Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CARTRIDGE, RESPIRATO

Active
SPE8E6-26-T-3961Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of respiratory cartridges, part number 7000051851 manufactured by 3M Company, with the NSN 4240-01-342-2857, under solicitation SPE8E6-26-T-3961. Each package contains 60 cartridges, and the item is classified as a Type I respirator cartridge with a non-extendable shelf life of 60 months, requiring compliance with NIOSH approval TC-23C-1062. The product must be free of intentionally added mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lamps, and controlled instruments, with additional containment requirements for portable mercury-containing devices per NAVSEA 5100-003D. The contract enforces strict packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129P, with special labeling for shelf life and the prohibition of plastic wrap, cushioning, or dunnage materials whenever possible. Palletization must adhere to DLA Packaging Requirements, and hazardous material shipping protocols are applicable. Cybersecurity requirements mandate a CMMC Level 2 self-assessment. Delivery is FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Five separate delivery lines specify quantities ranging from one to ten packages, with required delivery dates between March and August 2026, and destinations spanning multiple U.S. military installations including Oahu, Offutt AFB, Yokota AB, and Tampa, with explicit instructions against using parcel post in favor of traceable transportation methods. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers.

General Info

Procure 60-cartridge respirators, NSN 4240-01-342-2857, NIOSH-approved, no mercury, FOB destination, delivery 2026 to U.S. military bases.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

OPC 78 BOX 5120, APO, AP, 96328-5120, US

Set-Aside

NONE

Documents

(1)

SPE8E6-26-T-3961.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
John Lieb
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CARTRIDGE,RESPIRATO
CARTRIDGE, RESPIRATOR, AIR FILTERING
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
RD002, COVERED DEFENSE INFORMATION APPLIES
..
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
..
1 PG = 60 EA
..
..
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
..
..
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment .. U/I = PACKAGE CONTAINING 60 CARTRIDGES .. NIOSH APPROVAL TC-23C-1062 APPLIES
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
SPE8E6-26-T-3961
SECTION B
3M COMPANY 76381 P/N 7000051851
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017707940 0001 PG 1.000
NSN/MATERIAL:4240013422857
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1 AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
FB5209
FB5209 374 LRS LGRDDC
OPC 78 BOX 5120
APO AP 96328-5120
SPE8E6-26-T-3961
SECTION B
PR: 7017707940 PRLI: 0001 CONT’D
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
FB5209
FB5209 374 LRS LGRDDC
CP 011 81 42 552 2510 EXT 58805
BLDG 950 MCGUIRE ST
YOKOTA AB 197 0001
JP
M/F: (TCN) FB520962120021
RDD:
PROJ: TP 3
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A01 DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:08/05/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7016061149 0001 PG 3.000
NSN/MATERIAL:4240013422857
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE8E6-26-T-3961
SECTION B
PR: 7016061149 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE
TERMS OF THE CONTRACT, AVOID THE USE OF
PLASTICS AS WRAPPING, CUSHIONING, OR
DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE
SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1
AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1 AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
FB4600
FB4600 55 LRS LGRDDC
BLDG 1400 CP 402-294-5151
101 COMSAT DRIVE DOORS 1-2
OFFUTT AFB NE 68113-4014
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4600
FB4600 55 LRS LGRDDC
P/U DOOR 4-5BLDG 1400 CP 4022945151
101 COMSAT DRIVE
OFFUTT AFB NE 68113-4014
US
M/F: (TCN) FB460060830149
RDD: 777
PROJ: TP 2
SUPP ADD: YBZ503 SIG: A
SPE8E6-26-T-3961
SECTION B
PR: 7016061149 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:03/27/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7016063685 0001 PG 10.000
NSN/MATERIAL:4240013422857
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1 AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPE8E6-26-T-3961
SECTION B
PR: 7016063685 PRLI: 0001 CONT’D
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1 AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1 AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
N32253
PEARL HARBOR NAVAL SHIPYARD IMF
667 SAFEGUARD ST SUITE 100
PEARL HARBOR HI 96860-5033
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
N32253
PEARL HARBOR NAVAL SHIPYARD IMF
667 SAFEGUARD STREET
BLDG 167-1 RECV 808-473-8000X4961
PEARL HARBOR HI 96860-5033
US
M/F: (TCN) N3225360835468
RDD: 090
SPE8E6-26-T-3961
SECTION B
PR: 7016063685 PRLI: 0001 CONT’D
PROJ: 606 TP 1
SUPP ADD: Y SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A01 DIST: 9B ADV: 2G FC: F3
Need Ship Date:00/00/0000 Original Required Delivery Date:03/27/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 7017712811 0001 PG 5.000
NSN/MATERIAL:4240013422857
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE
SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1
AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
SPE8E6-26-T-3961
SECTION B
PR: 7017712811 PRLI: 0001 CONT’D
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1 AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1 AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1 AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
SPE8E6-26-T-3961
SECTION B
PR: 7017712811 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
FB4814
FB4814 6 LRS LGRDDC
8307 CYPRESS STAND DR CP 8288131800
BLDG/FLOOR BLD RM/SUITE P49
TAMPA FL 33621-5552
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4814
FB4814 6 LRS LGRDDC
CP (813) 828-8874
8307 CYPRESS STAND DR SUITE P49
TAMPA FL 33621
US
M/F: (TCN) FB481462120049
RDD: 243
PROJ: TP 2
SUPP ADD: YBZ527 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:08/05/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0005 7017722352 0001 PG 3.000
NSN/MATERIAL:4240013422857
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPE8E6-26-T-3961
SECTION B
PR: 7017722352 PRLI: 0001 CONT’D
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1 AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1 AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1 AND FIGURE 28.
SPE8E6-26-T-3961
SECTION B
PR: 7017722352 PRLI: 0001 CONT’D
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1 AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS.
IN ADDITION TO ALL MIL-STD-129P MARKINGS INCLUDE SHELF LIFE MARKINGS IAW MIL-STD-129P PARAGRAPH 5.2.1 AND FIGURE 28.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
N21866
USNS ABLE T-AGOS 20
UNIT 100419 BOX 1
FPO AP 96660
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE8E6-26-T-3961
SECTION B
PR: 7017722352 PRLI: 0001 CONT’D
N21866
USNS ABLE TAGOS 20
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N218666214S637
RDD: 777
PROJ: HJ5 TP 3
SUPP ADD: YNENG SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A41 DIST: 9B ADV: FC: F4
Need Ship Date:00/00/0000 Original Required Delivery Date:08/06/2026

SPE8E6-26-T-3961 NSN/Part Number: 4240-01-342-2857 Quantity: 1 PG Purchase Request: 7016063685QTY: 10 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
SPACER ASSEMBLY, TAIL R
Solicitation # SPE8EF-26-Q-0157
The contract pertains to the procurement of 109 units of a spacer assembly for a tail rotor blade with NSN 1730-01-082-6504, issued under solicitation SPE8EF-26-Q-0157 by the Department of Defense through the Defense Logistics Agency. Delivery is required within 60 days of award, and responses must be submitted by August 13, 2026. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program certification, completion of DOD export-controlled data training, and prior authorization from DLA may access the restricted technical data. The contract also requires the seller to be certified by a CMMC Level 2 C3PAO to meet cybersecurity standards. All inquiries should be directed to Russell Keiser at russell.keiser@dla.mil.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
HARNESS, AIRCRAFT SAFET
Solicitation # SPE4A7-26-Q-0957
The contract specifies the procurement of a single aircraft safety shoulder harness with NSN 1680-00-555-2938 under purchase request 7017272193 for a quantity of 273 units, with delivery required within 497 days after award. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Packaging must meet DLA-specific requirements, and all items must undergo inspection and acceptance at the point of origin. Non-accepted supplies must have all government identification removed, and each item must be physically marked in accordance with bare item marking standards. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Department of Commerce. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled technical data, and formal DLA authorization may access such data. The solicitation number is SPE4A7-26-Q-0957, issued on August 3, 2026, with responses due by August 22, 2026, managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Grayson Andrews as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 19 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL COM
Solicitation # SPE4A7-26-T-606Z
The contract pertains to the procurement of two support structural components for aircraft, identified by NSN 1560-00-795-8779, under solicitation SPE4A7-26-T-606Z, with a delivery deadline of 151 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The supplier must comply with DLA packaging standards, source approval documentation, and inspection and acceptance procedures conducted at the point of origin. Export control restrictions apply due to the presence of technical data subject to ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons, whether within the U.S. or abroad, and restricting access to contractors with approved JCP certification, completed DLA training, and formal authorization. Configuration changes require formal Engineering Change Proposal requests for any deviations or waivers. The item does not require Unique Identification per the Service customer’s request, though physical marking and removal of government identification from non-accepted supplies are mandated. Cybersecurity requirements include CMMC Level 2 certification for third-party assessors, and covered defense information is subject to applicable DFARS provisions. Delivery is designated to Tinker AFB, Oklahoma, with primary point of contact provided for procurement inquiries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SHAFT ASSEMBLY, MATC
Solicitation # SPE4A6-26-T-11LK
The contract pertains to the procurement of a single SHAFT ASSEMBLY, MATC with NSN 1650-01-047-1220, requiring delivery within 20 days of award. It is governed by a suite of stringent technical and quality protocols, including tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and mandates adherence to DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sampled lots unless the contract states otherwise, and MIL-STD-105/ASQ Z1.4 may be used only for determining sample size, not acceptance criteria. All supplies must be free of government identification if not accepted, and the contract incorporates covered defense information requirements. The solicitation, issued under SPE4A6-26-T-11LK, targets NAICS code 336413 and is managed by the Department of Defense’s ASC Commodities Division, with inquiries directed to Jennifer Jacobs.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
MULTIPLEXER SUBASSE
Solicitation # SPE4A5-26-T-319Z
The contract pertains to the procurement of five units of a Multiplexer Subassembly, identified by part number 16E4004-809 and NSN 5895-01-426-4389, under solicitation SPE4A5-26-T-319Z. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Configuration control and engineering change management are enforced through RQ002 and RQ011, while physical identification of items must comply with RQ017. Packaging must adhere to MIL-STD-2073-1E and DLA’s RP001, with marking per MIL-STD-129 and no special markings required. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item has no shelf life restriction. Delivery is due in 411 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The contract requires strict adherence to quantity limits with no variance allowed. The prime contractor is Lockheed Martin Corporation, with other entities also listed as associated providers. The solicitation was posted on August 3, 2026, with responses due by August 11, 2026, under NAICS code 336413 for aerospace product and parts manufacturing.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SHIELD, AIRCRAFT GRO
Solicitation # SPE8EF-26-Q-0158
The contract pertains to the procurement of 18 aircraft ground shields under NSN 1730-00-073-5654, with a delivery requirement of 60 days after award. It is issued under solicitation SPE8EF-26-Q-0158 as a total small business set-aside, with responses due by August 12, 2026. The solicitation incorporates technical and quality requirements from the DLA Master List, with compliance governed by the revision in effect on the solicitation issue date. Cybersecurity requirements mandate CMMC Level 2 certification through a certified third-party assessment organization. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons regardless of location. Access to this controlled data is limited to contractors with approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal approval from DLA. Strict marking and identification protocols apply, including removal of government identification from non-accepted supplies and bare item marking. Packaging must meet DLA specifications, and all performance occurs within the United States under the Department of Defense. Point of contact for inquiries is Russell Keiser, reachable via the provided email and phone number.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
COVER, FUEL TANK
Solicitation # SPE4A5-26-T-319T
The contract pertains to the procurement of one fuel tank cover with part number 16B5504-809 and NSN 1560010522791 under solicitation SPE4A5-26-T-319T, issued by the Department of Defense through the ASC Supplier Oper OEM Division. Delivery is required within 20 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the point of origin. Packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, with marking conforming to MIL-STD-129 and no special marking required. The contract incorporates DLA packaging requirements and mandates adherence to the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with sampling procedures governed by MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance unless otherwise specified. Attributes are assigned verification levels or AQLs based on criticality, and manufacturers may choose attribute or variable inspection under MIL-STD-1916. The supplier must also meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements. The item is procured as a single unit with no bidset available, and the contract enforces the removal of government identification from non-accepted supplies and requires physical identification of bare items.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
RETAINER, SPRING
Solicitation # SPE4A1-26-T-2511
The contract pertains to the procurement of four retainer springs with NSN 1650-01-046-2272 under solicitation SPE4A1-26-T-2511, with a delivery requirement of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Sampling is to follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless directed otherwise. No data is currently available, and the alternate offeror must submit a complete data package including details for both the approved and alternate part. The solicitation is issued by the Department of Defense’s Aviation Supply Chain, with Allison Hugel as the primary point of contact, and responses are due by August 11, 2026.
AVIATION SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SPIDER UNIT, ACTUATO
Solicitation # SPE4A7-26-T-607N
The contract pertains to the procurement of three Spider Unit Actuators under NSN 1650-00-740-1512, with a delivery requirement of 20 days after award. The solicitation number is SPE4A7-26-T-607N, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with Huy Nguyen listed as the primary point of contact. The offeror must comply with CMMC Level 2 Cybersecurity Self-Assessment requirements and provide complete data packages for both the approved part and any alternate part, with particular attention to physical identification and bare item marking standards. The response deadline is August 11, 2026, with the solicitation posted on August 3, 2026, and the NAICS code 336413 indicates the industrial classification covers aerospace product and parts manufacturing. The delivery place of performance and office address details are unspecified, but the contracting activity is based in the United States.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SHAFT ASSEMBLY, OUTP
Solicitation # SPE4A1-26-Q-0099
The contract specifies the procurement of 662 units of a Shaft Assembly, Output, identified by NSN 2925-01-179-2648 and manufacturer part number 3501614-3 from Honeywell International Inc. The item is classified as a Commercial Item and a Critical Safety Item (CSI) with a critical application, requiring strict adherence to specified dimensional tolerances on the output shaft’s forward end design and torsion rod diameter. Quality assurance is governed by SAE AS9100 for both manufacturers and non-manufacturers, with inspection and acceptance occurring at origin in accordance with MIL-STD-1916 or ASQ H1331, using zero-defect acceptance criteria unless otherwise stated. All items must be marked per MIL-STD-129 with lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, and packaged in compliance with MIL-STD-2073-1E and DLA packaging requirements. The contract mandates compliance with DLA’s master list of technical and quality requirements, Cybersecurity Maturity Model Certification Level 2 self-assessment, and documentation for source approval, while explicitly stating that Item Unique Identification is not required per DFARS 252.211-7003. The procurement is under a Firm Fixed Price contract with no variance allowed in quantity, and delivery is due 247 days after the date of award. The delivery point is Origin, and the shipping destination is DLA Distribution Cherry Point, North Carolina. The item has no shelf life requirement and is subject to all applicable defense information and cybersecurity controls. The solicitation number is SPE4A1-26-Q-0099, posted on August 3, 2026, with responses due by August 10, 2026, issued by the Department of Defense’s Aviation Supply Chain under a federal acquisition framework. All waivers or deviations must be approved by the DSC Contracting Officer, and measuring and test equipment must meet specified standards. The unit of issue is each (EA), with pricing details to be filled in at award.
AVIATION SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
ELEMENT 30
Solicitation # SPE4A7-26-T-606U
This contract pertains to the procurement of two units of a commercial off-the-shelf (COTS) item identified by part number 600-00151 and NSN 1680-01-675-4175, supplied by SPECTRO SCIENTIFIC, INC. Delivery is required within 20 days of contract award, with FOB origin terms and zero tolerance for quantity variance. The item has a non-extendable shelf life of 15 months (Type I, Code J), and all packaging must comply with MIL-STD-2073-1E and DLA-specific packaging requirements, including marking per MIL-STD-129 with special code 32 indicating shelf-life status. Hazardous communication standards require approved Safety Data Sheets and OSHA-compliant labels, which must be reviewed by technical personnel and submitted to the DLA Aviation HMIRS office prior to award. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and attributes must be verified at specified levels. Mercury or mercury compounds are strictly prohibited in preservation or packaging. The item must be shipped via traceable freight methods only, to the receiving officer at Naval Air Station Fallon, Nevada. The contract references technical and quality requirements from the DLA Master List and prohibits parcel post. The required delivery date is July 28, 2026, with the solicitation issued under SPE4A7-26-T-606U, and responses due by August 11, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PARTS KIT, HYDRAULIC
Solicitation # SPE7M4-26-Q-0899
This contract is for a Parts Kit, Hydraulic Pump with NSN 4320-00-928-5138 and a quantity of 215 units, supplied by Eaton Aerospace, LLC under part number 914353. It is classified as a restricted source item requiring government engineering source approval and mandates compliance with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management via Engineering Change Proposal and Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. All supplies must adhere to MIL-STD-2073-1E for preservation and packaging, with marking conforming to MIL-STD-129 and palletization governed by DLA packaging standards. The item is designated as a critical application and must meet sampling standards per MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified, and all attributes are assigned strict verification levels or AQLs. Delivery is due within 400 days after award, with FOB origin, inspection and acceptance at destination, and a strict zero percent variance in quantity allowed. Packaging and shipping instructions direct delivery to the DLA Distribution Depot at Hill AFB, Utah, and transportation guidelines are governed by specific DLA procedural notes. The contract’s solicitation was issued on August 3, 2026, with a response deadline of August 10, 2026, and the material is needed for delivery by March 7, 2028.
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 423690
New
DIBBS
WAVEGUIDE
Solicitation # SPE7M5-26-Q-0824
The Defense Logistics Agency under the Department of Defense has issued a solicitation for a single unit of a waveguide identified by NSN 5985-01-558-4115 under purchase request 7017225749. The solicitation, numbered SPE7M5-26-Q-0824, was posted on August 3, 2026, with a response deadline of August 6, 2026, at 5:00 PM. This federal procurement is classified as a solicitation without a specific set-aside designation or NAICS code, indicating it is open to general federal contractor participation. The place of performance and point of contact information are not provided, and the contract is administered through the DLA’s DIBBS platform, with all details accessible via the provided UI link.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

in 3 days
View Details
NAICS: 423510
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-Q-0342
The contract specifies the procurement of aluminum alloy 6061 bar stock with a flat cross section, 0.500 inches thick and 1.250 inches wide, available in whole-foot lengths of 10, 11, or 12 feet, with an approximate weight of 0.735 pounds per foot. The material must conform to SAE AMS4117M Revision M, ASTM B666/B666M-20, and ASTM B660-23 standards, with a temper designation of T6, and requires a Certificate of Quality Compliance (mill material certification) to be included with each shipment. All units must be permanently marked with minimum required data including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stamping or stenciling; adhesive labels are required for bars under 0.250 inches nominal diameter. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation per ASTM B660 and marking as per MIL-STD-129R, including special code ZZ for preservation and packing. The item is subject to strict compliance with the Qualified Suppliers List for Distributors (QSLD) program; only distributors listed on the QSLD are eligible to supply this product, and any deviation or use of non-approved suppliers constitutes an unauthorized substitution that may result in criminal penalties. Government inspection and quality conformance requirements are waived for QSLD-compliant suppliers. The contract is firm fixed price with zero variance allowed in quantity, and delivery is required within 30 days after award. All shipments must be sent via traceable freight, not parcel post, to the designated DLA depot in Tobyhanna, Pennsylvania, with full compliance to all marking and documentation requirements.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-1939
The contract specifies the procurement of one metal plate identified by NSN 9535-01-477-4004 and part number 230-10269, with a unit of issue as a single piece. Delivery is required within five days of award, with goods to be shipped FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, specifically using packaging method 10, drying method 1, and preservative material 00. Marking follows MIL-STD-129 with no special marking code, and palletization adheres to DLA packaging requirements. The shipment is to be delivered via traceable means excluding parcel post to a military address at Fort Bliss, Texas, with detailed routing instructions including RDD and TCN identifiers. The contract references technical and quality standards from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information. The solicitation number is SPE8E4-26-T-1939, issued by the Defense Logistics Agency under NAICS code 331491, with a response deadline of August 14, 2026, and an original required delivery date of July 31, 2026.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331221
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-Q-0343
The contract pertains to the procurement of four metal bars with part number 9530-01-691-9562 under solicitation SPE8E4-26-Q-0343 issued by the Defense Logistics Agency. Delivery is required within 30 days of award, and responses must be submitted by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal approval may access the controlled data. Additionally, the contractor must be certified at Cybersecurity Maturity Model Certification Level 2 by an accredited third-party assessment organization. The point of contact is Leslie Morales-Zera, reachable via email or phone provided.
Rolled Steel Shape Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339994
New
DIBBS
CLOTH, CLEANING
Solicitation # SPE8E5-26-T-3752
The contract pertains to the procurement of cleaning cloths designated by part number 599306 and NSN 7920-01-614-3522, with a unit of issue of one box containing 100 items. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and acceptance occurs at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for Type II shelf-life items, and palletization must adhere to DLA packaging requirements. The item has a 12-month extendable shelf life per RS001, and all packaging and shipping must meet hazardous materials protocols. The delivery destination is AECOM HMMC Okinawa at Camp Kinser, FPO AP 96375, with parallel freight shipping instructions to the same location under JP address details. The contract is governed by DLA technical and quality specifications referenced in the DLA Master List, and the solicitation number SPE8E5-26-T-3752 is valid with a response deadline of August 14, 2026, and an original required delivery date of August 4, 2026. The procurement is under the NAICS code 339994 and managed by the Defense Logistics Agency.
Broom, Brush, and Mop Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-T-4547
This contract is for the procurement of six battery storage units identified by NSN 6140-01-701-5915 and part number A66-11336-002, supplied by Daimler Truck North America LLC under solicitation SPE7L7-26-T-4547. The items are classified as a Type I (Code H) critical application item with a non-extendable shelf life of 12 months, requiring strict adherence to packaging, marking, and shipping standards specified in MIL-STD-2073-1E and MIL-STD-129, including special labeling for shelf life code 32. All packaging must comply with DLA’s procurement requirements and hazardous materials handling protocols, and the units must be shipped via traceable freight methods—not parcel post—to the designated delivery point at USCG AIRSTA Barber’s Point in Kapolei, Hawaii, with delivery due within 20 days of contract award. The units must not contain intentionally added mercury except where functionally necessary in batteries or approved instruments, and any mercury-containing components must be shockproof with secondary containment per NAVSEA 5100-003D. Sampling and quality verification must follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. The contract includes provisions for hazardous communication, removal of government identification from non-accepted supplies, and covers defense information under RD003, with full technical and quality requirements referenced from the DLA Master List. The unit of issue is each, priced at $6.00 per unit for a total of $36.00, with no quantity variance allowed, inspection and acceptance occurring at destination, and the original required delivery date is July 24, 2026.
Battery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333415
New
DIBBS
COMPRESSOR UNIT, REF
Solicitation # SPE8E8-26-T-4941
The contract pertains to the procurement of one compressor unit, reference model, with NSN 4130-01-490-3757, under solicitation SPE8E8-26-T-4941 issued by the Defense Logistics Agency. Delivery is required within five days of award, FOB destination, with no variance permitted in quantity, and inspection and acceptance are to occur at the delivery point. Packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, container types, and marking in accordance with MIL-STD-129, with no special markings required. The unit must not contain mercury or mercury-containing compounds unless explicitly exempted for functional uses in batteries, lighting, sensors, weapon systems, or authorized chemical reagents, and any portable mercury-containing devices must be shockproof with secondary containment per NAVSEA 5100-003D. Transportation must follow DLAD Proc Note C19 and C20, using traceable methods only—parcel post is prohibited—and shipments are to be directed to USS ASHLAND LSD-48 at FPO AP 96660 under RDD 777, with VSM used by DLA vendors. The item falls under NAICS code 333415, with a required delivery date of July 31, 2026, and the solicitation response deadline is August 14, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, and source approval documentation must meet RC001 standards. All compliance and delivery instructions are binding and must be strictly adhered to by the vendor.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333415
New
DIBBS
FILTER ELEMENT, AIR
Solicitation # SPE8E8-26-T-4940
The contract pertains to the procurement of one air filter element with NSN 4130016962270 and part number 8005-3401-2333, supplied by TECH-ETCH, INC. Delivery is required within five days of award, with FOB origin terms and no tolerance for quantity variance, meaning exactly one unit must be delivered. Inspection and acceptance both occur at the destination point, and the item must be packaged in compliance with ASTM D3951, subject to overriding DLA Master List of Technical and Quality Requirements, while also adhering to MIL-STD-129 for marking and labeling. Packaging and palletization must follow DLA’s RP001 requirements, with the unit of issue specified as EA and quantity per unit pack as 001. Shipments must use the fastest traceable means and explicitly prohibit parcel post; the freight delivery address is Fleet Readiness Center Aviation Support Equipment in Solomons, Maryland. The required delivery date is July 31, 2026, with a contract solicitation number SPE8E8-26-T-4940 and a response deadline of August 14, 2026. All documentation, including source approval requests and removal of government identification from non-accepted supplies, must comply with referenced DLA directives, and the contracting office is under the Defense Logistics Agency with primary point of contact Alexis Selby.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339113
New
DIBBS
SEALING COMPOUND
Solicitation # SPE8ES-26-T-2486
The contract specifies the procurement of a black sealing compound, identified by NSN 8030-01-511-1245 and part number PR-2201 B1, with a unit of issue of 2.5 fl oz per kit and a total quantity of one kit. Delivery is required within ten days to Fort Rucker, Alabama, FOB destination, with no variance allowed in quantity. The item is classified as a Type 2 shelf life item with an initial shelf life of six months, extendable under specified conditions, and must be stored below 80 degrees Fahrenheit. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for Type II shelf life, and palletization must adhere to DLA packaging requirements. Hazardous material handling is governed by OSHA’s revised Hazard Communication Standard, requiring submission of approved Safety Data Sheets and compliant labels prior to award, along with employee training on the new classification and labeling system. The sealing compound must be shipped using the fastest traceable means, excluding parcel post, and is subject to inspection and acceptance at the delivery point. The solicitation is issued by the Defense Logistics Agency under contract number SPE8ES-26-T-2486, with a response deadline of August 10, 2026, and a required delivery date of August 4, 2026. The technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, applicable under the revision in effect on the solicitation issue date or award date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331221
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-Q-0344
The contract pertains to the procurement of four metal bars, identified by part number 7053887-1 and NSN 9530-01-691-7713, under solicitation SPE8E4-26-Q-0344 issued by the Defense Logistics Agency. Delivery is required within 30 days of award, with responses due by August 17, 2026, and the solicitation posted on August 3, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting disclosure of associated technical data to foreign persons, whether inside or outside the U.S., and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved U.S./Canada Joint Certification Program certification, completion of mandatory DOD export control training, and prior authorization from DLA. Additionally, the contractor must hold CMMC Level 2 certification through a certified third-party assessment organization and adhere to DLA packaging standards and procedures for removing government identification from non-accepted supplies. The primary point of contact is Leslie Morales-Zera, reachable via phone and email provided.
Rolled Steel Shape Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
DIBBS
FILTER ASSEMBLY, WAT
Solicitation # SPE8E8-26-T-4942
The contract pertains to the procurement of one FILTER ASSEMBLY, WAT with NSN 4610-01-414-2298 under solicitation SPE8E8-26-T-4942, issued by the Defense Logistics Agency. Delivery is required within 20 days to FPO AP 96672 with FOB destination terms, and inspection and acceptance occur at the delivery point. The item must comply with MIL-STD-2073-1E packaging standards, including specific packaging methods, containment codes, and marking per MIL-STD-129 without special identifiers. Palletization must meet DLA packaging requirements, and shipping must use traceable freight methods, explicitly prohibiting parcel post. The contract enforces strict zero-defect sampling protocols per MIL-STD-1916 or equivalent zero-based plans, where critical, major, and minor attributes are verified at levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance requires zero non-conformances unless explicitly modified by the contract, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. The contract incorporates cybersecurity requirements mandating CMMC Level 2 self-assessment compliance and applies Covered Defense Information protocols. It prohibits the intentional introduction of mercury or mercury-containing compounds into the product or its contact surfaces, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific naval reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. The unit of issue is EA, with no quantity variance permitted, and delivery is tied to project ZH9 TP 2 with a required delivery date of August 4, 2026. All supplies must be furnished in strict alignment with DLA documentation, and vendor communications must follow designated points of contact and shipping instructions.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIAL
Solicitation # SPE8E7-26-T-3452
The contract is for the procurement of two tubeaxial fans identified by NSN 4140-01-685-6531 and part number 44-12-DD3 from HARTZELL FAN, INC. The item must be delivered within five days of award, with delivery terms set at FOB origin and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which take precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA’s RP001 packaging requirements. The goods must be shipped by the fastest traceable method, excluding parcel post, to the designated delivery point at Fort Eustis, Virginia. The contracted quantity is two units at a total price of $2.00 per unit. The contract number is SPE8E7-26-T-3452, with a required delivery date of August 8, 2025, and all provisions are governed by the DLA’s current master list of technical and quality standards in effect on the solicitation issue date. Marking and documentation must include the government-provided mailing and shipping identifiers, and government-use-only codes are embedded for internal tracking.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details