Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Cap Screws

Open
SPMYM327Q7006Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Portsmouth Naval Shipyard, through DLA Maritime, is soliciting quotes for various cap screws and fasteners, including socket head, hex head, and flat head varieties. The requirement specifies a variety of materials and standards, such as MIL-DTL-1222J, FF-S-86J, and MIL-DTL-18240F for self-locking mechanisms. Key deliverables include the physical fasteners and associated data requirements, specifically Certificates of Compliance (CDRL DI-MISC-81356A) and Certification/Data Reports (CDRL DI-MISC-82386). All items must be delivered FOB Destination to Kittery, Maine, with a required delivery date of December 3, 2026. This procurement is a Total Small Business Set Aside. Award will be based on the Lowest Price Technically Acceptable (LPTA) criteria, and the Supplier Performance Risk System (SPRS) will be used to determine vendor responsibility. Interested parties must be registered in the System for Award Management (SAM) and submit their quotes by December 1, 2026. If the offeror is not the manufacturer, proof of traceability is required. Packaging must adhere to ASTM D-3951 and MIL-STD-129, with specific marking requirements for fastener heads including a minimum of six dots.

General Info

DLA Maritime seeks quotes for various fasteners for Portsmouth Naval Shipyard.

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

Kittery, ME, 03904, USA

Set-Aside

SBA

Documents

3
PDF, High priority: read this firstspecifications
High
DOCX, High priority: read this firstspecifications
High
PDF, High priority: read this firstrfq
High

Read all 3 documents

Due in 12 days

Every page of every file, in your free workspace.

Read the documents

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 12 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 3 solicitation documentsRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
  • Buyer contactEmail and phone
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Portsmouth
Contacts2 people available
OfficePORTSMOUTH, NH, 03801-5000, USA

Full Description

Show more

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, as supplemented with the additional information included in this notice.  This announcement constitutes the only solicitation; a written solicitation will not be issued.  PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov.  The RFQ number is SPMYM327Q7006. This solicitation documents and incorporates provisions and clauses in effect through FAC 2026-01 Efective Date 03/13/2026 and DFARS Change Notice 20260702.


It is the responsibility of the contractor to be familiar with the applicable clauses and provisions.  The clauses may be accessed in full text at this address:


https://www.ecfr.gov, https://www.acquisition.gov/content/list-sections-affected, and  http://www.acq.osd.mil/dpap/dars/change_notices.html


The FSC Code is 5305 and the NAICS code is 332722. The Small Business Standard is 600 employees. This requirement is being processed utilizing 100% SBSA.


Evaluation criteria is Lowest Price Technically Acceptable (LPTA). SPRS will be used to determine vendor responsibility.  Potential contractors will be screened for responsibility in accordance with FAR 9.104.


Only one quote per vendor will be accepted. Interested parties must fill out the required request for quote paperwork to be considered for award. It is in the attachment section and titled  “RFQ SPMYM327Q7006”. If you are not the manufacturer, proof of traceability is required by the solicitation deadline.


The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:


ITEM     DESCRIPTION                                                                   QTY   U/I             


0001       HEX SLF LKG HEAD CAPSCREW                              6          EA


HEX HEAD SLF LKG CAPSCREW, 1/2 -13UNC-3A X 7-1/2" LG, MIL-DTL-1222J TY-I, ALLOY STEEL, GRADE-5, ZINC PLATED IAW ASTM B633 TY-II SC-2; SELF LKG IAW MIL-DTL- 18240F AMEND-1, ANY TYPE. MARKINGS OF A MINIMUM 6 DOTS (APPROX. 0.032) RAISED OR DEPRESSED (APPROX. 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY)



0002       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____


                A001        EXHIBIT A, SEQ A001


                See Exhibit “A” Seq A001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “A” Seq A002: CDRL DI-MISC-82386 (Certification / Data Report)



0003       SLF LKG HEX SOCKET                                                  4          EA             


SLF LKG HEX SOCKET (CYLINDRICAL) HEAD CAPSCREW, 1-1/2 -6UNC-2A X 3-1/2” LG, FF-S-86H ALLOY STEEL, TYPE-VI, MIL-DTL-18240F(1) TYPE-N. MARKINGS OF A MINIMUM 6 DOTS (APPROX. 0.032) RAISED OR DEPRESSED (APPROX. 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY).



0004      DATA REQUIREMENTS                                                   1          EA              ___NSP____        ___NSP_____


                B001        EXHIBIT B, SEQ B001


                See Exhibit “B” Seq B001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “B” Seq B002: CDRL DI-MISC-82386 (Certification / Data Report)



0005       HEX SLF LKG HEAD CAPSCREW                              3          EA             


HEX HD CAPSCREW, 1/2 - 13UNC-2A X 1” LG, STL, MIL-DTL-1222J, TYPE-I, GR B-7.



0006      DATA REQUIREMENTS                                                   1          EA              ___NSP____        ___NSP_____


                C001        EXHIBIT C, SEQ C001


                See Exhibit “C” Seq C001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “C” Seq C002: CDRL DI-MISC-82386 (Certification / Data Report)



0007       HEX SLF LKG HEAD CAPSCREW                              8          EA             


HEX HEAD CAPSCREW 1/2-13UNC-2A X 2” LONG, MIL-DTL-1222J, TYPE-I. MATERIAL TO BE ALLOY STEEL GRADE-B7,



0008       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____


                D001        EXHIBIT D, SEQ D001


                See Exhibit “D” Seq D001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “D” Seq D002: CDRL DI-MISC-82386 (Certification / Data Report)



0009       HEX HEAD CAPSCREW                                                 5          EA             


HEX HEAD CAPSCREW 1-8UNC-2A X 4” LONG, MIL-DTL-1222J TYPE-I. MATERIAL SHALL BE ALLOY STEEL GRADE-8. NO COATING ALLOWED.



0010       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____


                E001        EXHIBIT E, SEQ E001


                See Exhibit “E” Seq E001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “E” Seq E002: CDRL DI-MISC-82386 (Certification / Data Report)



0011       HEX HEAD CAPSCREW                                                 4          EA             


HEX HEAD CAPSCREW 1-8UNC-2A X 4-1/4” LONG, MIL-DTL-1222J, TYPE-I. MATERIAL SHALL BE ALLOY STEEL GRADE-8. NO COATING ALLOWED



0012       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____


                F001        EXHIBIT F, SEQ A001


                See Exhibit “F” Seq F001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “F” Seq F002: CDRL DI-MISC-82386 (Certification / Data Report)



0013       CAPSCREW                                                                         4          EA             


                HEXAGON SOCKET (CYLINDRICAL) HEAD CAP SCREW, 1-8UNRC-3A X 2-1/4 IN LG, NICUAL, FF-S-86J TY-VI, QQ-N-286D, CD, AN, AH.


0014       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____


                G001        EXHIBIT G, SEQ G001


                See Exhibit “G” Seq G001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “G” Seq G002: CDRL DI-MISC-82386 (Certification / Data Report)



0015       FLAT HEAD SCREW                                                        6          EA             


FLAT HEAD 82 DEGREE SLF LKG MACHINE SCREW, 0.500-13UNC-3A X 2.000 IN. LG. MFR IAW FF-S-92D TYPE III (CROSS RECESS DESIGN I) STYLE 2C (FLAT HEAD 82 DEGREE). MAT’L IS CADMIUM PLATED STEEL. SLF LKG IAW MIL-DTL-18240F AMEND 1 TYPE “L OR P”. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF NECESSARY).



0016       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____


                H001        EXHIBIT H, SEQ H001


                See Exhibit “H” Seq H001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “H” Seq H002: CDRL DI-MISC-82386 (Certification / Data Report)



0017       SAME AS ITEM 0015                                                       30       EA             


               


0018       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____


                I001        EXHIBIT I, SEQ I001


                See Exhibit “I” Seq I001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “I” Seq I002: CDRL DI-MISC-82386 (Certification / Data Report)



0019       SOCKET HEAD CAP SCREW                                        16       EA             


SOCKET HEAD CAP SCREW, 1/4-20UNC-3A X 5/8 LNG, MIL-DTL-1222J TY-II, NICUAL, GR-500, QQ-N-268G, CD, ANLD, AH.



0020       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____


                J001        EXHIBIT J, SEQ J001


                See Exhibit “J” Seq J001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “J” Seq J002: CDRL DI-MISC-82386 (Certification / Data Report)



0021       HEX HEAD CAP SCREW                                                32       EA             


HEX HEAD CAP SCREW, 5/16-18UNC-2A X .875 LNG, MIL-DTL-1222J TY-I, NICUAL, GR-500, QQ-N-286G.



0022       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____


                K001        EXHIBIT K, SEQ K001


                See Exhibit “K” Seq K001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “K” Seq K002: CDRL DI-MISC-82386 (Certification / Data Report)



0023       SOCKET HEAD CAP SCREW                                        3          EA             


                HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREW 82° INCLUDED ANGLE SELF LOCKING, 3/4-10UNC-2A X 2 ¼ LNG, NICUAL, QQ-N-268G, FM 2, ANLD, AH, FF-S-86J TY-IV, SELF LOCKING PER MIL-DTL-18240F TYPE ANY. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE IF NECESSARY).


0024       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____


                L001        EXHIBIT L, SEQ L001


                See Exhibit “L” Seq L001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “L” Seq L002: CDRL DI-MISC-82386 (Certification / Data Report)



0025       SOCKET HEAD CAP SCREW                                        2          EA             


                HEXAGON SOCKET CYLINDRICAL HEAD CAP SCREW, 1/2-13UNC-2A X 3 LNG, FF-S-86J TY-VY, NICU, QQ-N-281D AMEND 2. THREADS NEED TO BE EXTENDED TO WITHIN 1/4 IN OF HEAD.


0026       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____


                M001        EXHIBIT M, SEQ M001


                See Exhibit “M” Seq M001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “M” Seq M002: CDRL DI-MISC-82386 (Certification / Data Report)



0027       SOCKET HEAD CAP SCREW                                        16       EA             


                HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREW 82° INCLUDED ANGLE SELF LOCKING, 5/8-11UNRC-3A X 1 ½ LNG, NICUAL, QQ-N-268G, FM 2, ANLD, AH, FF-S-86J TY-IV, SELF LOCKING PER MIL-DTL-18240F TYPE L OR P . MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE IF NECESSARY)


0028       DATA REQUIREMENTS                                                  1          EA              ___NSP____        ___NSP_____


                N001        EXHIBIT N, SEQ N001


                See Exhibit “N” Seq N001: CDRL DI-MISC-81356A (Certificate of Compliance).


                See Exhibit “N” Seq N002: CDRL DI-MISC-82386 (Certification / Data Report).



NOTE:  OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 252.204-7016 AND INCLUDE THE COMPLETED PROVISIONS WITH THEIR OFFER.








FAR CLAUSES AND PROVISIONS



Clause/Provision


Title


52.203-19


Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements


52.204-7


System for Award Management


52.204-10


Reporting Executive Compensation and First-Tier Subcontract Awards  


52.204-13


System for Award Management Maintenance


52.209-11


Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law


52.211-14


Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program Use.


52.211-15


Defense Priority and Allocation Requirements


52.212-1


Instructions to Offerors—Commercial Products and Commercial Services


52.212-2


Evaluation—Commercial Products and Commercial Services


52.212-4


Contract Terms and Conditions—Commercial Products and Commercial Services


52.219-6


Notice of Total Small Business Set-Aside


52.219-28


Post-Award Small Business Program Representation


52.222-3


Convict Labor


52.222-19


Child Labor—Cooperation with Authorities and Remedies


52.222-36


Equal Opportunity for Workers with Disabilities


52.222-50


Combating Trafficking in Persons


52.222-90


Addressing DEI Discrimination by Federal Contractors


52.226-8


Encouraging Contractor Policies to Ban Text Messaging While Driving


52.232-33


Payment by Electronic Funds Transfer—System for Award Management


52.232-39


Unenforceability of Unauthorized Obligations


52.232-40


Providing Accelerated Payments to Small Business Subcontractors


52.233-3


Protest after Award


52.233-4


Applicable Law for Breach of Contract Claim


52.240-90


Security Prohibitions and Exclusions Representations and Certifications **See attached clauses and provisions for full text**


52.240-91


Security Prohibitions and Exclusions **See attached clauses and provisions for full text**


52.240-93


Basic Safeguarding of Covered Contractor Information Systems **See attached clauses and provisions for full text**


52.242-15


Stop-Work Order


52.243-1


Changes—Fixed Price


52.246-1


Contractor Inspection Requirements


52.247-34


F.o.b. Destination


52.252-1


Solicitation Provisions Incorporated by Reference **See attached clauses and provisions for full text**


52.252-2


Clauses Incorporated by Reference **See attached clauses and provisions for full text**


52.252-5


Authorized Deviations in Provisions **See attached clauses and provisions for full text**


52.252-6


Authorized Deviations in Clauses **See attached clauses and provisions for full text**






DFARS CLAUSES AND PROVISIONS



Clause/Provision


Title


252.203-7000


Requirements Relating to Compensation of Former DoD Officials


252.203-7002


Requirement to Inform Employees of Whistleblower Rights


252.203-7005


Representation Relating to Compensation of Former DoD Officials


252.204-7003


Control of Government Personnel Work Product


252.204-7008


Compliance with Safeguarding Covered Defense Information Controls


252.204-7012


Safeguarding Covered Defense Information and Cyber Incident Reporting


252.204-7015


Notice of Authorized Disclosure of Information for Litigation Support


252.204-7016


Covered Defense Telecommunications Equipment or Services--Representation


252.204-7017


Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services--Representation


252.204-7018


Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services


252.240-7997


NIST SP 800-171 DoD Assessment Requirements.


252.204-7021


Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirement


252.204-7022


Expediting Contract Closeout


252.204-7024


Notice on the use of the Supplier Performance Risk System


252.204-7025


Notice of Cybersecurity Maturity Model Certification Level Requirements


252.215-7013


Supplies and Services Provided by Nontraditional Defense Contractors


252.223-7008


Prohibition of Hexavalent Chromium


252.225-7000


Buy American--Balance of Payments Program Certificate—Basic


252.225-7001


Buy American and Balance of Payments Program—Basic


252.225-7002


Qualifying Country Sources as Subcontractors


252.225-7012


Preference for Certain Domestic Commodities


252.225-7048


Export-Controlled Items


252.225-7059


Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region–Representation


252.225-7060


Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region


252.232-7003


Electronic Submission of Payment Requests and Receiving Reports


252.232-7006


Wide Area WorkFlow Payment Instructions **See attached clauses and provisions for full text**


252.232-7010


Levies on Contract Payments


252.243-7001


Pricing of Contract Modifications


252.244-7000


Subcontracts for Commercial Products or Commercial Services


252.247-7023


Transportation of Supplies by Sea--Basic


5452.233-9001


Disputes: Agreement To Use Alternative Dispute Resolution (ADR) **See attached clauses and provisions for full text**



DLA PROCUREMENT NOTES (See Attachment for Full Text)



C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)


C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2023)


C04 Unused Former Government Surplus Property (SEP 2021)


C14 Repackaging or Relabeling to Correct Deficiencies (MAY 2020)


C20 Vendor Shipment Module (VSM) (MAY 2026)


E05 Product Verification Testing (MAY 2020)


H10 Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (MAY 2024)


H18 Defense Priorities and Allocations System (DPAS) (JUL 2026)


L06 Agency Protests (DEC 2016)


L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (JUN 2024)


L09 Reverse Auction (OCT 2016)


L10 Competing Individual Delivery Orders Through Reverse Auctions (OCT 2016)


L31 Additive Manufacturing (JUN 2018)


L39 Cybersecurity Maturity Model Certification (CMMC) CMMC Level 1 Self-Assessment Requirement for Federal Contracting Information (FCI) (NOV 2025)


M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016)



LOCAL CLAUSES (See Attachment for Full Text)


YM3 A1: Additional Information


YM3 A3: Government Purchase Card Method of Payment Additional Info (When GCPC Payment)


YM3 C500: Mercury Control (Supplies)


YM3 C501: Correction of Certifications


YM3 C506: Qualified Products for Award


YM3 C524: Controlled Industrial Material


YM3 C528: Specification Changes


YM3 C531: Restrictions on K-Monel


YM3 D1: Deteriorative Material Marking


YM3 D2: Marking of Shipments


YM3 D2.2: Marking of Shipments


YM3 D4: Preparation for Delivery


YM3 D8: Prohibited Packing Materials


YM3 E2: Inspection and Acceptance (Destination)


YM3 E4: Disposition of Nonconforming Material


YM3 E504: Notice of Constructive Acceptance Period


YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard


YM3 H500: Special Provisions for Threaded Products


YM3 M8: Single Award for All Items (All or none procurements)



This announcement will close 12/01/2026 01:00 PM EST.  The Point of Contact for this solicitation is Mihaela Zouak who can be reached at Sign up to see this detail. All responsible sources may submit a quote which shall be considered by the agency. 


System for Award Management (SAM).  Quoters must be registered in the SAM database to be considered for award.  Registration is free and can be completed online at http://www.sam.gov/.


If not the actual manufacturer the manufacturer’s name, location, and business size must be provided.


Please submit quotes via email to: Sign up to see this detail, and Sign up to see this detail


All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, Paypal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.


*If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF.

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → DLA Maritime - Portsmouth

Same awarding agency

NAICS: 332722
New
Federal
BUSHING BEARING
Solicitation # SPMYM327Q8009
The Portsmouth Naval Shipyard, through DLA Maritime - Portsmouth, is soliciting quotes for four bushings (CLIN 0001) with a required delivery date of September 30, 2027. The required items are part number DBSF-32-130 or equivalent, featuring a dyphlon plastic alloy liner, a body diameter of 2.3775 inches, a bore diameter of 2.50050 inches, and an overall length of 2.375 inches with a stainless retainer, as specified in Item #53 of Drawing 6015998 Rev-F. This is a commercial items procurement under FAR part 12, and the award will be based on the Lowest Price Technically Acceptable (LPTA) criteria. The requirement is a Total Small Business Set Aside. Interested vendors must be registered in the System for Award Management (SAM) and submit quotes by November 25, 2026, at 4:00 PM EST. To request the technical drawings, a signed security agreement and an approved JCP 2345 are required. Evaluation will include a review of the Supplier Performance Risk System (SPRS) to determine vendor responsibility. Payment terms are Net 30 days after acceptance, with options for payment via Government Commercial Purchase Card (GCPC) or Wide Area Workflow (WAWF). All shipments must adhere to strict packaging and marking standards, including MIL-STD-129 for military items or ASTM-D-3951 for commercial items, and must be delivered FOB Destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
Federal
LEVEL 1 Nuts
Solicitation # SPMYM327Q4010
DLA Maritime - Portsmouth is soliciting the procurement of Self Locking Heavy Hex Nuts (NSN 5310016738294) under solicitation SPMYM327Q4010. This requirement is a Small Business Set Aside - Total. The items are designated as Level 1 Special Emphasis material and Critical Safety Items, requiring strict adherence to Technical Data Package PNTDP0170, NASM25027, and MIL-N-25027/1 standards. Key technical requirements include mandatory Dye Penetrant Inspection for non-magnetic grades, First Article Testing, and permanent traceability marking per MIL-STD-792 and MIL-DTL-32258. The use of additive manufacturing is prohibited unless specifically authorized. Deliveries are requested by February 26, 2027, with a destination of the Portsmouth Naval Shipyard in Kittery, Maine. Inspection will be conducted by DCMA in Philadelphia, and acceptance will be performed at the Portsmouth Naval Shipyard. The contract mandates a Higher-Level Contract Quality Requirement and requires the submission of PT inspection procedures to PNS Code 135T for approval. Invoicing must be processed through Wide Area Workflow (WAWF) with payment terms of Net 30 following successful inspection and acceptance. Offerors must provide comprehensive supply chain traceability and disclose any covered defense telecommunications equipment used in the fulfillment of the contract.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
Federal
Seal Ring Metal Assembly
Solicitation # SPMYM327Q7007
The Portsmouth Naval Shipyard, through DLA Maritime, is soliciting quotes for a brand-name mandatory Seal Ring Metal Assembly, part number SSCY 11079 from the Stain Seal Company. This is a total small business set-aside procurement under NAICS code 339991 and FSC code 5330. The requirement is for one unit of the assembly, and the government will utilize the Lowest Price Technically Acceptable (LPTA) evaluation method. To be considered technically acceptable, offerors must provide descriptive literature demonstrating how their quotation meets the required specifications. Vendor responsibility will be determined using the Supplier Performance Risk System (SPRS). The required delivery date is January 29, 2027, with final inspection and acceptance occurring at the destination in Kittery, Maine. Payment terms are Net 30 days after acceptance, with options for payment via Government Purchase Card or Wide Area Workflow. Offerors must be registered in the System for Award Management (SAM) and must complete the required representations regarding covered defense telecommunications equipment. All quotes must be submitted via email to the designated points of contact by November 18, 2026, at 1:00 PM EST. Technical drawings are available upon request following the submission of a valid DD Form 2345 and a signed security agreement.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Get AI-powered intelligence on this solicitation and the ones like it

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS