all available discounts applied to secure the best possible rate for BSA, and must comply with strict pricing requirements: all costs—including freight, tariffs, packaging, handling, and incidental charges—must be embedded within the unit price, as the resulting firm fixed price purchase order will not contain separate line items for additional fees. For items under 150 lbs, international shipping may be facilitated via BSA’s FedEx account, with weight disclosed; for heavier items or when all-inclusive pricing is unattainable, Brookhaven National Laboratory must be named as the Importer of Record under DAP Incoterms, using BSA’s designated freight forwarder. Quotations must include the ECCN and HTS code for each item, the country of origin, the Unique Entity Identifier (UEI), and a published price list if available. Award will follow a lowest price technically acceptable (LPTA) approach, prioritizing the lowest evaluated price from responsive and responsible offerors who meet all technical and administrative criteria. Pricing must remain valid for at least 60 days post-deadline, and submissions are to be made via an electronic portal; late proposals will be considered only if determined to be in BSA’s best interest. The contract enforces strict compliance with numerous Federal Acquisition Regulation (FAR) clauses, including restrictions on gratuities, contingent fees, and subcontractor sales to the government, as well as requirements for employment eligibility verification, whistleblower protections, and cyber security adherence under NIST SP 800-171. Additional obligations include compliance with export controls, prohibitions on equipment from certain foreign entities like Huawei and Kaspersky, adherence to the Framework for Nucleic Acid Synthesis Screening, and mandatory reporting of suspect or counterfeit items. All deliveries are to be made to Brookhaven National Laboratory in Upton, New York, with acceptance occurring at the destination, and payment terms are
Brookhaven National Labor -Doe Contractor

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 334512
New
Federal
Ruggedized RF and EW Detection/Tracking Subsystem Supply
W6QK Acc- Dta

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 334512
New
Federal
59--SWITCH,THERMOSTATIC
Solicitation # SPE7M526T380S
The contract solicitation seeks the procurement of 19 thermostatic switches with NSN 5930015457596, to be delivered to the DLA Distribution Depot Hill no later than 168 days after award. The only approved source for this item is vendor 82647 with part number 21545-3-28-8. This is a full and open competition under an RFQ, with no hard copies available; all submissions must be made electronically through the online solicitation portal. No specifications, plans, or drawings are provided, and all responsible sources are invited to submit quotes as long as they are received before the deadline. The solicitation, numbered SPE7M526T380S, was posted on August 6, 2026, with responses due by August 17, 2026. The contracting activity falls under the Department of Defense, specifically DLA Land and Maritime, with the office located in Columbus, Ohio. Technical and procedural inquiries must be directed via email to the designated buyer listed in the solicitation's block 5 or through the provided DIBBS website link.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
Federal
59--SWITCH,THERMOSTATIC
Solicitation # SPE7M826T5751
The contract involves the procurement of 22 units of NSN 5930010934994 SWITCH THERMOSTATIC, to be delivered to W1A8 DLA DISTRIBUTION within 207 days after award. Only approved sources, specifically 09049 607T475S and 830Q4 W123292, are eligible to respond. The solicitation is issued as an RFQ under number SPE7M826T5751 and is exclusively available online via the provided SAM.gov link; no hard copies will be distributed, and no specifications, plans, or drawings are provided. All responsible suppliers may submit electronic quotes, provided they are received by the deadline of August 17, 2026. The procurement falls under NAICS code 334512 and is managed by the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. Inquiries must be directed via email to DibbsBSM@dla.mil, with additional guidance available through the solicitation’s Additional Information link or by searching the solicitation number on the DIBBS website.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
Federal
59--SWITCH,THERMOSTATIC
Solicitation # SPE7M126U5067
The contract seeks the procurement of 54 thermostatic switches with NSN 5930006151177 under a solicitation that may lead to an automated indefinite delivery contract with a one-year term or until aggregate orders reach $350,000, whichever comes first. The guaranteed minimum order quantity is eight units, with an estimated two orders per year. Items are to be delivered to multiple DLA depots across CONUS and OCONUS regions via consolidated and containerized shipping points. Only approved sources—0YFP0 975-0116-001, 25583 975-0116-001, and 25583 G1-1Q—are eligible to respond. The solicitation is issued as an RFQ with no hard copies available; all submissions must be made electronically through the provided SAM.gov link. Technical specifications, plans, or drawings are not provided, and any responsible source may submit a quote if received by the deadline. The solicitation number is SPE7M126U5067, posted on August 6, 2026, with responses due by August 21, 2026, under NAICS code 334512, managed by the DLA Land and Maritime office in Columbus, Ohio. Questions must be directed via email to the designated point of contact.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 334512
New
Federal
12--DETECTOR,RADIO FREQUEN
Solicitation # SPE7M126T261V
The contract seeks the procurement of 20 units of the detector, radio frequency, identified by NSN 1285012475851, to be delivered to DLA Distribution facility W1A8 within 168 days after award. This is a source-controlled item requiring strict compliance with drawing specification DX1400-002, and only approved sources are eligible to supply. The solicitation, issued as an RFQ under number SPE7M126T261V, is accessible exclusively online through the provided SAM.gov link; no hard copies are available. All quotes must be submitted electronically and received by the deadline of August 17, 2026, to be considered. The item falls under NAICS code 334512 and is managed by the Department of Defense through DLA Land and Maritime in Columbus, Ohio. Responsible suppliers are encouraged to respond, but adherence to the specified drawing and electronic submission requirements is mandatory. Questions must be directed via email to the designated point of contact listed in the solicitation document.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
Manual Station Unit ManufacturingThe contract requires the full manufacturing of 18 manual station units to strict government specifications, encompassing every phase from initial design through final delivery. This includes the integration of sensors, control systems, and structural components, ensuring all units meet operational requirements for performance, durability, and safety. The work must be completed in accordance with defined technical standards and undergo rigorous testing to verify compliance before shipment. The solicitation, issued by the Department of Defense through DLA Dist San Joaquin, is a subcontract under NAICS code 334512 and specifies Tracy, California with zip code 95304-5000 as the place of performance. Responses are due by August 17, 2026, with the opportunity posted on August 5, 2026. All units must be delivered to the designated location, and the contractor is responsible for ensuring the entire process—from sourcing materials to final quality assurance—adheres to federal mandates without deviation.
DLA DIST SAN JOAQUIN

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, PRESSUR
Solicitation # SPE4A5-26-T-334K
The contract pertains to the procurement of a pressure transmitter with NSN 6685-01-315-8618 and part number A859-221-20-K36 from DYNISCO INSTRUMENTS LLC, for a quantity of five units at a unit price of $5.00, totaling $25.00. Delivery is required within 148 days from the contract date, with shipment FOB origin and inspection and acceptance occurring at the destination. The item is not subject to Unit Unique Identification per the Service customer’s request, and compliance with DFARS 252.211-7003(c)(1)(i) is confirmed. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes not otherwise defined are treated as major. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must comply with DLA Packaging Requirements, MIL-STD-129 for marking and labeling, and Fed-Std-313 for hazardous material handling, with non-hazardous items packaged commercially per ASTM D3951 only if not overridden by DLA requirements. Palletization must follow RP001 specifications. The delivery address is the DLA Distribution facility in New Cumberland, PA, and the required ship date is March 22, 2026, with the original delivery deadline of October 3, 2026. The solicitation is a Total Small Business Set-Aside under NAICS code 334512, issued by the Department of Defense’s ASC Supplier Operations OEM Division, with Dominic Harris as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 334512
New
DIBBS
CONTROL, ALARM
Solicitation # SPE4A6-26-T-12ST
The contract pertains to the procurement of four units of a CONTROL, ALARM system under NSN 6350015078243, with a required delivery within 170 days after receipt of order, FOB origin, and final delivery to the Defense Logistics Agency warehouse in Tracy, California. The item is designated as a critical application component, with specific part numbers tied to Tyco Fire Products LP, Northrop Grumman Systems Corporation, and DEIF A/S, and must comply with stringent physical identification and bare item marking requirements per RQ017. Packaging must adhere to MIL-STD-2073-1E with packaging code U, cold/dry preservation method, and unit containers designated as E5; palletization must follow DLA’s RP001 packaging requirements, and all items must be marked in accordance with MIL-STD-129 using standard data matrix and linear bar codes, with no special marking applicable. Inspection and acceptance occur at the destination, with sampling methods governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise specified, and critical, major, and minor attributes must be verified at AQL levels of 0.1, 1.0, and 4.0 respectively. Quality and technical requirements are sourced from the DLA Master List of Technical and Quality Requirements, incorporating configuration control through engineering change proposals and variance requests. The contract mandates compliance with multiple federal regulations including hazard communication, safeguarding of defense information, cybersecurity reporting, prohibition of hexavalent chromium and covered telecommunications equipment, and employment eligibility verification. All invoicing must be processed electronically through Wide Area WorkFlow, and contractors are subject to clauses governing cyber incident reporting, trafficking in persons, sustainable products, and accelerated payments to small business subcontractors. The solicitation allows for automated award and likely operates under a Lowest Price Technically Acceptable evaluation model, with no price specified in the CLIN table but estimated at approximately $5,500 based on historical data. Small business status, socioeconomic certifications, and accurate SAM registration are mandatory, though no specific set-aside is declared. Offerors must submit Safety Data Sheets for any hazardous materials and ensure all representations and certifications in Section K are properly completed, though no offeror responses are provided in the solicitation document.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
JACKING DEVICE, GEAR
Solicitation # SPE4A5-26-T-336P
The contract pertains to the procurement of a jacking device, gear, part number 785E524G01, manufactured by General Electric Company, for use on a gear assembly SPD DECR. The item is identified by NSN 2010010328949 and is solicited under contract SPE4A5-26-T-336P with a required quantity of two units, delivered in AY units. Delivery is mandatory within 166 days from the contract award, with FOB origin terms, inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation methods 20 and packaging material code 01, with wrapping, cushioning, and packing standards as specified. Marking must follow MIL-STD-129 with no special marking required. The destination for delivery is the DLA Distribution DDSP New Cumberland facility in Pennsylvania, and transportation logistics are governed by DLAD procedural notes C19 and C20. The original required delivery date is November 16, 2027, though a need ship date is set for January 31, 2027. The contract adheres to all DLA packaging and technical requirements referenced in the DLA Master List, and all provisions for cybersecurity maturity model certification level 2 self-assessment have been incorporated. Mercury or mercury-containing compounds are strictly prohibited in the product, preservation, packaging, or marking, except for specific functional exemptions outlined in NAVSEA 5100-003D. The item must be delivered with zero quantity variance, and the supplier must ensure compliance with all applicable defense standards and regulations without exception.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
FIXTURE, ENGINE MAIN
Solicitation # SPE4A5-26-T-337N
This solicitation, SPE4A5-26-T-337N, is a total small business set-aside for a fixture, engine main, with a quantity of four units and a delivery requirement of 166 days after contract award. Offerors must submit quotation ranges due to fluctuating demand and frequent quantity adjustments on open purchase requests, as this allows the buyer to consolidate or reduce orders without administrative delays or resolicitation. Fast Pay is not applicable, and quotes submitted after the closing date must include a “No Bid” entry on DIBBS with an anticipated quote date or reason for non-submission to avoid assumptions of non-procurability. All offerors must certify they will not supply covered telecommunications equipment or services restricted under FAR 52.204-24 and DFARS 252.204-7016. Domestic sourcing restrictions under the Berry Amendment and Buy American Act apply, with the Berry threshold lowered to $150,000; non-domestic materials require explicit disclosure. Small business joint ventures must submit required representations for eligibility under specific categories including service-disabled veteran-owned, women-owned, and economically disadvantaged women-owned small businesses. Vendors must register via the new DLA Account Management & Provisioning System (AMPS) within two months to retain access to the Vendor Shipment Module and continue shipping to DLA; users of VSM WebServices must update their internal schema. Additive manufacturing is prohibited unless specifically approved by the contracting officer, and any proposed AM-produced items will be disqualified from evaluation or award. The solicitation is managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Steven Lewis as the primary point of contact.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 000000
New
DIBBS
INCLINOMETER, VEHICULAR
Solicitation # SPE4A5-26-T-337C
The contract specifies the procurement of 18 units of a vehicular inclinometer with NSN 6695-01-738-6848 and part number P/N 1017W1SPL3-9/10A from RIEKER INSTRUMENT CO., INC. under solicitation SPE4A5-26-T-337C. Delivery is required FOB origin within 166 days, with a ship date of January 31, 2027, and an original required delivery date of May 16, 2027. Quantity is strictly fixed at 18 units with zero variance allowed. Inspection and acceptance both occur at origin, governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede all other standards. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise noted; unspecified attributes are treated as major. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA packaging requirements. The item must be identified per RQ017 and all non-accepted supplies must have government identification removed per RQ011. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, and transportation details are governed by DLAD Proc Note C19 for shipment and C20 for first destination. The unit of issue is each (EA), and the contract is subject to the revision of technical standards in effect on the solicitation issue date.

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
SHROUD SEGMENT, TURB
Solicitation # SPE4A5-26-T-336T
The contract pertains to the procurement of a SHROUD SEGMENT, TURB with NSN 2840-01-689-4843 and part number 5200T09G09, under solicitation SPE4A5-26-T-336T. A total of 73 units are required at a unit price of $73.00, with full payment due upon delivery. The item must be delivered FOB origin within 166 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the point of origin, and all items must comply with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containment, with marking adhering to MIL-STD-129 and no special marking codes applied. Packaging and palletization must conform to DLA’s procurement requirements, and delivery is directed to DLA Distribution Cherry Point in North Carolina. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with revisions controlled by the solicitation or award date depending on acquisition size. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stated, and attributes must be verified at specified acceptance quality levels. The item is subject to removal of government identification if not accepted, and physical identification must be marked per RQ017. The unit of issue is each (EA), and transportation logistics follow DLA procedural notes C19 and C20. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, and the original required delivery date is October 25, 2027, with a need ship date of January 31, 2027. The contracting office is under the Department of Defense, with Kirstie Ragsdale listed as the primary point of contact.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335314
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE4A5-26-T-337E
The contract pertains to the procurement of a solenoid, electrical, identified by NSN 5945-00-150-3034 and part number 37073 from Hamilton Sundstrand Corporation, with a quantity of six units. The item is classified as a commercial item and is designated as a critical application item with no shelf life requirement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance is mandatory. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with individual unit packing marked in accordance with IPC/JEDEC J-STD-609 to indicate lead content and other attributes, following strict placement guidelines. Marking of shipments must comply with MIL-STD-129, including the special marking code ZZ for additional requirements, and palletization must follow DLA standards. Sampling requirements mandate zero non-conformances using MIL-STD-1916 or an equivalent zero-based plan, with acceptance levels set for critical, major, and minor attributes as specified. The unit of issue is EA, with a fixed quantity and zero variance permitted. Delivery is FOB origin with inspection and acceptance occurring at destination, within 399 days of contract award. The item requires no Unique Identification, per DFARS 252.211-7003(c)(1)(i). The delivery destination is DLA Distribution Cherry Point in North Carolina, with a required ship date of April 5, 2026, and an original delivery deadline of August 8, 2027. Transportation and freight instructions are governed by specific DLA procedural notes, and all documentation must align with the approved solicitation SPE4A5-26-T-337E.
Relay and Industrial Control Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PANEL, INTERFACE DEV
Solicitation # SPE4A5-26-T-336K
This contract pertains to the procurement of a PANEL, INTERFACE DEV, identified by NSN 4920-01-659-7555 and part number 8M0086566, with a quantity of five units to be delivered under solicitation SPE4A5-26-T-336K. The item is classified as a commercial off-the-shelf (COTS) product and must comply with DLA’s packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances mandatory unless otherwise specified. Critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. The item must be delivered FOB origin within 20 days of contract award, with inspection and acceptance occurring at the destination. Delivery is to be made via the fastest traceable means, excluding parcel post, to the specified freight address in Baltimore, MD, under a fixed price of $5.00 per unit totaling $25.00. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, and the supplier must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Physical identification and bare item marking are required per RQ017, and government identification must be removed from non-accepted supplies per RQ011. The original required delivery date is August 3, 2026, and the contract is subject to strict zero variance in quantity.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
DIBBS
INSTALLER, SEAL
Solicitation # SPE4A5-26-T-337S
The contract is for the supply of an installer seal with NSN 5120011507031 and part number 7070077311041, under solicitation SPE4A5-26-T-337S, with a requirement for seven units to be delivered within 20 days FOB origin. The item is designated as a critical application item and must comply with technical and quality requirements referenced from the DLA Master List, including ISO 9001:2015 for quality management and MIL-STD-2073-1E for packaging. Packaging specifications require adherence to MIL-STD-129 for marking, with no special marking codes, and palletization must follow DLA packaging guidelines. Sampling for acceptance follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. No Item Unique Identification is required per DFARS 252.211-7003(c)(1)(i). The delivery is to be made to the Commanding Officer, INS TUNIR, in Ghatskopar West, Mumbai, India, with the required delivery date set for August 13, 2026. Pricing is fixed at $7.00 per unit for a total of $49.00, with zero variance allowed in quantity. Inspection and acceptance occur at origin, and transportation details reference DLAD procedural notes C19 and C20. The contract mandates use of the DoD authorized unit of issue and specifies the purchase request number 7017810544. Government-specific identifiers include DODIC A01, distribution code F9B, and project code TP 2. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with Sean Moore as the primary point of contact.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
RETAINER, LANDING GE
Solicitation # SPE4A5-26-T-337W
The contract pertains to the procurement of a retainer for landing gear, identified by NSN 1630-01-044-6825 and part number 209-050-114-7, with a quantity of one unit. Manufacturing must be performed using a metal casting process, requiring specific tooling, and suppliers are directed to contact designated DLA assistance teams for sourcing guidance related to tooling and materials. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item must comply with stringent packaging standards per MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances mandated unless otherwise specified, and attributes are classified with defined verification levels and AQLs. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all supplies must have government identification removed if not accepted. Delivery is FOB origin, with a 20-day lead time to meet the original required delivery date of August 13, 2026, and the final destination is the Taiwan Army's Zuoying Ammunition Sub-depot in Kaohsiung. Packaging, shipping, and freight logistics adhere to DLA-specific procedures, with the unit of issue as a single EA and no quantity variance permitted. The contract is issued under solicitation SPE4A5-26-T-337W by the Department of Defense under NAICS code 336413.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 326130
New
DIBBS
PLASTIC SHEET, ADHES
Solicitation # SPE4A5-26-T-336H
The contract specifies the procurement of adhesive-coated plastic sheeting identified by NSN 9330-01-581-2003, with a total quantity of three rolling units, each equal to 60 feet, for delivery within 20 days of award. The item is classified as a commercial item and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RQ017 for physical identification and marking, RC001 for documentation during source approval, and RQ001 for tailored quality requirements applicable to both manufacturers and non-manufacturers. Packaging must adhere to DLA standards, and all materials require shelf life code H, meaning they must be stored at 70 degrees Fahrenheit with no more than 50 percent relative humidity and have a 12-month shelf life. Inspection and acceptance occur at the origin, and government identification must be removed from any non-accepted supplies. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Alternative offerors must submit a complete data package covering both the approved and alternate parts, as no data is currently available. The solicitation number is SPE4A5-26-T-336H, posted on August 9, 2026, with responses due by August 17, 2026, and performance is directed to Elizabeth City, North Carolina, under the U.S. Department of Defense, ASC Supplier Operations OEM Division.
Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE4A5-26-T-336S
The contract is for the supply of 145 units of an O-RING with NSN 5331016997328 and part number 68-1452 under solicitation SPE4A5-26-T-336S, issued by the Department of Defense through the ASC Supplier Oper OEM Division. The item must be delivered FOB origin within 122 days of contract award, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1 using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, as the item falls under Federal Supply Classifications 5330/5331. All packaging, marking, and preservation must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 20-20 prohibiting bending. Mercury and mercury compounds are strictly prohibited in any preservation or packaging materials. Palletization and packaging follow DLA’s RP001 requirements, and transportation instructions are governed by DLAD proc notes C19 and C20. The delivery destination is Hill AFB, Utah, with a required ship date of December 18, 2026, and an original delivery deadline of June 8, 2027. Technical and quality standards referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on solicitation or award date as applicable. Unit of issue is each (EA) at a unit price of $145.00, totaling $21,025.00.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BAR ASSEMBLY, STEERI
Solicitation # SPE4A5-26-T-337T
The contract pertains to the procurement of a Bar Assembly, Steering, identified by NSN 4920-01-156-0944 and part number 70700-77112-041, with a required quantity of six units to be delivered within 20 days from the contract award. The item must comply with stringent DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, packaging materials, and marking requirements in accordance with MIL-STD-129, with no special marking designated. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, assigning verification levels of VII, IV, and II for critical, major, and minor attributes respectively, with zero non-conformances required unless otherwise stated. The product is subject to strict configuration change management and requires a formal Engineering Change Proposal or variance request for any deviations. Technical data is proprietary and insufficient for competitive sourcing, with suggested suppliers including Grain Valley Tool & Mfg. Co. and EDR Industries Inc., both holding the same part number. The item must adhere to cybersecurity requirements under CMMC Level 2 self-assessment, and no mercury or mercury compounds are permitted in packaging or preservation. The delivery is FOB origin, with inspection and acceptance occurring at origin, and the end destination is the Commanding Officer, INS TUNIR in Mumbai, India. The sole point of contact for the solicitation is Hien-Van Trinh, and the contract was issued under solicitation number SPE4A5-26-T-337T with a response deadline of August 17, 2026, and an original required delivery date of August 13, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, GROOVED, HEADLESS
Solicitation # SPE4A5-26-T-337J
This contract specifies the procurement of 72 headless, grooved pins with part number 204-001-766-001 and NSN 5315-00-077-2130, sourced from Bell Textron Inc, under solicitation SPE4A5-26-T-337J. The items must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively, or equivalent AQLs of 0.1, 1.0, and 4.0. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and manufacturer selection of attribute or variable inspection is permitted. The pins are designated as a critical application item and require strict adherence to packaging standards, including ASTM D3951 and mandatory compliance with MIL-STD-129 for marking and labeling, while palletization follows DLA Packaging Requirements. Unit of issue is each, with no variance allowed in quantity. Delivery is FOB origin, with inspection and acceptance occurring at destination, and must be completed within 166 days from the contract date, with an original required delivery date of August 20, 2028, and a need ship date of January 31, 2027. Packaging must be labeled with the specified QUP of 001 and shipped to DLA Distribution Cherry Point, North Carolina, in accordance with freight and transportation procedures C19 and C20. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies as per applicable directives.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details