Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CARTRIDGE, HYDRAULIC

Active
SPE4A7-26-T-771QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A7-26-T-771Q is a request for quotations issued by the DLA Aviation ASC for the procurement of two hydraulic cartridges, identified by NSN 1650-01-194-4314. This is a source-controlled item that must be manufactured and tested according to cited limited rights data, specifically referencing Lockheed Martin Corp part number 4H90510-103A Rev G or Pneudraulics Inc part number 3964. The delivery requirement is 169 days after the award, with a need ship date of March 17, 2027, and a final required delivery date of May 12, 2027. The place of performance and delivery is Robins Air Force Base, Georgia, with both inspection and acceptance occurring at the point of origin. The contract mandates strict quality and technical compliance, requiring manufacturers to maintain inspection systems compliant with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan. Key administrative requirements include the use of the Wide Area WorkFlow system for invoicing, compliance with CMMC Level 2 self-assessment, and adherence to the Buy American Act and Berry Amendment. Packaging must comply with ASTM D3951 and MIL-STD-129. Offerors must submit their quotes via the DLA Internet Bid Board System by September 28, 2026, and any alternate offerors must provide a complete data package for evaluation.

General Info

DLA Aviation seeks two hydraulic cartridges for Robins AFB by May 12, 2027.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-771Q - Request for Quotations

PDF•19 pages•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUSA
Contacts
Shante'l Wyche
+1 (555) 000-0000

Full Description

Show more
CARTRIDGE,HYDRAULIC
CARTRIDGE HYDRAULIC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RT001: MEASURING AND TEST EQUIPMENT
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE
MANUFACTURED AND TESTED IN ACCORDANCE WITH THE
CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN
NOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO
HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE
ABILITY TO THE APPROVED SOURCES SHOULD QUOTE.
SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS
CONSIDERING SOURCE APPROVAL.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
LOCKHEED MARTIN CORP. CAGE 98897
P/N 4H90510-103A REV 'G'
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
SPE4A7-26-T-771Q
SECTION B
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
APPROVED SOURCE(S):SOURCE CONTROLLED
PNEUDRAULICS INC CAGE 06177
P/N 3964
IDENTIFY TO: SAMPLING:
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 1650-01-194-4314 Quantity: 2 EA Purchase Request: 7018413996QTY: 2 Delivery: 169 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
Federal
16--TURRET FLIR UNIT, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RNB10
This solicitation from Navsup Weapon Systems Support is for the repair and overhaul of 40 Turret FLIR Units (NSN 1680 016715197) to return them to a Ready For Issue condition. The contractor is responsible for providing all necessary labor, materials, and tooling, with a specific prohibition against using MIL-W-81381 wire in favor of SAE-AS22759 series wire. The initial induction period is 365 calendar days from the award date, with a government option to extend this for an additional year. The contractor must also provide option pricing for up to 80 total units over the life of the contract. Key operational requirements include strict adherence to ISO 9001/SAE AS9100 quality standards and ANSI/NCSL Z540.3 calibration systems. Specific protocols are established for items determined to be Beyond Economical Repair (BER), Missing on Induction (MOI), or requiring Over and Above Repair (OAR), all of which require written concurrence from DCMA and the Procuring Contracting Officer. The work is designated to be performed by FLIR Systems, Inc. in Wilsonville, Oregon, and includes a one-year warranty on supplies of a noncomplex nature.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
BIFILAR ASSY,AIRCRA
Solicitation # SPRPA126QRC54
This fixed-price solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of BIFILAR ASSY, AIRCRA under NAICS code 336413. The contract is being processed under Emergency Acquisition Flexibilities and requires the supplier to maintain ISO 9000 or equivalent quality standards. A critical requirement of this award is that all provided spares must be newly manufactured, as refurbished, remanufactured, or repaired materials are strictly prohibited. Eligibility for award is contingent upon Government source approval. Offerors who are not approved sources or distributors who cannot provide an authorized distributor letter on the manufacturer's letterhead will be deemed technically unacceptable. The contract includes a 12-month warranty for non-complex supplies and mandates the use of Wide Area Workflow for combined invoice and receiving reports. Compliance with the Buy American Act and various security prohibitions is required, and the solicitation is subject to priority ratings for national defense and emergency preparedness.
Pa DLA Aviation At Philadelphia

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
Federal
15--DOOR,AIRCRAFT
Solicitation # N0038326QTC97
This presolicitation notice from the Navsup Weapon Systems Support under the Department of Defense is for the procurement of five aircraft doors, identified by NSN 1R-1560-015532997-V2 and reference number 901-031-644-101. The delivery terms are set as FOB Origin, and the government prefers early or incremental deliveries. Contractual documents are considered issued upon being sent via mail, facsimile, or electronic methods. The government intends to solicit this requirement from a single source under FAR 6.302-1, though it is allowing other responsible sources to submit capability statements or proposals within 45 days of publication. The final decision to compete the contract remains at the government's discretion. This acquisition may be subject to the Buy American Act and various Free Trade Agreements, including the World Trade Organization Government Procurement Agreement.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--LINK ASSEMBLY FORWA
Solicitation # N0038326QNA72
This solicitation, issued by Navsup Weapon Systems Support under solicitation number N0038326QNA72, is for the repair of 40 units of National Stock Number 1680 014550571 as part of a Foreign Military Sales spare requirement. The contract includes an initial induction period of 365 calendar days from the date of award, with a government option to extend this period for an additional year. Contractors must provide pricing for the initial units and option pricing for a maximum of 80 units over the total contract duration. The agreement mandates a one-year warranty on supplies after the delivery date and requires compliance with Buy American and Free Trade Agreements. Payment will be processed via Wide Area Workflow, and the total contract value for threshold purposes will be determined by the highest proposed unit price multiplied by the maximum number of units. The response deadline for this requirement is October 23, 2026.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
61--DISTRIBUTING SYSTEM, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QNB41
This presolicitation under number N0038326QNB41 is for the procurement of two units of NSN 7R-6150-015554509-ZR, delivered FOB Origin. The requirement is managed by the Navsup Weapon Systems Support office in Philadelphia. Because the item is flight critical and the government lacks sufficient technical data to support full and open competition, the contract requires government source approval prior to award. Only previously approved sources have been solicited, though new sources may apply by submitting the required documentation detailed in the NAVSUP WSS Source Approval Information Brochures. Offers that fail to provide the necessary source approval data or proof of a pending request will not be considered for award. The government is not utilizing FAR Part 12 policies for commercial items, although interested parties may notify the contracting officer of their ability to provide a commercial alternative within 15 days of the notice. Technical specifications and standards can be obtained via the DODSSP or ASSIST-Online, and the response deadline for this opportunity is November 9, 2026.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
New
Federal
16--ACTUATOR,ELECTROMEC, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QQB39
This repair purchase order, issued by Navsup Weapon Systems Support, authorizes the repair and modification of Electromechanical Actuators (P/N 7RH 1680 014183151 V2) to return them to a Ready For Issue condition. The Boeing Company in Ridley Park, Pennsylvania, is designated as the repair source. The contractor is responsible for providing all necessary labor, materials, and test equipment, ensuring that all work adheres to current engineering drawings and industry standards. A one-year warranty is provided for supplies of a noncomplex nature, with a 45-day window for reporting defects. Key operational requirements include a 100% repair rate for all carcasses, with specific protocols for items determined to be Beyond Economical Repair (BER) or Missing on Induction (MOI), both of which require DCMA and PCO approval. The contractor must maintain a quality management system compliant with ISO 9001 or SAE AS9100 and adhere to strict configuration management and marking standards. Additionally, the use of MIL-W-81381 wire is prohibited, requiring the use of SAE-AS22759 series wire instead. All repairs must be documented through detailed historical record files and are subject to Government quality assurance testing.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
AERIAL REFUEL CONTR
Solicitation # N0038326QAA99
This contract is a solicitation from the Navsup Weapon Systems Support for the repair and overhaul of specific aviation components, specifically the Aerial Refuel Control and Flap/Slat Electronic units. The contractor, BAE Systems Controls Inc., is responsible for providing all necessary labor, materials, and tooling to return these assets to a Ready For Issue condition. Key performance metrics include a strict Repair Turnaround Time (RTAT) measured from the physical receipt of the asset, with an induction expiration date set for 365 days after the contract award. The agreement outlines detailed procedures for handling assets that are Beyond Economical Repair (BER), Missing on Induction (MOI), or requiring Over and Above Repair (OAR), all of which require written concurrence from DCMA and the Procuring Contracting Officer. The contractor must maintain a quality management system compliant with ISO 9001/SAE AS9100 and adhere to MIL-STD-130 for markings and MIL-STD-2073 for packaging. All work is to be performed at the BAE Systems facility in Fort Wayne, Indiana, with a warranty period of 365 days after delivery.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--JUNCTION BOX,AIRCRA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QNA96
This solicitation is for the repair, overhaul, and testing of three aircraft junction boxes (NSN 1680 014949173) to return them to a Ready For Issue condition. The initial induction period is 365 calendar days from the award date, with a government option to extend this for an additional year. The contractor must provide option pricing for up to 10 units over the total contract period and is responsible for providing all necessary tooling, fixtures, and materials, as the government will not provide manufacturing aids. Key technical requirements include the prohibition of MIL-W-81381 wire in favor of SAE-AS22759 series wire and compliance with IPC/EIAJ-STD-001C if MIL-STD-454 is referenced. The contract establishes specific protocols for items deemed Beyond Economical Repair, Missing on Induction, or requiring Over and Above Repair, all of which require written concurrence from DCMA and the Procuring Contracting Officer. The contractor must maintain a quality system conforming to ISO 9001/SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1 standards.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--FRAME,SEAT,AIRCRAFT, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RBB25
This solicitation, issued by the Navsup Weapon Systems Support under the Department of Defense, is for the repair and modification of five aircraft seat frames identified by NSN 7R-1680-016986032-H5. The contract will be awarded based on the lowest price technically acceptable quote. The delivery terms are FOB Origin, and the initial induction period for the units is 365 calendar days from the award date, with a government option to extend this period for an additional year. Offerors must provide pricing for the initial five units and option pricing for up to 30 units over the total contract duration. If pricing fluctuates after the first year, separate pricing for the second year is required. Quotes must be submitted electronically to the designated point of contact by the deadline of November 9, 2026. The total contract value for threshold purposes will be determined by multiplying the highest proposed unit price by the maximum quantity of 30 units.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
New
DIBBS
Manufacture and Supply of Fuselage FirewallsThis subcontract with the Department of Defense ASC Commodities Division involves the manufacture and supply of 33,000 fuselage firewalls under NSN 1560-00-905-4446. The contractor is responsible for fabricating the components to meet specific NSN standards and ensuring all commercial packaging adheres to ASTM D3951. Additionally, any hazardous material packaging must comply with FED-STD-313 and TQ REQUIREMENT IP025. The agreement requires formal certification for the Buy American and Balance of Payments Program. Classified under NAICS code 336413, the contract focuses on delivering the full quantity of completed firewalls to prime contractors supporting aircraft component projects. The solicitation was posted on September 22, 2026, with a response deadline of October 2, 2026.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
Supplier of Remote Control Levers (NSN 1680010796379)This subcontract involves the supply of six remote control levers, identified by NSN 1680010796379, for prime contractors fulfilling DLA supply contracts. The supplier is responsible for manufacturing or procuring parts that match Sikorsky Aircraft Corporation part number 70400-02620-041. All items must be packaged according to ASTM D3951 and the DLA Master List of Technical and Quality Requirements, while strictly adhering to aviation safety standards for Critical Application Items. The contract is managed by the Department of Defense under the ASC Commodities Division, with performance taking place in New Cumberland, Pennsylvania. The opportunity falls under NAICS code 336413, and the response deadline for this requirement is September 30, 2026.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Supply of Structural Aircraft Plates (NSN 1560-01-733-8598)This subcontract with the Department of Defense involves the supply of four structural aircraft plates meeting the technical specifications for NSN 1560-01-733-8598. The provider is responsible for manufacturing or sourcing these plates using aerospace-grade materials and precision machining to support prime contractors on DLA supply contracts. A critical requirement of the agreement is the maintenance and delivery of a comprehensive supply chain traceability documentation package in accordance with requirement RQ018. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 336413.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
Manufacturing of Attitude Indicator Caging ShaftsThis subcontract involves the manufacture and supply of three precision-machined attitude indicator caging shafts for the Department of Defense, specifically the ASC Supplier Oper AE and AF Division. The shafts must be fabricated according to NSN 6610-00-530-3543 specifications using CNC machining to meet strict aerospace tolerances. Performance will take place at Hill AFB, and the contractor is required to provide Source Approval Request documentation per RC001. Compliance with DLA Master List RA001 and RP001 packaging requirements is mandatory for all deliveries. The contract falls under NAICS code 336413 and requires the delivery of completed, fully documented components. The response deadline for this solicitation is September 30, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334516
New
DIBBS
Supply of Pressure Transmitters (NSN 6685123750988)This subcontract, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, involves the supply of seven pressure transmitters identified by part number X00E50200509 and NSN 6685123750988. These components, produced by Rolls-Royce Solutions America Inc and MTU Friedrichshafen GmbH, are designated as Critical Application Items. The contract requires strict adherence to MIL-STD-129 for marking and RP001 for palletization. The opportunity is a Total Small Business Set-Aside under NAICS code 334516, with performance located in San Diego, California. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026.
Analytical Laboratory Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
Supplier of Nonmetallic Electrical Conduit Assembly (NSN 5975-01-422-5743)This subcontract involves the manufacture or sourcing of one Nonmetallic Electrical Conduit Assembly, identified by NSN 5975-01-422-5743, for prime contractors supporting DLA Aviation supply contracts. The selected supplier is responsible for the production and delivery of the unit, ensuring all marking, labeling, and palletization strictly adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. The opportunity is issued by the Department of Defense under the ASC Supplier OE and AF Division, with the place of performance located at Robins AFB. Interested parties must respond by September 30, 2026, for this requirement categorized under NAICS code 335999.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
Aircraft Exhaust Duct ManufacturingThis subcontract involves the fabrication and delivery of one Aircraft Gas Turbine Engine Exhaust Duct for prime contractors supporting Department of Defense DLA supply contracts. The manufacturing process must adhere to NSN 2840-01-455-3677 and the DLA Master List of Technical and Quality Requirements, utilizing aerospace-grade heat-resistant alloys and precision metal forming and welding equipment. All materials must comply with FAR 52.211-5 requirements. The project is managed under NAICS code 336412 by the ASC Supplier OE and AF Division. Performance of the contract will take place in Tracy, California. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339999
New
DIBBS
Kit Assembly and Specialized PackagingThis subcontract for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the kitting, assembly, and military-grade packaging of Fastener Tool Kits for prime contractors. The scope of work includes organizing fasteners into specific kit configurations, packaging according to ASTM D3951, palletizing per RP001, and ensuring all marking and labeling adhere to MIL-STD-129 standards using industrial equipment. The project is categorized under NAICS code 339999 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026. The final deliverable consists of fully assembled, marked, and palletized kits ready for deployment.
All Other Miscellaneous Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
Fastener Component SupplyThis subcontract for Fastener Component Supply supports prime contractors on ASC Supplier Oper AE and AF Div projects within the Department of Defense. The scope involves the manufacture and delivery of bulk quantities of individual fasteners, bolts, nuts, and specialized hardware, produced via precision machining, forging, or casting to meet specific military or commercial standards. All components must adhere to quality control requirements as defined by MIL-STD-1916. The project is categorized under NAICS code 332216 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 30, 2026, following the posting date of September 22, 2026.
Saw Blade and Handtool Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Supplier of Nonmetallic Flexible Conduit (NSN 5975016170683)This subcontract involves the supply of three units of nonmetallic flexible conduit, specifically part number BC261-24-100 or approved equivalents meeting NSN 5975016170683 specifications. The contract is managed by the ASC Supplier Oper AE and AF Div under the Department of Defense, with a response deadline of September 30, 2026. The supplier must adhere to strict military standards for packaging, marking, and quality control, specifically MIL-STD-2073-1E, RP001, MIL-STD-129, and MIL-STD-1916 or MIL-STD-105/AQZ1.4. Delivery is required FOB Origin to the DLA Distribution DDSP in New Cumberland, Pennsylvania.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Manufacture and Supply of Special Shaped SpacersThis subcontract involves the manufacture and supply of 16 special shaped spacers under NSN 5365-01-658-9678 for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The fabrication must adhere to TDP Rev A Gen 1 and Drawing NR 19207 12580893, utilizing precision machining equipment. Quality control and delivery requirements include sampling per MIL-STD-1916 or ASQ H1331, marking according to RQ017, and packaging in compliance with ASTM D3951 and MIL-STD-129. The contractor must ensure full compliance with DFARS 252.225-7001 and deliver the finished units to Tracy, California. This opportunity falls under NAICS code 332710 and was posted on September 22, 2026, with a response deadline of September 30, 2026.
Machine Shops

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Manufacturing of Structural Aircraft Panels (NSN 1560-01-152-1476)This subcontract involves the manufacturing of structural aircraft panels under NSN 1560-01-152-1476 for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The contractor is responsible for fabricating nine finished panels in accordance with TDP Rev A Gen 3 and Reference Drawing 81205 25-2779, Rev F, with performance taking place at Tinker AFB. The project requires the completion of a Government First Article Test per FAR 52.209-4 and the delivery of all associated FAT documentation. Strict cybersecurity and compliance standards are mandated, including CMMC Level 2 certification via C3PAO, as well as adherence to DFARS 252.204-7012 and NIST SP 800-171.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
Supplier of Electrical Insulation Sheets (NSN 5970-01-697-0387)This subcontract involves the supply of electrical insulation sheets, specifically NSN 5970-01-697-0387 and Essex Brownell Inc. part number NX-410-005, to prime contractors supporting DLA Aviation supply contracts. The work is performed for the Department of Defense under the ASC Supplier OE and AF Division, with the place of performance located at Hill AFB. All deliverables must be completed by March 2027. The supplier must adhere to strict quality and safety standards, including sampling per MIL-STD-1916 or ASO H1331 and marking according to RQ017. Hazardous materials must be accompanied by MSDS and hazard labels in compliance with 29 CFR 1910.1200. Additionally, the contract explicitly prohibits the use of additive manufacturing processes for these components.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332813
New
DIBBS
Specialized Coating and PlatingThis subcontract with the Department of Defense, specifically for ASC Supplier Oper AE and AF Div, involves the application of protective coatings and surface treatments to ground rods. The work requires the use of chemical treatment facilities and plating tanks to deliver finished, coated products. A critical requirement of the performance is strict adherence to DFARS 252.223-7008, which prohibits the use of Hexavalent Chromium. The project is categorized under NAICS code 332813 and will be performed in Cherry Point. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS