Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CARBON DIOXIDE

Active
SPE2DP-26-T-4493Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Carbon Dioxide, Technical, USP Cylinder Type E, is being procured in quantities of two units, each containing 6 pounds of gas at a minimum purity of 99.5 percent, pressurized to 1800 PSI, with a total filled weight of 20 pounds excluding the cap. The unit of issue is each (EA), and the material must conform to Medical Marking Standard No. 1, which replaces all references to MIL-STD-129; copies of this standard are available from DLA Troop Support via email or their official website. Each cylinder must be securely packaged in a sealed container to prevent damage or breakage, and shipped in commercially appropriate exterior containers that ensure safe delivery by common carrier at the lowest possible rate to the designated delivery point. Packaging requirements are governed by DLA Packaging Requirements for Procurement, and technical and quality specifications are referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. The item is identified by NSN 6505-01-212-7489 under Purchase Request 7017735431, with a delivery requirement of 20 days from award. Bidders must clearly state the source and part number being offered, and all supplies must comply with government guidelines for removal of identification from non-accepted items. The solicitation, issued under SPE2DP-26-T-4493 on August 4, 2026, with a response deadline of August 10, 2026, is managed by the Department of Defense’s Medical Supply Chain Pharm FSA, with Shairy M. Cartagena as the primary point of contact.

General Info

Two 6-pound USP CO2 cylinders, 99.5% purity, 1800 PSI, delivered in 20 days per NSN 6505-01-212-7489.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSAView Agency

NAICS

325412 - Pharmaceutical Preparation ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE2DP-26-T-4493.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
View Agency Profile
Office AddressUS
Contacts
Shairy M. Cartagena
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CARBON DIOXIDE
CARBON DIOXIDE, TECHNICAL
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
CARBON DIOXIDE GAS USP CYLINDER TYPE E. WEIGHT FILLED WITHOUT CAP IS 20 LBS; WEIGHT OF GAS IS 6 LBS; 1800 PSI. PURITY SHALL BE 99.5 PERCENT MINIMUM
UNIT OF ISSUE EACH (EA)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
. BIDDER: PLEASE SPECIFY SOURCE AND PART NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6505-01-212-7489 Quantity: 2 EA Purchase Request: 7017735431QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325412
New
DIBBS
ISOPROPYL ALCOHOL
Solicitation # SPE2DP-26-T-4494
ISOPROPYL ALCOHOL USP, commonly known as rubbing alcohol, is a 99% isopropanol solution supplied in 473-milliliter bottles, equivalent to one pint or 16 ounces, and is classified as an over-the-counter product regulated by the FDA. It is highly flammable, poses serious eye irritation risks, and may cause drowsiness or dizziness, requiring storage at 20° to 25°C (68° to 77°F) away from heat, sparks, open flames, and hot surfaces with strict no-smoking protocols. The item is identified by NSN 6505-00-205-6513 and must comply with applicable hazardous materials regulations including 49 CFR and ICAO technical instructions. A current Material Safety Data Sheet (MSDS) is mandatory and must accompany each shipment, submitted electronically to DLA.MSDS@DLA.MIL alongside the required cover sheet P-75. Packaging must meet hazardous materials standards, and government identification must be removed from non-accepted supplies. This procurement is governed by DLA’s Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation, issued under SPE2DP-26-T-4494 on August 4, 2026, with a response deadline of August 10, 2026, is for four bottles with a required delivery within five days to Pascagoula, Mississippi, under the NAICS code 325412, managed by the Department of Defense’s Medical Supply Chain Pharma FSA. All bidders must provide manufacturer details, part numbers, and item descriptions for FDA referral via EBS.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
BUPIVACAINE AND EPINEP
Solicitation # SPE2DP-26-T-4478
The contract specifies the procurement of Bupivacaine and Epinephrine Injection, containing 0.500% w/v Bupivacaine HCl and 0.005 mg Epinephrine per mL (1:200,000), packaged in 1.8 mL cartridges, with a unit of issue of one case containing 50 cartridges. The product must be stored at controlled room temperature between 15 and 30 degrees Celsius and must have a minimum shelf life of 15 months at the time of delivery to the first government activity, despite an 18-month maximum shelf life. All packaging and labeling must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and must be commercially packaged to ensure safe transit under ASTM D3951 or applicable hazardous material standards if classified as hazardous under FED-STD-313. The supply must be free of intentional mercury or mercury compounds, except where functionally necessary and explicitly exempted, and any permitted mercury-containing components must meet Navy shockproof and secondary containment requirements. Delivery is required FOB destination within 20 days to the USS Delaware (SSN 791) at FPO AE 09583, with no variance allowed in quantity, and shipment must use traceable, expedited methods with no parcel post. The item is identified by NSN 6505-01-189-3973 and purchase request 7017729383, with a required delivery date of August 6, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
VERAPAMIL HYDROCHLO
Solicitation # SPE2DP-26-T-4480
Verapamil Hydrochloride Extended-Release Tablets, 240 mg, are being procured in bottles of 100 tablets each, with a total quantity of two bottles required under contract SPE2DP-26-T-4480. The product must have a minimum of 31 months of shelf life remaining at the time of delivery, with a full 36-month shelf life specified and non-extendable. Packaging must comply strictly with DLA Packaging Requirements for Procurement and the latest Medical Marking Standard No. 1, superseding MIL-STD-129, and must ensure protection from damage during transit. All units must be commercially packaged in suitable exterior shipping containers, meeting the lowest freight rate standard for delivery to the specified destination. The item is regulated by the FDA, and the contracting official must confirm compliance via EBS referral. Manufacturer and distributor information includes Glenmark Pharmaceuticals Inc., USA and Cardinal Health 200, LLC, with the NDC number NDC68462-0260-01. The delivery is FOB destination, with a 20-day delivery window and no quantity variance permitted. Shipment must be traceable and cannot be sent via parcel post; instead, it must be transported using the FASTEST TRACEABLE MEANS with RDD 777 and referenced to the DLA vendor code V23027. The required delivery date is February 17, 2026, and the item is to be delivered to USS IWO JIMA LHD 7, FPO AA 34094. All packaging, labeling, and documentation must adhere to applicable DLA technical and quality requirements listed in the DLA Master List, which take precedence over ASTM D3951 and other commercial standards.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
PERMETHRIN CREAM RINSE
Solicitation # SPE2DP-26-T-4477
Permectrin Cream Rinse is a 1% w/v topical medication packaged as a 2 fl oz plastic squeeze bottle, each unit including a comb for application, and supplied in individual units with a minimum of 21 months of remaining shelf life at time of receipt by the government, ensuring a 24-month total shelf life is maintained. The item is regulated by the FDA and must comply with all applicable medical, packaging, and hazardous materials standards including Medical Marking Standard No. 1, which supersedes MIL-STD-129, and packaging requirements that ensure protection from damage during shipping and compliance with commercial standards for both interior and exterior containers. All shipments must include a current Safety Data Sheet (SDS) formatted per 29 C.F.R. 1910.1200, with labels meeting OSHA’s Hazard Communication Standard and the Globally Harmonized System, and these documents must be submitted for approval before contract award. Each shipment must also carry a copy of the SDS and be marked in accordance with the approved medical marking guidelines. The product is subject to DLA’s technical and quality requirements as outlined in the DLA Master List, and must comply with all applicable transportation regulations including 49 CFR and ICAO standards for hazardous materials. The NSN is 6505-01-256-4972, with two units requested under solicitation SPE2DP-26-T-4477, with a 20-day delivery requirement and a contract awarded to a government activity under the Department of Defense.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
SODIUM PERBORATE
Solicitation # SPE2DP-26-T-4492
Sodium perborate in powder form, packaged in 100-gram bottles, is procured under contract SPE2DP-26-T-4492 for delivery to USS PORTLAND LPD 27 in San Diego, California. The item has a strict 36-month shelf life that is non-extendable and must be stored away from high humidity and temperatures exceeding 32 degrees Celsius, with separation from flammable materials. It is subject to defense information protections and incorporates technical and quality requirements from the DLA Master List, which supersede commercial standards. Packaging must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and adhere to DLA packaging specifications including palletization and hazardous material handling if applicable. The item is regulated by the FDA, requiring referral through EBS for product specialist confirmation. Delivery is FOB destination within 20 days, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The sole unit of issue is the bottle (BT), with one bottle ordered, and the NSN is 6505-01-307-3268. The contract identifies approved suppliers including Sultan Chemists Inc, Henry Schein Inc, and Patterson Dental Supply, with specific part numbers. Transportation procedures follow DLA directives, and the shipment must be labeled with the provided TCN and reference codes. The original required delivery date is August 6, 2026, with a response deadline of August 10, 2026 for the solicitation.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
CLINDAMYCIN PHOSPHA
Solicitation # SPE2DP-26-T-4488
CLINDAMYCIN PHOSPHATE TOPICAL SOLUTION, USP, is being procured under contract SPE2DP-26-T4488 with a quantity of 4 bottles, each containing 60 mL, identified by NSN 6505-01-116-5655 and NDC codes including PHARMACIA/UPJOHN 00009-3116-02 and FOUGERA 00168-0201-60. The product must be stored at controlled room temperature and protected from freezing. Packaging requirements mandate commercial standard unit containers that safeguard against damage or breakage, packed in suitable exterior shipping containers compliant with carrier requirements for safe, cost-effective delivery to the specified point. All labeling must adhere to Medical Marking Standard No. 1, replacing MIL-STD-129, and copies of this standard are available via DLA Troop Support. The solution is subject to hazardous materials regulations, requiring a current Material Safety Data Sheet to accompany each shipment and be submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet. Mercury and mercury-containing compounds are strictly prohibited in the product or its packaging except for limited, specified exemptions. The item is not TAA compliant under the Greenstone NDC code. Technical and quality requirements are governed by the DLA Master List, with revisions effective as of the solicitation date. Delivery is due within 10 days of award.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
SODIUM CHLORIDE INJ
Solicitation # SPE2DP-26-T-4367
Sodium Chloride 0.9% Injection, USP, 500 mL, 24 units per pack, is being procured under solicitation SPE2DP-26-T-4367 for delivery to the USS NEW ORLEANS LPD 18 at FPO AP 96673, with a required delivery window of 20 days after order placement and FOB Destination terms. The contract specifies a quantity of 10 packing groups, each containing 24 units, and mandates strict adherence to medical packaging and labeling standards, superseding MIL-STD-129 with Medical Marking Standard No. 1. The product is regulated by the FDA, and the contracting official must refer bidders through EBS for product specialist confirmation, including manufacturer details and NDC numbers. Packaging must be commercial and compliant with ASTM D3951 for non-hazardous materials, but DLA’s Master List of Technical and Quality Requirements takes precedence. A 24-month non-extendable shelf life applies, and mercury or mercury-containing compounds are prohibited unless exempted for specific functional uses such as batteries or instruments, with additional containment requirements per NAVSEA 5100-003D. Hazardous material handling must follow FED-STD-313 and TQ Requirement IP025, with labeling per OSHA’s Hazard Communication Standard. The item is subject to DFARS clauses covering safeguarding covered defense information, prohibition of certain telecommunications equipment, whistleblower rights, and restrictions on toxic or hazardous materials. Offerors must provide UEI and CAGE codes, represent their small business status if applicable, and comply with trafficking in persons, employment eligibility verification, and sustainable product requirements. All submissions must be made through DIBBS by August 4, 2026, and the contract will be evaluated under likely Low Price Technically Acceptable criteria. Payment will be processed via WAWF, and inspection and acceptance occur at the delivery point. Multiple manufacturers are listed as qualified suppliers, including Baxter Healthcare, B. Braun Medical, Cardinal Health, McKesson, and ICU Medical, each identified by their part numbers and NDC codes.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 325412
New
DIBBS
TEST STRIPS AND COLOR
Solicitation # SPE2DS-26-T-305V
The contract specifies the procurement of test strips and color charts designed for urinalysis, detecting bilirubin, blood, glucose, ketone, leukocytes, nitrite, pH, protein, specific gravity, and urobilinogen. Each unit is packaged as a bottle containing 100 strips, with a total of three bottles required. The item, identified by NSN 6550-01-221-5400, must comply with stringent technical and quality standards referenced from the DLA Master List, and is subject to DLA packaging requirements, including commercial packaging standards and the Medical Marking Standard No. 1, which replaces MIL-STD-129. All packaging must ensure protection during transit and meet export requirements where applicable, with markings conforming to MMS1C for date of manufacture, expiration, contract number, and lot number. The product has a non-extendable shelf life of 18 months, and no more than two months may have passed from the date of manufacture to the delivery date to the government. Delivery is required within 20 days of award, and the contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office, with performance directed to Pearl Harbor, Hawaii. The solicitation, issued under SPE2DS-26-T-305V, was posted on August 4, 2026, with responses due by August 10, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
GLOBULIN, RHO (D) IMMUN
Solicitation # SPE2DP-26-T-4482
GLOBULIN RHO (D) IMMUNE, USP, 300 MICROGRAMS per 1ML disposable syringe with safety mechanism, is intended for intramuscular injection only and is designated for adult use. The product must be stored at 2 to 8 degrees Celsius and must not be frozen. It is a prescription-only item and packaged individually as a single unit. The item is regulated by the FDA and requires confirmation through the EBS referral system, including submission of bidder and manufacturer details. The NSN is 6505-01-417-1250, and it is subject to DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements. As a hazardous material, it requires a current Material Safety Data Sheet (MSDS) to be submitted to DLA.MSDS@DLA.MIL and physically included with each shipment, with packaging compliant with 49 CFR and ICAO regulations. This solicitation, issued under SPE2DP-26-T-4482 by the Department of Defense’s Medical Supply Chain PHARM FSA, has a response deadline of August 10, 2026, with a delivery requirement of 20 days after award. The point of contact for inquiries is James Foggie, with email and phone provided for coordination.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
APPLICATOR, SILVER NITR
Solicitation # SPE2DP-26-T-4469
The applicator consists of a 75% silver nitrate and 25% potassium nitrate mixture fused to one end, measuring six inches or 1.524 centimeters, and is intended for topical use only with a prescription requirement. Each unit of issue is a container holding 100 applicators, which must be stored in the original closed package at room temperature in a dark, dry location, away from organic or oxidizable materials. The item is classified as a Type I (Code M) shelf-life item with a non-extendable shelf life of 24 months. It is regulated by the FDA, and buyers must submit a referral in EBS to confirm product details including bidder and manufacturer information. Hazardous materials regulations apply, requiring a current MSDS to be submitted via DLA.MSDS@DLA.MIL and included with each shipment, with packaging compliant to SPE2DP-26-T-4469 and applicable 49 CFR and ICAO standards. Removal of government identification from non-accepted supplies is required, and covered defense information potentially applies. The NSN is 6505-00-299-9672, with a single contract order quantity and a 10-day delivery requirement after award. The solicitation, issued under SPE2DP-26-T-4469, was posted on August 4, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain Pharm FSA, with Nicholas Quigley listed as the primary point of contact.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
FLUCONAZOLE TABLETS
Solicitation # SPE2DP-26-T-4489
Fluconazole Tablets 150 mg are procured in individually sealed blister strips containing 12 tablets each, with the unit of issue defined as a package. The product must have a non-extendable shelf life of 24 months, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with commercial standards and be designed to protect the contents from damage or breakage, with exterior shipping containers suitable for safe transport at the lowest possible rate to the delivery point. All markings must adhere to Medical Marking Standard No. 1, which replaces MIL-STD-129, and mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the product, except for specified functional uses in batteries, instruments, or reagents under defined conditions. The item is identified by NSN 6505013953039 and NDC codes NDC51407-0426-12 and NDC62559-0992-12, and must be manufactured by Golden State Medical Supply, Inc. or ANIP Acquisition Co. The contract requires delivery within 20 days FOB destination, with zero variance allowed in quantity, and inspection and acceptance occurring at the destination. The solicitation is issued under SPE2DP-26-T-4489, with a response deadline of August 10, 2026, and performance is directed to Fort Campbell, with the Department of Defense as the contracting agency.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
HYDROGEN PEROXIDE TOPI
Solicitation # SPE2DP-26-T-4481
Hydrogen Peroxide Topical Solution USP RP001 is a 3% stabilized solution intended for external topical use only, not for ingestion or application to the eyes or large body areas, and must not be used for more than one week. Each unit of issue is a 473-milliliter bottle, requiring tight closure, storage at controlled room temperature, protection from freezing and excessive heat, and must not be shaken. Labeling and packaging must strictly comply with Medical Marking Standard No. 1A dated February 4, 2013, superseding MIL-STD-129, and all packaging must be commercially sealed and designed to prevent damage during transport. The item is regulated by the FDA and classified as a TYPE I (CODE M) item with a non-extendable shelf life of 24 months. As a hazardous material under OSHA’s revised Hazard Communication Standard effective June 1, 2015, suppliers must provide Safety Data Sheets (SDS) and compliant HCS labels per 29 C.F.R. 1910.1200, and must train employees on these requirements. The contract mandates delivery within 20 days to FPO AP 96693, FOB destination, with zero variance in quantity, and prohibits parcel post in favor of traceable shipping methods. The NSN is 6505-00-153-8480, with a contracted quantity of two bottles, procured under solicitation SPE2DP-26-T-4481, and all technical and quality requirements are governed by the DLA Master List, which supersedes ASTM D3951. Approved manufacturers include Medline Industries, LP, Cardinal Health 200, LLC, and McKesson Medical-Surgical Government, with the item identified by multiple NDC and part numbers. All deliveries must be palletized per RP001 requirements and marked per Medical Marking Standard No. 1.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA

Same awarding agency

NAICS: 424210
New
DIBBS
ALBUTEROL INHALATIO
Solicitation # SPE2DP-26-T-4470
Albuterol Inhalation Aerosol is a prescription-only medication supplied as a pressurized aluminum canister containing 60 actuations, each delivering 108 micrograms of albuterol sulfate, equivalent to 90 micrograms of albuterol base, through a plastic actuator with a strap cap and built-in counter. The canister has a net weight of 8 grams and must be stored at 20° to 25°C (68° to 77°F), with allowable excursions between 15° and 30°C, following USP controlled room temperature guidelines. The inhaler must be kept with the mouthpiece down, shaken well before each use, and brought to room temperature prior to administration to ensure optimal performance. The product has a non-extendable shelf life of 18 months, and at the time of receipt by the first government activity, a minimum of 15 months of shelf life must remain. It is labeled and marked in compliance with SPE2DP-26-T-4470 and Medical Marking Standard No. 1C, and is classified as a hazardous material with flammable characteristics due to its pressurized contents. The canister must not be punctured, exposed to temperatures above 120°F, or disposed of in fire or incinerators. A current Material Safety Data Sheet (MSDS) is required and must accompany each shipment, submitted electronically to DLA.MSDS@DLA.MIL along with a completed cover sheet. Packaging must conform to 49 CFR and ICAO regulations for hazardous materials. The NSN is 6505-01-649-7928, with a quantity of 15 units ordered under Purchase Request 7017715897, with delivery required within 20 days of award. The solicitation is governed by DLA technical and quality requirements referenced in the DLA Master List, and buyers must confirm regulatory compliance through an EBS referral to the product specialist, providing manufacturer and bidder details. The item is regulated by the FDA and falls under Defense Information potentially subject to additional reporting.
Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 424210
New
DIBBS
LIDOCAINE AND PRILOCAI
Solicitation # SPE2DP-26-T-4475
Lidocaine and prilocaine periodontal gel, marketed as ORAQIX at a 2.5%/2.5% concentration, is a microemulsion dental anesthetic supplied in individual blister-packed cartridges, each containing 1.7 grams of gel, with 20 cartridges per carton. Each cartridge comes with a single-use sterile blunt-tipped applicator and must be stored at controlled room temperature between 20°C and 25°C. The product is regulated by the FDA and classified as a prescription-only device with a non-extendable shelf life of 36 months, requiring labeling in compliance with MMS No. 1. Packaging must conform to DLA specifications, including MIL-STD-129 marking, and all technical and quality requirements from the DLA Master List take precedence over commercial standards. The item is identified by NSN 6505-01-656-9640 and manufacturer part number NDC66312-0110-20 from Dentsply Sirona Inc. The contract, issued under solicitation SPE2DP-26-T-4475, requires delivery of three packages to Seymour Johnson Air Force Base in North Carolina within 20 days of order placement, with FOB destination terms and zero tolerance for quantity variance. Shipping must be conducted via traceable means, explicitly prohibiting parcel post. The delivery is scheduled for August 5, 2026, and the contract includes federal acquisition compliance requirements, including referral protocols for FDA-regulated items through EBS and adherence to covered defense information protocols. The purchasing request number is 7017708438, and all packaging and unit of issue must align with DLA’s authorized standards, with point of contact Lawrence Garnett available for coordination.
Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details