Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CAP, PROTECTIVE, DUST

Active
SPE7L1-26-T-855QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 96 units of protective dust and moisture seal caps with NSN/Part Number 5340-01-466-1897 under solicitation SPE7L1-26-T-855Q. The requirement is set for delivery within 188 days after order and is classified as full and open competition. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item must comply with strict environmental restrictions, prohibiting all Class I ozone-depleting chemicals, and any substitute materials must be pre-approved unless explicitly authorized by specifications. Export control regulations apply due to the presence of technical data governed by ITAR or EAR, restricting disclosure to foreign persons and requiring DLA-approved contractors to complete mandatory training, hold a valid US/Canada Joint Certification Program status, and pass a DLA questionnaire before access is granted. Cybersecurity requirements mandate compliance with CMMC Level 2 self-assessment, and the contract is subject to DFARS 252.225-7048 for controlled data handling. All supplies must be cleared of government identification if not accepted. The solicitation was posted July 20, 2026, with responses due by July 31, 2026, and performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002.

General Info

Procure 96 dust and moisture seal caps under ITAR/EAR, CMMC Level 2, DFARS, with export controls and DLA training required.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332313 - Plate Work ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-855Q for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
ISABELLE SZULEWSKI
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAP,PROTECTIVE,DUST
CAP,PROTECTIVE,DUST AND MOISTURE SEAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
FULL AND OPEN COMPETITION APPLY
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the
SPE7L1-26-T-855Q
SECTION B
export-controlled data. NSN/Part Number: 5340-01-466-1897 Quantity: 96 EA Purchase Request: 7017562450QTY: 96 Delivery: 188 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332313
New
DIBBS
Hex Cap Screw Manufacturing and Supply for DLA ContractThe contract requires the manufacture or supply of precisely 1,000 units of Hex Cap Screws identified by NSN 5305-01-552-7927 under CLIN 0001 for the Defense Logistics Agency under the Department of Defense. Each unit must comply with either MIL-SPEC or ANSI standards, ensuring rigorous quality and performance benchmarks. Full traceability of materials and production processes is mandatory to guarantee compliance and accountability throughout the supply chain. The work is being executed as a subcontract under a larger DLA Land and Maritime agreement, with the North American Industry Classification System code 332313 indicating the scope falls within the forging and stamping industry. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s delivery and certification requirements, though specific location or point of contact details are not provided.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 332313
New
DIBBS
Precision Fastener Manufacturing & SupplyThe contract calls for the manufacture and supply of 1,976 flat washers designated by NSN 5310001770978, all of which must fully comply with NASM25440 Revision NR 1 specifications and be marked in accordance with MIL-STD-130N standards. Quality control requires adherence to zero-defect sampling protocols, ensuring every unit meets stringent military-grade tolerances and traceability requirements. Production and delivery are targeted for performance at Tracy, California, with the specified zip code indicating the exact delivery point. Issued under the NAICS code 332313 for screw, nut, and bolt manufacturing, this subcontract is managed by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and all bids must be submitted through the DIBBS platform. The contract emphasizes precision, compliance, and timely delivery, with no set-aside provisions applied, meaning any qualified supplier may respond. Performance obligations are tied to exact technical specifications and military marking guidelines, with failure to meet these criteria resulting in rejection.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332313
New
DIBBS
Precision Fastener Supply – Hex Cap ScrewsThe contract entails the supply of 30 units of SCREW, CAP, HEXAGON H with National Stock Number 5305-01-694-1963, a military specification compliant fastener designed for critical applications in defense and aerospace systems. The item is governed by strict performance and quality standards to ensure reliability under demanding operational conditions. This is a subcontract issued under the auspices of the Defense Logistics Agency, a component of the Department of Defense, with the North American Industry Classification System code 332313 indicating the manufacturer’s involvement in forged, stamped, and machined metal product production. The contract was posted on July 20, 2026, and while details regarding the point of contact, place of performance, or set-aside status are unspecified, the procurement is linked to the DIBBS system via the award identification SPE4A626PE550, confirming its formal processing within the DLA’s contracting framework.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 332313
New
DIBBS
Insulator Plate Supply (Electrical Components Manufacturing)The contract involves the manufacture and supply of 72 insulator plates with NSN 5970-00-345-9713, manufactured to meet military specifications, ensuring technical compliance and reliability for defense applications. The contractor is responsible for complete production, including proper packaging and labeling in accordance with military standards, and must deliver the full quantity to the DLA Distribution Depot at Tinker Air Force Base in Oklahoma. The work falls under NAICS code 332313, indicating it is classified within the Electrical Equipment and Component Manufacturing sector, and is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense. The contract was posted on July 20, 2026, and is identified by the contract number SPE4A726PB793, with performance requirements centered on meeting exacting military quality and logistical standards for timely delivery.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 332313
New
DIBBS
Fastener Supply – Hex Head Cap ScrewsThe contract pertains to the supply of six standardized hex head cap screws identified by the National Stock Number 5305016187008, which must meet all applicable military specifications. The requirement is issued under the NAICS code 332313 and classified as a subcontract, with performance located at Fort Stewart, Georgia, in the zip code 31314-0000. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, with no set-aside preferences indicated. The contract is managed by the Land Supply Chain under the Department of Defense, and all units must comply strictly with military standards for quality, materials, and delivery. The official solicitation can be accessed via the DIBBS portal using the provided link.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332313
New
DIBBS
Marine Anchor Manufacturing and AssemblyThe contract requires the manufacture, proof testing, and delivery of three marine fluke anchors in full compliance with military specifications, ensuring rigorous adherence to quality and performance standards. Each anchor must undergo comprehensive inspections including magnetic particle testing, chemical analysis, and physical examination to verify material integrity and structural soundness, with additional strict requirements for mercury containment to meet environmental and safety protocols. The work must be executed by a certified small business as this is a Total Small Business Set-Aside under SBA guidelines, and the NAICS code 332313 identifies the scope as forge and stamping manufacture. All deliverables are expected to be completed and submitted by the response deadline of July 31, 2026, under the oversight of the Department of Defense’s Fluid Handling Division, with performance likely tied to specified military operational environments despite undefined location details.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332313
New
DIBBS
CNC Machining and Tooling for Industrial PatternsThe contract pertains to the production of industrial patterns or molds for casting or forming panel assemblies, with potential involvement in prototype development, utilizing CNC machining and tooling capabilities. The work falls under NAICS code 332313, which classifies it within the foundry and machine shop sector, and is structured as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency. The solicitation was posted on July 20, 2026, and the performance location is not specified, indicating flexibility or confidentiality regarding where the work will be executed. The contract is linked to a specific award record through a DIBBS portal URL, suggesting it is part of an official defense procurement process. There is no set-aside designation provided, implying it is open to all qualified contractors without restriction based on business size or other categories.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 332313
New
DIBBS
Supply of Flat Washers (NSN 5310-01-488-2265) per NAS 80205The contract requires the manufacture and supply of 48 flat washers meeting the NAS 80205 specification, with each unit fully traceable through documented production and material sources. Packaging must comply with DLA RP001 standards and be labeled according to MIL-STD-129 requirements, ensuring uniformity and readiness for military logistics systems. The items are identified by National Stock Number 5310-01-488-2265 and are subject to inspection by government representatives upon delivery at the designated destination. The work falls under NAICS code 332313, indicating classification within the forged steel and screw machine product manufacturing sector, and the contract is issued under the Defense Logistics Agency on behalf of the Department of Defense.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 332313
New
DIBBS
Manufacture of Aircraft Baffle PlatesThe contract involves the fabrication and delivery of five Aircraft Baffle Plates identified by NSN 1660-00-609-4205, manufactured to meet precise technical specifications outlined by the Defense Logistics Agency under the Department of Defense. Each unit must be produced using approved materials with full certification provided, and all components must be preserved, packaged, and marked in strict compliance with ASTM D3951 and DLA standards to ensure durability, traceability, and operational readiness. The work falls under NAICS code 332313, indicating specialized manufacturing services for aircraft parts, and is structured as a subcontract within the broader defense procurement framework. All deliverables are required to be fully compliant with federal defense logistics protocols, with no set-aside provisions specified, meaning the contract is open to qualified contractors regardless of business size or ownership type. The solicitation was posted on July 20, 2026, and performance will be executed under the official contract number SPE4A626PX839, with all documentation and quality assurance measures aligned to DLA’s operational and supply chain requirements.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 332313
New
DIBBS
CAP-PLUG, PROTECTIVE, DUThe contract specifies the procurement of protective dust and moisture seal caps, identified by the NSN 5340-01-465-3974 and part number CEP-08, supplied by multiple approved vendors including Telephonics Corp, Caplugs LLC, and NRD LLC. A total of 36,498 units are required across two delivery lines, with quantities of 11,274 and 25,224 units respectively, each priced per unit and delivered FOB origin under strict quantity variance controls of plus or minus zero percent. Delivery must occur within 155 days of contract award, with inspection and acceptance points set at the destination. Packaging must comply with MIL-STD-2073-1E, marking to MIL-STD-129, and palletization per DLA’s packaging requirements. The items are classified as a critical application item, and all packaging, marking, and shipping for hazardous materials must adhere to IP025 standards. The contract references the DLA Master List of Technical and Quality Requirements for applicable specifications, and the unit of issue is the Eastern Area. Shipping instructions are directed to two DLA distribution facilities—Warner Robins AFB and New Cumberland PA—with specific parcel post and freight addresses provided. The original required delivery date is March 3, 2027, with need ship dates set for March 8, 2027, and July 9, 2026, respectively, under solicitation SPE7M4-26-T-240Y issued by the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332313
New
DIBBS
SWITCH, SENSITIVEThis contract, issued under solicitation number SPE7M8-26-T-5275 by the Department of Defense’s Electrical Devices Division, outlines the procurement of 13 units of a sensitive switch identified by NSN 5930016576492, with a required delivery date 168 days after award. The item must be delivered FOB origin, with zero variance in quantity, and is subject to inspection and acceptance at the destination location specified as W62G2T, W1A8 DLA DIST SAN JOAQUIN, Tracy, CA 95304-5000. All packaging must adhere to MIL-STD-2073-1E with packaging code U, preservation method 41 (clng/dry), and intermediate container DO, while final marking complies with MIL-STD-129 and includes no special markings. Palletization must meet DLA’s RP001 packaging requirements. The contract incorporates technical and quality requirements from the DLA Master List and mandates compliance with hazardous materials labeling under 29 CFR 1910.1200 and specific provisions for radioactive materials exceeding thresholds of 0.002 microcuries per gram or 0.01 microcuries per item, requiring prior written notification to the Contracting Officer. Transportation follows DLAD Proc Note C19 for general shipment and C20 for first destination, with payment processed exclusively through WAWF using electronic invoicing. The contract is fixed price and includes numerous FAR and DFARS clauses relating to employment equity, trafficking in persons, cybersecurity safeguards, export control, prohibitions on Chinese military company items, whistleblower rights, and secure handling of government information. Special clauses require adherence to NIST SP 800-171 for safeguarding covered defense information, mandatory compliance with DFARS 252.204-7012 for cyber incident reporting, and restrictions on the use of hexavalent chromium and toxic material disposal. All subcontractors must flow down applicable requirements, and the contractor must maintain current SAM.gov registrations and provide UEI and CAGE codes for compliance with socioeconomic and security provisions. Payment authority is tied to the DD 1155 form, and all delivery documentation must be submitted electronically via WAWF. The solicitation closed on July 23, 2026, with award anticipated shortly thereafter.
ELECTRICAL DEVICES DIV

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332313
New
DIBBS
Supply of Flat Washers (NSN 5310013926483)The contract calls for the procurement and delivery of 200 flat washers identified by NSN 5310013926483, which are commercial off-the-shelf items meeting military specifications with no assembly, installation, or service requirements. The solicitation is classified as a subcontract under NAICS code 332313 and is being managed by the ASC Commodities Division within the Department of Defense. The posting date is July 19, 2026, and responses must be submitted by July 27, 2026, with no set-aside provisions applicable. The place of performance and point of contact details are not specified, and the complete solicitation can be accessed via the provided DIBBS link.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 541611
New
DIBBS
Small Business Subcontracting & Socioeconomic Compliance SupportThe contract seeks support for small business representation, certification under programs such as WOSB, SDVOSB, and HUBZone, and the structuring of joint ventures to ensure full compliance with federal socioeconomic regulations. Providers will assist government contractors and subcontractors in navigating complex certification requirements, maintaining eligibility, and adhering to reporting and documentation standards necessary for participation in set-aside programs. The scope includes ongoing guidance on regulatory changes, audit readiness, and strategic alignment with procurement goals tied to small business utilization. Performance is required at Pineville, Louisiana, with a response deadline of July 31, 2026, and the solicitation falls under NAICS code 541611 for management consulting services. The contracting organization is the Department of Defense through the Land Supply Chain office. While the exact award mechanism or funding details are not specified, the nature of the work implies an ongoing advisory or consulting engagement rather than a traditional deliverable-based contract. All proposers must demonstrate proven experience in federal small business certification processes and a deep understanding of Defense Acquisition Regulations and socioeconomic compliance frameworks.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity & Covered Defense Information SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 controls to safeguard covered defense information and ensure compliance with cyber incident reporting requirements. This subcontract is issued under the Department of Defense’s Land Supply Chain and is focused on securing sensitive data within the defense supply chain by enforcing standardized cybersecurity practices outlined in the NIST framework. The place of performance is designated as Pineville, Louisiana, with a zip code of 71360-3737, indicating the geographic scope of the work. Proposals must be submitted by July 31, 2026, and the solicitation is categorized under NAICS code 541512, which corresponds to Computer Systems Design and Related Services. The work involves both initial deployment and continuous monitoring of security measures to meet federal requirements for protecting controlled unclassified information and promptly reporting any cyber incidents.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive identification, classification, and documentation of hazardous materials to ensure full compliance with OSHA and DFARS regulations. This includes the accurate authoring and timely submission of Safety Data Sheets (SDS) for all identified substances, with strict adherence to federal safety and reporting standards. The work must support the Department of Defense’s supply chain operations by maintaining rigorous hazardous materials management protocols, ensuring that all documentation meets the legal and operational requirements for handling, storage, and transportation of dangerous goods. Performance of this subcontract is designated for Pineville, Louisiana, under the NAICS code 541620, which pertains to environmental consulting services. Responses are due by July 31, 2026, following a posting date of July 20, 2026. The contract falls under the scope of the Land Supply Chain organization within the Department of Defense, emphasizing its critical role in military logistics and safety compliance. All activities must align with federal defense acquisition regulations, and failure to meet SDS submission deadlines or classification standards may result in non-compliance penalties or contract termination.
Environmental Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
Supply of Mechanical Housing Unit (NSN: 3040-01-519-2481)The contract requires the manufacture or sourcing, packaging, labeling, and delivery of a mechanical housing unit identified by NSN 3040-01-519-2481, with full compliance to DLA specifications, ASTM D3951 for packaging of military materiel, and MIL-STD-129 for military labeling requirements. All work must be performed to meet stringent defense standards for durability, identification, and logistics handling, ensuring seamless integration into military supply chains. Packaging and labeling must include appropriate barcodes, part numbers, and handling instructions as mandated by federal military guidelines. The solicitation is structured as a subcontract under the NAICS code 333613, which corresponds to other engine equipment manufacturing, and falls under the Department of Defense’s Land Supply Chain organization. The place of performance is designated as Pineville, Louisiana, with a ZIP code of 71360-3737. Proposals are due by July 31, 2026, following a posting date of July 20, 2026. While no set-aside type is specified, bidders must be prepared to demonstrate capability in fulfilling defense-grade production and logistical demands with precise adherence to technical and procedural requirements.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
Technical Data Packaging and Marking ComplianceThe contract requires technical and quality assurance support to ensure all items meet military packaging and marking standards, specifically MIL-STD-129, MIL-STD-130N, and MIL-STD-2073-1E, to guarantee proper identification, handling, and logistics tracking throughout the supply chain. This subcontract is focused on compliance with Department of Defense requirements and will be executed at the place of performance in Greensboro, North Carolina, with a zip code of 27409. The work involves verifying that all materials are labeled, packaged, and documented in full accordance with the specified military standards to maintain operational readiness and supply chain integrity. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a narrow window for proposers to submit their qualifications. The NAICS code 541380 classifies this as a professional, scientific, and technical services contract, emphasizing technical expertise over general labor or manufacturing. The agency responsible is the Department of Defense under the Land Supply Chain organization, and the contract is specifically designated as a subcontract, meaning it supports a larger procurement effort. All work must be completed with precision and traceability to meet the stringent demands of military logistics and inventory systems.
Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Handling and Compliance SupportThis contract requires full compliance with federal and defense regulations pertaining to the safe handling, labeling, and documentation of hazardous materials, with specific emphasis on ocean transport of hazardous cargo. The contractor must implement and maintain rigorous protocols to ensure adherence to all applicable laws and standards governing hazardous material operations, including proper identification, packaging, marking, placarding, and recordkeeping throughout the supply chain. All activities must align with Department of Defense requirements and international maritime safety guidelines to mitigate risk and ensure operational continuity. The work is performed as a subcontract under the agency name LAND SUPPLY CHAIN, part of the Department of Defense, with the place of performance located in Greensboro, North Carolina, 27409. The contract falls under NAICS code 541690, indicating it involves other scientific and technical consulting services, suggesting a focus on advisory, compliance, and procedural support rather than direct logistics or transportation. Responses are due by July 31, 2026, and the opportunity was posted on July 20, 2026, through the DLA DIBBS platform. No set-aside provisions are specified, and the contract is open to eligible subcontractors seeking to support defense-related hazardous materials compliance efforts.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
Helical Compression Spring Manufacturing and SupplyThe contract calls for the manufacture and supply of eight helical compression springs designated by NSN 5360-01-605-8091 and part number 160-15-12, with full compliance to Department of Defense technical standards governing material composition, dimensional tolerances, load characteristics, and surface finish. All units must adhere strictly to packaging and marking requirements as defined by DLA, including proper labeling, traceability codes, and handling instructions, while also complying with all applicable hazardous material restrictions to ensure safe transport and storage. The springs are intended for use within military logistics systems and must be delivered in a configuration ready for immediate integration without additional modification. The solicitation is classified as a subcontract under NAICS code 332722, with a response deadline of July 31, 2026, and a posting date of July 20, 2026. The place of performance is specified as Greensboro, North Carolina, with a zip code of 27409, indicating where final delivery and acceptance will occur. The contracting authority is the Land Supply Chain under the Department of Defense, though no specific point of contact or set-aside classification is provided. Bidders must ensure full alignment with DLA’s contractual and technical expectations, including documentation, quality assurance protocols, and adherence to federal supply chain security measures.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & SDS ManagementThe contract requires the identification, labeling, and submission of Safety Data Sheets for hazardous materials contained in supplied kits, ensuring full compliance with Occupational Safety and Health Administration and Department of Defense regulations. All SDS documentation must be accurately processed and delivered according to established federal standards, with strict attention to detail to maintain regulatory adherence and operational safety. The work is governed under NAICS code 541620 and is structured as a subcontract under the Land Supply Chain division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and performance is expected to align with DoD supply chain requirements, though specific performance locations are not detailed. While no set-aside preferences are indicated, the contract mandates precise documentation practices for hazardous material handling and reporting, underscoring the critical nature of safety and regulatory compliance in the delivery of kit components. All submissions must be made through the designated DIBBS platform using the provided solicitation number.
Environmental Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Kitting ServicesThe contract requires comprehensive packaging, preservation, unitization, and labeling services for mechanical parts kits in full compliance with Department of Defense and Defense Logistics Agency standards. All work must meet military specifications for durability, environmental protection, and traceability to ensure readiness and operational effectiveness across the supply chain. Services must be performed in accordance with established protocols for material handling, corrosion prevention, and secure packaging to safeguard components during storage and transit. This subcontract is categorized under NAICS code 493190 and is issued by the Land Supply Chain office within the Department of Defense. The solicitation was posted on July 20, 2026, with proposals due by July 31, 2026. Performance locations and specific delivery points are not detailed in the provided data, but compliance with DLA requirements for documentation, labeling, and unitization is mandatory. Interested parties must submit responses through the designated DIBBS platform prior to the deadline.
Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
Hydraulic Front Suspension Cylinder Kit SupplyThe contract calls for the supply of ten hydraulic front suspension cylinder kits, specifically designed to meet rigorous military standards in functionality and durability. All units must be packaged, marked, and documented in full compliance with federal military packaging and labeling regulations, including accurate hazardous material reporting to ensure safe handling and transportation throughout the supply chain. The work is categorized under NAICS code 332994, indicating specialized aerospace and defense component manufacturing, and is structured as a subcontract under the Department of Defense’s Land Supply Chain organization. Proposals must be submitted no later than July 31, 2026, with the solicitation posted on July 20, 2026, providing a ten-day window for response. Performance is expected to align with Defense Logistics Agency protocols, and all deliverables must adhere to the technical and administrative requirements outlined in the DIBBS RFQ system under reference number SPE7L126T853R.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
Linear Actuator Parts Kit SupplyThe contract awards the supply of ten linear actuator parts kits, identified by NSN 3040-01-167-2873 and part number 666-2331-07, under a subcontract arrangement with the Department of Defense through LAND SUPPLY CHAIN. All units must be packaged and labeled in strict compliance with military standards to ensure handling, storage, and operational readiness. Delivery is specified as FOB origin, meaning the supplier assumes responsibility until the goods are loaded at the point of origin, with final destination being Cairo, Egypt. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the NAICS code 333613 confirms the industrial classification for industrial machinery manufacturing. The contract is not set aside for any specific small business category and requires full adherence to defense logistics protocols without exception.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Commercial Item Logistics & FOB Destination DeliveryThe contract requires the transportation and delivery of TCOM-200-PUR-DB cable to Tobyhanna, PA, with a strict five-day deadline from the date of order placement, and delivery must be made under FOB destination terms, meaning the seller assumes all risks and costs until the goods arrive at the specified location. If the shipment involves sea transport, compliance with U.S.-flag vessel requirements is a potential condition that must be met, ensuring adherence to federal maritime regulations. The contract is classified as a subcontract under the NAICS code 484220, which pertains to truck transportation and related logistics services, and is managed by the Department of Defense through its LAND SUPPLY CHAIN organization. The place of performance is clearly identified as Tobyhanna, PA, with a zip code of 18466-5050, and the solicitation was posted on July 20, 2026, with responses due by July 31, 2026. All logistics must be executed to meet the government's delivery timeline and regulatory compliance standards without delay or deviation.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details