This Solicitation opportunity from California was posted on March 11, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Cap and Seal of Fore & Alt Lift

Closed

25S-CU-107State & Local

Submission Closed04/18/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910

New

Theatre Mold Remediation Scope of Work

Solicitation # AT25-0006

Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project was initiated following a sprinkler system failure that caused significant water damage. The scope of work requires the remediation of the entire building, including cleaning visible mold from CMU walls, concrete floors, and vinyl tiles, as well as the removal and replacement of affected drywall, gypsum wallboard, and acoustical tile ceiling finishes. Additionally, the contractor must clean or replace damaged theater seating cushions and perform dehumidification to maintain humidity levels at or below 50 percent. All work must adhere to ANSI/IICRC S520 standards, EPA guidelines, OSHA regulations, and the findings of the Micro Air Inc. Mold Testing report dated April 11, 2024. The contract is a single lump sum award based on best value, with evaluation weights distributed across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Key requirements include the provision of a Certified Industrial Hygienist for verification and final clearance, a detailed remediation plan featuring HEPA filtration and negative air pressure, and compliance with Davis-Bacon Act wage determinations. Bidders must hold a valid Indiana Contractor's License and provide proof of automobile and workers compensation insurance, naming Adams and Associates, Inc. as an additional insured. Proposals must be submitted on company letterhead and include a detailed cost breakdown, a timeline for substantial completion, and a 90-day bid guarantee. Work must commence within 14 days of the Notice to Proceed, and payment is issued on Net 30 terms.

Atterbury Job Corps Center

POSTED

DEADLINE

Asbestos Abatement and Hazardous Material DisposalThis subcontract for the City of Newport News Codes Compliance involves the identification, removal, and legal disposal of asbestos-containing materials and other hazardous substances. The selected contractor will support prime contractors by implementing containment systems and HEPA filtration to ensure all materials are removed according to strict project specifications. The final deliverables include a fully cleared site and all necessary hazardous waste disposal manifests. To qualify for this engagement, the contractor must be a licensed Asbestos Abatement Contractor and hold all required EPA and state certifications. The project falls under NAICS code 562910, with a response deadline set for November 2, 2026.

POSTED

DEADLINE

Contaminated Soil RemediationThis subcontract for Contaminated Soil Remediation involves the removal and legal disposal of contaminated soil for prime contractors working on City of Naperville public utility projects. The selected provider will be responsible for excavating materials and transporting them to approved facilities, ensuring all work aligns with the Geotechnical Exploration Report and LPC-663 standards. To qualify, contractors must possess valid licensed hazardous waste hauling and disposal certifications. The project deliverables include a site completely cleared of contaminated soil and the provision of all necessary disposal manifests. This opportunity is managed by the Illinois Public Utilities Water division under NAICS code 562910. Interested parties must submit their responses by the deadline of November 20, 2026.

Public Utilities (Water) | DPU-W

POSTED

DEADLINE

Asbestos and Lead-Based Paint AbatementThis subcontract for the Fulton County Purchasing Department in Georgia focuses on the identification, handling, removal, and lawful disposal of hazardous materials. The scope of work specifically includes the abatement of asbestos-containing materials and the removal of lead-containing materials and hazardous coatings. To ensure safety and compliance, the contractor must utilize specialized containment systems and HEPA filtration to deliver certified asbestos-free and lead-free structures. Qualified providers must hold NESHAP certification and the necessary hazardous materials handling licenses. This opportunity falls under NAICS code 562910 and was posted on October 28, 2026, with a response deadline of November 20, 2026. The selected subcontractor will support prime contractors on various projects managed by the county.

Fulton County Purchasing Department

POSTED

DEADLINE

Environmental Remediation and Tree ProtectionThis subcontract for Environmental Remediation and Tree Protection involves providing specialized services for prime contractors on municipal projects within the City of Naperville. The scope of work includes the removal and disposal of 100 cubic yards of contaminated soil, as well as urban forestry protection measures such as tree root pruning and the installation of protective fencing and tree trunk protection. To qualify, the contractor must hold the necessary certifications for hazardous waste hauling and disposal. Key deliverables include the provision of protected tree stands and the submission of certified disposal records. The project is managed under the Public Utilities Water division of the Illinois agency, with a response deadline set for November 20, 2026.

Public Utilities (Water) | DPU-W

POSTED

DEADLINE

Hazardous Materials AbatementThis subcontract for Hazardous Materials Abatement involves the identification and removal of asbestos and other dangerous substances for prime contractors working on City of Jackson Community Development projects. The selected contractor is responsible for ensuring all abatement activities adhere to MIOSHA, DEQ, OSHA, and USEPA NESHAP standards, utilizing specialized containment and filtration equipment based on Pre-Demolition Compliance Survey assessments to deliver a certified hazardous material free site. To be eligible, contractors must possess a certified hazardous material abatement license and a permit from the Department of Community Development. This opportunity falls under NAICS code 562910 and was posted on October 28, 2026, with a response deadline of November 5, 2026.

Community Development

POSTED

DEADLINE

Lead and Asbestos Testing and RemovalThis subcontract for the City of Fort Lauderdale involves the testing, abatement, and disposal of lead-based paint and asbestos-containing materials for bridge projects managed by the Public Works Department. The selected contractor will be responsible for collecting samples for laboratory analysis, installing necessary containment systems, and transporting all hazardous materials to approved disposal facilities. The contractor must ensure full compliance with all federal, state, and local regulations throughout the process. Key deliverables include the provision of detailed laboratory analysis reports and official certified documentation for disposal and clearance. The response deadline for this opportunity is November 30, 2026.

City of Fort Lauderdale

POSTED

DEADLINE

Environmental Site Investigation and RemediationThis subcontract for Environmental Site Investigation and Remediation involves performing critical site assessments and land remediation for prime contractors working on Defence Infrastructure Organisation residential projects at Feltham Barracks. The scope of work focuses on a former military intelligence facility, where the provider must conduct extensive soil and groundwater testing to identify contaminants and implement effective remediation strategies to ensure the land is safe for residential development. The contractor is responsible for delivering comprehensive environmental impact reports and obtaining the necessary remediated site certifications. Operating under NAICS code 562910, the project ensures that all environmental hazards are mitigated in accordance with safety standards to facilitate the transition of the military site into a residential area.

Defence Infrastructure Organisation

POSTED

DEADLINE

Asbestos Removal and AbatementThis subcontract for Asbestos Removal and Abatement involves the physical removal, containment, and disposal of asbestos-containing materials for prime contractors working on University of Bedfordshire facility projects. The selected provider must implement strict containment measures, including the use of negative pressure units and HEPA filtration systems, to prevent fiber release and ensure the safe transport of hazardous waste in accordance with UK regulations. To qualify, the contractor must hold a Licensed Asbestos Removal Contractor certification and maintain full compliance with HSE standards. Key deliverables include the provision of certified asbestos-free areas and the submission of official waste consignment notes. The response deadline for this opportunity is November 27, 2026.

University of Bedfordshire

POSTED

DEADLINE

Provision of Asbestos Management & Compliance Service

Solicitation # UoB/P EST - 00000747

The University of Bedfordshire is soliciting proposals under solicitation number UoB/P EST - 00000747 for the provision of asbestos management and compliance services. This contract, categorized under asbestos removal services, covers multiple performance locations including Bedford, Luton, Buckinghamshire CC, and the broader Bedfordshire and Hertfordshire area. The estimated total value of the contract is 141,666 GBP excluding VAT. The initial period of performance is estimated to run from January 1, 2027, to December 31, 2029, with the possibility of two twelve-month extensions extending the term through December 31, 2031. Interested parties must submit their responses via the in-tend portal by the deadline of November 27, 2026, at 12:00pm. Detailed award criteria and specific deliverables are contained within the tender documents available on the procurement portal.

University of Bedfordshire

POSTED

DEADLINE

Mold Abatement SpecialistThis subcontract opportunity is for a Mold Abatement Specialist to provide removal and remediation services for prime contractors working on Montebello Unified School District facility projects in Montebello, California. The scope of work includes the installation of containment, three-stage decontamination units, and negative air pressure systems. Specific tasks involve removing drywall and ceiling grid tiles, followed by HEPA vacuuming, wet wiping, and kiln painting to the studs to ensure a mold-free environment verified by third-party clearances. The project requires the use of certified mold abatement technicians and strict adherence to CAL/OSHA compliance standards. Interested parties must respond by November 2, 2026. The work falls under NAICS code 562910 and is focused on delivering safe, remediated spaces within the school district's facilities.

Montebello Unified School District

POSTED

DEADLINE

MPE Three Classroom Mold Abatement - Rooms 22, 23, 24

Solicitation # 01 (2026-2027)

The Montebello Unified School District is soliciting bids under RFQ No. 01 (2026-2027) for mold abatement services in three classrooms, specifically Rooms 22, 23, and 24 at MPE in Montebello, California. The scope of work includes the abatement process, cleaning of A/C systems, and the movement of furniture before and after the project. Contractors must utilize containment, three-stage decors, and negative air pressure, while maintaining CAL/OSHA safety standards and good housekeeping. All work will be monitored by a third-party consultant, and the contractor is responsible for any necessary re-cleaning if good clearances are not achieved. Regulated disposal must be accompanied by a manifest, and proper mold signage and yellow caution flagging are required on-site. Bids must be submitted by November 2, 2026, at 9:00 a.m. via the designated secure portal. The contract will be awarded to the best value bidder based on price, proven ability to comply with specifications, capability, and credibility, with a preference for local firms in the event of equal low bids. Requirements for submission include a Non-Collusion Affidavit and a Certificate of Workers' Compensation Insurance. The successful vendor must provide a minimum one-year warranty and maintain comprehensive insurance naming the District as an additional insured. Payment is due 30 days after the receipt of a correct invoice or acceptance of goods. The District reserves the right to terminate the agreement with 30 days' written notice or immediately upon failure to perform.

Montebello Unified School District

POSTED

1 day ago

DEADLINE

in 4 days

AI Contract Overview

This contract involves the complete removal and sealing of the fore and aft lift cylinders located within a concrete vault, with the primary goal of ensuring safety and proper site restoration. The scope includes the careful disassembly of all lift components such as lift heads, arms, saddles, cover plates, and control mechanisms, followed by perimeter saw cutting and removal of the surrounding angle iron frame. The excavated voids will be backfilled with gravel, reinforced with rebar dowels, and then filled with concrete to create a level, flush floor that matches the existing surface. All removed materials, including metal components and debris, must be properly disposed of in accordance with regulations, with hydraulic oil drained from the lift cylinders and contained in sealed drums left on-site for the client to dispose of. The client is responsible for handling the disposal of hydraulic oil, any fluids or water found within the vault, and potential soil remediation if contamination is present. Site access must be coordinated with the facilities manager to ensure safety and efficiency. The contractor is required to adhere to safety standards, maintain a clean work environment, and perform dust control measures. The project is funded through a solicitation posted by the San Mateo County Transit District, with a contract value estimated between $50,000 and $150,000, and must be completed by the response deadline of April 18, 2025. The primary point of contact for the project is Dominic Brooke, reachable via email or phone.

General Info

Agency

California → San Mateo County Transit District

NAICS

562910 - Remediation Services

Place of Performance

CA, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedMar 11

Solicitation

Response DeadlineApr 18

Deadline has passed

Submission Closed

04/18/2025, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → San Mateo County Transit District

Contacts1 person available

OfficeN/A

Organization / AgencyCalifornia → San Mateo County Transit District

Office AddressN/A

Contacts

Dominic Brooke

contact@example.gov

+1 (555) 000-0000

Full Description

Statement of Work: CAP & SEAL of Fore & Aft Lift2. Project Objectives• Completely and safely remove the fore and aft lift cylinders and associated components.• Backfill the resulting voids with gravel and concrete to create a flush and level finished floor.• Ensure proper disposal of all removed materials and containment of hydraulic oil.• Leave the concrete vault in place, 3. Scope of Work3.1. Lift Cylinder Removal and Preparation3.1.1. Cylinder Removal:• Completely remove both fore and aft lift cylinders from the concrete vault.3.1.2 Component Removal:Remove all associated components, including but not limited to:• Lift heads.• Lift arms.• Lift saddles.• All metal cover plates.• Inground control mechanisms.3.1.3. Perimeter Saw Cutting:• Saw cut the perimeter of the lift opening to facilitate the removal of the angle iron frame.3.1.4. Angle Iron Frame Removal:• Remove the angle iron frame surrounding the lift.3.2. Backfilling and Concrete Pour3.2.1. Gravel Backfill:Backfill the excavated voids with compacted gravel to a specified level.3.2.2. Rebar Dowel Installation:Install rebar dowels into the existing concrete to provide reinforcement for the new concrete pour.3.2.3. Concrete Pour:Pour concrete to fill the remaining void, ensuring a flush finish with the existing floor level.Finish the concrete to match the existing floor as closely as possible.3.3. Material Handling and Disposal3.3.1. Material Removal:Remove all metal components, excavated materials, and construction debris from the site.3.3.2. Proper Disposal:Properly dispose of all removed materials in accordance with local, state, and federal regulations.3.3.3. Hydraulic Oil Containment:Drain all hydraulic oil from the lift cylinders and place it into provided 55-gallon drums.Leave the sealed 55-gallon drums on-site for the client's disposal.3.3.4. Piping Capping:Cap all piping related to the lift at the nearest accessible source.4. Client Responsibilities4.1. Oil Disposal:The client is responsible for the proper disposal of the 55-gallon drums of hydraulic oil.4.2. Fluid/Water in Pit:If any fluid or water is discovered within the concrete vault, the client will be responsible for determining its nature and arranging for its removal.4.5. Soil Remediation:Contaminated soil remediation, if required, is the sole responsibility of the client.4.7. Site Access:Clear and safe access to the work area for the contractor's personnel and equipment will be provided by the SamTrans. Contractor needs to coordinate this with Facilities manager.5.. Safety:Adhere to all applicable safety regulations and provide a safe working environment.5.1. Clean-up:Maintain a clean and organized work area and perform a thorough clean-up upon completion.Perform dust control during the work.