Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CAP, PROTECTIVE, DUST AN

Active
SPE7LX-26-U-9903Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 361 protective dust and moisture seal caps under NSN 5340-01-579-6248. The contract is designated as a total small business set-aside under NAICS code 332722. Delivery is required within 116 days after receipt of order. The agreement mandates compliance with specific technical and quality standards, including DLA packaging requirements and MIL-STD-130N for the identification marking of U.S. military property. It also specifies the removal of government identification from any supplies that are not accepted. The solicitation was posted on September 2, 2026, with a response deadline of September 17, 2026.

General Info

DoD small business set-aside for 361 protective seal caps delivered within 116 days.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

USA

Set-Aside

SBA

Documents

(1)

SPE7LX-26-U-9903.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUSA
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAP,PROTECTIVE,DUST AND MOISTURE SEAL
CAP,PROTECTIVE,DUST
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY ADEQUATE DATA FOR NSN/Part Number: 5340-01-579-6248 Quantity: 361 EA Purchase Request: 1000242350QTY: 361 Delivery: 116 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-U-3665
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 2,490 blind and solid rivets under National Stock Number 5320-01-620-4782. The contract is designated as a total small business set-aside under NAICS code 332722. Delivery is required within 94 days after receipt of the order. The procurement is subject to specific technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. All items must adhere to MIL-STD-130N for the identification marking of U.S. military property. Responses to solicitation SPE4A6-26-U-3665 are due by September 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
COLLAR, PIN-RIVET
Solicitation # SPE4A6-26-T-22GC
The Defense Logistics Agency under the Department of Defense has issued solicitation SPE4A6-26-T-22GC for the procurement of 1,797 units of pin-rivet collars, identified by NSN/Part Number 5320-00-298-6212. This federal requirement is tracked under purchase request 7017917131. The solicitation was posted on August 25, 2026, with a response deadline set for September 2, 2026. Interested parties can find further details and submit responses through the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3619
This contract is a solicitation for the procurement of 2,221 machine bolts under NSN 5306-01-686-4912. The requirement is a total small business set-aside issued by the Department of Defense ASC Commodities Division. Delivery is required within 78 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The technical specifications follow ASME B18.24 Revision D and must adhere to the DLA Master List of Technical and Quality Requirements. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Packaging must be performed according to ASTM D3951 and MIL-STD-129, with palletization following the RP001 DLA packaging requirements.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
BOLT, EXTERNALLY RELIEV
Solicitation # SPE4A6-26-U-3703
This contract is for the procurement of 409 externally relieved hexagon head bolts, identified by NSN 5306014725391 and part number FTC 7590-3. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-U-3703 and is designated as a set-aside for Economically Disadvantaged Women-Owned Small Businesses. The items are classified as critical application items with a delivery requirement of 99 days and a strict zero percent quantity variance. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific protocols for source approval, packaging, and the removal of government identification from non-accepted supplies. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A6-26-U-3937
This contract is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 1,475 plain studs under solicitation number SPE4A6-26-U-3937. The items are identified by NSN 5307-01-145-1645 and are associated with part numbers from Parker Hannifin Corporation and Oshkosh Defense LLC. This is a total small business set-aside under NAICS code 332722, with delivery required within 40 days after receipt of order. The agreement specifies that delivery is FOB Origin, while inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with specific adherence to DLA packaging requirements for procurement. The contract incorporates technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
RIVET, SOLID
Solicitation # SPE4A6-26-U-3862
This contract is for the procurement of 1,681 solid rivets, identified by NSN 5320-00-574-1091 and part number MS20470AD4-28. The items must adhere to technical specifications NASM20470 Revision 3 and NASM5674 Revision 2. This is a total small business set-aside under NAICS code 332722, managed by the Defense Logistics Agency ASC Commodities Division. Delivery is required within 37 days after the order, with FOB, inspection, and acceptance all occurring at the origin. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA packaging requirements. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. The contract incorporates various DLA master list technical and quality requirements, including specific mandates for bare item marking and the removal of government identification from non-accepted supplies.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-U-3675
Contract SPE4A6-26-U-3675 is a federal solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 180 machine screws. The items are identified by NSN 5305015292168 and part number 4131603-2 from Trivent Engineering, Inc. This is designated as a critical application item and a commercial item, with delivery required within 83 days after the order is placed. The shipping terms are FOB Origin, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Identification marking must comply with MIL-STD-130N. Technical and quality requirements are governed by the DLA Master List, and the procurement includes a zero percent quantity variance. The primary point of contact for this acquisition is Faye Harvell.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-U-3728
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 5,574 shear bolts under NSN 5306-00-343-1410. The contract is a total small business set-aside under NAICS code 332722 and is being procured as fully competitive in accordance with military and federal specifications. Delivery is required within 84 days after the order is placed. The agreement incorporates several technical and quality requirements, including specific DLA packaging standards and tailored higher-level quality requirements for both manufacturers and non-manufacturers. Key stipulations include inspection and acceptance at the origin, physical identification and bare item marking, and the removal of government identification from any non-accepted supplies. Responses to solicitation SPE4A6-26-U-3728 are due by September 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SPLIN
Solicitation # SPE4A6-26-T-26BX
This contract is for the procurement of 5,359 self-locking spline nuts under NSN 5310010540004. The items are identified as commercial products, with specific part numbers associated with Huck International, Inc. and Fastener Technology Corp. Delivery is required within 46 days after the order, with a final required delivery date of May 28, 2027, shipping FOB Origin to the DLA Distribution Depot at Hill AFB, Utah. Compliance requirements include CMMC Level 2 self-assessment and adherence to Covered Defense Information standards. Quality control must follow MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must comply with ASTM D3951 and MIL-STD-129. The contract is designated as a HUBZone set-aside under NAICS code 332722 and is managed by the Department of Defense ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-U-3638
This contract is for the procurement of 152 machine screws, identified by NSN 5305015316659 and part number SUB-HSC-2070-1, awarded to Trijicon Inc. The agreement specifies a delivery timeframe of 39 days with FOB Origin shipping and destination-based inspection and acceptance. The supplier must adhere to strict quality and security standards, including CMMC Level 2 self-assessment, MIL-STD-130N for identification marking, and ASTM D3951 for packaging. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, and the item is designated as a critical application item. All technical and quality requirements are governed by the DLA Master List.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-U-3582
This solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-U-3582, is for the procurement of 1,543 close tolerance shear bolts with NSN 5306-01-100-6948. The contract is a total small business set-aside under NAICS code 332722, with a required delivery timeframe of 71 days after order. The agreement is subject to several strict technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Notably, the contract involves covered defense information and technical data subject to ITAR and EAR export controls. Access to this data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-control training.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-26BW
This contract is for the procurement of 164 close tolerance screws, identified by NSN 5305-01-539-5971. The order is designated as a critical application item and lists several approved manufacturers and part numbers, including those from Fastener Innovation Technology, The Boeing Company, and Howmet Global Fastening Systems. Delivery is required within 171 days, with a need date of March 1, 2027, and shipment is to be delivered FOB origin to DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to DLA technical and quality requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331. Quality assurance involves inspection and acceptance at the origin, with a zero percent quantity variance allowed. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements for procurement.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 333618
New
DIBBS
PARTS KIT, DIESEL ENGIN
Solicitation # SPE7LX-26-U-9420
This Request for Quotations, issued by DLA Land and Maritime under solicitation number SPE7LX-26-U-9420, is for an Indefinite Delivery Contract (IDC) to procure diesel engine parts kits specifically for Geislinger couplings. The procurement involves an estimated quantity of 6 kits under National Stock Number 2815-01-547-7099, with a maximum contract value of $350,000. This is a one-year contract below the Simplified Acquisition Threshold, where the quantity provided is an estimate and does not constitute a firm commitment. Delivery is required within 88 days on an FOB Origin basis, with both inspection and acceptance occurring at the destination. The contract incorporates rigorous technical, quality, and packaging standards, including compliance with MIL-STD-2073-1E for kit packaging and MIL-STD-129 for marking. Contractors must adhere to strict domestic sourcing requirements, such as the Buy American Act and the Berry Amendment, and are required to disclose the use of any non-domestic materials. Additionally, the solicitation mandates compliance with cybersecurity protocols for safeguarding covered defense information and requires proper labeling of hazardous materials in accordance with the Hazard Communication Standard. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.
Other Engine Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332311
New
DIBBS
JACK, TRANSPORTABLE
Solicitation # SPE7LX-26-U-9624
The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7LX-26-U-9624 for the procurement of 12 transportable jacks. The items are identified by NSN/Part Number 2540-01-558-8128 and are associated with purchase request 1000240015. This federal solicitation was posted on August 18, 2026, with a response deadline set for September 2, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.
Prefabricated Metal Building and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7LX-26-U-9909
This contract, identified as SPE7LX-26-U-9909, is a solicitation by the Department of Defense Strategic Acquisition Program Directorate for the procurement of 20 units of loop clamps. The items are identified by NSN 5340-01-481-8178 and part number 23-12231-004 from Daimler Truck North America LLC. This is a total small business set-aside under NAICS code 332510, with a delivery requirement of 116 days after order. The agreement specifies that delivery is FOB Origin, while both inspection and acceptance will occur at the destination. Packaging must adhere to DLA packaging requirements and MIL-STD-129 for marking and labeling, with specific instructions to follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. All technical and quality requirements are governed by the DLA Master List.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333618
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9621
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate under solicitation number SPE7LX-26-U-9621, seeks quotations for O-rings identified by NSN 5331-01-728-5808. The requirement is for an estimated annual quantity of 195 units, with a guaranteed minimum of 29 units and a minimum order quantity of 48 units. The contract is structured as a one-year indefinite delivery/indefinite quantity agreement with a maximum value of 350,000 dollars and a delivery timeline of 95 days after receipt of order. This opportunity is designated as a total small business set-aside under NAICS code 333618. The contract is subject to stringent technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. It mandates compliance with Cybersecurity Maturity Model Certification Level 2 and specifies that covered defense information applies. Furthermore, the technical data is subject to export controls under ITAR or EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data.
Other Engine Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
DIBBS
NOZZLE, STARTER FUEL
Solicitation # SPE7LX-26-U-9592
This contract solicitation, identified as SPE7LX-26-U-9592, is issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of starter fuel nozzles used on CH-47 Chinook helicopters. The requirement is for an estimated quantity of 55 units under NSN 2910009192022, with approved part numbers including Collins Engine Nozzles Inc 970-2 and RTX Corporation 915914C1. This is a total small business set-aside under NAICS code 336412, and the solicitation may result in a one-year indefinite delivery contract below the simplified acquisition threshold. Key delivery and quality terms specify a delivery window of 74 days after order, with shipping handled FOB Origin and inspection and acceptance occurring at the destination. The items are designated as critical application items and must adhere to strict technical and quality requirements, including DLA packaging requirements and MIL-STD-129 labeling. Packaging must comply with ASTM D3951, though DLA Master List requirements take precedence. The solicitation was posted on August 18, 2026, with a response deadline of September 2, 2026.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAINER
Solicitation # SPE7LX-26-U-9888
This contract, identified as solicitation SPE7LX-26-U-9888, is for the procurement of 149 units of a critical application item, part number 060005426 from Saint-Gobain Performance Plastics, under NSN 5330014078189. The delivery is required within 97 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to technical and quality requirements, including MIL-STD-130N for identification marking and a total prohibition of asbestos. Specific packaging instructions require the use of medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent deterioration from ultraviolet rays. All palletization and marking must comply with DLA packaging requirements and MIL-STD-129, while hazardous materials must follow IP025 guidelines.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9886
This solicitation is for the procurement of 245 units of plain encased seals, identified by NSN 5330-01-170-2933. The contract is issued by the Department of Defense under the Strategic Acquisition Program Directorate with a delivery requirement of 74 days after receipt of order. The item is classified as a commercial product and must adhere to MIL-STD-130N for identification marking of U.S. military property. Compliance with specific technical and quality requirements is mandatory, including DLA packaging standards and the removal of government identification from non-accepted supplies. Suppliers must be approved sources according to the current source control drawing or obtain OEM approval. Additionally, the contract strictly prohibits the intentional addition of mercury or the use of asbestos in the supplied hardware, requiring adherence to NAVSEA 5100-003D guidelines.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 326291
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9894
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 247 plain encased seals under NSN 5330-01-312-4792. The contract requires delivery within 98 days after the order is placed. All supplied items must be free of asbestos, and any alternative materials must be approved according to specific regulatory clauses. Compliance requirements include adherence to CMMC Level 2 certification for third-party assessment and the protection of covered defense information. The supplier must follow DLA packaging requirements, MIL-STD-130N for identification marking of military property, and ensure the removal of government identification from any non-accepted supplies. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements.
Rubber Product Manufacturing for Mechanical Use

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7LX-26-U-9596
Contract SPE7LX-26-U-9596 is a solicitation issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of battery chargers, specifically Panasonic Industrial Co part number FZ-VCBG21M, identified by NSN 6130-01-708-6325. The requirement is for an estimated quantity of 196 units, with a delivery timeframe of 127 days and shipping terms set as FOB Origin. This is a commercial off the shelf item procurement with inspection and acceptance occurring at the destination. The contract adheres to strict quality and packaging standards, incorporating DLA packaging requirements RP001 and marking standards per MIL-STD-129. Sampling methods must comply with MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes. Technical and quality requirements are governed by the DLA Master List, and the procurement is managed under a unilateral indefinite quantity and indefinite delivery structure.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7LX-26-U-9887
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 515 gaskets under part number 5330-01-140-2817. The contract requires delivery within 99 days after the order is placed. Technical and quality standards are governed by the DLA Master List, with specific adherence to packaging requirements and the removal of government identification from non-accepted supplies. The contract mandates strict environmental and material compliance, prohibiting the use of Class I ozone-depleting chemicals, asbestos, and the intentional addition of mercury or mercury-containing compounds, except where functionally required. Additionally, because the items are subject to deterioration from ultraviolet rays, they must be sealed in medium duty, waterproof, greaseproof, opaque bags according to MIL-DTL-117 standards.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9891
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 41 plain encased seals under part number 5330-01-161-4070. The contract requires delivery within 139 days after receipt of order and adheres to specific DLA packaging and identification marking standards, including MIL-STD-130N. Contractors must comply with strict environmental mandates prohibiting the use of Class I ozone depleting chemicals and must follow the technical and quality requirements outlined in the DLA master list. Security and compliance are critical components of this agreement, requiring CMMC Level 2 certification and adherence to regulations regarding covered defense information. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires to access the data. The solicitation is listed under NAICS code 339991 with a response deadline of September 17, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9634
The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of 1,445 plain seals under NSN 5330015695966. This is a total small business set-aside opportunity under NAICS code 332722. The procurement may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 216 units, with an estimated two orders per year. Delivery is required within 83 days after receipt of order to various CONUS and OCONUS DLA depots. Interested sources must submit their quotes electronically by the deadline of September 2, 2026. All specifications and the full RFQ are available through the provided electronic links, as hard copies and separate drawings are not available.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details