Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CAMSHAFT, ACTUATING, BRA

Active
SPE7L1-26-T-882WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a right-hand camshaft actuating brake shoe under solicitation SPE7L1-26-T-882W, with a total quantity of two units to be delivered within ten days of order placement. The item is identified by NSN 2530-01-282-5191 and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required in inspection lots unless otherwise stated. Critical attributes are verified at level VII with an AQL of 0.1, major at IV with 1.0, and minor at II with 4.0. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved prior to use. Packaging must conform to DLA’s RP001 requirements, MIL-STD-129 labeling, and ASTM D3951 for non-hazardous materials, with hazardous items packaged per FED-STD-313 and TQ requirement IP025. Delivery is FOB origin, with inspection and acceptance occurring at the manufacturer’s facility. The shipment destination is identified as BLDG 2371 in Kaiserslautern, Germany, and transportation follows DLAD Proc Note C19 and C20. The contract mandates full and open competition, with no set-aside provisions, and requires strict compliance with all referenced drawings, including revision dates from 2022 and earlier.

General Info

Procure two camshaft brake shoes, NSN 2530-01-282-5191, deliver in ten days, FOB origin, comply with MIL-STD and DLA specs.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336340 - Motor Vehicle Brake System ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-882W.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAMSHAFT,ACTUATING,BRAKE SHOE
CAMSHAFT, ACTUATING, BRAKE SHOE. (RIGHTHAND).
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLY
DETAILED DRAWING (ONE ITEM)
QUALITY ASSURANCE PROVISION
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 12354104 REVISION NR DTD PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 19207 12354104 REVISION NR DTD 05/13/1987 PART PIECE NUMBER:
SPE7L1-26-T-882W
SECTION B
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 12360349 REVISION NR DTD PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 12354101 REVISION NR DTD 04/05/2022 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017644032 0001 EA 2.000
NSN/MATERIAL:2530012825191
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
WK4GBW
W6FU CLII,IIIP, IV, VII SSA
SSA CLII III IV VII IX BLDG 2371
LUDWIGSHAFENERSTRASSE 31
KAISERSLAUTERN 67657
DE
RDD 555 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
SPE7L1-26-T-882W
SECTION B
PR: 7017644032 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
WK4GBW
W6FU CLII,IIIP, IV, VII SSA
SSA CLII III IV VII IX BLDG 2371
LUDWIGSHAFENERSTRASSE 31
KAISERSLAUTERN 67657
DE
MARKFOR
WK4GBW
W6FU CLII,IIIP, IV, VII SSA
SSA CLII III IV VII IX BLDG 2371
LUDWIGSHAFENERSTRASSE 31
KAISERSLAUTERN 67657
DE
M/F: (TCN) WK4GBW62020124
RDD: 555
PROJ: 9GU TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/24/2026
SPE7L1-26-T-882W NSN/Part Number: 2530-01-282-5191 Quantity: 2 EA Purchase Request: 7017644032QTY: 2 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336340
New
DIBBS
PARTS KIT, AIR-HYDRAThe contract is for a Parts Kit, Hydraulic Brake Slave Cylinder with NSN 2530-00-204-9906, quantity of 33 units, under Purchase Request 7017385501, with delivery required within 185 days after award. The solicitation number is SPE7L1-26-Q-1381, issued on July 28, 2026, with responses due by August 4, 2026. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent quality controls including tailored higher-level contract quality requirements, configuration change management via engineering change proposals and variance requests, and inspection and acceptance at origin. Export control regulations under ITAR or EAR apply to associated technical data, restricting its disclosure to foreign persons regardless of location, and compliance with DFARS 252.225-7048 is mandatory. Access to controlled data is limited to contractors approved by DLA who hold a valid US/Canada Joint Certification Program credential, have completed mandated training, and have passed the DLA Export-Controlled Technical Data Questionnaire. The place of performance is Tracy, California, with the contracting office under the Department of Defense’s Land Supply Chain, and the primary point of contact is Adam Howell.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336340
New
DIBBS
COVER, BRAKE, STEERINThe contract pertains to the procurement of brake and steering covers identified by NSN 2530-01-124-5454 and part number 301055, with a quantity of 2,056 units to be delivered in single units. Delivery is required within 67 days under FOB origin terms, with no tolerance variance in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit and intermediate container specifications, and a U pack code, while marking follows MIL-STD-129 with no special marking required, and palletization adheres to DLA packaging standards. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20. The original required delivery date is May 13, 2026, with a needed ship date of April 7, 2026. Technical and quality requirements referenced are drawn from the DLA Master List of Technical and Quality Requirements, which governs compliance for both simplified and large acquisitions based on solicitation and amendment dates. The contract falls under solicitation SPE7L3-26-T-135L, classified under NAICS code 336340, and is managed by the Department of Defense’s Land Supplier Operations Vehicle Support office, with primary contact McKenzie Biniker.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336340
New
DIBBS
BRAKE DRUMThe contract pertains to the procurement of 46 brake drums, identified by NSN 2530-00-658-4086, manufactured via a forging process requiring specialized tooling. The item must be produced using steel 8740 or 4140 per ASTM A322, heat-treated according to Drawing 7708076, and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major unless otherwise directed. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. The requirement is governed by DFARS 252.225-7048. Cybersecurity Maturity Model Certification (CMMC) Level 2 compliance is mandatory, and the contract incorporates DLA packaging standards. The solicitation was issued on July 27, 2026, with responses due by August 7, 2026, and delivery is required within 301 days of award. The point of contact is Matthew Curry of the Department of Defense, Land Supplier Operations Vehicle Support, with performance located at New Cumberland, Pennsylvania.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336340
New
DIBBS
Vehicular Fender Supply and DeliveryThe contract outlines the supply and delivery of up to 55 military-spec vehicular fenders, with a guaranteed minimum of 8 units, identified by NSN 2510014793029, to be shipped to DLA DIRECT locations within the continental United States on an FOB Origin basis. The requirement is part of a subcontract under NAICS code 336340, which pertains to other motor vehicle parts manufacturing, and is managed by the Land Supply Chain organization within the Department of Defense. Performance is expected to begin immediately after award, with all deliveries required to meet military specifications and be completed in accordance with DLA logistics standards. The solicitation was posted on July 26, 2026, and responses must be submitted by August 10, 2026, with no set-aside provisions in place for small or disadvantaged businesses. All contractual obligations, including quality assurance, packaging, and documentation, must align with federal and defense regulations applicable to military-grade vehicle components.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 336340
New
DIBBS
Brake Lining Kit SupplyThe contract calls for the manufacture and supply of asbestos-free brake lining kits specifically designed for Crane Carrier vehicles, ensuring full compliance with Department of Defense technical standards and mandatory military labeling requirements. The work must meet stringent performance and safety criteria to support military vehicle operations, with all products required to be free of asbestos and properly identified according to federal defense specifications. The procurement is classified as a subcontract under NAICS code 336340, indicating involvement in the automotive parts manufacturing sector, and the performance location is designated as Fort Hood, Texas, with a zip code of 76544-0000. The solicitation was posted on July 26, 2026, with a firm response deadline of August 6, 2026, providing suppliers with a limited window to submit proposals. This opportunity is managed by the Department of Defense under the Land Supplier Operations Vehicle Support organization, emphasizing its role in sustaining critical military ground vehicle maintenance and readiness. All bids must adhere strictly to the technical and labeling specifications outlined by the Defense Logistics Agency, and interested parties are directed to the official DIBBS portal for detailed submission instructions and requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336340
New
DIBBS
Supply of Reservoir Pump Assemblies (Commercial Off-the-Shelf Component)The contract calls for the procurement and delivery of 43 units of a Reservoir, Pump Assembly identified by NSN 2530015776257, a commercial off-the-shelf component designed to meet military-grade specifications. All units must be shipped FOB origin with packaging and labeling that comply strictly with applicable standards, ensuring proper handling and traceability throughout the supply chain. This is a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, exclusively reserved for small businesses registered with the SBA, and falls under NAICS code 336340 which pertains to Other Motor Vehicle Parts Manufacturing. The solicitation was posted on July 26, 2026, with responses due by August 10, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. All deliveries and compliance obligations are tied to the performance terms outlined in the solicitation, with no specified place of performance beyond the origin shipping point.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 336340
New
DIBBS
BRAKE LINING KITThe contract is for a Brake Lining Kit designated for use on a Crane Carrier, with the NSN/Part Number 2530-01-156-0448 and a quantity of two thousand units. The solicitation, identified as SPE7L3-26-T-134H, was posted on July 26, 2026, with a response deadline of August 6, 2026. All supplied items must be free of asbestos, and any prior components containing asbestos are strictly unacceptable. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided DLA web portal, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment supersedes it. The material must comply with Clause L30 and Provision 4 for alternative material approval. Delivery is required within ten days after award, and the place of performance is designated as Fort Hood, Texas, with a ZIP code of 76544-0000. The contracting office falls under the Department of Defense, specifically the Land Supplier Operations Vehicle Support, with Lee Miller listed as the primary point of contact for inquiries.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336340
New
DIBBS
VALVE, BRAKE PNEUMATThe contract, identified by solicitation number SPE7LX-26-U-9024, is a Unilateral Simplified Indefinite-Delivery Contract (SIDC) issued by the Defense Logistics Agency’s Strategic Acquisition Program Directorate under a Total Small Business Set-Aside for NAICS code 336340, specifically targeting the procurement of 161 brake pneumatic valves with NSN 2530-01-576-9837. The estimated quantity is non-binding and for planning purposes only; however, the contract establishes a guaranteed minimum purchase of 24 units and a cap of $350,000 in total contract value, with no option periods or ranges specified. Delivery is required within 75 days after delivery order issuance under FOB Origin terms, meaning the contractor bears responsibility for costs and risks until the goods are loaded at the origin point. The items must be delivered to destinations determined by individual delivery orders, and the government conducts inspection and acceptance at the destination. Pricing is fixed at $161.00 per unit, resulting in an estimated total of $25,921, though actual purchases depend on order placement by the government. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with packaging code U, preservation method 31, intermediate containers E5 in quantities of 36, and unit containers D3. Palletization must comply with DLA’s RP001 requirements, and all markings require GS1-128 barcoding. Hazardous materials, if any, must be labeled per OSHA’s Hazard Communication Standard, with approval required for non-exempt materials prior to award, and radioactive items exceeding 0.002 microcuries per gram must be clearly identified under MIL-STD-129. The contract incorporates numerous FAR and DFARS clauses including Equal Opportunity for Workers with Disabilities, Combating Human Trafficking, Employment Eligibility Verification, Sustainable Products, Safeguarding Contractor Information Systems, NIST SP 800-171 Assessment Requirements, and Notification of Potential Safety Issues—all enhanced by Deviation 2026-00038 or similar. Contractors must submit invoices via Wide Area WorkFlow (WAWF), register in the system, and comply with DFARS Appendix F formatting. The contract includes clauses requiring accelerated payment to small business subcontractors
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 336340
New
Federal
Towing Equipment and Trailer Brake System SupplierThe contract seeks a supplier to provide and integrate a factory-installed Class III or IV towing package, which must include a 7-pin wiring harness and a trailer brake controller, ensuring full compatibility and seamless operation with the target vehicle platform. The equipment must be installed at the manufacturing level and meet all performance, safety, and technical standards required for military-grade towing applications. The work is subject to strict integration protocols to guarantee reliability under operational conditions, with all components fully certified and documented for compliance. This opportunity is a total small business set-aside under NAICS code 336340, restricted to small business concerns as defined by the SBA, and is part of a Department of Defense effort managed by FA4830 23 Cons Cc. The place of performance is identified as Fort Moore, Georgia, with a submission deadline of August 4, 2026, at 6:00 PM Eastern Time. The solicitation is posted on SAM.gov and requires proposers to demonstrate technical capability, production capacity, and experience in supplying similar towing systems for defense or heavy-duty commercial applications. All responses must adhere to federal acquisition requirements and include documentation of small business eligibility.
FA4830 23 Cons Cc

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 336340
New
DIBBS
COTS Parts Kit Supply (Automatic Transmission Filter)The contract entails the supply of 2,263 units of a commercial off-the-shelf Automatic Transmission Filter Kit, identified by NSN 4330011216350, to be sourced exclusively from approved manufacturers including General Motors, Wix Corp, and Baldwin Filters. The kits must comply with all technical specifications and are strictly prohibited from containing cork gaskets, ensuring durability and performance under operational conditions. The requirement is part of a subcontract under the Department of Defense’s Land Supply Chain ESOC Buys office, with performance to be delivered to Tracy, California, 95304-5000. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, and is classified under NAICS code 336340, indicating its alignment with automotive transmission manufacturing. The contract does not specify a set-aside type nor include a point of contact, and bids must be submitted through the DIBBS platform using the referenced solicitation link. All suppliers must be pre-approved and in full compliance with military-grade COTS standards to qualify for award.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 336340
New
DIBBS
Vehicle Bumper Manufacturing and SupplyThe contract entails the manufacture and supply of two vehicular bumpers identified by NSN 2540015226155, with all units required to meet applicable military specifications. This includes full compliance with packaging and marking standards as dictated by defense procurement guidelines, ensuring each unit is properly prepared for handling, storage, and deployment. Government inspection at the point of origin is mandatory, meaning all products must pass formal quality assurance checks before release, confirming adherence to technical and performance requirements. The work is to be performed under a subcontract awarded by the Department of Defense through its Land Supplier Operations Vehicle Support division, with performance centered at New Cumberland, Pennsylvania, in the zip code 17070-5002. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026. The North American Industry Classification System code 336340 indicates the work falls under motor vehicle body manufacturing, aligning the contractor with expertise in producing durable, mission-critical vehicle components for military use. All deliverables must be completed and verified prior to the deadline to ensure timely support of operational readiness.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 336340
New
DIBBS
New Brake Shoe Manufacturing SupplyThe contract requires the supply of 41 new brake shoes identified by NSN 2530-00-846-1830, manufactured to comply with military drawing CS 2530-0042 and adhere to DLA quality standards. Any proposed use of alternative materials is strictly subject to prior approval under Clause L30, ensuring all components meet established performance and safety requirements. The deliverables must be produced and delivered to the designated place of performance in Tracy, California, with ZIP code 95304-5000. This solicitation is classified as a subcontract under NAICS code 336340, issued by the Department of Defense under the Land Supplier Operations Vehicle Support organization. The opportunity was posted on July 23, 2026, with a firm response deadline of August 3, 2026. All submissions must be made through the designated DIBBS portal prior to the closing time to be considered.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

5 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
DISK, SOLID, PLAINThe contract pertains to the procurement of two solid plain disks with NSN 5340-01-005-1903 under solicitation SPE7L1-26-T-882P, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days of award, and responses are due by August 10, 2026. The item falls under NAICS code 332510, and the solicitation is governed by DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, accessible via the provided web link. All technical and quality specifications referenced by R or I numbers are incorporated by reference and must be strictly adhered to. Sampling and inspection protocols must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with the manufacturer allowed to choose attribute or variable inspection methods unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; any unspecified attributes are deemed major. Acceptance criteria require zero non-conformances in the sample lot under MIL-STD-105/ASQ Z1.4 unless the contract specifies otherwise. Government identification must be removed from non-accepted supplies, and all provisions are subject to the revision of the DLA Master List in effect at the relevant solicitation or award date. Contact for inquiries is Michael Nordahl at dla.flbc2prs@dla.mil or 445-737-0596.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
NOZZLE, FUEL INJECTIONThe contract specifies the procurement of a fuel injection nozzle with part number 27910-10 and NSN 2910013183720, quantity of eight units, to be delivered within 20 days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and unit containerization, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to the Assault Craft Unit 4 in Virginia Beach, Virginia, with explicit instructions to avoid parcel post and ship via the fastest traceable means. The required delivery date is July 10, 2026, with inspection and acceptance occurring at the destination. The contract includes detailed government-use identifiers, freight shipping information, and a point of contact for inquiries.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESSThe contract pertains to the procurement of one unit of a specific item identified by NSN 5340015750820 and part number AT364985 under solicitation SPE7L1-26-T-885S, with a required delivery within 20 days of award. The item must be delivered FOB origin with zero tolerance for quantity variance, inspected and accepted at the destination, and packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which supersedes ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 guidelines. If the item is classified as hazardous under FED-STD-313, it must be packed in accordance with TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The item must be shipped by traceable means, not parcel post, and delivered to the designated military facility at Camp Lejeune, NC, using the specified freight address and contact information. The required delivery date is July 24, 2026, and the contract includes government-only identifiers and logistics codes for internal tracking and distribution. All technical and quality specifications referenced in the DLA Master List are binding and take precedence over any standard commercial practices.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
LIFTING TOOL, HUB ANThe contract solicits 14 units of a Hub and Final Drive Lifting Tool with NSN 4910-01-127-2712, under solicitation number SPE7L1-26-Q-1382, with a required delivery deadline 320 days after award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. The item must comply with DLA packaging requirements and严禁 the use of Class I ozone-depleting chemicals, requiring approval for any alternative substances unless explicitly permitted by specifications. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons anywhere, including U.S.-based subsidiaries or employees, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA export control training, and formal authorization from DLA. The place of performance is specified as Texarkana, Texas, 75507-5000, and the contracting officer is Adam Howell, reachable via email and phone provided. The NAICS code is 333310, and the solicitation was posted on July 28, 2026, with responses due by August 4, 2026.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAINThe contract pertains to the procurement of one unit of a plain seal identified by NSN 5330-01-584-9181 and purchase request number 7017465423, with a required delivery within 20 days to the destination APO AE 09321, FOB destination. Packaging must comply strictly with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The item is classified under the DoD unit of issue system, and packaging and palletization must adhere to DLA’s official packaging requirements referenced in RP001. The delivery is destined for the Royal Jordanian Air Force at Muwaffaq Salti Air Base in Jordan, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract includes detailed government-use codes and project identifiers, and full technical and quality specifications are incorporated by reference from the DLA Master List of Technical and Quality Requirements. The solicitation number is SPE7L1-26-T-885J, issued under a federal acquisition framework with a response deadline of August 10, 2026, and an original required delivery date of July 15, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
TAPPET, ENGINE POPPEThe contract is for the procurement of six TAPPET, ENGINE POPPE LIFTER, VALVE units with NSN 2815-00-450-9341 and part number 7S3161 supplied by CATERPILLAR INC. Each unit has a fixed price of $6.00, resulting in a total contract value of $36.00, with delivery required within five days of award at FOB origin. The items must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, adhering to the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Packaging must follow RP001 guidelines, with palletization conforming to specified DLA requirements and no parcel post permitted for shipment. Deliveries are to be routed to the government facility at Fort Eustis, Virginia, with a required delivery date of July 27, 2026, and must be sent by the fastest traceable means. The contract enforces zero variance in quantity and mandates inspection and acceptance at destination. Government-specific identifiers and markings are required, and all supplies must be labeled and documented according to DLA protocols, including the use of the provided military freight address, mark for details, and tracking information. The solicitation number is SPE7L1-26-T-883V, issued under the Department of Defense’s Land Supply Chain, with procurement subject to federal acquisition regulations and technical directives.
Other Engine Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RINGThe contract is for one spacer ring identified by NSN 5365-15-120-2240 and part number 60154625 manufactured by IVECO DEFENCE VEHICLES S.P.A., classified as a commercial item under DoD procurement guidelines. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including specific methods for preservation, wrapping, and unit containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and acceptance requires zero non-conformances unless otherwise directed. Delivery is FOB origin within 20 days, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated military destination in Camp Lejeune, North Carolina. The contract is issued under solicitation SPE7L1-26-T-884G with a required delivery date of July 22, 2026, and ties to a purchase request number 7017607337 under a single unit of issue at a fixed price of $1.00. Government-specific data codes and shipping instructions are provided for logistics coordination, with procurement oversight by the Department of Defense’s Land Supply Chain through Katherine Woods as the point of contact.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336350
New
DIBBS
GEAR SUBASSEMBLY, SPThe contract pertains to the procurement of one gear subassembly with NSN 3010-01-570-7423 and part number A88245047, issued under solicitation SPE7L1-26-T-883Q by the Department of Defense’s Land Supply Chain. Delivery is required within five days of contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence. The item must be palletized per DLA packaging standards and shipped via traceable means, excluding parcel post, to the designated delivery point in Burlington, Kentucky. The unit of issue is each, with a total price of one unit at $1.00, and the required delivery date is July 29, 2026. All markings, labels, and documentation must follow specified government formatting guidelines, including the inclusion of the government procurement request number and designated shipping identifiers.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC STThe contract is for the procurement of 22 units of a nonmetallic strip seal with NSN 5330-01-183-7118, under solicitation SPE7L1-26-T-884U, issued by the Department of Defense’s Land Supply Chain. The item is classified as a commercial off-the-shelf product, and delivery is required within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Sampling and inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, using a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. The place of performance is Tinker AFB, OK, with Kristina Derry listed as the primary point of contact and the response deadline set for August 10, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
CABLE AND CONDUIT AThe contract pertains to the procurement of one unit of a vehicular cable and conduit assembly identified by NSN 2530015596286 and part number 15300, supplied by SILVER EAGLE MANUFACTURING CO, under solicitation SPE7L1-26-T-885M. Delivery is required within 20 days from the award date with FOB origin terms, and no variance in quantity is permitted. The item must be packaged and preserved in strict compliance with MIL-STD-2073-1E and NEMA-WC26 standards, with marking governed by MIL-STD-129 and special preservation method ZZ as defined in SPE7L1-26-T-885M. The product is to be delivered to the designated government facility at 3920 KIRKWOOD HWY, WILMINGTON DE 19808-5194, with shipment required via the fastest traceable means and parcel post expressly prohibited. Inspection and acceptance occur at destination, and all packaging and shipping of hazardous materials must adhere to IP025 specifications. Preservation, packaging, and packing methods follow the technical requirements referenced in the DLA Master List of Technical and Quality Requirements. The contract includes precise government-only identifiers and logistical codes including TCN M2232061980033, RDD, and project code TP 2, with the original required delivery date set for July 23, 2026. Point of contact for procurement inquiries is Kristina Derry at DLA.
Other Motor Vehicle Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
O-RINGThis contract specifies the procurement of a single O-RING with National Stock Number 5331-01-670-1078 and part number 391 2882 499 from EATON CORP FLUID POWER OPNS, under solicitation SPE7L1-26-T-884B. The item must be delivered within five days of contract award, FOB origin, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-DTL-117, TYPE II, CLASS C, STYLE 1, requiring medium duty, waterproof, greaseproof, and opaque sealing to protect against ultraviolet degradation. Marking shall follow MIL-STD-129, including special instruction “20 -20 Do not bend,” and palletization must meet DLA packaging requirements. The supply is destined for Prince Sultan Air Base, Saudi Arabia, with freight logistics governed by DLAD PROC NOTES C19 and C20. Technical and quality requirements referenced via R and I numbers are defined in the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The unit of issue is each, and the purchase request number is 7017636739. The contract includes federal supply classification data and imposes hazardous materials shipping compliance under IP025. The original required delivery date is July 27, 2026, with a response deadline of August 10, 2026.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details