Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CAPNOGRAPH KIT

Active
SPE2DS-26-T-308HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Capnograph Kit is a lightweight, battery-powered end-tidal carbon dioxide monitor designed for use with both adult and pediatric patients, delivering full accuracy in 15 seconds to measure EtCO2 and respiration rate with a continuous capnogram display. It operates on two AAA alkaline or lithium batteries, providing six hours of life with alkaline and up to ten hours with lithium cells. The device features a water-resistant design, requires no routine calibration, and includes an audible and visual alarm system that alerts for no adapter, clogged adapter, no breath, low battery, and adjustable high and low EtCO2 thresholds. The kit includes the capnometer, a pouch, and a lanyard and must be used with the specified NSN 6515-01-623-0942 airway adapter. It is regulated by the FDA and manufactured under approved part numbers by Masimo Corporation and Tribalco LLC. The unit of issue is a kit, and the contract requires eight kits to be delivered within twenty days to Joint Base Lewis McChord, Washington. All packaging and marking must comply with Medical Marking Standard No. 1 and ASTM D3951, with DLA Master List of Technical and Quality Requirements taking precedence. The kits must be sealed in commercial units capable of protecting against damage and packed in exterior shipping containers suitable for safe carrier delivery. The items must be labeled and palletized according to DLA packaging requirements and shipped via traceable means, excluding parcel post. Delivery is FOB destination with inspection and acceptance occurring at the delivery point, and no quantity variance is permitted. The acquisition is subject to federal procurement regulations, and bidders must specify the exact source and part number being supplied. The contract is administered under solicitation SPE2DS-26-T-308H, with a required delivery date of August 6, 2026, and direct contact for inquiries is Colin Owens of the Department of Defense Medical Supply Chain.

General Info

Eight FDA-approved capnograph kits with adapter, delivered FOB destination by August 6, 2026, to Joint Base Lewis McChord.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

456199 - All Other Health and Personal Care RetailersView NAICS

Place of Performance

BLDG 9141 SANSONE, JOINT BASE LEWIS MCCH, WA, 98433-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DS-26-T-308H Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
COLIN OWENS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAPNOGRAPH KIT
CAPNOGRAPH KIT
EMMA CAPNOGRAPH KIT (MMHG); LIGHTWEIGHT;
BATTERY POWERED (2 AAA CELL ALKALINE OR
LITHIUM); BATTERY LIFE: 6 HOURS ALKALINE,
10 HOURS LITHIUM; ETCO2 MONITOR FOR ADULT
AND PEDIATRICS; FULL ACCURACY IN 15
SECONDS TO MEASURE END-TIDAL CARBON DIOXIDE
(ETCO2) AND RESPIRATION RATE (RR);
CONTINUOUS CAPNOGRAM; WATER RESISTANT
DESIGN; NO ROUTINE CALIBRATION REQUIRED;
AUDIBLE AND VISUAL ALARM SYSTEM FOR NO
ADAPTER, CLOGGED ADAPTER, NO BREATH, LOW
BATTERY, AND ADJUSTABLE HIGH AND LOW ETCO2
ALARM;INCLUDES THE CAPNOMETER, POUCH, AND
LANYARD; REQUIRES USE OF NSN
6515-01-623-0942, ADAPTER, AIRWAY, CAPMOMETER
.
UNIT OF ISSUE KT(KIT)
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
SPE2DS-26-T-308H
SECTION B
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MASIMO CORPORATION 3BHG4 P/N 3639
TRIBALCO LLC 30TR5 P/N TICS.15.10273
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017720659 0001 KT 8.000
NSN/MATERIAL:6515016268691
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W91M1Z
0001 SF BN CO A GSB
AWCF SSF
9141 SANSONE
SPE2DS-26-T-308H
SECTION B
PR: 7017720659 PRLI: 0001 CONT’D
FORT LEWIS WA 98433-9500
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W804F1
0001 SF BN 03 DET
BLDG 9141 SANSONE
JOINT BASE LEWIS MCCH WA 98433-5000
US
MARKFOR
W804F1
0001 SF BN 03 DET
BLDG 9141 SANSONE
JOINT BASE LEWIS MCCH WA 98433-5000
US
M/F: (TCN) W804F162120009
RDD: 227
PROJ: TP 3
SUPP ADD: W91M1Z SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: ADV: 2A FC: AW
Need Ship Date:00/00/0000 Original Required Delivery Date:08/06/2026
SPE2DS-26-T-308H NSN/Part Number: 6515-01-626-8691 Quantity: 8 KT Purchase Request: 7017720659QTY: 8 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 456199
New
DIBBS
MAROPITANT CITRATE
Solicitation # SPE2DP-26-T-4497
Maropitant Citrate is a veterinary pharmaceutical product supplied as 160mg tablets in blister packs containing four tablets per package, with the unit of issue being a single package of four tablets. The product must be stored at controlled room temperature between 20–25°C (68–77°F), with allowable excursions between 15–30°C (59–86°F). It has a non-extendable shelf life of 36 months and is classified as a Type I (Code Q) item under federal procurement standards. Packaging and marking must conform to the latest edition of the Medical Marking Standard No. 1, superseding all references to MIL-STD-129, and each unit must be sealed in a container that protects against damage during transit. The product is regulated by the FDA, and buyers are required to submit referrals via EBS to confirm product eligibility before procurement. The item is procured under solicitation SPE2DP-26-T-4497 with a delivery requirement of 88 days FOB destination, and no variance in quantity is permitted. Delivery must be made to a U.S. military medical logistics center in APO AE 09227-0000, with a specified shipping address in Kaiserslautern, Germany. Approved suppliers include Zoetis Inc., Patterson Veterinary Supply, Inc., and Covetrus North America, LLC, each with designated part numbers and NDC codes. All packaging must meet commercial standards and be suitable for safe transport by common carrier at the lowest cost.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 456199
New
DIBBS
MOXIDECTIN INJECTIO
Solicitation # SPE2DP-26-T-4485
Moxidectin Injection, a veterinary product indicated for dogs 12 months of age and older, is supplied as a 10 mL vial containing 10% moxidectin microspheres (889 mg per vial) along with an 8 mL vial of sterile vehicle and a vent needle for reconstitution. The product is intended for subcutaneous administration only and is packaged as a single kit unit. The unconstituted product must be stored at or below 25°C (77°F) and protected from prolonged light exposure; once reconstituted, it remains stable for eight weeks when refrigerated at 2–8°C (36–46°F). It is classified as a TYPE I (CODE M) item with a non-extendable shelf life of 24 months and must comply with the Medical Marking Standard No. 1, superseding MIL-STD-129, and packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements. This product is regulated by the FDA and requires referral to a product specialist for confirmation prior to procurement. The contract, issued under solicitation SPE2DP-26-T-4485, specifies a quantity of five kits to be delivered within 20 days to Fort Sam Houston, Texas, under FOB destination terms with no variance allowed in quantity. Delivery must occur via traceable means, excluding parcel post, and the material must be clearly marked per government standards with applicable supply chain identifiers. The contract is managed by the Department of Defense’s Medical Supply Chain, with deliveries required by August 6, 2026, and responses due by August 10, 2026. Only approved manufacturers—Zoetis Inc., Patterson Veterinary Supply, and Covetrus North America, LLC—are eligible, and all supplies must be packaged in commercial-grade sealed containers capable of ensuring safe transport and protection from damage. All documentation and requirements referenced, including the DLA Master List of Technical and Quality Requirements, must be strictly followed.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
POINT, ENDODONTIC
Solicitation # SPE2DH-26-T-5783
The contract is for POINT ENDODONTIC GUTTA PERCHA POINTS, specifically the 120S model, color-coded, assorted sizes ranging from 45 to 80, with a length of 30 millimeters, supplied in a box of 120 units. The item is identified by NSN 6520-01-643-3521 and is being procured in a single box quantity under purchase request 7017732381. Delivery is required within 20 days of award. The product must comply with technical and quality requirements referenced from the DLA Master List, and packaging must meet DLA specifications. The supply is subject to requirements for the removal of government identification from non-accepted items and may involve covered defense information. Bidders are required to clearly state the source and part number being offered. The solicitation number is SPE2DH-26-T-5783, issued on August 4, 2026, with responses due by August 11, 2026. The contracting activity falls under the Department of Defense through the Medical Supply Chain FSH office, and the delivery location is APO, ZIP code 09094-3219. Primary point of contact is Tina Vu, reachable via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 456199
New
DIBBS
OCLACITINIB MALEATE TA
Solicitation # SPE2DP-26-T-4474
Oclacitinib maleate tablets, marketed as Apoquel 16mg, are prescribed for the control of pruritus associated with allergic dermatitis and the management of atopic dermatitis in dogs. The contract specifies procurement of 2 bottles, each containing 100 tablets, with a total quantity of 200 tablets. The product is subject to strict storage requirements, necessitating controlled room temperature between 20°C and 25°C (68°F to 77°F), with allowable excursions between 15°C and 40°C (59°F to 104°F). The item has a non-extendable shelf life of 36 months and is classified as a Type I (Code Q) medical item under DLA packaging standards. Packaging and marking must strictly comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must adhere to all applicable DLA packaging and procurement requirements, including palletization and unit containment specifications. The product is regulated by the FDA, and suppliers must provide full manufacturer and item details for government referral and confirmation. Delivery is FOB destination, with a required delivery window of 89 days from the contract award, and the items must be shipped to the designated U.S. military medical supply center in Kaiserslautern, Germany, with final delivery addressed to APO AE 09227-0000. No variance in quantity is permitted, and inspection and acceptance occur at the destination. Compliance with all technical, quality, and logistics requirements outlined in the DLA Master List of Technical and Quality Requirements is mandatory.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
INTUBATION KIT
Solicitation # SPE2DS-26-T-302M
The intubation kit is a disposable medical device containing one endotracheal tube with a stylet, one 10 cc syringe, one Velcro tube tie, and one pack of surgical lubricant, offered as a single unit. The kit must have a minimum shelf life of 24 months, with no more than three months elapsed between the date of manufacture and delivery to the government. All packaging must include the NSN, manufacturer name, CAGE code, date of manufacture, expiration or retest date, and the contract or lot number to ensure traceability and compliance. Technical and quality requirements referenced under RA001, RQ011, and RP001 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on acquisition type. The product is identified by NSN 6515-01-632-4831, with a purchase request of 7017710662QTY: 1, and delivery is required within 20 days of award. The solicitation, issued under contract number SPE2DS-26-T-302M, is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance location at Hurlburht Field, Florida, and primary point of contact James Burke at james.burkejr@dla.mil.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
FRAME, SPECTACLE
Solicitation # SPE2DS-26-T-303F
The contract is for a spectacle frame identified by NSN 6540-01-631-0585, with a unit of issue of each and a required quantity of one unit. The item features black spring hinge temples and must comply with the DLA Packaging Requirements for Procurement, as well as technical and quality specifications referenced by R and I numbers in the DLA Master List of Technical and Quality Requirements, which governs compliance based on the solicitation or award date depending on acquisition size. Bidders must clearly state the source and part number being supplied, and any supplies not accepted must have government identification removed prior to delivery. The purchase request number is 7017710736, with delivery required within 20 days after award. The solicitation number is SPE2DS-26-T-303F, posted on August 3, 2026, with responses due by August 10, 2026. The NAICS code is 456199, and the contracting organization is the Department of Defense’s Medical Supply Chain under the MD Surg FSF, with performance located at Fort Hood, Texas, 76544. Primary point of contact is Seth Tootell, reachable via email and phone listed in the contract data.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
FRAME, SPECTACLE
Solicitation # SPE2DS-26-T-303P
The contract pertains to the procurement of a spectacle frame designated by the NSN 6540-01-631-0588, with a single unit required and delivery expected within 20 days after order. The frame features black spring hinge temples and must comply with the DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date depending on procurement scale. Bidders are required to clearly identify the source and part number being supplied to ensure alignment with specifications. This solicitation, issued under number SPE2DS-26-T-303P on August 3, 2026, with a response deadline of August 10, 2026, is categorized under NAICS code 456199 and is administered by the Department of Defense through the Medical Supply Chain MD Surg FSF office. Performance is required at Fort Hood, Texas, with Seth Tootell listed as the primary point of contact for inquiries.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
LUBRICANT, SURGICAL
Solicitation # SPE2DP-26-T-4465
Surgical lubricant, sterile, latex-free, water-soluble, and bacteriostatic, containing parabens, is supplied in foil packets, each containing 2.7 grams, with a unit of issue as a box of 144 packets. The product must be stored at 20° to 25°C (68° to 77°F) and has a non-extendable shelf life of 36 months. Packaging, marking, and shipping must conform to the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging must be commercial, sealed, and designed to protect contents from damage during transit. The item is regulated by the FDA and requires compliance with DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Each shipment must be traceably transported, prohibiting parcel post, and must include specific forwarding addresses for APO and overseas destinations. The contract spans multiple CLINs with identical NSN 6505016265774 and product specifications, totaling five boxes, with delivery required within 20 days of award, FOB destination, and zero variance allowed. All documentation must reference the latest revision of DLA’s packaging standards, and procurement must adhere strictly to DLA’s designated unit of issue and marking protocols.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
CATHETERIZATION KIT, PN
Solicitation # SPE2DS-26-T-303W
The contract specifies the procurement of a pneumothorax catheterization kit, a medical device regulated by the FDA, containing a 11 FR catheter 13 cm in length along with a complete set of surgical and suction components including a thoracic vent, trocar, double-valved aspiration cannula, suction tubing, two syringes (60 cc and 3 cc), two safety needles (25G and 22G), a scalpel, Halsted forceps, gauze sponges, a fenestrated drape, CSR wrap, an occlusion plug, and associated sterile packaging. Each unit must be sealed in a protective container and shipped in commercial exterior packaging suitable for safe delivery via common carrier at the lowest cost to the designated destination. The item must have a 36-month shelf life, with no more than five months elapsed from manufacture to delivery, and must be clearly labeled per Medical Marking Standard No. 1, superseding MIL-STD-129. Packaging must comply with ASTM D3951 but is subject to higher precedence by DLA Master List technical and quality requirements. The unit of issue is each, and the contract requires a delivery of one unit within 20 days to Hurlbert Field, Florida, with no tolerance for variance in quantity. The item is identified by NSN 6515-01-632-2087 and supplier part numbers from Owens & Minor (6597TV1113) and Uresil LLC (TV11-13). All bids must include the manufacturer’s part number and source. Shipping must be traceable, explicitly prohibiting parcel post, and all documentation, including FDA referrals, must be submitted by the contractor per DLA protocol. The solicitation is issued under SPE2DS-26-T-303W with a response deadline of August 10, 2026, and a required delivery date of August 5, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
LUBRICANT, SURGICAL
Solicitation # SPE2DP-26-T-4417
The contract is for surgical lubricant, a sterile, latex-free, water-soluble jelly containing parabens, with each foil packet containing 2.7 grams and packaged in boxes of 144 packets as the unit of issue. The product must comply with strict technical and quality requirements outlined in the DLA Master List, and all packaging and marking must adhere to the Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item has a non-extendable shelf life of 36 months and must be stored at 20°C to 25°C (68°F to 77°F). It is regulated by the FDA and classified as a TYPE I (CODE Q) item with specific shelf-life controls. The supplier, MEDLINE INDUSTRIES, LP, must provide the item under part number MDS032273H, and the NSN is 6505-01-626-5774. The contract requires delivery of one box within 20 days to a designated military destination, with FOB destination terms and zero variance permitted on quantity. All packaging must be commercial-grade, sealed, and designed for safe transit with minimal cost to ensure unharmed delivery. The item must be marked according to MMS No. 1, and transportation details are governed by DLAD procedural notes. The contract is issued under solicitation SPE2DP-26-T-4417 with a required delivery date of August 4, 2026, and the point of contact is Nicholas Quigley of the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
PAPER, MEDICAL RECORDIN
Solicitation # SPE2DS-26-T-298U
The contract specifies the procurement of medical recording paper intended for use with Propaq MD and X defibrillator monitor systems, with each unit consisting of a box containing six individual sheets. The packaging must comply with commercial standards outlined in the procurement documentation, requiring each complete unit to be sealed in a container that safeguards against damage or breakage, and all units must be shipped in exterior containers suitable for safe transport by common carriers at the lowest available rate to the designated delivery point. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must reference the NSN/Part Number 6515-01-628-6597 while clearly identifying the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is required within 20 days after order, under solicitation SPE2DS-26-T-298U, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance located at Tinker AFB, Oklahoma, and primary point of contact Marc Canalichio.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
CATHETER AND NEEDLE UN
Solicitation # SPE2DS-26-T-299Y
The contract specifies the procurement of 84 units of a sterile, disposable, latex-free intravenous catheter and needle unit designed for decompression of pneumothorax, featuring a 14-gauge by 3.25-inch long stainless steel needle and a radiopaque F.E.P. polymer catheter with a luer-lock connection. Each unit must have a mandatory 60-month shelf life, with no more than nine months elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA Packaging Requirements, adhering strictly to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all units must be sealed in protective containers and packed in commercial shipping containers suitable for safe transport at the lowest carrier rate to the delivery point. The unit of issue is each (EA), and the quantity is fixed with zero variance allowed. Delivery is required FOB destination within five days of contract award, with inspection and acceptance occurring at the delivery point. All packaging and labeling must follow ASTM D3951 unless superseded by DLA Master List technical or quality requirements, and palletization must conform to DLA standards. The shipment must be sent via the fastest traceable means, excluding parcel post, to the specified military address at Fort Lewis, Washington, under contract SPE2DS-26-T-299Y. The item’s NSN is 6515-01-626-7948, and the procurement is governed under federal acquisition protocols with no set-aside type specified.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 325413
New
DIBBS
CONTROL, RESPIRATORY PA
Solicitation # SPE2DS-26-T-311F
The BioFire RP2.1/RP2.1plus Control Panel is a synthetic nucleic acid-based quality control product consisting of 12 vials, each containing 300 microliters of a non-infectious buffer solution with stabilizers and preservatives. It is designed for in vitro use with the FilmArray instrument to monitor the detection and identification of respiratory pathogens during RP2.1 panel testing. Each kit provides sufficient reagent for six quality control runs, including six positive and six negative controls. The product requires strict frozenstorage between -25°C and -15°C (-13°F to 5°F) and has a non-extendable shelf life of 18 months, with no more than two months allowed to have passed from the date of manufacture to delivery to the government. Labeling must include the date of manufacture, expiration date, contract number, and lot number in compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards, ensuring protection against damage, with exterior containers suitable for safe transport at the lowest cost to the specified delivery point. The item is governed by DLA technical and packaging requirements, including RS013 for shelf life, RP001 for packaging standards, and RD003 for potential covered defense information. The National Stock Number is 6550-01-690-4435, with a procurement quantity of three kits under solicitation SPE2DS-26-T-311F, with a delivery deadline of 83 days after award.
In-Vitro Diagnostic Substance Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
GLOVE, PATIENT EXAMININ
Solicitation # SPE2DS-26-T-311L
The contract specifies the procurement of 10 packages, each containing 100 black, latex-free, powder-free nitrile exam gloves designed for special-forces operations. Each glove is large size, ambidextrous, non-sterile, and features a beaded cuff with a micro-roughened finish to enhance grip. The gloves have a palm thickness of 0.16 plus 0.03 millimeters, a palm weight exceeding 105 millimeters, and a length of 240 millimeters, classified as heavy-gauge for durability in demanding environments. The unit of issue is a package of 100 gloves, and the total quantity requested is 10 packages. Compliance with DLA packaging requirements and technical specifications referenced in the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date. The government identification on non-accepted supplies must be removed per RQ011. The NSN is 6515-01-515-0197, associated with purchase request 7017754214, and delivery is required within five days of award. The solicitation, identified as SPE2DS-26-T-311L, was posted on August 5, 2026, with responses due by August 11, 2026, under NAICS code 339113 for medical device manufacturing. Performance is required at Fort Bragg, North Carolina, with primary point of contact Aidan Martz at the Department of Defense’s Medical Supply Chain.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, CARBON DIOXID
Solicitation # SPE2DS-26-T-310Q
The contract specifies the procurement of two carbon dioxide gas detectors, identified by NSN 6515-01-588-7389, for delivery to Fort Wainwright, Alaska, with a strict five-day absolute delivery obligation. Each unit must be individually sealed in a protective container to prevent damage or breakage and packed in commercial exterior shipping containers suitable for safe transport via common carrier at the lowest possible cost, with export packaging required if necessary. All packaging and marking must comply fully with Medical Marking Standard No. 1, replacing any reference to MIL-STD-129, and bidders are required to clearly state the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contract falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Brooke Webb as the primary point of contact. RD003 indicates potential covered defense information, and all supplies must adhere to DLA packaging requirements and the rule requiring removal of government identification from non-accepted items.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SUPPORT, ARCH
Solicitation # SPE2DS-26-T-311E
This contract solicits a pair of full-length corrective arch support devices designed for men’s sizes 10–11 and women’s sizes 11–12, to be worn inside shoes. The items are green in color and must meet technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. The product is identified by NSN 6515-01-387-2743 and is requested in a quantity of two units, with delivery required within 84 days of award to APO ZIP 09227-0000. Bidders must clearly state the source and part number being supplied and comply with DLA packaging requirements, as well as the provision for removal of government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-311E, issued under NAICS code 339113 by the Department of Defense’s Medical Supply Chain organization, with a response deadline of August 11, 2026, and point of contact Elizabeth Cruz for inquiries. Covered defense information may apply, and all submissions must adhere to the specified acquisition protocols.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SYRINGE, IRRIGATING
Solicitation # SPE2DS-26-T-311K
The item is a 60 cc irrigating syringe with dual graduations—marked in 5 cc increments up to 60 cc and in 1/4 oz increments up to 2 oz—featuring a catheter tip designed for surgical use in operating room procedures. It is autoclavable and supplied in hard pack, ensuring sterility and durability under repeated sterilization. Each unit must be individually sealed in a protected container to prevent damage or breakage, and shipped in commercial exterior containers suitable for safe transportation via common carriers at the lowest cost to the specified delivery point, which is Point Mugu, CA, 93042-0001. The packaging and marking must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and full compliance documentation is accessible through DLA Troop Support. The unit of issue is a package of 100 syringes, and the item carries a non-extendable 24-month shelf life as a Type I (Code M) item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date. The item is covered under Defense Information regulations and must be supplied with accurate source and part number information. The contract is issued under solicitation SPE2DS-26-T-311K with a bid deadline of August 11, 2026, and a delivery requirement of 20 days after order placement.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBE, TRACHEOSTOMY
Solicitation # SPE2DS-26-T-311B
The contract specifies the procurement of two Shiley Adult Flexible Tracheotomy Tubes with TaperGuard Cuff, each featuring a single cannula design, an inside diameter of 7.5 mm, an outside diameter of 10.8 mm, and an inner cannula inside diameter of 6.5 mm, with a cuff resting diameter of 25.4 mm. These are disposable, sterile, and must meet stringent shelf life requirements, including a maximum of 72 months from manufacture to expiration and no more than 10 months elapsed from manufacture to delivery to the government. The tubes are identified by NSN 6515-01-735-1484 and must be sourced with the exact part number, as specified in the solicitation. Packaging and delivery must comply with DLA Packaging Requirements, and all technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. The contract is issued under solicitation SPE2DS-26-T-311B, with bids due by August 11, 2026, and delivery required within five days of award to the designated performance location at JBER, Alaska, 99506-4400. The primary point of contact is Brooke Webb from the Department of Defense’s Medical Supply Chain, and all submissions must remove any government identification from non-accepted supplies as per RQ011 requirements.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
GLOVES, CHEMICAL PROTEC
Solicitation # SPE2DS-26-T-310R
The gloves are chemical protective, made of nitrile, and designed to be disposable, non-sterile, powder-free, latex-free, silicone-free, and antistatic with a chlorinated surface and smooth exterior. They feature a beaded cuff, are colored green, and measure 240 millimeters or 9.5 inches in length with a palm thickness of 0.12 millimeters or 4.7 mils and finger thickness of 0.16 millimeters or 6.2 mils. Each unit is packed in a box containing 100 gloves and must comply with DLA packaging and technical requirements as specified in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The government identification must be removed from any non-accepted supplies. The item is identified by NSN 6515-01-693-8297 with a purchase request number of 7017739038, quantity of one box, and a delivery requirement of 20 days after award. The solicitation number is SPE2DS-26-T-310R, issued on August 5, 2026, with responses due by August 11, 2026, under NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain MD Surg FSF office located in San Antonio, Texas, with Aidan Martz as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CUFF, SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-311C
The contract specifies the procurement of a pediatric non-invasive blood pressure cuff with specific bladder dimensions: 3.5 inches in width and 7.1 inches in length, designed for limb circumferences between 18 and 26 centimeters. The item is identified by NSN 6515-01-593-8773 and is a replacement for earlier part numbers 6515-01-582-4060 and 6515-01-582-4072. The unit of issue is each (EA), with a total quantity of four units required, delivered FOB destination within 20 days of the contract award. The product must meet strict packaging and marking standards per Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging must comply with ASTM D3951 and DLA’s Packaging Requirements for Procurement (RP001). All items must be sealed in suitable containers to prevent damage and packed in commercial shipping containers that ensure safe delivery at the lowest carrier rate. Labeling, palletization, and handling must adhere to DLA requirements, and parcel post is explicitly prohibited; shipment must be traceable. The delivery point is a Department of Defense facility in San Antonio, Texas, with the government specifying that no government identification may be removed from non-accepted supplies. The contract references the DLA Master List of Technical and Quality Requirements as the governing standard, with precedence over any other specifications. The supplier, Philips North America LLC, is identified by part number 40401B, and the solicitation number is SPE2DS-26-T-311C with a required delivery date of August 6, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
RETAINER, TUBE, TRACHEAL
Solicitation # SPE2DS-26-T-310Y
The contract specifies the procurement of a single unit of a tracheal tube retainer compatible with the Save Ventilator identified by NSN 6515-01-571-1689, manufactured by Laerdal and listed under NSN 6515-01-588-5834. The item is designated for use in medical acquisitions and must be packaged in commercial containment that ensures protection against damage or breakage, with all units sealed in appropriate individual containers and grouped in exterior shipping containers suitable for safe transport via common carriers at the lowest cost to the delivery point in Fort Wainwright, Alaska. All packaging and marking must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of this standard are available through DLA Troop Support. The item is subject to technical and quality requirements outlined in the DLA Master List, and the applicable revision of that list is determined by the solicitation or award date. The solicitation, issued under SPE2DS-26-T-310Y, requires responses by August 11, 2026, with a five-day delivery deadline after award. The contracting office is the Department of Defense’s Medical Supply Chain MD Surg FSF, and primary point of contact is James Burke.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 621410
New
DIBBS
PLASMA CONTROL, NORMAL
Solicitation # SPE2DS-26-T-310P
PLASMA CONTROL, NORMAL LEVEL is a quality control solution designed for citrated plasma samples used in prothrombin time and activated partial thromboplastin time coagulation testing. It is intended exclusively for use with citrated PT and APTT cuvettes on the Coagulation Analyzer NS 6630 and comes in a kit of 15 vials packaged in 4 sleeves. The product must be stored refrigerated between 2 and 8 degrees Celsius and has a non-extendable shelf life of nine months. It is classified as a Type I (Code G) medical item regulated by the FDA and requires proper handling, labeling, and packaging in compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item is supplied by WERFEN USA LLC under part number 000DCJCPT-N and is identified by NSN 6550-01-519-7696. The contract specifies delivery within five days FOB destination with zero tolerance for quantity variance and inspection and acceptance occurring at the delivery point. Packaging must meet MIL-STD-2073-1E standards, ensuring protection during transit via commercial carriers at the lowest cost, with exterior containers suitable for export if required. All supplies must be marked in accordance with MMS No. 1, and government identification must be removed from non-accepted items. The solicitation number is SPE2DS-26-T-310P with a response deadline of August 11, 2026, and the procurement is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at JBER, AK. Bidder information including manufacturer details and part numbers must be provided during submission.
Family Planning Centers

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBE, TRACHEAL
Solicitation # SPE2DS-26-T-311D
This tracheal tube is designed exclusively for veterinary use and is manufactured from clear medical-grade PVC with an inner diameter of 11 millimeters (33 French) and a total length of 520 millimeters. The device features a specially engineered high-volume, low-pressure cuff that is firmly secured, along with a pilot balloon equipped with a spring-loaded one-way valve for reliable inflation control. It includes a non-tapered standard 15mm connector, a beveled tip with a Murphy eye to reduce the risk of obstruction, and clear insertion depth indication marks with 1cm graduations for precise placement. The tube is radiopaque for enhanced visibility under imaging and is supplied in sterile packaging. Shelf life is strictly regulated at 36 months from date of manufacture, with no more than five months allowed to have elapsed between manufacturing and government delivery. The unit of issue is each, and the item is identified by NSN 6515-01-733-0824 with a procurement quantity of 10 units. The contract, issued under solicitation SPE2DS-26-T-311D by the Department of Defense’s Medical Supply Chain under the agency name MEDICAL SUPPLY CHAIN MD SURG FSF, requires delivery within 20 days of award to San Antonio, Texas, 78226. The solicitation was posted on August 5, 2026, with responses due by August 11, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I codes, and packaging must comply with DLA standards. Government identification must be removed from any non-accepted items. The NAICS code 339112 confirms classification under Surgical and Medical Instrument Manufacturing. Primary point of contact is Patrick Esposito, reachable via email and phone listed in the contract data.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, NASOPHARYNGEAL
Solicitation # SPE2DS-26-T-310S
The contract specifies the procurement of 84 disposable, sterile nasopharyngeal airways made of plastic with a 7 mm diameter and 28 FR size, designed exclusively for emergency airway passage. Each unit must have a shelf life of 60 months, and no more than nine months may have elapsed between the manufacturer’s production date and the delivery date to the government. The item is identified by NSN 6515-01-444-5416 and is sold in units of each. Bidders are required to state the source and part number they are supplying. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. The solicitation number is SPE2DS-26-T-310S, with responses due by August 11, 2026, and a delivery requirement of five days after award, to be performed at Fort Bragg, North Carolina, with the contracting agency being the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details