Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Carbon Steel Sheet (Cold Finish, Annealed) Supplier

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of twelve carbon steel sheets, specifically COMP 1020 or COMP 1025, which must be cold finished, annealed, and cut to dimensions of 0.063 by 36 by 96 inches. The materials must strictly adhere to SAE AMS5046F and SAE AMS2807C specifications, as well as ASTM A700. Suppliers are required to maintain a QSDL listing and ensure all packaging and labeling comply with MIL-STD-129 and MIL-STD-2073-1E. The contract is managed by the Department of Defense for delivery to the DLA Distribution Depot Oklahoma located at Tinker AFB. All shipments must include a Certificate of Quality Compliance to verify that the materials meet the stated technical requirements. Interested parties should note the response deadline of October 26, 2026, for this procurement under NAICS code 423430.

General Info

DoD subcontract for twelve carbon steel sheets delivered to Tinker AFB by October 2026.

Agency

Department Of Defense → DEPOT OKLAHOMA

NAICS

423430 - Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E4-27-T-0074.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHEET, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DEPOT OKLAHOMA

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DEPOT OKLAHOMA

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies carbon steel sheets for primes delivering DLA supply contracts. Provides 12 sheets of COMP 1020 or COMP 1025 carbon steel, cold finish and annealed, cut to 0.063" x 36" x 96" per SAE AMS5046F and SAE AMS2807C. Requires QSDL listing and adherence to MIL-STD-129, MIL-STD-2073-1E, and ASTM A700. Delivers material with Certificate of Quality Compliance to DLA Distribution Depot Oklahoma.

Similar Contracts

Same NAICS industry code

Commercial Security Gate Parts SupplierThis subcontract, managed by the Department of Defense under agency W6QK Acc-Apg, establishes a supplier for standard commercial replacement parts and materials to support prime contractors at the U.S. Army Aberdeen Test Center. The primary objective is to ensure rapid response repair capabilities by providing OEM or equivalent hardware for specific systems, including HySecurity, LiftMaster, AMAG, and HID. All supplied materials must be standard commercial items as defined by the Statement of Objectives. Performance for this contract takes place at Aberdeen Proving Ground, zip code 21005, under NAICS code 423430. The solicitation was posted on October 15, 2026, with a response deadline of November 2, 2026. The selected supplier will be responsible for the timely delivery of specified hardware and replacement components necessary for facility project maintenance.

POSTED

about 8 hours ago

DEADLINE

Precision Workstation and Monitor SupplierThis subcontract involves the supply of high-performance computing hardware to support prime contractors working on projects for the Naval Surface Warfare Center under the Department of Defense. The procurement includes three DELL Precision 5860XL Towers equipped with Windows 11 Pro, 64GB of RAM, and 1TB SSDs, along with one DELL P2418HT 24 inch touch screen monitor and USB 2.0 RS-232 serial adapters. The hardware is designated for delivery to Norco, California. This opportunity falls under NAICS code 423430 and was posted on October 15, 2026, with a response deadline of October 27, 2026.

Naval Surface Warfare Center

POSTED

about 8 hours ago

DEADLINE

OEM Parts Supplier for Date-Time Stamp MachinesThis subcontract opportunity is for an OEM parts supplier to provide genuine manufacturer replacement parts and consumables for date-time stamp machines used by prime contractors on California Department of State Hospitals projects. The scope of work specifically covers components for Rapidprint, Simplex, Acroprint, Lathem, and Amano machines, with a strict requirement that the supplier maintains authorized distributor status to ensure all items meet manufacturer specifications. The contract falls under NAICS code 423430 and involves the delivery of shipped replacement parts and consumables. Interested parties must submit their responses by the deadline of October 29, 2026, for this California state agency requirement.

California Department of State Hospitals

POSTED

about 21 hours ago

DEADLINE

IT Hardware SupplierThis subcontract opportunity with the Rockdale County Board of Commissioners in Georgia seeks an IT hardware supplier to support prime contractors on various government projects. The selected provider will be responsible for the procurement and delivery of a wide range of equipment, including workstations, field tablets, handhelds, scanners, cameras, monitors, and printers. All supplied hardware must be compatible with iOS, Android, and Windows ERP mobile capabilities to ensure seamless integration with county operations. The solicitation was posted on October 14, 2026, with a response deadline of November 19, 2026. Falling under NAICS code 423430, the contract focuses on the complete lifecycle of hardware acquisition and delivery to the county. Interested parties can find further details through the Georgia Department of Administrative Services portal.

Rockdale County Board of Commissioners

POSTED

about 23 hours ago

DEADLINE

in about 1 month

VR Training Headsets and Haptic Accessories SupplierThis subcontract involves the supply of virtual reality hardware for prime contractors working on projects for the City of Salt Lake City Police Department. The selected supplier is responsible for delivering 12 VR training headsets along with a suite of haptic peripherals, specifically including simulated long guns, handguns, and Taser/CEW accessories. The provided hardware must be fully compatible with the designated VR software and capable of supporting realistic behavioral, environmental, audio, and visual cues to ensure effective training. The scope of work concludes with the shipment and delivery of the complete hardware inventory.

POSTED

DEADLINE

Healthcare Display and Patient Control Equipment SupplyThis subcontract for Healthcare Display and Patient Control Equipment Supply involves the procurement and delivery of specialized healthcare-grade audiovisual hardware for prime contractors working on University of Michigan healthcare facility projects. The scope of work includes the supply of LG Patient and Public TVs, LG Digital Signage, and Curbell pillow speakers, along with the provision of LG 24/7 Quick Swap White Glove 5-Year Total Term Service Plans. To be eligible, the provider must maintain authorized LG partner status to ensure the delivery of both the hardware and the registered five-year service contracts. The solicitation was posted on October 14, 2026, with a response deadline of November 4, 2026, falling under NAICS code 423430.

University of Michigan

POSTED

DEADLINE

Computer Peripheral and Component SupplierThis subcontract agreement establishes a partnership for the supply of computer parts and peripheral devices to support prime contractors working on Gwinnett County Government projects in Georgia. The scope of work involves the sourcing and delivery of a wide range of internal and external hardware, including SSDs, HDDs, DDR5 Server RAM, Network Interface Cards, modems, cables, and scanners. These components may be provided under existing state contracts or as above-cost items, with delivery required at designated County locations. The opportunity is categorized under NAICS code 423430 and is managed through the Georgia state procurement system. Interested parties should note the critical timeline, with the posting date set for October 14, 2026, and a response deadline of October 29, 2026. This contract ensures that essential technological infrastructure and components are readily available to maintain the operational efficiency of county-led initiatives.

Gwinnett County Government

POSTED

DEADLINE

HP Server Hardware Provider (Rack, Stand-alone, and Blade)This subcontract opportunity is for an HP Server Hardware Provider to supply HP ProLiant series servers, including rack-mountable, stand-alone, and blade configurations, for prime contractors working on Gwinnett County Government projects. The selected provider must deliver fully configured hardware tailored to specific order requirements to ensure compatibility with Microsoft Windows Server versions ranging from 2018 to 2025. Eligible candidates must hold Authorized HP Reseller status and possess at least five years of experience in government or enterprise sales. The solicitation was posted on October 14, 2026, with a response deadline of October 29, 2026. This procurement falls under NAICS code 423430 and is managed through the state of Georgia for the Gwinnett County Government.

Gwinnett County Government

POSTED

DEADLINE

BL146-26 Purchase of File Servers and Peripheral Equipment on an Annual Contract on an Annual Contra

Solicitation # BL146-26

Gwinnett County Government is soliciting competitive sealed bids under solicitation BL146-26 for an annual contract to provide HP servers and computer-related peripheral equipment for the Department of Information Technology Services. The scope requires authorized HP resellers to supply the full product line of HP servers, including rack-mountable and stand-alone units, and various peripherals such as hard drives, memory, and network cards. The contract is scheduled to begin January 1, 2027, with an initial term and four optional 12-month renewal periods. Hardware must be shipped fully configured, and software is explicitly excluded from the contract. Award will be granted to the lowest responsive and responsible vendor, with evaluation factors including price, quality, conformity to specifications, and delivery terms. Pricing for servers must be submitted as a percentage off state contract pricing, while other peripheral equipment not available under state contract is priced as a percentage above cost, not to exceed 8%. Bidders must provide a bid schedule, references, a code of ethics affidavit, and a non-collusion certification. Submittals must be delivered in a sealed package to the Gwinnett County Purchasing Division by October 29, 2026, as electronic submissions are prohibited. The contract includes strict compliance requirements, including adherence to the Occupational Safety and Health Act of 1970, the Gwinnett County Code of Ethics, and the Americans with Disabilities Act. Successful vendors must maintain a valid Gwinnett County occupation tax certificate if they have a local office. Bonding requirements include a 5% bid bond, and 100% performance and payment bonds. Insurance providers must be authorized in Georgia and hold an A.M. Best rating of A-10 or higher. Payment will be processed via electronic payments, with certain service payments rendered within sixty days of a request.

Gwinnett County Government

POSTED

DEADLINE

Multi-Function Device (MFD) and Printer Hardware SupplyThis subcontract agreement focuses on the supply of monochrome and color multi-function devices and printers for prime contractors working on DeSoto County School District projects. The required hardware includes monochrome printers capable of 35+ and 40+ ppm, wireless monochrome printers capable of 19+ and 40+ ppm, and various MFDs. All devices must be equipped with an internal NIC, LCD graphic displays, and a minimum of 256 MB RAM. The scope of work includes the provision of minimum 6K toner cartridges and the delivery of new, pre-configured print hardware directly to district or prime contractor sites. Managed under NAICS code 423430 and associated with MPTAP in Mississippi, the contract ensures that essential printing infrastructure is delivered and ready for immediate use.

POSTED

DEADLINE

Supply of HP Battery Chargers (NSN 6130-01-695-2153)This subcontract involves the procurement and delivery of 19 HP battery chargers, part number L00895-003, to support prime contractors on Department of Defense supply contracts. The hardware must be delivered FOB Origin to the DLA Distribution New Cumberland Facility in Pennsylvania. All units are required to undergo inspection and must adhere to strict packaging and marking standards, specifically ASTM D3951 for packaging, MIL-STD-129 for marking, and RP001 for palletization. The contract mandates strict regulatory compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012. Operating under NAICS code 423430, the agreement specifies a response deadline of October 26, 2026. The primary objective is to ensure the seamless supply of these specific battery chargers to the designated military distribution facility while meeting all federal acquisition and quality control requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supplier of Digital Computers (NSN 7021016506316)This subcontract involves the supply of two digital computers for prime contractors working on Department of Defense projects under DLA Troop Support Construction and Equipment. The hardware must strictly adhere to NSN 7021016506316 and the DLA Master List of Technical and Quality Requirements. To ensure regulatory compliance, all provided components must be mercury-free and meet the standards set by the Buy American Act and the Berry Amendment. The equipment is to be delivered to DLA Distribution DDSP in New Cumberland, Pennsylvania. This procurement falls under NAICS code 423430, with a response deadline established for October 26, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

CASE, LIFE RAFT

Solicitation # SPE8E5-27-Q-0019

POSTED

about 3 hours ago

DEADLINE

BATTERY, NONRECHARGEABL

Solicitation # SPE7L7-27-T-0277

Solicitation SPE7L7-27-T-0277 is for the procurement of 3,759 nonrechargeable Lithium/Manganese Dioxide, Sealed 3.1 Volt batteries, identified by NSN 6135-01-340-7883. The contract requires strict adherence to controlling reference specification 12255 6092PS079 and associated drawings for all material and dimensional requirements. Key quality mandates include First Article Testing (FAT) and Production Lot Testing (PLT). For the FAT, the contractor must deliver 100 units within 90 calendar days to the Naval Surface Weapons Center, Crane Division. The government has allocated $45,000.00 for testing costs, which will be factored into the evaluation of offers. The items are classified as critical application items with a non-extendable shelf life of 60 months. Delivery is FOB Destination to the DLA Distribution Depot Oklahoma at Tinker AFB. Compliance with various military standards is mandatory, including MIL-STD-129 for marking, MIL-STD-130N for identification, and MIL-STD-2073-1E for packaging. Because the batteries are hazardous materials, the contractor must provide MSDS/PSDS per FED-STD-313 and ensure labeling conforms to the Hazard Communication Standard and IP025. Inspection and acceptance will occur at the point of origin. The solicitation is open to full and open competition, with specific price evaluation preferences available for certified HUBZone small business concerns.

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

Manufacture and Supply of Solid Rubber SheetsThis subcontract involves the manufacture and supply of 192 solid rubber sheets under NSN 9320-01-354-4428 for prime contractors supporting Department of Defense supply contracts. The work is managed by Depot Oklahoma and will be performed at Tinker AFB. All materials must be produced according to Basic CID A-A-59588B Rev B and must be certified as both asbestos-free and mercury-free. Strict compliance is required for marking and packaging, with items marked every three feet per MIL-STD-190 and MIL-STD-130N and packaged in accordance with ASTM D3951 and RP001. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026, falling under NAICS code 326299.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Electric Soldering Iron Heating Unit SupplierThis subcontract involves the supply of 46 electric soldering iron heating units for prime contractors supporting Department of Defense contracts via Depot Oklahoma. The supplier is responsible for manufacturing or sourcing units that strictly adhere to NSN 3439015678016 specifications, with a specific prohibition against the intentional addition of mercury. All deliverables must be packaged and marked in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards, with delivery terms set as FOB Origin. The agreement requires full compliance with DLA quality requirements and DFARS regulations regarding the safeguarding of covered defense information. Performance is centered at Tinker AFB, and the contract falls under NAICS code 332216. Interested parties must meet the response deadline of October 26, 2026.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

Aluminum Alloy 6061 T-6 Bar SupplyThis subcontract involves the supply of 178 feet of round, cold-finished aluminum alloy 6061 T-6 metal bars to support prime contractors for Department of Defense DLA supply contracts. The required materials must be 1.625 inches in diameter and provided in lengths of 10 to 12 feet. All bars must strictly adhere to SAE AMS4117M, ASTM B660, and ASTM B666/B666M-20 standards, and the supplier must provide Mill-Material Certification and maintain a QSLD listing. Logistical requirements specify that packaging must comply with MIL-STD-2073-1E and MIL-STD-129. The materials are to be delivered FOB Origin to Tinker AFB in Oklahoma. This procurement falls under NAICS code 332112 and is managed by Depot Oklahoma.

Nonferrous Forging

POSTED

DEADLINE

Aircraft Cockpit Light Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 97 aircraft cockpit light units, specifically NSN 6220-01-6516453, for prime contractors under Department of Defense DLA supply contracts. The contractor is responsible for producing or sourcing part number 721-1237-1028 in strict accordance with Hoffman Engineering specifications. Performance will take place at Tinker AFB, falling under NAICS code 334516. The agreement mandates rigorous adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements and Covered Defense Information protocols. All deliverables must be marked according to MIL-STD-129 and packaged following RP001 and ASTM D3951 guidelines to ensure compliance with agency regulations.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Carbon Steel Sheet Supplier (NSN 9515008463355)This subcontract involves the supply of precision-cut carbon steel sheets for prime contractors supporting Department of Defense projects at the DLA Distribution Depot Oklahoma located at Tinker AFB. The requirement specifies six sheets of COMP 1020 or COMP 1025 carbon steel featuring a cold finish and annealing, with precise dimensions of 0.063 inches in thickness, 36 inches in width, and 96 inches in length. To be eligible, suppliers must maintain a QSDL listing for FSGs 95 and 96 and ensure full compliance with the Buy American Act. Deliverables must include waterproof marking and official Mill-Material Certification. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026, under NAICS code 331221.

Rolled Steel Shape Manufacturing

POSTED

DEADLINE

Carbide End Milling Cutter SupplierThis subcontract involves the supply of precision-manufactured carbide end milling cutters to prime contractors supporting DLA supply contracts for Depot Oklahoma. The required components are single end, multi-flute, right-hand cut ball end cutters featuring a 0.312 inch diameter and a 2.500 inch overall length. All deliverables must be shipped FOB Origin and strictly adhere to ASTM D3951 packaging standards and MIL-STD-129 marking requirements. The contract is managed under NAICS code 333515 for the Department of Defense, with the place of performance located at Tinker AFB. Interested parties must note the response deadline of October 26, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

Supply of Dehydrator Cartridges (NSN 4440-01-543-3575)This subcontract involves the manufacture or procurement of 49 dehydrator cartridges under NSN 4440-01-543-3575 to support prime contractors delivering DLA supply contracts. The items must be produced according to Lockheed Martin part number 79750560 and applicable Source Control Drawings. Strict adherence to ESD-safe handling and packaging is required in accordance with Special Marking Code 39 and MIL-STD-2073-1E. Eligible providers must be an approved source or hold OEM source approval from Lockheed Martin, specifically referencing CAGE code 08992. The performance of this contract is centered at Tinker AFB, with the Department of Defense Depot Oklahoma serving as the agency. The response deadline for this requirement is October 26, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Specialized Defense Packaging and Freight ServicesThis subcontract for Specialized Defense Packaging and Freight Services involves providing specialized military packaging and coordinating FOB Origin transportation for prime contractors fulfilling DLA supply contracts. The scope of work focuses on the packaging and labeling of electrical components in strict accordance with MIL-STD-129, ASTM D3951, and RP001 palletization standards, including the application of hazardous materials handling processes as required by FED-STD-313. All completed units are to be delivered to the DLA Distribution Depot Oklahoma. The project is managed by the Department of Defense under the agency name Depot Oklahoma, with the place of performance located at Tinker AFB, zip code 73145-8000. Classified under NAICS code 488510, the opportunity was posted on October 14, 2026, with a response deadline of October 26, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Manufacturing of Electric Light Control (NSN 6220016149440)This subcontract involves the manufacture and supply of two Electric Light Control units under NSN 6220016149440 for the Department of Defense, specifically supporting Depot Oklahoma at Tinker AFB. The selected provider must fabricate the units in strict accordance with engineering drawings and design control activity standards, ensuring all deliverables are packaged according to MIL-STD-129 and ASTM D3951 specifications. Due to the nature of the technical data, the contractor is required to maintain CMMC Level 2 certification and JCP certification for export-controlled data. Full compliance with ITAR and EAR regulations is mandatory. Interested parties must submit their responses by October 26, 2026, under NAICS code 335999.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Carbon Steel Sheet Supplier (NSN 9515008463355)This subcontract involves the supply of eight cold-finished, annealed carbon steel sheets for prime contractors supporting projects at the DLA Distribution Depot Oklahoma, located at Tinker AFB. The required materials must be composed of COMP 1020 or COMP 1025 with specific dimensions of 0.063 inches in thickness, 36 inches in width, and 96 inches in length. Compliance requires that all sheets be packaged and marked according to MIL-STD-129 and ASTM A700 standards. The supplier must provide Mill-Material Certification and maintain a QSDL listing for FSGs 95 and 96. The response deadline for this requirement is October 26, 2026.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS