This Solicitation opportunity from Department Of Defense was posted on July 21, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CAP, ASSY INDICATOR

Closed

SPE4A6-26-T-08PLFederal

Submission Closed07/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPRPA127QYA27

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # N0038327QAA18

Navsup Weapon Systems Support

POSTED

DEADLINE

VALVE ASSY,RELIEF, NSN 1560-014720353, Part-Number 4951062 and 101158-1, Weapon System Designator Code CXN

Solicitation # SPE4A727R0090

This Sources Sought Notice issued by DLA Aviation is an informational request to identify qualified manufacturers or suppliers for a relief valve assembly, identified by NSN 1560-014720353 and part numbers 4951062 and 101158-1. This notice is not a formal solicitation or a request for offers, and the government is not committed to awarding a contract based on the responses received. Interested parties must submit their responses by October 28, 2026. To be considered as an Approved Source, companies must submit a comprehensive application package through the Source Approval Request program. This package must provide technical data demonstrating that the contractor can manufacture the product to a quality level equal to or better than the current requirement. Applications should be directed to the specific buyer if a solicitation is open, or sent to the DLA Aviation SAR Program Office in Richmond, Virginia, if no solicitation is currently active.

POSTED

DEADLINE

Solicitation # SPRPA127QYA25

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

CH-53K Program Support Under BOA N00019-19-G-0029

Solicitation # N00019-19-G-0029_Rev1

Naval Air Systems Command

POSTED

DEADLINE

Solicitation # SPRPA126QRC64

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # SPRPA126QZB37

This solicitation, identified as SPRPA126QZB37, seeks quotes for a COVER, ACCESS, AIRCRA component under emergency acquisition flexibilities, formerly known as Special Emergency Procurement Authority, indicating urgency and non-standard procurement procedures. The NAICS code 336413 applies with a size standard of 1,250 employees, and the contracting office is the Department of Defense’s DLA Aviation in Philadelphia, Pennsylvania. Responses are due by August 3, 2026, at 8:30 PM ET, with no drawings provided and the requirement tied to Wide Area Workflow Payment Instructions using a combined invoice and receiving report. Mandatory use of Workflow Pro’s Assist Module is required, with a designated point of contact for support. The contract includes compliance clauses relating to Buy American Act certificates, equal opportunity for veterans and workers with disabilities, security prohibitions, and recovered materials reporting, all effective as of recent fiscal years. Annual representations and certifications apply under a deviation, and royalty information obligations are included. The primary point of contact is Jonathan M. Rivera, reachable via phone, and the solicitation is accessible through the SAM.gov portal.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # SPRPA126QUA29

The solicitation for PANEL ASSEMBLY, KEY under number SPRPA126QUA29, issued by the Department of Defense through the PAA Aviation office in Philadelphia, requires offers to comply with a suite of standardized clauses covering procurement regulations including Buy American provisions, Equal Opportunity for Workers with Disabilities, Annual Representations and Certifications, and Royalty Information. Offers must be submitted by the deadline of August 17, 2026, at 8:30 PM EDT, and are subject to emergency acquisition flexibilities historically known as SEPA. Only government-approved sources of supply are eligible for award; distributors must provide an authorized distributor letter on the source's official letterhead at the time of proposal submission. The NAICS code 336413 identifies the category, and the contract places no specified place of performance beyond the agency's location in Philadelphia, PA. The solicitation explicitly states that drawings are not available, and proposals submitted via facsimile are not permitted. All offerors must adhere to strict source approval requirements, and failure to confirm authorized distribution status will render an offer technically unacceptable. The point of contact for inquiries and document submission is Keli Barish, reachable via email at [email hidden]. The solicitation is posted under the Federal Government’s SAM.gov portal and remains active until the response deadline, with no set-aside designation indicated. Compliance with all cited clauses and submission protocols is mandatory for consideration.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # SPRPA127QYA30

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # N0038327RAA16

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # SPRPA127QYA23

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # N0038327RAA14

Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The contract is for the procurement of two units of a cap assembly indicator labeled P/N 86-00091-113 with NSN 6220-01-464-2623, issued under solicitation SPE4A6-26-T-08PL by the Department of Defense’s ASC Commodities Division. Delivery is required within 171 days of award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with DLA’s Master List of Technical and Quality Requirements, including packaging per RP001 and MIL-STD-129, and non-hazardous materials must meet ASTM D3951 unless superseded by higher-priority DLA standards. The supplier must adhere to CMMC Level 2 Cybersecurity Self-Assessment requirements, physical identification per RQ017, and the removal of government identification from non-accepted supplies per RQ011. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The unit of issue is each (EA), and the delivery deadline is January 17, 2027, with the original required date being November 17, 2026. The responsible point of contact is Jessica Fuentes-Ossio, and the contract references applicable DLA transport, packaging, and labeling procedures.

General Info

Procure two cap assembly indicators, deliver by Jan 17, 2027, to New Cumberland, PA, per DLA specs and CMMC Level 2.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

RFQ SPE4A6-26-T-08PL Request for Quotations DLA Aviation

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 21

Solicitation

Response DeadlineJul 29

Deadline has passed

Submission Closed

07/29/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

JESSICA Fuentes-OSSIO

contact@example.gov

+1 (555) 000-0000

Full Description

CAP,ASSY INDICATOR
INDICATOR CAP CAUTION LIGHT PANEL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
IDENTIFY TO:
LUMINESCENT SYSTEMS, INC 14550 P/N 86-00091-113
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-08PL
SECTION B
PR: 7017572202 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017572202 0001 EA 2.000
NSN/MATERIAL:6220014642623
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/17/2027 Original Required Delivery Date:11/17/2026
SPE4A6-26-T-08PL
SECTION B
PR: 7017572202 PRLI: 0001 CONT’D
SPE4A6-26-T-08PL NSN/Part Number: 6220-01-464-2623 Quantity: 2 EA Purchase Request: 7017572202QTY: 2 Delivery: 171 days ADO