Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CASE, ELECTRONIC COM

Active
SPE4A7-26-T-607MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of one electronic case, part number BSMU-B-CASE-TAN-018, identified by NSN 5895-01-701-4810, under solicitation SPE4A7-26-T-607M. The item is classified as a critical application item and must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards. Packaging must adhere to ASTM D3951 with mandatory compliance to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements for Procurement (RP001). Sampling and inspection follow MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Delivery is FOB origin with a required delivery date of June 2, 2027, and a 294-day lead time, with no tolerance for quantity variance. Inspection and acceptance occur at destination, and the item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, as designated in the contract. Documentation for source approval is required, and all government identification must be removed from non-accepted supplies. The contract includes specific unit of issue and packaging data, and all transport logistics are governed by DLA PROC NOTES C19 and C20.

General Info

Procurement of one critical electronic case with strict quality, packaging, and delivery compliance to DLA standards by June 2, 2027.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-607M.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
TAMERA GREENE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CASE,ELECTRONIC COM
CASE,ELECTRONIC COM
.
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
CRITICAL APPLICATION ITEM
BLUESKY MAST, LLC 3JWX5 P/N BSMU-B-CASE-TAN-018
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017696132 0001 EA 1.000
NSN/MATERIAL:5895017014810
DELIVERY (IN DAYS):0294
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE4A7-26-T-607M
SECTION B
PR: 7017696132 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:06/02/2027 Original Required Delivery Date:06/02/2027
SPE4A7-26-T-607M NSN/Part Number: 5895-01-701-4810 Quantity: 1 EA Purchase Request: 7017696132QTY: 1 Delivery: 294 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334290
New
DIBBS
TRANSMITTER, TEMPERA
Solicitation # SPE4A6-26-Q-1252
This contract pertains to the procurement of two transmitter units, part number 6685-01-732-6391, designated as a critical application item from PYROMATION LLC, with a firm fixed price and no tolerance for quantity variance. Delivery is required within 115 days after award, with both inspection and acceptance occurring at the supplier’s origin. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and containerization, with marking adhering to MIL-STD-129 and no special markings applied. The item must be palletized per DLA guidelines and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise specified. Documentation for source approval is governed by RC001, and government identification must be removed from non-accepted supplies per RQ011. The unit of issue complies with DoD standards, and transportation procedures follow DLAD procedural notes. The contract is linked to Purchase Request 7014171388 with a required ship date of October 15, 2025.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334290
New
DIBBS
DISPLAY UNIT
Solicitation # SPE4A7-26-T-607G
This contract outlines the procurement of a commercial off the shelf display unit identified by part number 998-4230-00 and NSN 5895-01-733-3331, with a total quantity of four units required. The item must be delivered FOB origin within 300 days of contract award, with no variance allowed in quantity and inspection and acceptance taking place at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and unit containerization, and all marking must follow MIL-STD-129 with no special markings required. Palletization is governed by DLA packaging requirements, and the delivery address is specified as the DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is each, with a unit price of $4.00 and a total contract value of $16.00. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling. The contract requires adherence to DLA procurement procedures for transportation and freight, and the solicitation was issued under contract number SPE4A7-26-T-607G with a response deadline of August 11, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
Federal
ADCOM Technologies Radio Hub
Solicitation # 20158431
Customs and Border Protection is pursuing a sole source award to ADCOM Technologies for a proprietary Radio Hub System designed to integrate with existing communication repeaters to support mission-critical operations. This procurement is justified under the Revolutionary FAR Overhaul 13.101, which permits a single source when no other supplies or services meet agency requirements. The procurement falls under NAICS code 334290 for Other Communications Equipment Manufacturing and is set aside entirely for small businesses, with a size standard of 800 employees. Although no formal solicitation is being issued, interested parties may submit company capability information to the contracting officer by 12:00 p.m. E.T. on August 5, 2026, via email only to david.torres@cbp.dhs.gov. The contract will be awarded and performed at Fort Bliss, Texas, with the awarding office located in Washington, D.C., under the Department of Homeland Security’s Border Enforcement Contracting Division. All inquiries must be submitted electronically; phone calls are not accepted.
Border Enforcement Contracting Division

POSTED

about 12 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334290
New
Federal
ANTENNA SUBASSEMBLY
Solicitation # SPRMM126QGE91
This contract pertains to the procurement of an ANTENNA SUBASSEMBLY under emergency acquisition flexibilities provided by FAR Part 18, with performance governed by strict quality, inspection, and documentation standards. The item must be manufactured to meet the designated CAGE code 91417 and reference number 3238924-101, with all physical identification complying with MIL-STD-130 Revision N. The contractor is responsible for all inspection activities unless otherwise directed, and must maintain complete records for 365 days after final delivery. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer and must be classified using one of six standardized change codes, with substitutions only allowed after formal review and documentation. Packaging must adhere to MIL-STD-2073, and the government reserves the right to conduct inspections at source or upon delivery. The solicitation mandates electronic submission of invoices and receiving reports via WAWF and requires vendors to be authorized distributors of the original manufacturer, with proof of authorization submitted with their offer. Award will be based on the Lowest Price Technically Acceptable methodology, with offers valid for a minimum of 90 days. Contractors must register for the PIEE EDA portal to access order information and comply with mandatory use of Workflow Pro for payment processing. The contract incorporates several government-wide clauses including mandatory small business representations, security prohibitions, veteran equity requirements, and compliance with National Defense priority ratings. Technical data is not provided, and all applicable military specifications must be obtained independently through official DOD sources. Notifications for contract modifications should be received via NAVSUP WSS, and any changes to production facilities require a $250 administrative cost reduction and written approval, with strict constraints on delivery timing, location, and f.o.b. point.
SPRMM1 DLA Mechanicsburg

POSTED

about 12 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334290
New
Federal
COMMUNICATIONS CONT
Solicitation # N0010426QTB90
This contract concerns the repair of COMMUNICATIONS CONT equipment under solicitation N0010426QTB90, with a required Repair Turnaround Time (RTAT) of 170 days measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. The contract mandates strict adherence to technical standards including MIL-STD-130 for marking, compliance with manufacturer specifications, and performance under a firm-fixed-price structure. All repairs must be conducted in accordance with approved technical documentation and government-approved procedures, with no substitutions permitted without prior written approval from the NAVICP-MECH Contracting Officer. The government requires independent inspection and final acceptance of all repaired items, with records maintained for at least 365 days post-final delivery. Freight is FOB Origin, and the Navy manages all logistics via the CAV system. Failure to meet the RTAT triggers a per-unit, per-month price reduction, with a defined maximum cap, and may lead to termination for default, though excusable delays such as government-caused postponements are exempted. The contract includes several mandatory clauses covering cybersecurity maturity certification, Buy American compliance, small business subcontracting requirements, and the mandatory use of Workflow Pro’s Assist Module for invoicing and receiving. The award will be bilateral, requiring the contractor’s written acceptance before execution, and the government reserves the right to exercise an option for increased quantities within 365 days. Only authorized distributors of the original manufacturer may submit offers, and proof of authorization must accompany proposals. All technical documents provided by the Navy include distribution statements that dictate access and dissemination limits, and contractors must comply with security prohibitions and export control regulations. The contracting officer is Alison E. Harper, and all correspondence, quotes, and submissions must reference the specified RMA details, CAGE codes, unit pricing, and RTAT, with final delivery expected to meet the Government’s standard of quality and timeliness.
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in 28 days
View Details
NAICS: 334290
New
Federal
PANEL,GROUND DETECT
Solicitation # N0010426QJC02
The contract pertains to the repair of seven units of the PANEL,GROUND DETECT (NSN 7HH 5895 015780922, P/N 104110-100) under a firm fixed-price arrangement, with all costs including receipt, teardown, evaluation, repair of unwholesome or damaged conditions, missing parts, and CAV reporting to be fully absorbed by the contractor. The work must comply with MIL-STD packaging, MIL-STD-130 marking, and cybersecurity requirements including DFARS 252.204-7008 and 252.204-7012, and must include IUID labeling unless the new unit price is below $5,000. The contractor is required to submit a detailed quote within 15 days, containing repair and new unit pricing, teardown and evaluation fees, RTAT, throughput constraints, induction expiration date, and a cost breakdown with profit rate. Pricing is contingent on meeting stated RTATs; failure to meet these will trigger a reconciliation modification and per-unit price reduction, without waiving the government’s right to terminate for default. The repair must adhere to the manufacturer’s technical standards and be performed in accordance with approved drawings and directives, with no substitutions permitted without written approval. All transportation to and from the repair site is government-funded. The contract mandates compliance with Buy American provisions, cybersecurity maturity certification, and small business subcontracting requirements, and requires the contractor to be an authorized distributor of the original manufacturer, with proof provided in writing. Records of all inspections conducted by the contractor must be maintained for 365 days after final delivery and made available to the government upon request. The performance location and inspection point are to be specified by the contractor, and all deliveries must be FOB source. The government retains full inspection rights and may conduct acceptance testing independently. The contract includes limitations on liability, payment via electronic funds transfer, prohibition of unauthorized subcontracting, and adherence to the Navy’s mandatory Workflow Pro assist module. The award will require bilateral acceptance, and the quote must remain valid for 180 days. The solicitation number is N0010426QJC02, with response due by August 17, 2026, and the contracting office is located in Mechanicsburg, PA, under the Department of Defense and NAVSUP Weapon Systems Support.
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334290
New
Federal
Handsets and Mobile Base System
Solicitation # W911YP26QA007
The Utah Army National Guard, through the U.S. Property and Fiscal Office for Utah Purchasing and Contracting, is soliciting quotes for the procurement of Handsets and a Mobile Base System under a Total Small Business Set-Aside, with the NAICS code 334290 for Other Communications Equipment Manufacturing. The solicitation, numbered W911YP26QA007, was issued on July 22, 2026, and responses are due by 12:00 PM EST on August 28, 2026, submitted electronically to Kristinna A. Braun at kristinna.a.braun.civ@army.mil. The contract is structured as a Firm-Fixed Price (FFP) award using the Lowest Price Technically Acceptable (LPTA) evaluation method, meaning the contract will be awarded to the offeror submitting the lowest-priced proposal that meets all mandatory technical requirements without trade-offs. The deliverables include one Mobile Base Station with UHF/VHF radio capability, 15W output, encryption, and remote control, and three Handsets/Transceivers designed for use with the base system, all of which must be uniquely identified with a two-dimensional Data Matrix symbology per MIL-STD-130 and ISO/IEC 16022 standards. Each item must be marked with a Unique Item Identifier (UII) that includes enterprise and serial data, reported to the DoD UID Registry, and compliant with ISO/IEC 15434 syntax. Delivery is required to 7602 South Airport Road, West Jordan, UT, with all transportation costs and risks borne by the contractor until delivery, and inspection and acceptance will occur at the same location. The period of performance is 60 work days from the award date. Offerors must be small businesses and represent their status in the System for Award Management, with additional certifications required for socioeconomic categories such as SDB, WOSB, EDWOSB, SDVOSB, or HUBZone if applicable. All proposals must include a Unique Entity Identifier (UEI) and CAGE code, and must affirmatively disclose whether they provide covered defense telecommunications equipment or services under 252.204-7018. The contract incorporates numerous FAR and DFARS clauses regarding payment by electronic funds transfer, Buy American provisions, sustainable products, cybersecurity, supply chain risk, prohibitions on hex
W7N3 Uspfo Activity Ut Arng

POSTED

about 12 hours ago

DEADLINE

in 25 days
View Details
NAICS: 334290
New
Federal
Quick Hub Locker
Solicitation # W911S226U3911
The Quick Hub Locker contract specifies a two-part asset management locker system centered on an 11-door primary control unit that serves as the hub for all connected auxiliary units. This main unit must provide full access control, data recording, and synchronization capabilities for the entire system, with no separate interface required for operation. It includes onsite installation, setup, and initial user training along with a warranty. A secondary 19-door auxiliary unit is also required to expand capacity and must integrate natively with the main unit, drawing all management functions through its control system without any need for standalone operation. Both units must operate as a unified hardware ecosystem under a shared cloud architecture, ensuring real-time data flow and centralized oversight across all compartments. The system requires a mandatory three-year cloud service subscription to enable software functionality, system updates, and remote management, with no operational capability granted without this continuous license. All hardware components must synchronize seamlessly over this unified cloud platform to ensure consistent performance, access logging, and asset tracking. The contract is issued under solicitation W911S226U3911 as a Small Business Set Aside, with performance centered at Fort Drum, New York. Bids are due by August 10, 2026, and the point of contact is Kevon Williams of the Department of Defense. The NAICS code 334290 classifies this as an other electrical equipment and component manufacturing procurement.
W6QM Micc-Ft Drum

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
Connector Assembly Manufacturing or SupplyThe contract entails the manufacture or supply of 374 units of Connector Assembly identified by NSN 5935011652934, with strict compliance required to the MIL-DTL-38999N specification and all applicable defense quality standards. This subcontract is issued under the NAICS code 334290 and is managed by the Nuclear Reactor Program within the Department of Defense, with performance obligations centered at Robins Air Force Base, Georgia, zip code 31098-1887. The solicitation was posted on August 2, 2026, and responses must be submitted by August 13, 2026, with no set-aside designation applied, indicating open competition among qualified contractors. All deliverables must meet the exacting technical and quality benchmarks expected for defense-grade electrical interconnect components used in critical military and aerospace applications.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334290
New
DIBBS
INSTALLATION KIT, ELECT
Solicitation # SPE4A0-26-T-4019
The contract is for the procurement of four installation kits for electronic equipment, identified by NSN 5895-01-626-0556, with delivery required within five days after award to a military location in Poland. The solicitation is a total small business set-aside under NAICS code 334290, issued by the Department of Defense’s Aviation Supply Chain ESOC Buys office, with proposals due by August 5, 2026. All kits must be fully assembled, properly packaged in compliance with MIL-STD-2073-1E and DLA RP001, and marked according to MIL-STD-129 including barcoding and detailed contents lists. Packaging must use preservation method code 10 (Clng/Dry) with no preservation or wrap materials applied, and items must be shipped FOB origin. The contract includes stringent export control obligations under ITAR or EAR, limiting access to technical data to contractors approved by DLA, holding valid JCP certification, and having completed mandatory training. Cybersecurity requirements mandate CMMC Level 2 compliance through either a self-assessment or certified third-party assessment, and safeguarding of covered defense information is governed by DFARS 252.204-7012 and NIST SP 800-171 assessments. Hazardous materials must comply with OSHA HazCom standards and DFARS 252.223-7001, with prohibitions on hexavalent chromium and restricted storage or disposal of toxic substances without written approval. Radioactive materials require advance notification and specific labeling. All deliveries are subject to government inspection and acceptance at destination using zero-based sampling plans with stringent AQLs—0.1 for critical, 1.0 for major, and 4.0 for minor defects. Contractors must be registered in SAM, provide a UEI and CAGE code, and confirm small business status, with additional reporting required if offering covered telecommunications equipment or participating in a joint venture. Invoicing must be processed electronically through WAWF, and accelerated payments to small business subcontractors are mandated. No pricing details are disclosed in the solicitation, and contract type remains unspecified, but fixed-price terms are implied through referenced clauses.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in 1 day
View Details
NAICS: 334290
New
Federal
Domestic Manufacturing and Assembly CoordinationThe contract requires the final U.S.-based integration and assembly of a surgical light, HD camera, and remote control system to comply with domestic manufacturing standards, ensuring all components are assembled within the United States to meet federal sourcing and production requirements. The work is specifically centered on combining these critical medical devices into a fully functional, compliant system suitable for use in healthcare environments, with the final assembly to be conducted at the designated performance location in West Roxbury, Massachusetts, 02132. This subcontract opportunity is issued by the Department of Veterans Affairs through the 241-NETWORK Contract Office 01, with a response deadline of August 15, 2026, at 8:30 PM Eastern Time. The NAICS code 334290 categorizes the effort under other electronic equipment manufacturing, indicating the technical nature of the assembly process and the need for expertise in medical-grade electronics integration. While no set-aside designation is specified, the requirement clearly prioritizes domestic production, making it essential for bidders to demonstrate capable facilities, workforce, and supply chain alignment within the United States to successfully fulfill the contract obligations.
241-NETWORK Contract Office 01 (36C241)

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 334290
New
Federal
Remote Control System DevelopmentThe contract seeks the design and supply of a remote control system tailored for non-contact adjustment of surgical light settings, including focus, intensity, and positioning, to enhance precision and hygiene in operating room environments. The system must be engineered for seamless integration with existing surgical lighting infrastructure, ensuring reliability, responsiveness, and compatibility with sterile procedural requirements. Development must adhere to medical device standards and prioritize user ergonomics, electromagnetic compatibility, and fail-safe operation under high-stakes clinical conditions. The contract is classified as a subcontract under NAICS code 334290, targeting advanced medical equipment manufacturing, and is administered by the Department of Veterans Affairs through the 241-NETWORK Contract Office 01. Proposals are due by August 15, 2026, with performance expected to take place in West Roxbury, Massachusetts, at a ZIP code of 02132. While no set-aside provisions are specified, submission must align with federal procurement regulations governing medical technology suppliers, and bidders are expected to demonstrate technical feasibility, proven experience in clinical device development, and a clear path to scalable production.
241-NETWORK Contract Office 01 (36C241)

POSTED

3 days ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 561910
New
DIBBS
Packaging, Labeling, and Kitting Services for DLA DeliveriesThe contract solicits end-to-end packaging, preservation, labeling, and kitting services for aerospace components to be delivered FOB origin in strict compliance with Defense Logistics Agency standards. All work must adhere to DLA’s technical and procedural requirements to ensure components are properly protected, identified, and assembled for military use. The services are classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The NAICS code 561910 designates this as a support services activity within the waste management and remediation sector, though the nature of the work clearly aligns with specialized logistics and supply chain support for defense equipment. The solicitation was posted on August 3, 2026, with a firm response deadline of September 1, 2026, and is managed by the ASC Supplier Operations AE and AF Division under the Department of Defense. While the exact place of performance and agency office details are unspecified, delivery obligation is clearly defined at FOB origin, placing responsibility for logistics planning on the contractor. The contract is accessible through the DIBBS platform, and all prospective offerors are expected to comply with federal acquisition regulations and DLA-specific documentation standards. Participation is restricted to small businesses, making this an opportunity dedicated exclusively to qualified small business entities operating in the defense logistics space.
Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 339920
New
DIBBS
Manufacture of Aircraft Seat Cushion (Aircraft Interior Component)The contract mandates the manufacture of ergonomic and durable aircraft seat cushions designed for military use, adhering strictly to Department of Defense packaging and quality standards. The product must meet rigorous performance criteria to ensure soldier safety, comfort, and long-term reliability under extreme operational conditions. All items must be produced in compliance with Federal Acquisition Regulation guidelines and delivered in accordance with DoD-specific packaging protocols to maintain integrity during transport and storage. This is a small business set-aside subcontract under NAICS code 339920, reserved exclusively for small business concerns as defined by the Small Business Administration. The solicitation was posted on August 3, 2026, with a deadline for responses set for September 1, 2026. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while specific performance locations and points of contact are not detailed, the work is intended to support military aircraft interior systems. Interested vendors must submit proposals through the official DIBBS portal prior to the deadline to be considered.
Sporting and Athletic Goods Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 339920
New
DIBBS
Manufacture of Aircraft Seat Back Cushion (Critical Life Support Component)The contract seeks the manufacture of a critical life support component—an aircraft seat back cushion—designed to meet stringent aviation safety and durability standards for military aircraft. The product must be fire-resistant and engineered for long-term performance under extreme conditions, ensuring crew safety and compliance with military life support requirements. The solicitation is specifically set aside for small businesses under the SBA’s Total Small Business Set-Aside program, as defined by FAR 19.5, ensuring opportunities for qualified small enterprises to compete. The North American Industry Classification System code 339920 categorizes this as the manufacturing of other miscellaneous fabricated metal products, aligning with specialized components for aerospace applications. The proposal must be submitted by September 1, 2026, with the contract awarded under the Department of Defense, specifically by the ASC SUPPLIER OPER AE AND AF DIV. While the physical location of performance is not specified, the component is intended for use in military aircraft systems, requiring adherence to exacting technical and certification benchmarks. The contract is structured as a subcontract, indicating it may be part of a larger supply chain supporting broader defense aviation programs. Participation requires full capability to deliver certified, high-reliability components without compromise to safety, durability, or regulatory compliance, with the DLA’s DIBBS platform serving as the official portal for submission and related documentation.
Sporting and Athletic Goods Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 336412
New
DIBBS
Manufacture of Aircraft Fairing, Back (FAA PMA or Equivalent)The contract entails the manufacture and delivery of a structural or aerodynamic aircraft back fairing designed for life support systems, requiring strict compliance with military specifications and form-fit-function criteria to ensure seamless integration into existing platforms. The product must meet all technical and performance standards associated with aerospace applications under defense mandates, and the manufacturing process must be validated for consistent quality and reliability in operational environments. This is a small business set-aside subcontract categorized under NAICS code 336412, exclusively available to small businesses as defined by the Small Business Administration. The solicitation was posted on August 3, 2026, with responses required by September 1, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are unspecified, but the contract is accessible via the DIBBS portal for qualified bidders seeking to fulfill this defense-related procurement.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: NA
New
DIBBS
Unable to Retrieve Subcontract OpportunitiesThe contract opportunity titled "Unable to Retrieve Subcontract Opportunities" was posted on August 3, 2026, with a response deadline set for September 2, 2026. It is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete, as defined by the Small Business Administration and FAR 19.5. The solicitation number SPE4A726R0674 is associated with this opportunity, which is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. However, critical details including the NAICS code, place of performance, point of contact, and the prime contract context are unavailable due to a system timeout. The location, agency office address, and specific performance requirements cannot be determined from the provided data, and no further decomposition or subcontracting structure can be identified at this time. Interested parties are directed to the provided UI link for potential updates or additional information.

POSTED

about 7 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A7-26-T-607H
This contract is for the procurement of 12 plain studs with NSN 5307-01-457-2738 and part number 399-84-1022, supplied by Buffalo Pumps Inc and Air & Liquid Systems Corporation, both under DLA supplier code 83130. The items are classified as critical application components and must be delivered FOB origin within 173 days of the contract award, with no variance allowed in quantity. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, California, with inspection and acceptance occurring at the destination. Packaging and preservation must strictly follow MIL-STD-2073-1E, with specific methods for preservation, wrapping, and containment, and all marking must comply with MIL-STD-129 without special markings. Mercury or mercury-containing compounds are strictly prohibited in any part of the product, its packaging, preservation, or labeling, except for specific functional uses such as batteries, fluorescent lamps, sensors, and instruments defined by NAVSEA, which must include a secondary containment and be shockproof per NAVSEA 5100-003D. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. All documentation, unit of issue, and transportation details are governed by DLA procedures and referenced directives.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CAP, LENS
Solicitation # SPE4A7-26-T-606R
The contract pertains to the procurement of a single unit of a CAP, LENS with NSN 5855-01-666-9264 under solicitation SPE4A7-26-T-606R, requiring delivery within 10 days of award with FOB origin terms and no variance in quantity. All items must comply with DLA’s packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, including the specified packaging code U and absence of special marking. Sampling and inspection protocols mandate zero non-conformances per MIL-STD-1916 or ASQ H1331 unless otherwise stated, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively. Configuration change management and deviation requests are governed by RQ002 and RQ011, while government identification must be removed from non-accepted supplies. Delivery must be shipped via traceable freight to the designated distribution office at Camp Lejeune, NC, explicitly prohibiting parcel post. The item is required for military use, with a specified original delivery date of July 28, 2026, and all technical and quality requirements are governed by the DLA Master List referenced in RA001. The contract is subject to DoD unit of issue standards and requires compliance with all applicable engineering change procedures and quality assurance provisions.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
HARNESS, AIRCRAFT SAFET
Solicitation # SPE4A7-26-Q-0957
The contract specifies the procurement of a single aircraft safety shoulder harness with NSN 1680-00-555-2938 under purchase request 7017272193 for a quantity of 273 units, with delivery required within 497 days after award. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Packaging must meet DLA-specific requirements, and all items must undergo inspection and acceptance at the point of origin. Non-accepted supplies must have all government identification removed, and each item must be physically marked in accordance with bare item marking standards. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Department of Commerce. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled technical data, and formal DLA authorization may access such data. The solicitation number is SPE4A7-26-Q-0957, issued on August 3, 2026, with responses due by August 22, 2026, managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Grayson Andrews as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-606X
The contract is for one unit of a SPACER, SLEEVE with NSN 5365-01-701-2568, under solicitation SPE4A7-26-T-606X, with a delivery requirement of 20 days after award. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific mandates for physical identification and bare item marking. Compliance with MIL-STD-1916 or comparable zero-based sampling plans is required, with attributes classified as critical, major, or minor tied to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes default to major. The contractor must adhere to DLA packaging standards and remove government identification from non-accepted supplies. The product is associated with covered defense information and is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including domestic-based foreign nationals, and requiring strict compliance with DFARS 252.225-7048. Access to technical data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance located in Mechanicsburg, Pennsylvania, and inquiries directed to Renee Bynum.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A7-26-T-606Q
The contract is for electrical insulation tape, identified by NSN 5970-01-588-5080 and part number 3304920, with a quantity of four units, to be delivered within 20 days to Homestead Air Force Base, Florida. The item is classified as a critical application with a shelf life of 18 months, extendable, and must comply with Type II packaging requirements as specified under RS001. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 Table 1 under a zero-based acceptance plan, requiring zero non-conformances in the sampled lot unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes default to major. Inspection and acceptance occur at the manufacturer’s origin, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, including special code 33 for shelf life type. Palletization follows DLA packaging requirements, and shipment must use the fastest traceable method, explicitly prohibiting parcel post. The contract incorporates technical and quality requirements from the DLA Master List, and the supplier is responsible for compliance with all referenced standards including removal of government identification from non-accepted supplies. The total price is set at $4.00 per unit, with no variance allowed in quantity delivery.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL COM
Solicitation # SPE4A7-26-T-606Z
The contract pertains to the procurement of two support structural components for aircraft, identified by NSN 1560-00-795-8779, under solicitation SPE4A7-26-T-606Z, with a delivery deadline of 151 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The supplier must comply with DLA packaging standards, source approval documentation, and inspection and acceptance procedures conducted at the point of origin. Export control restrictions apply due to the presence of technical data subject to ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons, whether within the U.S. or abroad, and restricting access to contractors with approved JCP certification, completed DLA training, and formal authorization. Configuration changes require formal Engineering Change Proposal requests for any deviations or waivers. The item does not require Unique Identification per the Service customer’s request, though physical marking and removal of government identification from non-accepted supplies are mandated. Cybersecurity requirements include CMMC Level 2 certification for third-party assessors, and covered defense information is subject to applicable DFARS provisions. Delivery is designated to Tinker AFB, Oklahoma, with primary point of contact provided for procurement inquiries.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-606S
The item specified is a SPACER, SLEEVE with NSN 5365-01-668-5878, quantity of one unit, to be delivered within 20 days after order placement under purchase request 7017673422. The contract solicitation number is SPE4A7-26-T-606S, issued on August 3, 2026, with responses due by August 11, 2026. This procurement falls under NAICS code 332119 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance located in Mechanicsburg, Pennsylvania, 17050-2411. The technical specifications referenced are drawn from the DLA Master List of Technical and Quality Requirements, incorporating requirements identified by R and I numbers. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements, and the supplier must be a certified C3PAO. The procurement includes strict compliance with DLA packaging standards and mandates the removal of government identification from non-accepted supplies. The supplied technical data is classified as export-controlled under either ITAR or EAR, and its dissemination to foreign persons, including non-U.S. citizens within the United States, is prohibited without explicit authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is required, and only contractors with an approved U.S./Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA export-controlled data questionnaire, are permitted to access or handle this data. The contracting officer for this solicitation is Grayson Andrews, reachable via email at grayson.andrews@dla.mil. All parties must adhere to these stringent safeguards to ensure national security compliance throughout the supply chain.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details