Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Quality Conformance and NDT Testing Services

Open
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Quality Conformance and NDT Testing Services is issued by the Department of Defense through DLA Maritime - Portsmouth. The contractor will perform specialized inspections and quality conformance tests for prime contractors on U.S. Navy hardware projects, specifically conducting dye penetrant inspections for non-magnetic grades and First Article Testing per NASM 25027 Table XIII. The work requires the use of precision measurement tools and dye penetrant equipment, with a mandatory requirement for ISO/IEC 17025 certification and strict compliance with ASTM-E1417 and ASTM-E1444 standards. The project is designated as a Small Business Set Aside - Total under NAICS code 541330, with the place of performance located in Kittery, Maine. The contractor is responsible for delivering comprehensive test certifications and data reports. The solicitation was posted on November 19, 2026, with a response deadline of December 2, 2026.

General Info

DoD subcontract for NDT testing and quality conformance services in Kittery, Maine.

NAICS

541330 - Engineering Services

Place of Performance

Kittery, ME, 03904, USA

Set-Aside

SBA

Documents

This scope was carved out of SPMYM327Q4010.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

LEVEL 1 Nuts

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Due in 13 days

Read the full solicitation package

This scope is part of a larger contract. Its documents live on the prime.

  • 4 documents on the prime contractFrom LEVEL 1 Nuts
Read the prime's documents

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Portsmouth
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs specialized inspections and quality conformance tests for prime contractors on U.S. Navy hardware projects. Conducts dye penetrant inspection for non-magnetic grades and First Article Testing (FAT) per NASM 25027 Table XIII. Utilizes precision measurement tools and dye penetrant equipment. Requires ISO/IEC 17025 certification and compliance with ASTM-E1417 and ASTM-E1444. Delivers test certifications and data reports.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
SLED
27-07 North Bay & Hwy 231 Booster Station and 5MG Storage Tank Designs
Solicitation # 27-07
The Bay County Board of County Commissioners is seeking professional engineering services for the design and implementation of two new booster pumping stations and two 5.0-million-gallon prestressed concrete ground storage tanks. The primary objective of these projects is to enhance system resilience and redundancy during storm and emergency conditions, ensuring sustained pressure, distribution storage, and disinfection capabilities during power or supply losses. The scope of work includes preliminary engineering, design, permitting, preparation of construction plans and specifications, and bidding assistance. Key technical requirements include the design of permanent on-site standby generators with 72 hours of fuel storage and enclosures rated for Category 5 winds. This is a fixed-price and fixed-time contract with an estimated value of 1,000,000 USD and a performance period of twelve months from the notice to proceed. There is no set-aside status for this solicitation. Proposals will be evaluated based on project history (40 points), approach and understanding (30 points), personnel (20 points), and firm information (10 points), with contracts awarded to the two highest-ranking responsive and responsible respondents. All firms and sub-consultants must be State of Florida licensed professionals and comply with FDEP guidelines and the Build America; Buy America Act. Submittals are due by December 15, 2026.
Utility Services

POSTED

about 3 hours ago

DEADLINE

in 26 days
View Details
NAICS: 541330
New
SLED
Utilities Augmented Staffing - Professional Engineering Services
Solicitation # 27-0016-RFQ-CCNAC
Pinellas County is seeking professional engineering services for utilities augmented staffing to provide integrated program management for its six-year Capital Improvement Plan. The project focuses on expediting infrastructure renewal, reducing infiltration and inflow, and eliminating sanitary sewer overflows within a densely populated urban environment. The selected project manager will oversee the coordination of other firms, develop requests for proposals, and provide performance reporting for wastewater and water infrastructure projects. The contract is estimated at 8 million dollars over a five-year term with negotiated rates that remain fixed for the duration of the term. The procurement is a points-based selection process where the primary evaluation factor is the firm's ability and experience, weighted at 42.5 percent. Additional points are awarded based on the volume of work previously awarded by the county to ensure equitable distribution. The contract includes strict compliance requirements, including federal grant provisions such as the Davis-Bacon Act and the Copeland Anti Kick Back Act for federally funded projects. Additionally, the agreement mandates a 10 percent financial commitment to certified Pinellas County small business enterprises for individual work assignments valued at 50,000 dollars or more. There is no specific set-aside status for this solicitation.
UTILITIES

POSTED

about 4 hours ago

DEADLINE

in 28 days
View Details
NAICS: 541330
New
SLED
(RFQ) 27-26, Airport Architectural, Engineering and Planning Consultant Services - Annual Contract
Solicitation # 27-26
Henry County is seeking qualified aviation consulting firms to provide professional architectural, engineering, and planning consultant services for the Atlanta Speedway Airport in Hampton, Georgia. This annual contract, solicitation number 27-26, is intended as a multi-year Master Agreement for a five-year period, consisting of an initial one-year term with four optional one-year renewals. The scope of work includes airport master planning, civil and electrical airport design, and construction administration and observations. Key responsibilities involve preparing project funding applications, updating airport layout plans and environmental assessments, and managing the Capital Improvements Program for fiscal years 2028-2032, which includes projects such as runway improvements and corporate hangar site development. Proposals must be submitted by December 3, 2026, at 3:00 PM, via the County's eProcurement Portal or delivered physically to the Henry County Purchasing Department. To be considered, proposers must be registered with SAM.gov and pre-qualified with the Georgia Department of Transportation. Selection is based on the demonstrated competence and qualifications of the firm, with potential additional points awarded for interviews or presentations. Contractors must comply with OSHA safety standards, E-Verify requirements, and drug-free workplace certifications. There is no specific set-aside status for this solicitation.
Capital Projects

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → DLA Maritime - Portsmouth

Same awarding agency

NAICS: 332722
New
Federal
LEVEL 1 Nuts
Solicitation # SPMYM327Q4010
DLA Maritime - Portsmouth is soliciting the procurement of Self Locking Heavy Hex Nuts (NSN 5310016738294) under solicitation SPMYM327Q4010. This requirement is a Small Business Set Aside - Total. The items are designated as Level 1 Special Emphasis material and Critical Safety Items, requiring strict adherence to Technical Data Package PNTDP0170, NASM25027, and MIL-N-25027/1 standards. Key technical requirements include mandatory Dye Penetrant Inspection for non-magnetic grades, First Article Testing, and permanent traceability marking per MIL-STD-792 and MIL-DTL-32258. The use of additive manufacturing is prohibited unless specifically authorized. Deliveries are requested by February 26, 2027, with a destination of the Portsmouth Naval Shipyard in Kittery, Maine. Inspection will be conducted by DCMA in Philadelphia, and acceptance will be performed at the Portsmouth Naval Shipyard. The contract mandates a Higher-Level Contract Quality Requirement and requires the submission of PT inspection procedures to PNS Code 135T for approval. Invoicing must be processed through Wide Area Workflow (WAWF) with payment terms of Net 30 following successful inspection and acceptance. Offerors must provide comprehensive supply chain traceability and disclose any covered defense telecommunications equipment used in the fulfillment of the contract.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
Federal
Seal Ring Metal Assembly
Solicitation # SPMYM327Q7007
The Portsmouth Naval Shipyard, through DLA Maritime, is soliciting quotes for a brand-name mandatory Seal Ring Metal Assembly, part number SSCY 11079 from the Stain Seal Company. This is a total small business set-aside procurement under NAICS code 339991 and FSC code 5330. The requirement is for one unit of the assembly, and the government will utilize the Lowest Price Technically Acceptable (LPTA) evaluation method. To be considered technically acceptable, offerors must provide descriptive literature demonstrating how their quotation meets the required specifications. Vendor responsibility will be determined using the Supplier Performance Risk System (SPRS). The required delivery date is January 29, 2027, with final inspection and acceptance occurring at the destination in Kittery, Maine. Payment terms are Net 30 days after acceptance, with options for payment via Government Purchase Card or Wide Area Workflow. Offerors must be registered in the System for Award Management (SAM) and must complete the required representations regarding covered defense telecommunications equipment. All quotes must be submitted via email to the designated points of contact by November 18, 2026, at 1:00 PM EST. Technical drawings are available upon request following the submission of a valid DD Form 2345 and a signed security agreement.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 333923
New
Federal
Luff Hoist RRL & LRL Wire ropes
Solicitation # SPMYM327Q6006
DLA Maritime - Portsmouth is soliciting quotes for the procurement of Port and Starboard Luff Hoist Wire Ropes for the Portsmouth Naval Shipyard. The requirement consists of two items: a Port Luff Hoist Wire Rope with Right Regular Lay (RRL) and a Starboard Luff Hoist Wire Rope with Left Regular Lay (LRL). Technical specifications require the ropes to be pre-formed, bright, non-galvanized, and fabricated from extra improved or extra-extra improved plow steel in accordance with ASTM A1023/A1023M-21 standards. Key deliverables include positive traceability to the manufacturer, a Charpy V-notch test report for each Open Spelter Socket, and verification that socket end connections have been pull-tested to 79,750 lbs. This procurement is a Small Business Set Aside - Total and will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria, with the Supplier Performance Risk System (SPRS) used to determine vendor responsibility. Quotes must be submitted via email by November 30, 2026, and the required delivery date is February 1, 2027. Offerors must be registered in the System for Award Management (SAM) and provide descriptive literature and proof of traceability to be considered technically acceptable. DCMA presence is required during pre-delivery inspections, and final inspection will occur at the destination.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
Federal
Hardware
Solicitation # SPMYM327Q4011
DLA Maritime - Portsmouth is soliciting quotes for various commercial hardware items, including hexagon socket head cap screws and bolt studs, for the Portsmouth Naval Shipyard. This procurement is a Small Business Set Aside - Total and is being conducted using Simplified Acquisition Procedures under FAR 13 and FAR part 12 for commercial items. The source selection is based on the Lowest Price Technically Acceptable (LPTA) criteria, where offers are rated as either acceptable or unacceptable based on technical specifications. The Government Required Delivery Date is December 3, 2026, and quotes must be submitted via email by November 30, 2026. Key requirements include strict adherence to packaging and marking standards, specifically ASTM D-3951 for commercial packaging and MIL-STD-129 for shipment marking. Contractors must provide specific data deliverables, including certificates of compliance and chemical/mechanical test results. The contract mandates the use of the DLA Vendor Shipment Module for bar-coded labels and requires invoicing through the Wide Area Workflow system with Net 30 payment terms. Additionally, the solicitation includes stringent security and compliance requirements, including CMMC Level requirements and prohibitions on specific telecommunications equipment from vendors such as Hytera, Hikvision, and Dahua.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

3 days ago

DEADLINE

in 11 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Get AI-powered intelligence on this solicitation and the ones like it

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS