Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

CAP SCREW

Awarded

SPMYM226Q7841Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract award is for CAP SCREW under solicitation number SPMYM26Q7841, issued by the Department of Defense through DLA Maritime - Puget Sound, located in Bremerton, Washington. The procurement is set aside exclusively for small businesses under the SBA Total Small Business Set Aside classification, ensuring eligibility is restricted to businesses meeting Small Business Administration criteria. The North American Industry Classification System code 332722 identifies the industry as Machine Shops, and the item is required for performance at the same Bremerton location with a zip code of 98314. The primary point of contact for inquiries is Jack Edwards, reachable by phone at 360-813-9577 or via email at JACK.EDWARDS@DLA.MIL. The notice was posted on July 31, 2026, and further details can be accessed through the SAM.gov workspace link provided.

General Info

Small business set aside for CAP SCREW procurement by DLA Maritime in Bremerton, Washington.

Agency

Department Of Defense → DLA Maritime - Puget SoundView Agency

Contract Value

$56,875

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

Bremerton, WA, 98314, USA

Set-Aside

SBA

Awardee

FASTENER SOLUTIONS, INC.View Profile

Award Issued Date

07/31/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedJul 31

Award Notice

AwardedJul 31

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Maritime - Puget Sound

Contacts1 person available

OfficeBREMERTON, WA, 98314-5000, USA

Organization / Agency

Department Of Defense → DLA Maritime - Puget Sound

View Agency Profile

Office AddressBREMERTON, WA, 98314-5000, USA

Contacts

JACK EDWARDS

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=7c13188685a349168a664833ba91c3d7

Similar Contracts

Same NAICS industry code

Manufacturing of Mounting Plates (NSN: 5340-01-578-1311)The contract requires the precision manufacturing and delivery of 292 mounting plates identified by NSN 5340-01-578-1311, adhering strictly to military specifications. All units must comply with MIL-STD-130N marking standards and meet the Defense Logistics Agency’s Qualified Manufacturers List requirements to ensure quality and traceability. The work is classified as a subcontract under NAICS code 332722 and is set for performance at New Cumberland, Pennsylvania with a zip code of 17070-5002. The solicitation was posted on July 31, 2026, with responses due by August 7, 2026, allowing suppliers a limited window to submit proposals. The contracting authority is the Department of Defense through the Land Supply Chain organization, and the delivery must align with the stringent standards expected for defense-related components.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hexagon Head Cap Screw SupplyThe contract calls for the supply and delivery of 33 hexagon head cap screws identified by NSN 5305-01-241-6224, with strict adherence to military packaging and labeling standards to ensure compatibility and readiness for defense use. The requirement is issued under subcontract type, with a North American Industry Classification System code of 332722, indicating manufacturing of screw, nut, and bolt manufacturing. Performance of the contract is centered in Tracy, California, with a ZIP code of 95304-5000, and the ordering agency is the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 31, 2026, with responses due by August 5, 2026, providing a five-day window for submissions. All delivered items must meet exacting military specifications to ensure interoperability and quality control within defense logistics systems. The contract is accessible via the DIBBS portal for authorized bidders.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Welding Studs (NSN 5307-01-529-7683)The contract requires the manufacture or sourcing of 80 welding studs identified by NSN 5307-01-529-7683, adhering strictly to military specifications for packaging and marking. All items must be packaged in accordance with MIL-STD-2073-1E and labeled with MIL-STD-129 markings to ensure compatibility with Department of Defense logistics systems. Delivery is to be made to the Defense Logistics Agency facility in New Cumberland, Pennsylvania, under FOB Origin terms, meaning the responsibility for transportation and associated risks transfers to the government upon shipment from the supplier’s location. The request is issued under a subcontract type with a NAICS code of 332722, indicating the work falls within the category of cutlery, handtool, and hardware manufacturing. Proposals must be submitted by the deadline of August 5, 2026, with the solicitation posted on July 31, 2026, through the DIBBS system. The contracting activity is attributed to the Aviation Supply Chain under the Department of Defense.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Precision Hardware Manufacturing – Tapping ScrewsThe contract calls for the manufacture of 18 units of tapping screws conforming to military specification MS51869-25, requiring strict adherence to material composition, dimensional tolerances, and performance benchmarks established by the Department of Defense. Each unit must be properly marked in accordance with MIL-STD-130N to ensure traceability and compliance with federal procurement standards. The work is classified as a subcontract under NAICS code 332722 and is being managed by the ASC Commodities Division of the Department of Defense, with performance required at New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 31, 2026, and proposals must be submitted by August 5, 2026, with all responses directed through the DIBBS platform using the provided reference number.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Welding Studs (NSN 5307-01-529-7683)The contract seeks the manufacture and delivery of 201 units of welding studs identified by NSN 5307-01-529-7683, fully compliant with military specifications and technical standards. All items must meet rigorous quality and performance requirements, including proper packaging, labeling, and adherence to export control regulations to ensure secure handling and distribution. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The opportunity is structured as a subcontract under the NAICS code 332722, which corresponds to small arms, ordnance, and ordnance accessories manufacturing. The solicitation was posted on July 31, 2026, with a response deadline of August 5, 2026, indicating a short turnaround for qualified vendors to submit proposals. The contracting entity is the Aviation Supply Chain under the Department of Defense, emphasizing the critical nature of the components for military aviation systems.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

NUT, PLAIN, EXTENDED

Solicitation # SPE4A6-26-T-09HS

The contract solicitation SPE4A6-26-T-09HS issued by the Defense Logistics Agency’s ASC Commodity Division seeks the procurement of 50 hardcase units of the NUT, PLAIN, EXTENDED, identified by NSN 5310-01-392-9590, to be delivered FOB ORIGIN to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required delivery date of October 14, 2026, or 324 days after award. The item must comply with strict military and DLA specifications including packaging per MIL-STD-2073-1E, preservation method 10 with cleaning and drying, and marking consistent with MIL-STD-129, including 2D Data Matrix barcoding and no special marking code. Physical identification of bare items must adhere to RQ017, and palletization must follow DLA Packaging Requirements RP001. Quality control requires sampling per MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances acceptable unless otherwise stated; unspecified attributes are treated as major with an AQL of 1.0. Inspection and acceptance occur at the destination point by the government. All payment requests and receiving reports must be submitted electronically via WAWF, and contractors must comply with DFARS clauses regarding cybersecurity, hazardous materials, export controls, trafficking in persons, employment eligibility, sustainable products, and prohibition of hexavalent chromium. The contract includes clauses for safeguarding covered defense information per NIST SP 800-171, prohibition on acquiring items from Communist Chinese military companies, and restrictions on arbitration agreements. No pricing is provided in the solicitation, and the contract type, award basis, or evaluation factors are not specified, indicating this is a simplified acquisition likely under LPTA standards. Offerors must submit electronically via DIBBS by August 5, 2026, and are required to provide UEI and CAGE codes, represent size and socioeconomic status, and disclose if supplying covered telecommunications equipment. The contract enforces a zero variance in quantity and mandates compliance with the DLA Master List of Technical and Quality Requirements referenced by R001.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

PLATE, MOUNTING

Solicitation # SPE7L1-26-Q-1419

The contract specifies the procurement of 292 mounting plates identified by NSN 5340-01-578-1311 under solicitation SPE7L1-26-Q-1419, with delivery required within 104 days after award and a firm fixed price structure with no tolerance for quantity variation. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, and compliance with MIL-STD-130N for identification marking of military property is mandatory. The item must adhere to stringent packaging standards outlined in DLA’s RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and TQ requirement IP025 while non-hazardous materials must comply with ASTM D3951 under DLA’s overarching authority. Ozone-depleting chemicals are strictly prohibited, and any alternative substances require prior approval unless explicitly authorized by the specification. The product must be sourced from qualified manufacturers listed on approved QPLs or QMLs as referenced in the associated technical documentation, and manufacturing must meet ISO 9001:2015 quality management standards. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. The item is subject to configuration change management procedures and covered defense information controls, and all packaging must be labeled and palletized per DLA guidelines. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract mandates full and open competition and applies to a Federal procurement with a NAICS code of 332722.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A1-26-T-0556

The contract pertains to the procurement of 80 welding studs, identified by NSN 5307-01-529-7683, under solicitation SPE4A1-26-T-0556, with a total estimated value of $6,400.00 at $80.00 per unit. The delivery is required by October 9, 2026, with a need ship date of May 12, 2026, and the place of performance is the DLA Distribution Facility in New Cumberland, Pennsylvania. Offers must be submitted electronically via DIBBS by August 5, 2026, under FOB Origin terms, with transportation costs included for international suppliers to a contiguous U.S. destination. The item is subject to stringent packaging and marking requirements, including compliance with MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling and barcoding, and the prohibition of mercury or mercury-containing compounds in both packaging and preservation, which must follow PRES MTHD: 33 CLNG/DRY: 1 with no additional preservation materials. Bare item identification as per RQ017 and quality conformance inspection under RQ006 are mandatory, with inspection and acceptance occurring at destination using MIL-STD-1916 or equivalent zero-based sampling. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting access to contractors approved under the US/Canada Joint Certification Program, who have completed required DLA export control training and questionnaires. The contract incorporates multiple FAR and DFARS clauses relating to cybersecurity, including safeguarding covered defense information under 252.204-7012 and the prohibition of certain telecommunications equipment under 252.204-7018. Offerors must comply with reporting obligations for hazardous materials under 252.223-7001, including pre-award submission of hazard labels and MSDS data per 29 CFR 1910.1200, and must update the Government of any changes in material composition. Socioeconomic representations for small business, HUBZone, WOSB, EDWOSB, and SDVOSB status are required, with award likely based on a Lowest Price Technically Acceptable methodology given the absence of non-price evaluation factors. Electronic

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

SCREW, CAP, HEXAGON H

Solicitation # SPE4A6-26-T-04MJ

The contract pertains to the procurement of 33 units of a hexagon head cap screw identified by the NSN 5305-01-241-6224 under purchase request 7017199954. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated by the solicitation number SPE4A6-26-T-04MJ and was posted on July 7, 2026, with a response deadline of July 15, 2026. This federal procurement is open for bids in accordance with standard government contracting procedures, and the place of performance and shipping details are not specified in the provided data. Interested parties must submit responses through the official DIBBS portal linked in the solicitation before the deadline to be considered.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-09HR

The contract solicitation SPE4A6-26-T-09HR calls for the procurement of 80 machine bolts, specifically self-locking bolts identified by NSN 5306-01-175-5359, under a simplified acquisition framework. Delivery is required FOB Origin within 155 days of award, with the final destination being the DDSP New Cumberland Facility in Pennsylvania, and all inspections and acceptances are to occur at the manufacturer’s or supplier’s location. The item is procured against a military or federal specification and is not subject to shelf life restrictions or Item Unique Identification requirements as per DFARS 252.211-7003(c)(1)(i). Packaging, marking, and preservation must strictly comply with DLA Master List requirements, particularly RP001 for palletization and packaging, MIL-STD-129 for shipping labels and barcoding, and MIL-STD-130N for bare item identification including manufacturer logo, lot number, and material identification. Hazardous materials labeling must adhere to 29 CFR 1910.1200, and safety data sheets must be submitted prior to award. The contract incorporates numerous Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses mandating compliance with cybersecurity standards including safeguarding covered defense information under 252.204-7012 and alignment with NIST SP 800-171 requirements through 252.240-7997, with deviations authorized under specific tracking numbers. Provisions prohibit the acquisition of covered telecommunications equipment from entities like Huawei or ZTE and require contractors to inform employees of whistleblower rights. Payment must be submitted electronically via Wide Area WorkFlow, and all subcontracting for commercial products follows specific clauses with deviations. The contracting officer is Debra Fowler of the Department of Defense’s ASC Commodities Division, and offerors must hold a Valid Unique Entity ID and CAGE code, with small business representation mandatory under FAR 52.219-1. All material must conform to ASME B18.2.1 standards and be produced under a quality management system compliant with SAE AS9003 or ISO 9001 as tailored. The solicitation does not include pricing details, contract value estimates, or evaluation factors, and submissions must be made exclusively through the DIBBS portal with no paper submissions permitted.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

NUT, PLAIN, SLOTTED, H

Solicitation # SPE4A6-26-T-08RR

The contract covers the procurement of 70 units of NUT, PLAIN, SLOTTED, H, identified by NSN 5310-01-559-2806, under solicitation SPE4A6-26-T-08RR, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days after award, with FOB Origin terms, and acceptance occurs at the origin point. The items must conform to the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other references including ASTM D3951. The product specification aligns with DIN979 Revision dated 10/01/2010, and manufacturing must comply with tailored quality requirements per RQ001, including compliance with SAE AS9003 or ISO 9001 as implemented through an inspected quality system. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise directed, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must adhere to MIL-STD-129 and RP001 for palletization, with bare item marking required per RQ017 and removal of government identification from non-accepted supplies mandated by RQ011. Hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard and accompanied by approved safety data sheets prior to award. All packaging must also reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the contract. The contract mandates use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports, with payment routing determined by the award-specific DoDAAC. Cybersecurity requirements under NIST SP 800-171 and DFARS 252.204-7012 are enforced, requiring implementation of security controls and reporting of cyber incidents within 72 hours. The solicitation includes mandatory clauses on equal opportunity, combating trafficking in persons, employment eligibility verification, sustainable products, and unauthorized obligations, all subject to deviations. Offerors must hold a valid UEI and CAGE code and comply with socioeconomic representations for small business, HUBZone, or other designated categories. Pricing is provided as a total

ASC COMMODITIES DIVISION

POSTED

DEADLINE

NUT, SELF-LOCKING, EX

Solicitation # SPE4A6-26-T-57S2

The contract is for 268 self-locking nuts with an extended washer and hexagonal configuration, identified by NSN 5310-01-342-2011, under solicitation SPE4A6-26-T-57S2. The product must meet the latest revision of the original equipment manufacturer’s drawing and comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Identification marking of the nuts must follow MIL-STD-130N dated 16 Nov 2012, including manufacturer’s logo, lot number, and material identification, excluding any government-specific identifiers on non-accepted supplies. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The supplier must also maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment compliance and handle covered defense information appropriately. The delivery deadline is 169 days from award, and the place of performance is Tracy, CA, 95304-5000. The solicitation was posted on July 31, 2026, with a response deadline of August 5, 2026, and the contracting office is the ASC Commodities Division of the Department of Defense, with Alexander Sotos as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

Project Management and Coordination ServicesThis contract involves comprehensive end-to-end management of furniture supply, delivery, and installation services with full coordination required between the contractor and the government’s Contracting Officer’s Representative and Project Manager. The scope includes all logistical elements necessary to ensure timely and compliant delivery and setup of furniture at the designated facility in Bremerton, Washington, 98314, encompassing site access planning and security coordination. As a Small Business Set Aside under NAICS code 541611, the contract is reserved exclusively for small businesses, with a response deadline of August 6, 2026, and was posted on July 31, 2026. The performing agency is the Department of Defense through DLA Maritime - Puget Sound, and the task requires meticulous adherence to federal procurement standards and on-site operational protocols.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Logistics and Delivery ServicesThe contract is for logistics and delivery services to transport furniture kits to the Puget Sound Naval Shipyard Receiving Officer located in Building 514 in Bremerton, Washington, with a zip code of 98314. All deliveries must be performed using vehicles equipped with lift gates to ensure proper handling and unloading of the furniture kits. The solicitation is classified as a subcontract under a Small Business Set Aside, meaning only small businesses are eligible to bid, and the North American Industry Classification System code is 484220, which pertains to specialized freight trucking. The opportunity was posted on July 31, 2026, and responses are due by 5:00 PM on August 6, 2026. The contracting activity is managed by DLA Maritime - Puget Sound under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Electrical Integration for Powered FurnitureThe contract titled Electrical Integration for Powered Furniture seeks a small business subcontractor to install and certify electrical components within powered furniture systems, including adjustable height desks, powered panels, and wire management solutions. The work must comply with all applicable safety and performance standards to ensure reliable operation and long-term durability of the integrated systems. The scope requires precise technical execution, proper documentation, and certification of all electrical work to meet federal and industry specifications for defense-related environments. All components must be installed to allow seamless functionality while maintaining aesthetic and ergonomic integrity. This opportunity is designated as a Small Business Set Aside under NAICS code 238211 and is managed by DLA Maritime - Puget Sound under the Department of Defense. Proposals must be submitted by August 6, 2026, at 5:00 PM Eastern Time, with performance expected to occur at the facility in Bremerton, Washington, zip code 98314. The contract is structured as a subcontract, indicating it will support a primary contractor involved in larger defense or federal furniture procurement efforts. While no point of contact is listed, interested parties should utilize the provided SAM.gov link for additional details and submission requirements.

POSTED

DEADLINE

Furniture Installation and On-Site AssemblyThe contract entails the on-site installation and assembly of modular office furniture systems, including panels, desks, workbenches, and storage units, specifically for Building 943 in Bremerton, Washington, with strict adherence to government-provided layouts. This is a subcontract classified as a Small Business Set Aside under the NAICS code 238213, reserved exclusively for small businesses, ensuring eligibility and compliance with SBA guidelines. The work must be completed at the designated location, and bidders are required to submit proposals by the deadline of August 6, 2026, at 5:00 p.m. The awarding agency is DLA Maritime - Puget Sound, operating under the Department of Defense, underscoring the federal nature of the project and the need for precise execution in a government facility.

POSTED

DEADLINE

Office Furniture Supply and Kit AssemblyThe contract entails the manufacture, pre-assembly, and packaging of modular office furniture systems including cubicles, desks, storage units, and conference components, all constructed to exact government layout specifications. All work must adhere to precise design standards and require skilled fabrication and assembly processes to ensure uniformity, durability, and compliance with federal office environment requirements. The furniture systems are to be fully prepared for final installation at the designated location, with all components kit-packed and labeled for efficient on-site deployment. This is a Small Business Set Aside contract under NAICS code 337214, exclusively available to small businesses, and is managed by the Department of Defense through DLA Maritime - Puget Sound. The place of performance is specified as Bremerton, Washington, with a response deadline of August 6, 2026, at 5:00 PM. The contract is classified as a subcontract, indicating it is part of a broader procurement structure, and the full details can be accessed through the provided SAM.gov link for interested qualified vendors.

Office Furniture (except Wood) Manufacturing

POSTED

DEADLINE

Traceability Documentation ServicesThe contract is for Traceability Documentation Services under a Small Business Set Aside, requiring the development and maintenance of accurate traceability records for materials and production in alignment with DLAD Proc Notes C03. It is a subcontract opportunity issued by the Department of Defense through DLA Maritime - Puget Sound, with performance centered in Bremerton, Washington, 98314. The solicitation was posted on July 31, 2026, and responses are due by August 3, 2026, at 9:00 PM Eastern Time. The work falls under NAICS code 541611, which classifies it as Management Consulting Services, indicating the need for specialized expertise in documentation systems, procedural compliance, and operational traceability frameworks. The requirement emphasizes adherence to defense logistics standards and the ongoing management of verifiable records throughout the production lifecycle.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Packaging and Shipping Labeling ComplianceThe contract titled Packaging and Shipping Labeling Compliance requires the preparation of government-compliant packaging and shipping labels adhering to MIL-STD-129 and ISO/IEC 15418 standards, ensuring all labeling meets U.S. Department of Defense requirements for logistics and supply chain traceability. Work is to be performed in Bremerton, Washington, with a zip code of 98314, and the contract is classified as a subcontract under a Small Business Set Aside, designated as total set aside, meaning only small businesses qualify to compete. The North American Industry Classification System code is 493190, indicating the work falls within other warehousing and storage activities. The ordering agency is DLA Maritime - Puget Sound, under the Department of Defense. The solicitation was posted on July 31, 2026, with a mandatory response deadline of August 3, 2026, at 9:00 PM Eastern Time. All proposals must comply with the specified technical standards and be submitted prior to the deadline to be considered for award.

Other Warehousing and Storage

POSTED

DEADLINE

Product Marking and Data Matrix Encoding ServicesThe contract requires the permanent application of 'FR' markings and Data Matrix codes on plastic film in accordance with military standards, ensuring traceability and compliance for defense-related applications. The work must be performed at the specified place of performance in Bremerton, Washington, with delivery and quality adherence to stringent government specifications. This subcontract is designated as a Small Business Set Aside under the SBA program, meaning only eligible small businesses may bid, and it falls under the NAICS code 323111 for commercial printing. The opportunity was posted on July 31, 2026, with proposals due by August 3, 2026, and is managed by the Department of Defense through DLA Maritime - Puget Sound. All work must meet exacting military requirements for durability, legibility, and data encoding accuracy under operational conditions.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Fire Retardant Testing and Certification ServicesThe contract requires independent laboratory testing and certification of plastic film for fire resistance in accordance with NFPA 701 standards, ensuring compliance with fire safety requirements for materials used in public spaces. The work involves evaluating flammability characteristics through standardized testing procedures, documenting results, and issuing official certification to verify that the plastic film meets established fire retardant criteria. All testing must be conducted by an accredited lab with proven expertise in textile and film flammability assessments. This is a subcontract under a Small Business Set Aside, with the NAICS code 541380 indicating it falls under other scientific and technical consulting services. The contract was posted on July 31, 2026, with a response deadline of August 3, 2026, and the performance location is Bremerton, WA, with a ZIP code of 98314. The contracting activity is managed by DLA Maritime - Puget Sound under the Department of Defense, and only eligible small businesses may submit proposals. The scope centers strictly on laboratory validation and certification, with no manufacturing, supply, or installation obligations included.

Testing Laboratories and Services

POSTED

DEADLINE

White Plastic Film Manufacturing and SupplyThe contract is for the manufacture and delivery of large-format white, non-transparent plastic film with fire retardant properties and permanent markings, intended for use under a Small Business Set Aside designation. The solicitation is issued by DLA Maritime - Puget Sound under the Department of Defense, with performance required in Bremerton, Washington, 98314. The NAICS code 326112 identifies this as a plastic film and sheet manufacturing activity, and the opportunity is exclusively for small businesses. The posting date is July 31, 2026, with a firm response deadline of August 3, 2026, at 9:00 PM Eastern Time, indicating a narrow window for submission. The film must meet specific technical requirements for opacity, fire resistance, and durable marking, suggesting it will be used in environments where safety, visibility, and permanence are critical, likely in military or defense applications. The contract is structured as a subcontract, meaning the winning vendor may be supplying components or materials to a prime contractor rather than directly to the government.

Plastics Packaging Film and Sheet (including Laminated) Manufacturing

POSTED

DEADLINE

Solicitation # SPMYM226Q7862

This solicitation, numbered SPMYM26Q7862, seeks quotes for plastic film under a Small Business Set Aside, with the North American Industry Classification System code 326112, issued by the Department of Defense through DLA Maritime - Puget Sound in Bremerton, Washington. All responses must be submitted electronically via SAM.gov and must include a fully completed solicitation packet, including signed certifications in boxes 17A, 30a, 30b, and 30c, along with the contractor’s CAGE code. Quotes must specify FOB Destination Bremerton, WA, clearly annotate the lead time, and identify both the manufacturer’s name and the country where the product is manufactured. Only bids submitted via email or fax to jack.edwards@dla.mil will be considered responsive, and bidders must ensure applicable boxes in clause 52.204-24(2)(d)(1) and (2) are checked. Contractors subject to NIST SP 800-171 compliance must have a current, valid assessment not older than three years, unless the item is classified as Commercial Off The Shelf, in which case it is exempt but must be explicitly identified and documented in the bid. The deadline for submission is August 3, 2026, at 9:00 PM Eastern Time, and any amendments will be posted on SAM.gov.

Plastics Packaging Film and Sheet (including Laminated) Manufacturing

POSTED

DEADLINE

Solicitation # SPMYM226Q7576

This solicitation, numbered SPMYM226Q7576, seeks bids for a Metal Bar under a Level 1, unrestricted procurement issued by DLA Maritime - Puget Sound, with all submissions required to be completed through SAM.gov and submitted via email to jack.edwards@dla.mil or by fax by the deadline of July 2, 2026 at 9:00 PM Eastern Time. To be considered responsive, offerors must fully complete the solicitation packet including box 17A, sign all required sections on page 1, provide their CAGE code, quote FOB Destination Bremerton, WA, clearly annotate the lead time, and identify both the manufacturer and the country of origin for the products. Items classified as Commercial Off-The-Shelf (COTS) are exempt from NIST SP 800-171 cybersecurity requirements, but offerors must explicitly state this designation and provide supporting information to the contracting officer during bid submission; non-COTS providers must have a current, valid assessment under DFARS 252.204-7019 that is no more than three years old unless otherwise stipulated. The contract requires strict compliance with military traceability and marking standards, including MIL-STD-792 for permanent and temporary markings on metal bars, specifying mandatory inclusion of manufacturer name, specification, grade, size, contract number, traceability code, and “SML” designation where applicable. All items not shipped via parcel services must be palletized in compliance with ASTM-D-3951, and packaging must include required commercial markings such as NSN, quantity, contract number, and ship-to information. Final delivery is due on or before August 7, 2026, to the Puget Sound Naval Shipyard in Bremerton, WA, with acceptance occurring at that destination under government supervision. The Government reserves the right to conduct initial inspection at the contractor’s facility via DCMA and performs final acceptance with zero-defect criteria, requiring 100% inspection of traceability, NDT certifications, and material test reports. Invoicing must be processed exclusively through WAWF using the appropriate document types per line item pricing structure, with payments managed by the DLA Maritime - Puget Sound Contracting Division. Offerors must represent their business size status and provide UEI and CAGE codes, and all submissions must include certified data for chemical and mechanical properties per Exhibit J001 and comply with

Nonferrous Forging

POSTED

DEADLINE