Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CAP, LENS

Active
SPE7L7-26-T-4562Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 25 units of a cap and lens component identified by NSN 6650-01-734-3460 and part number 080-0511-203, issued under solicitation SPE7L7-26-T-4562 by the Department of Defense through the DLA Distribution facility in New Cumberland, Pennsylvania. Delivery is required within 127 days from the award date with a firm delivery schedule targeting December 23, 2026, and an original required delivery date of April 25, 2027. Items must be shipped FOB origin with no variance allowed in quantity, inspected and accepted at destination, and packaged in strict compliance with MIL-STD-2073-1E standards, including specific packaging methods, materials, and unit containers coded as E5. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must meet DLA’s packaging requirements. The contract references technical and quality standards from the DLA Master List, requiring compliance with MIL-STD-1916 or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively. Zero non-conformances are mandatory in sample lots unless otherwise specified. Covered defense information provisions apply, and the unit of issue is the individual unit (EA), priced at $25.00 per piece for a total contract value of $625.

General Info

25 cap and lens units, NSN 6650-01-734-3460, $25 each, FOB origin, MIL-STD compliant, delivery by Dec 23, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7L7-26-T-4562.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
KURT BECKA
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAP,LENS
CAP,LENS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
DIALIGHT CORPORATION 83330 P/N 080-0511-203
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017315513 0001 EA 25.000
SPE7L7-26-T-4562
SECTION B
PR: 7017315513 PRLI: 0001 CONT’D
NSN/MATERIAL:6650017343460
DELIVERY (IN DAYS):0127
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/23/2026 Original Required Delivery Date:04/25/2027
SPE7L7-26-T-4562 NSN/Part Number: 6650-01-734-3460 Quantity: 25 EA Purchase Request: 7017315513QTY: 25 Delivery: 127 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L1-26-T-913F
This contract issued by the Department of Defense through the Defense Logistics Agency specifies the procurement of one vehicular bracket, part number 402/H2230 with NSN 2590-01-712-3185, under solicitation SPE7L1-26-T-913F. The item must be delivered within five days of contract award with no tolerance for quantity variance, shipped FOB origin, and inspected and accepted at the destination. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and palletization per DLA’s packaging requirements. The item must be marked with the provided special marking code and shipped via traceable freight methods, excluding parcel post, to the designated government freight address in Huntsville, Alabama. The contract strictly prohibits the use of Class I ozone-depleting chemicals in any form and requires any substitute materials to be submitted for approval unless explicitly authorized by the specification. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on the acquisition size. The unit of issue is established per DoD standards, and the item is designated for government use with specific identification codes including IPD, DIC, and project references. The required delivery date is August 3, 2026, and the contract’s point of contact is Kristina Derry of the Land Supply Chain organization.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
CRADLE, WEIGHING
Solicitation # SPE7M4-26-T-299N
The contract pertains to the procurement of two CRADLE, WEIGHING units under solicitation SPE7M4-26-T-299N, with a delivery requirement of 20 days after contract award. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with a valid US/Canada Joint Certification Program certification, completion of required DOD export control training, and approval from the DLA controlling authority may access the controlled data. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and the North American Industry Classification System code is 333310. The place of performance is Keyport, WA, 98345-7610, and the contract is managed by the Fluid Handling Division of the Department of Defense. The primary point of contact is Rory O’Reilly, reachable via email and phone provided. Additionally, the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization to meet cybersecurity requirements.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
INDICATOR, TEMPERATURE,
Solicitation # SPE4A5-26-T-322V
The contract pertains to the procurement of six temperature indicators with electrical resistance, identified by NSN 6685-01-169-8130 and part number 15297 from Electro Impulse Laboratory Inc, under solicitation SPE4A5-26-T-322V. Delivery is required within 171 days to the DLA Distribution San Joaquin facility in Tracy, California, with FOB origin terms and zero tolerance for quantity variance. The items must comply with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and specific DLA packaging requirements, including special marking code 05 indicating a delicate instrument. All packaging, preservation, and marking materials must be free of mercury or mercury-containing compounds, except where explicitly permitted for functional components such as batteries or sensors as defined by NAVSEA, and portable devices containing mercury must include double containment and be shock-proof per NAVSEA 5100-003D. Sampling and inspection protocols follow MIL-STD-1916 or comparable zero-based plans with acceptance criteria of zero non-conformances unless otherwise stated, and critical attributes are subject to verification levels VII or AQL 0.1. The contract enforces strict compliance with DLA’s Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition size, and the unit of issue is standardized per ANSI X12. The required delivery date is March 24, 2027, with a need ship date of January 31, 2027, and all transportation logistics must adhere to DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333310
New
DIBBS
GAGE, TIRE PRESSURE,
Solicitation # SPE7LX-26-U-9226
This contract specifies the procurement of tire pressure gages meeting strict technical and packaging requirements under the Department of Defense’s DLA system. The gages must have an inflation range of 10 to 160 PSIG, feature a dual-chuck design with a long extension and external indicating capability, and adhere to the Commercial Item Description for self-contained and inflator gages for pneumatic tires. The indicator bar must be at least .250 inches square with calibrated graduations on all four sides: inch-pound markings in 2 PSI increments every 10 PSI from 10 to 160 PSIG in black, and metric markings in 20 KPa increments every 100 KPa from 80 to 1100 KPa in red, ensuring readability when held with the dual chuck upward. The gages must be constructed of corrosion-resistant materials such as stainless steel or brass, and are designated as a critical application item. All components must comply with DLA Master List technical requirements referenced by R and I numbers, and sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, even when using MIL-STD-105/ASQ Z1.4 for lot size determination. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the gages or their contact surfaces, except for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, wrapping, and storage codes, and marking must follow MIL-STD-129 without special markings. The product is identified by NSN 4910-00-204-3170 and part number AA59568-002-B-3, with a required delivery in 116 days FOB origin, a quantity of 1,187 units, and zero variance allowed. Procurement is under a Service-Disabled Veteran-Owned Small Business Set-Aside, with inspection and acceptance occurring at destination, and all preservation, packaging, and marking activities strictly exclude mercury or mercury compounds.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333310
New
DIBBS
COVER, VACUUM TEST
Solicitation # SPE7M4-26-T-299L
The contract encompasses the procurement of three vacuum test covers identified by NSN/Part Number 4921-00-895-7026, with a delivery requirement of 20 days after order placement. The solicitation, issued under SPE7M4-26-T-299L, is open to full and open competition and falls under NAICS code 333310, indicating it relates to plumbing and heating equipment and commercial-type air conditioning. The item must comply with stringent cybersecurity requirements as the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization and handle Covered Defense Information in accordance with applicable standards. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The contract imposes strict limitations on materials and data handling. Ozone-depleting chemicals are explicitly prohibited, and any substitute chemicals must be submitted for approval unless already authorized by specification. Technical data associated with this item is subject to export controls under either ITAR or EAR, requiring prior authorization for any export or disclosure to foreign persons, including foreign nationals in the U.S. and subsidiaries. Access to such data is restricted to contractors who hold valid JCP certification, have completed mandatory DOD export control training and DLA’s questionnaire, and have been formally approved by DLA. Packaging must adhere to DLA procurement standards, and government identification must be removed from non-accepted supplies. Performance is scheduled for Keyport, WA, and inquiries should be directed to Rory O’Reilly at the provided contact details.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
GAGE, COMPOUND PRESSURE
Solicitation # SPE4A6-26-T-11TN
This contract specifies the procurement of two dial indicating compound pressure-vacuum gages with a nickel copper alloy diaphragm, 1/4 inch NPT gauge connection, saddle type process connection, 3 inch diameter pipe, filled with low temperature silicone and calibrated, identified by part number EA24-3CB4-RWBX D19-10 and NSN 6685-01-156-4640. The supplier, Monarch Supply Co Inc, must comply with strict technical and quality requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements, including zero non-conformances in sampling unless otherwise stated, and adherence to MIL-STD-1916 or ASQ H1331 for inspection. The gages must not contain mercury or mercury compounds in any component or direct contact, except for specific functional applications such as instruments or sensors authorized by NAVSEA, and portable devices must include a secondary containment boundary. All items must be packaged per MIL-STD-2073-1E, marked per MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletized according to DLA packaging requirements. No mercury or mercury compounds may be used in preservation, packaging, or marking. The delivery is FOB origin with no quantity variance allowed, and the inspection and acceptance points are at the destination. The required delivery date is December 2, 2026, with a need ship date of January 31, 2027, and the items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333310
New
DIBBS
EXTRACTOR, INSERT SE
Solicitation # SPE7M4-26-T-299H
The contract pertains to the procurement of three Extractor, Insert SE units under solicitation SPE7M4-26-T-299H, with a required delivery within 20 days of award. The item is classified under NAICS code 333310 and is managed by the Fluid Handling Division of the Department of Defense. Technical data associated with this item is subject to export control under ITAR or EAR, restricting its disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Only contractors certified under the US/Canada Joint Certification Program, having completed mandatory DOD export control training and approved by DLA, may access this controlled data. The contractor must also be a CMMC Level 2 Certified Third-Party Assessment Organization, ensuring cybersecurity compliance standards are met. All responses are due by August 17, 2026, and performance is to occur in Keyport, Washington, 98345-7610. Primary point of contact is Rory O'Reilly, reachable via email and phone provided.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
FILTER, LIGHT, OPTICA
Solicitation # SPE7L7-26-T-4565
The contract specifies the procurement of 200 units of a filter, light, optical instrument with part number 127881-001 and NSN 6650-20-000-4546, supplied by the approved source Cage 05257. Each unit is measured in EA and must be delivered FOB origin within 154 days, with no variance allowed in quantity. Delivery is required to DLA Distribution Red River in Texarkana, Texas, with inspection and acceptance taking place at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container codes, while marking must adhere to MIL-STD-129 with a special warning indicating “Glass do not drop.” The item is subject to stringent quality and technical requirements as defined in the DLA Master List of Technical and Quality Requirements, with sampling inspection following MIL-STD-1916 or ASQ H1331 using zero-defect acceptance unless otherwise stated. Critical, major, and minor attributes are assigned verification levels or AQLs, and unspecifiable attributes are treated as major. The contract includes compliance with defense information handling protocols, palletization standards, and transportation procedures as outlined in DLAD proc notes C19 and C20. The solicitation was issued on August 4, 2026, with a response deadline of August 17, 2026, under contract number SPE7L7-26-T-4565, and is classified under NAICS code 333310 for manufacturing of optical instruments and equipment.
RED RIVER RECEIVING BLDG

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
IDLER SHAFT TOOL
Solicitation # SPE7M4-26-T-299P
The contract is for the procurement of three IDLER SHAFT TOOLS under solicitation number SPE7M4-26-T-299P, with a delivery requirement of 20 days after award. The item is identified by NSN 4921-01-245-5298 and is associated with a purchase request numbered 7017727011. Technical data related to this item is subject to export control under either ITAR or EAR, meaning any disclosure of such data to foreign persons—including foreign nationals within the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to this controlled data is restricted to DLA contractors holding an approved US/Canada Joint Certification Program certification, who have completed required DOD export control training and the DLA questionnaire, and have received formal approval from DLA. The contract falls under NAICS code 333310 and is managed by the Department of Defense’s Fluid Handling Division, with performance occurring in Keyport, Washington. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026. The primary point of contact is Rory O’Reilly, reachable via email and phone provided.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7L1-26-T-912S
This contract is for the procurement of one unit of a CAP, FILLER OPENING with NSN 2590-99-613-9354, issued under solicitation SPE7L1-26-T-912S by the Department of Defense’s Land Supply Chain. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance—exactly one unit must be provided. The item must comply with all DLA Master List of Technical and Quality Requirements, which supersede any referencing standards such as ASTM D3951, and must be packaged in accordance with MIL-STD-129 and RP001 packaging guidelines. Ozone-depleting chemicals are strictly prohibited in manufacturing or processing, and any substitute materials require prior approval unless explicitly permitted by specification. Packaging must be palletized per DLA standards, labeled with correct unit of issue and quantity per unit pack, and marked with the designated military shipping address at Fort Carson, Colorado. The shipment must be sent via traceable freight methods—parcel post is prohibited—and is designated as a RDD(3-POS RDD)/NMCS shipment. The delivery destination, freight address, and mark-for address all coincide at Building 9628, Airfield Road, Fort Carson, CO 80913-4104, with the military tracking identifier W33R7X and project code TP 1. The original required delivery date is August 5, 2026, and the item must be labeled with the government-issued DIC and other internal identifiers for tracking. The primary point of contact for inquiries is Kristina Derry, and the solicitation response deadline is August 17, 2026. The contract enforces strict compliance with DoD unit of issue standards, and all technical specifications referenced through R or I numbers are incorporated by authority from the DLA Master List.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L3-26-Q-1228
The contract entails the procurement of three vehicular bracket components identified by NSN 2590-01-702-1921 under solicitation SPE7L3-26-Q-1228, with a response deadline of August 18, 2026, and a delivery requirement of 122 days after order. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be submitted for approval unless explicitly authorized by specifications. Technical data associated with this item is subject to export controls under ITAR or EAR, and its distribution is restricted to contractors certified under the US/Canada Joint Certification Program who have completed required DLA training and obtained approval. Unauthorized disclosure, including to foreign nationals regardless of location, is prohibited, and DFARS 252.225-7048 governs compliance. The contracting office is the Department of Defense’s Land Supplier Operations Vehicle Support, with performance occurring in New Cumberland, Pennsylvania, and primary point of contact is McKenzie Biniker.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
DIBBS
DENTAL KIT, EMERGENC
Solicitation # SPE2DH-26-T-5771
The contract is for a Dental Kit, Emergency Restoration, designated as the Chinook Tactical Medical Module Dental (TMM-DE), which is vacuum-packed in a resealable zip-closure bag for durability and field readiness. The kit contains a single unit identified by NSN 6520-01-565-3926 and is linked to purchase request number 7017722427. Delivery is expected within 20 days after order placement. The solicitation, issued under contract number SPE2DH-26-T-5771, was posted on August 4, 2026, with responses due by August 11, 2026. It falls under NAICS code 333310 and is managed by the Department of Defense through the Medical Supply Chain FSH. The place of performance is Fort Campbell, with a zip code of 42223-5000. Primary point of contact for inquiries is Tina Vu, reachable via email at tina.vu@dla.mil or phone at 4457371120. The solicitation is open to federal procurement and can be accessed through the DIBBS online portal.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 331221
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-Q-0347
This contract specifies the procurement of 101 feet of cold drawn steel bar, type 1020, with a cross-section measuring 0.500 inches across flats, delivered in whole-foot lengths between 8 and 12 feet, at a nominal weight of 0.850 pounds per foot. The material must fully comply with ASTM A108, ASTM A29/A29M-20, and ASTM A700-14 standards, and must be accompanied by a Certificate of Quality Compliance (mill certification) with every shipment, copies of which must be submitted to the DLA Troop Support Contracting Officer. Continuous marking is mandatory on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions, using only stamping or stenciling methods that are legible, permanent, waterproof, and non-contaminating; adhesive labels are required for bars under 0.250 inches in nominal OD, and tags are acceptable for wire. Packaging must strictly follow MIL-STD-2073-1E and MIL-STD-129R, with special preservation codes Z and ZZ as defined by ASTM A700, and palletization must adhere to DLA packaging requirements. The items are subject to destination inspection and acceptance with no variance allowed in quantity, under a firm fixed price term, and must be delivered within 30 days after award. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96; failure to comply renders bids non-compliant and may result in rejection or criminal penalties. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the Certificate of Quality Compliance requirement is defined under CDRL-METALSCERT. Delivery is to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with shipping and marking instructions detailed in applicable military and industry standards.
Rolled Steel Shape Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4564
The contract is for the procurement of five power supply units identified by NSN 6130-01-208-3442 under solicitation SPE7L7-26-T-4564, with a total small business set-aside designation and a NAICS code of 335312. Delivery is required within 154 days of award, and responses must be submitted by the deadline of August 17, 2026. The supply must comply with all applicable DLA packaging, technical, and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling for this simplified acquisition. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for approved functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. The alternate offeror must supply a complete data package, including full technical details for both the primary and alternate parts, as no data is currently available. The contract is managed by the Department of Defense through the DDSP New Cumberland facility, with Kurt Becka listed as the primary point of contact and performance to be delivered to a site in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002.
Motor and Generator Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 325991
New
DIBBS
NRP, INSULATION, TRAN
Solicitation # SPE8E5-26-T-3764
This contract pertains to the procurement of insulation material identified by NSN 9390-01-653-2249 and part number E576-0802-30-218033646A, with a quantity of three rolls, under solicitation SPE8E5-26-T-3764. The requirement is set aside for Women-Owned Small Businesses, with a delivery deadline of 83 days after award, and specifies FOB origin delivery with zero tolerance for quantity variance. All supplies must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, and palletization must adhere to DLA packaging guidelines. The item is to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with no special marking required beyond standard compliance. Technical and quality specifications referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with control determined by the solicitation or award date depending on acquisition size. The contract incorporates provisions for the removal of government identification from non-accepted supplies and may involve Covered Defense Information under RD003. Transportation procedures follow DLAD Proc Note C19 for general transport and C20 for first destination logistics. The unit of issue is RL, consistent with DoD standards, and the total contract value is derived from the listed unit price multiplied by the three-roll quantity. The responsible point of contact is Nafis Beyah at DLA, with the solicitation issued on August 4, 2026, and responses due by August 17, 2026. The original required delivery date was September 10, 2026, with the contract now requiring shipment no later than November 9, 2026. The contracting agency is the Department of Defense, operating through the DDSP New Cumberland Facility.
Custom Compounding of Purchased Resins

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 488190
New
DIBBS
SLEEVE, EXPANSION MA
Solicitation # SPE8E5-26-T-3767
The contract is for 1,023 expansion sleeves, part number FTS-4-0-3-8, identified by NSN 3460-01-498-6519, under solicitation SPE8E5-26-T-3767. Delivery is required within 153 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. The quantity is fixed with zero variance allowed, and the unit price is based on a single unit of issue. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must meet MIL-STD-129 labeling and storage requirements, and palletization must follow DLA Packaging Requirements for Procurement. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation logistics are governed by DLAD procedural notes C19 and C20. The item is subject to Covered Defense Information requirements, and any non-accepted supplies must have government identification removed. The contract stipulates documentation for source approval and adherence to specific procurement protocols. The original required delivery date is March 6, 2027, with a need ship date of January 18, 2027, indicating the timeline for fulfillment under the DLA contracting framework.
Other Support Activities for Air Transportation

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332994
New
DIBBS
SUPPORT, CHUTE, AMMUN
Solicitation # SPE7L7-26-Q-2109
The contract covers the procurement of three military-grade components: a support chute for ammunition, an accelerator machine, and a belt feed slide pin, all sourced from FN HERSTAL S.A. and identified by specific NSNs and part numbers. Quantities are strictly fixed at ten and eight units respectively, with zero percent variance allowed, and delivery is mandated at the destination point under FOB destination terms, with delivery windows of 252 and 295 days after award. All items are classified as critical application items subject to stringent technical and quality standards referenced from the DLA Master List, and must comply with MIL-STD-2073-1E packaging, MIL-STD-129 marking, and DLA packaging requirements. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and government identification must be removed from non-accepted supplies. Each item is designated as a defense article subject to ITAR regulations, requiring exporter registration with the Directorate of Defense Trade Controls, and technical data associated with the belt feed slide pin is subject to export controls under ITAR and EAR, restricted to contractors with approved JCP certification and completed training. The accelerator machine is also subject to demilitarization requirements under Category I munitions. Packaging and shipping instructions direct delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Procurement Notes C19 and C20. All documentation, including pricing, will be completed upon award, and the contract solicitation number is SPE7L7-26-Q-2109, issued by the Department of Defense with Charles Duncan as the primary point of contact.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4563
The contract specifies the procurement of a power supply item with part number LV28DE0.75 and NSN 6130-01-347-9392, supplied by Abbott Electronics Inc and Sure Power Inc, under solicitation SPE7L7-26-T-4563. A total quantity of four units is required, with delivery mandated within 91 days from the contract award, shipped FOB origin, and inspected and accepted at the destination. The item is classified as a critical application item, and all components must comply with stringent technical and quality requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements. Sampling for acceptance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise stated, with attributes assigned specific verification levels and AQLs. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional items such as batteries, fluorescent lights, sensors, or weapon systems, with portable devices using mercury requiring shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specified methods for preservation, wrapping, and unit containment, and all marking must conform to MIL-STD-129 without special codes. Palletization follows DLA packaging requirements, and the shipment is to be delivered to DLA Distribution at the New Cumberland, PA facility. The contract enforces a zero variance in quantity and includes specific transportation and shipping instructions referenced in DLAD procedural notes. The solicitation is a total small business set-aside under NAICS code 335312, with a response deadline of August 17, 2026, and an original required delivery date of February 20, 2027. Point of contact for inquiries is Lisa Kowalczyk at DLA.
Motor and Generator Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333611
New
DIBBS
NOZZLE ASSEMBLY
Solicitation # SPE8E5-26-T-3771
The contract pertains to the procurement of 48 nozzle assemblies with NSN 3433-01-158-2846 under solicitation SPE8E5-26-T-3771, issued by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 78 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The quantity is fixed with no variance allowed, and packaging must comply strictly with DLA’s Packaging Requirements for Procurement, including MIL-STD-129 labeling and either commercial packaging per ASTM D3951 or hazardous material packaging per TQ requirement IP025 if applicable. All packaging and palletization must adhere to RP001. The material must not contain intentional mercury or mercury compounds except in specific exceptions like batteries, fluorescent lamps, sensors, or weapon systems, and any portable mercury-containing items must be shockproof with a secondary containment barrier as per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The DLA Master List of Technical and Quality Requirements governs all specifications, overriding any conflicting standards. The contract requires compliance with Covered Defense Information protocols and references the DLA eProcurement portal for applicable technical and quality requirements identified by R or I numbers. The delivery address and shipping instructions are identical, directed to the DDSP New Cumberland Facility in Pennsylvania, with a required ship date of November 4, 2026, and original delivery deadline of November 10, 2026. Unit of issue is each (EA), and all documentation must reference the correct ANSI X12 unit of issue via the official DLA link.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541380
New
DIBBS
Mercury and Hazardous Substance Compliance VerificationThe contract requires verification and documentation that no mercury or mercury-containing compounds are present in direct contact with the valve, in strict accordance with NAVSEA 5100-003D standards. This compliance obligation must be thoroughly documented and submitted as part of the deliverables, ensuring the product meets stringent hazardous substance controls mandated by naval specifications. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses certified by the SBA, and falls under NAICS code 541380, indicating it involves scientific and technical consulting services related to environmental and regulatory compliance. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, leaving a limited window for proposal submissions. Performance is to be carried out at the New Cumberland facility, Pennsylvania, with a zip code of 17070-5002, and is overseen by the Department of Defense through its DDSP New Cumberland Facility. Although no point of contact is listed, all inquiries and submissions must be directed through the designated DIBBS portal linked in the posting. Failure to meet the mercury-free verification requirement or miss the deadline will render the submission non-compliant and ineligible for award.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Specialized Freight and Government Delivery LogisticsThis contract involves the specialized transportation of packaged valves from the origin point to the DDSP New Cumberland, PA facility under FOB Origin terms, placing responsibility on the buyer for all costs and risks once the goods leave the seller’s location. The shipment must comply with WAWF-compliant tracking requirements to ensure full visibility and accountability throughout the logistics chain. The solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses certified by the SBA are eligible to respond. It falls under NAICS code 484220, categorizing it as a truck transportation service for specialized freight. The contract was posted on August 3, 2026, with a response deadline of August 14, 2026, and is issued by the Department of Defense through the DDSP New Cumberland Facility, with the place of performance located at zip code 17070-5002.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Safety Data SupportThe contract requires strict adherence to OSHA Hazardous Communications Standard for all hazardous materials contained in or on the valve, mandating the accurate generation and provision of Safety Data Sheets in full compliance with Clause 252.223-7001. This includes identifying, classifying, and documenting chemical hazards associated with the product and ensuring complete, up-to-date SDS documentation is available for government review and use. The work is structured as a small business set-aside under the SBA program with NAICS code 541690, indicating it targets specialized scientific and technical services. The place of performance is designated as New Cumberland, Pennsylvania, and the contracting activity is the Department of Defense’s DDSP New Cumberland Facility. Responses must be submitted by the deadline of August 14, 2026, with solicitation details accessible through the DIBBS platform.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military-Grade Packaging and Labeling ServicesThis contract solicits specialized packaging, labeling, and palletization services for valves in full compliance with Department of Defense logistics standards, specifically DLA and MIL-STD-129 requirements. The work involves preparing military-grade components for secure, standardized handling and distribution across government supply chains, ensuring every unit is properly marked, packaged, and arranged on pallets to meet federal military specifications for inventory tracking and operational readiness. All services must be performed at the designated performance location in New Cumberland, Pennsylvania, with zip code 17070-5002, and must adhere strictly to the technical and procedural guidelines mandated by DLA for defense logistics. The contract is structured as a subcontract and is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, meaning only certified small business entities are eligible to bid. It falls under NAICS code 493190, which classifies it within warehousing and storage services not elsewhere classified, emphasizing the logistical nature of the work. The opportunity was posted on August 3, 2026, and responses must be submitted by August 14, 2026. The contracting authority is the DDSP New Cumberland Facility, operating under the Department of Defense, and all interested parties must engage through the official DIBBS platform using the provided solicitation link to submit proposals.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
Precision Valve Manufacturing and AssemblyThe contract requires the precision manufacture and final assembly of a regulating valve specifically designed for gaseous oxygen service, with strict adherence to MIL-STD-1330 for cleaning procedures and MIL-STD-2073-1E for packaging standards to ensure safety and compatibility in high-oxygen environments. All work must be performed in compliance with rigorous military specifications to guarantee the valve's reliability, purity, and performance under critical operational conditions. The project is classified as a subcontract under a Total Small Business Set-Aside, indicating that only small businesses as defined by the SBA are eligible to respond, with the NAICS code 332912 confirming the focus on other fabricated metal product manufacturing. The solicitation was posted on August 3, 2026, with a firm response deadline of August 14, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity originates from the Department of Defense, specifically the DDSP New Cumberland Facility, which oversees defense-related manufacturing and logistics. The contract is accessible through the DIBBS system under the reference number SPE7MC26T164V, and while no point of contact is provided, interested small businesses must submit proposals prior to the deadline to be considered for award, emphasizing the importance of timely and fully compliant submissions.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details